[Epidemiological investigation of constipation in urban areas of Hangzhou, China].

Objective: To determine the prevalence and risk factors of constipation in Hangzhou urban areas by analyzing data from a recent epidemiological survey. Methods: From August 2022 to June 2023, a cross-sectional survey was conducted on 43 communities on eight streets in suburbs of Hangzhou, including Wangjiang, Sijiqing, Puyan, Changhe, Ziyang, Xiaoshanchengxiang, Zhuantang, and Banshan. Written questionnaires were filled out face to face by community doctors. The prevalence of constipation was investigated using a combination of the Bristol stool typing method and the Rome IV criteria. The risk factors for constipation were analyzed using multivariate logistic regression analysis. Results: The study cohort comprised 10,479 participants, 5551 of whom were male (53.0%) and 4928 female (47.0%). The overall prevalence of constipation was 10.6% (1107/10,479). The prevalence was 11.0% (613/5551) for male and 10.0% (494/4928) for female participants; this difference is not statistically significant (P>0.05).There were no significant differences in the prevalence of constipation between different categories of body mass index (P>0.05). The prevalence of constipation was highest in individuals aged 70 years and above, accounting for 15.4% (264/1717) of all cases. There were significant differences in the prevalence of constipation between different occupations, marital statuses, and educational levels (P<0.001). Patients with hypertension or diabetes mellitus had a higher prevalence of constipation than those without these conditions, those who had been taking long-term medication had a higher prevalence of constipation than those who did not, parents of children with constipation had a higher prevalence of constipation than those with children who did not have constipation, and there were other significant differences in various variables (P<0.001). Multivariate logistic regression analysis of modifiable factors revealed that eating less fruit (OR=1.284, 95%CI: 1.061-1.553, P=0.010), liking spicy and salty food (OR=1.234, 95%CI: 1.039-1.466, P=0.016), sleeping for too long (OR=1.644, 95%CI: 1.260-2.144, P<0.001), irregular sleep patterns (OR=1.370, 95%CI: 1.127-1.665, P=0.002) and minimal exercise (OR=1.388, 95% CI: 1.168-1.649, P<0.001) were all risk factors for constipation; whereas mix diets (OR=0.709,95%CI:0.608-0.826, P<0.001), meat diets (OR=0.604,95%CI: 0.495-0.736, P<0.001), moderate alcohol consumption (OR=0.659, 95% CI: 0.534-0.812, P<0.001), less or no drinking (OR=0.523, 95% CI: 0.428-0.638, P<0.001), and non-smoking (OR=0.819, 95%CI:0.674-0.995, P<0.001) protected against constipation. We found no association between dietary preferences and the risk of constipation (refined grains: OR=1.147, 95%CI:0.944-1.393, P=0.167; no specific preference: OR=0.935, 95%CI:0.783-1.117, P=0.459). The rate of agreement between self-evaluation of constipation by the respondents and objective criteria was higher for negatives (95.8%) than for positives (38.0%). Conclusion: The prevalence of constipation is relatively high in the urban population of Hangzhou. A good lifestyle and diet can significantly reduce its incidence. There should be more emphasis on preventive education, promotion of prevention of constipation, and advocacy for a healthy lifestyle.

Laser-patterned paper-based flow-through filters and lateral flow immunoassays to enable the detection of C-reactive protein.

We report the use of a laser-based fabrication process in the creation of paper-based flow-through filters that when combined with a traditional lateral flow immunoassay provide an alternative pathway for the detection of a pre-determined analyte over a wide concentration range. The laser-patterned approach was used to create polymeric structures that alter the porosity of the paper to produce porous flow-through filters, with controllable levels of porosity. When located on the top of the front end of a lateral flow immunoassay the flow-through filters were shown to block particles (of known sizes of 200 nm, 500 nm, 1000 nm and 3000 nm) that exceed the effective pore size of the filter while allowing smaller particles to flow through onto a lateral flow immunoassay. The analyte detection is based on the use of a size-exclusive filter that retains a complex (∼3 µm in size) formed by the binding of the target analyte with two antibodies each of which is tagged with different-sized labels (40 nm Au-nanoparticles and 3 µm latex beads), and which is larger than the effective pore size of the filter. This method was tested for the detection of C-reactive protein in a broad concentration range from 10 ng/ml to 100,000 ng/ml with a limit-of-detection found at 13 ng/ml and unlike other reported methods used for analyte detection, with this technique we are able to counter the Hook effect which is a limiting factor in many lateral flow immunoassays.

[Impact of hypoxia-reoxygenation environment on autophagy level of osteoblasts].

Objective: To investigate the impact of hypoxia-reoxygenation environment on the level of autophagy in osteoblasts. Methods: Osteoblasts were purified from the skulls of newborn SD rats within 24-48 hours by tissue block adherence culture and differential centrifugation. The osteoblasts were identified by alizarin red staining and alkaline phosphatase staining. The third generation osteoblasts were cultured in normal state and randomly divided into four groups: group A was cultured under normal condition for 36 hours; group B was cultured under normal condition for 18 hours, then under hypoxia for 18 hours; group C was cultured under hypoxia for 36 hours; group D was cultured under hypoxia for 18 hours, and then under normal condition for 18 hours. The ability to form calcium nodules of osteoblasts in the four groups was observed after culture. The proliferation activity of osteoblasts was detected by CCK-8 assay. The expressions of autophagy specified gene Beclin 1, microtubule-associated protein light chain 3(LC3) and collagen Ⅰ(COL-Ⅰ), bone morphogenetic protein 2 (BMP-2) genes were detected by real time polymerase chain reaction (RT-PCR), and the protein expressions of Beclin 1, LC3-Ⅰ,LC3-Ⅱ and P62 were detected by immunoblotting. Results: Alizarin red staining showed that osteoblasts in group A had the strongest calcification ability, and calcification ability of osteoblasts in group B,C and D lowered gradually, and it was lowest in group D. The proliferative activity under the CCK-8 detection in group A, B, C and D was 98%±8%, 90%±8%,82%±9%,76%±8%, respectively (F=35.764, P=0.000). The mRNA expression of Beclin 1, LC3-Ⅱthe 4 groups increased gradurally (group D> group C> group B> group A)(F=38.327, 16.583, both P<0.05); and the mRNA expression of COL-Ⅰ, BMP-2 decreased gradually in the 4 groups (group A> group B> group C> group D) (F=20.387, 12.426, both P<0.05). The protein expression of Beclin 1,LC3-Ⅱ/LC3-Ⅰ increased gradually in the groups (group D>group C>group B>group A) (F=26.843, 28.576, bothP<0.05), and the expression of P62 protein decreased gradually (F=18.946, P=0.011). Conclusions: Hypoxia-reoxygenation environment can reduce the proliferation activity of osteoblasts and up-regulate the expression of autophagy-related genes in osteoblasts. Anoxic reoxygenation environment promotes the increasing of autophagy levels in osteoblasts.

[Endoscopic keel placementto treat and prevent-bilateral vocal cord adhension].

Objective: To investigate the effectiveness of endoscopic keel placement for the prevention and treatment of bilateral vocal cord adhesion. Method: There are 47 cases with bilateral vocal cord lesions and 38 cases with laryngeal adhesion in this study. Bilateral vocal cord lesions were removed and laryngeal adhesion was cut and divided. Afterwards, a silicone keel was placed in each case using a Lichtenberger endo-extralaryngeal needle carrier. The keel was removed 4 weeks post-surgery and the vocal cords were observed using a laryngoscopy monthly. Result: During the 1-year follow-up, 39 (83.0%) cases with bilateral vocal cord lesions and 28(73.7%) cases with laryngeal adhesion did not develop laryngeal webs. A pseudomembrane covering the vocal cords was observed at the time of keel removal in 16 cases of all. Unfortunately, 15 cases (93.75%) developed laryngeal webs among them. However, in the cases without a pseudomembrane, only 3 (4.35%) cases formed glottic webs post-surgery(P<0.01). Conclusion: Endoscopic keel placement is an effective method for the prevention and treatment of bilateral vocal cord adhesion. The pseudomembrane detected at the time of keel removal is probably a risk factor for the development of glottic webs.

Effect of ammonia on methane production pathways and reaction rates in acetate-fed biogas processes.

In order to understand the correlation between ammonia and methanogenesis metabolism, methane production pathways and their specific rates were studied at total ammonium nitrogen (TAN) concentrations of 0.14-9 g/L in three methanogenic sludges fed with acetate, at both mesophilic and thermophilic conditions. Results showed that high levels of TAN had significant inhibition on methanogenesis; this could, however, be recovered via syntrophic acetate oxidation (SAO) coupled with Hydrogenotrophic Methanogenesis (HM) performed by acetate oxidizing syntrophs or through Acetoclastic Methanogenesis (AM) catalyzed by Methanosarcinaceae, after a long lag phase >50 d. Free ammonia (NH3) was the active component for this inhibition, of which 200 mg/L is suggested as the threshold for the pathway shift from AM to SAO-HM. Methane production rate via SAO-HM at TAN of 7-9 g/L was about 5-9-fold lower than that of AM at TAN of 0.14 g/L, which was also lower than the rate of AM pathway recovered at TAN of 7 g/L in the incubations with a French mesophilic inoculum. Thermophilic condition favored the establishment of the SAO-catalyzing microbial community, as indicated by the higher reaction rate and shorter lag phase. The operational strategy is thus suggested to be adjusted when NH3 exceeds 200 mg/L.

Laser direct-write for fabrication of three-dimensional paper-based devices.

We report the use of a laser-based direct-write (LDW) technique that allows the design and fabrication of three-dimensional (3D) structures within a paper substrate that enables implementation of multi-step analytical assays via a 3D protocol. The technique is based on laser-induced photo-polymerisation, and through adjustment of the laser writing parameters such as the laser power and scan speed we can control the depths of hydrophobic barriers that are formed within a substrate which, when carefully designed and integrated, produce 3D flow paths. So far, we have successfully used this depth-variable patterning protocol for stacking and sealing of multi-layer substrates, for assembly of backing layers for two-dimensional (2D) lateral flow devices and finally for fabrication of 3D devices. Since the 3D flow paths can also be formed via a single laser-writing process by controlling the patterning parameters, this is a distinct improvement over other methods that require multiple complicated and repetitive assembly procedures. This technique is therefore suitable for cheap, rapid and large-scale fabrication of 3D paper-based microfluidic devices.

Engineering fluidic delays in paper-based devices using laser direct-writing.

We report the use of a new laser-based direct-write technique that allows programmable and timed fluid delivery in channels within a paper substrate which enables implementation of multi-step analytical assays. The technique is based on laser-induced photo-polymerisation, and through adjustment of the laser writing parameters such as the laser power and scan speed we can control the depth and/or the porosity of hydrophobic barriers which, when fabricated in the fluid path, produce controllable fluid delay. We have patterned these flow delaying barriers at pre-defined locations in the fluidic channels using either a continuous wave laser at 405 nm, or a pulsed laser operating at 266 nm. Using this delay patterning protocol we generated flow delays spanning from a few minutes to over half an hour. Since the channels and flow delay barriers can be written via a common laser-writing process, this is a distinct improvement over other methods that require specialist operating environments, or custom-designed equipment. This technique can therefore be used for rapid fabrication of paper-based microfluidic devices that can perform single or multistep analytical assays.

Laser-induced photo-polymerisation for creation of paper-based fluidic devices.

Paper-based microfluidics is a rapidly progressing inter-disciplinary technology driven by the need for low-cost alternatives to conventional point-of-care diagnostic tools. For transport of reagents/analytes, such devices often consist of interconnected hydrophilic fluid-flow channels that are demarcated by hydrophobic barrier walls that extend through the thickness of the paper. Here, we present a laser-based fabrication procedure that uses polymerisation of a photopolymer to produce the required fluidic channels in paper. Experimental results showed that the structures successfully guide the flow of fluids and allow containment of fluids in wells, and hence the technique is suitable for fabrication of paper-based microfluidic devices. The minimum width for the hydrophobic barriers that successfully prevented fluid leakage was ~120 µm and the minimum width for the fluidic channels that can be formed was ~80 µm, the smallest reported so far for paper-based fluidic patterns.

Application of biochar from sewage sludge to plant cultivation: Influence of pyrolysis temperature and biochar-to-soil ratio on yield and heavy metal accumulation.

Applying biochar products from sewage sludge (SS) pyrolysis as soil amendment for plant cultivation was investigated in this study with special attention paid to heavy metal accumulation in the plants when pyrolysis temperature and biochar-to-soil mass ratio (C:S) were changed. Biochar obtained at four different temperatures were adopted as soil amendment for Allium sativum L. garlic plant cultivation. Experimental results revealed that biochars were rich in nutrient contents and they improved garlic yields. Although contents of heavy metals including As, Zn, Pb, Ni, Cd, Cr and Cu, etc. were elevated in the biochars compared to local soil, they fell within the acceptable limits for land application and SS is a suitable biochar resource, especially biochar produced at 450°C had rich micropores, relatively stable functional groups in structure and rugged surface to contact well with soil, conducive to its usage as a biochar. The garlic grew faster when planted in the biochar-amended soil and had higher final dry matter yields than those planted in the reference soil, especially biochar produced at 450°C corresponding to the highest final yields. The C:S ratio related to the highest garlic yields changed when the pyrolysis temperature was changed and this ratio was 1:4 for the biochar produced at 450°C. General heavy metal accumulation in the garlic occurred only for the most enriched Zn and Cu, and mainly in the roots & bulbs; in addition this bioaccumulation was increasing as leaching from biochar increased but not increasing with C:S ratio. The garlic planted in soil amended with biochar of 450°C contained the lowest level of heavy metals compared to other biochars. Those results indicated that heavy metal accumulation in plants can be inhibited through proper pyrolysis temperature choice and prevention of heavy metal leaching from the SS biochar.

The combined effect of bacteria and Chlorella vulgaris on the treatment of municipal wastewaters.

Impacts of Chlorella vulgaris with or without co-existing bacteria on the removal of nitrogen, phosphorus and organic matter from wastewaters were studied by comparing the wastewater treatment effects between an algae-bacteria consortium and a stand-alone algae system. In the algae-bacteria system, C.vulgaris played a dominant role in the removal of nitrogen and phosphorus, while bacteria removed most of the organic matter from the wastewater. When treating unsterilized wastewater, bacteria were found to inhibit the growth of algae at >231 mg/L dissolved organic carbon (DOC). Using the algae-bacteria consortium resulted in the removal of 97% NH4(+), 98% phosphorus and 26% DOC at a total nitrogen (TN) level of 29-174 mg/L. The reaction rate constant (k) values in sterilized and unsterilized wastewaters were 2.17 and 1.92 mg NH4(+)-N/(mg algal cell ·d), respectively.

Cultivation of Chlorella vulgaris on wastewater containing high levels of ammonia for biodiesel production.

The feasibility of cultivating Chlorella vulgaris with wastewater containing high ammonia nitrogen concentrations was examined. The average specific growth rate of C. vulgaris was 0.92 d(-1) at 17 mg L(-1) NH4+-N, but declined to 0.33 d(-1) at NH4+-N concentrations of 39-143 mg L(-1). At 39 mg L(-1) NH4+-N, lipid productivity reached a maximum value (23.3 mg L(-1)d(-1)) and dropped sharply at higher NH4+-N levels, which demonstrated NH4+-N should be controlled for biodiesel production. C16 and C18 fatty acids accounted for 80% of total fatty acids. Increasing NH4+-N from 17 to 207 mg L(-1) yielded additional short-chain and saturated fatty acids. Protein content was in positive correlation with NH4+-N content from 17 mg L(-1) (12%) to 207 mg L(-1) (42%). Carbohydrate in the dried algae cell was in the range of 14-45%, with a peak value occurring at 143 mg L(-1) NH4+-N. The results demonstrate that product quality can be manipulated by NH4+-N concentrations of the initial feeds.

Comparison of different fluorescence spectrum analysis techniques to characterize humification levels of waste-derived dissolved organic matter.

In the present work, the humification level of waste-derived dissolved organic matter (DOM) at different waste biostability was investigated, by using fluorescent excitation-emission matrix (EEM) scanning. Different fluorescence spectrum analysis techniques were applied and compared. Experimental results demonstrate that parallel factor (PARAFAC) analysis was sensitive to reflect DOM humification, and the most reasonable to deconstruct DOM compositions, when compared with other spectrum analysis techniques. It suggests applying the DOM-EEM-PARAFAC pipeline for rapid estimation of waste biostability.

Synergetic effect of pH and biochemical components on bacterial diversity during mesophilic anaerobic fermentation of biomass-origin waste.

AIMS: To investigate the synergetic effect of pH and biochemical components on bacterial community structure during mesophilic anaerobic degradation of solid wastes with different origins, and under acidic or neutral conditions. METHODS AND RESULTS: The bacterial community in 16 samples of solid wastes with different biochemical compositions and origins was evaluated during mesophilic anaerobic degradation at acidic and neutral pH. Denaturing gradient gel electrophoresis (DGGE) and single-strand conformation polymorphism (SSCP) were used to compare the communities. Multivariate analysis of the DGGE and SSCP results revealed that most of the dominant microbes were dependent on the content of easily degradable carbohydrates in the samples. Furthermore, the dominant microbes were divided into two types, those that preferred an acid environment and those that preferred a neutral environment. A shift in pH was found to change their preference for medium substrates. Although most of the substrates with similar origin and biochemical composition had similar microbial diversity during fermentation, some microbes were found only in substrates with specific origins. For example, two microbes were only found in substrate that contained lignocellulose and animal protein without starch. These microbes were related to micro-organisms that are found in swine manure, as well as in other intestinal or oral niches. In addition, the distribution of fermentation products was less sensitive to the changes in pH and biochemical components than the microbial community. CONCLUSIONS: Bacterial diversity during anaerobic degradation of organic wastes was affected by both pH and biochemical components; however, pH exerted a greater effect. SIGNIFICANCE AND IMPACT OF THE STUDY: The results of this study reveal that control of pH may be an effective method to produce a stable bacterial community and relatively similar product distribution during anaerobic digestion of waste, regardless of variation in the waste feedstocks.

Anaerobic biodegradation of cellulosic material: batch experiments and modelling based on isotopic data and focusing on aceticlastic and non-aceticlastic methanogenesis.

Utilizing stable carbon isotope data to account for aceticlastic and non-aceticlastic pathways of methane generation, a model was created to describe laboratory batch anaerobic decomposition of cellulosic materials (office paper and cardboard). The total organic and inorganic carbon concentrations, methane production volume, and methane and CO(2) partial pressure values were used for the model calibration and validation. According to the fluorescent in situ hybridization observations, three groups of methanogens including strictly hydrogenotrophic methanogens, strictly aceticlastic methanogens (Methanosaeta sp.) and Methanosarcina sp., consuming both acetate and H(2)/H(2)CO(3) as well as acetate-oxidizing syntrophs, were considered. It was shown that temporary inhibition of aceticlastic methanogens by non-ionized volatile fatty acids or acidic pH was responsible for two-step methane production from office paper at 35 degrees C where during the first and second steps methane was generated mostly from H(2)/H(2)CO(3) and acetate, respectively. Water saturated and unsaturated cases were tested. According to the model, at the intermediate moisture (150%), much lower methane production occurred because of full-time inhibition of aceticlastic methanogens. At the lowest moisture, methane production was very low because most likely hydrolysis was seriously inhibited. Simulations showed that during cardboard and office paper biodegradation at 55 degrees C, non-aceticlastic syntrophic oxidation by acetate-oxidizing syntrophs and hydrogenotrophic methanogens were the dominant methanogenic pathways.

Impact of recycled effluent on the hydrolysis during anaerobic digestion of vegetable and flower waste.

Two trials were established to investigate the effect of recycled effluent on hydrolysis during anaerobic co-digestion of vegetable and flower waste. Trial I evaluated the effect by regulating the flow rate of recycled effluent, while Trial II regulated the ratio of hydrolytic effluent to methanogenic effluent, which were recycled to hydrolysis reactor. Results showed that the recirculation of methanogenic effluent could enhance the buffer capability and operation stability of hydrolysis reactor. Higher recycled flow rate was favourable for microbial anabolism and further promoted hydrolysis. After 9 days of hydrolysis, the cumulative SCOD in the hydrolytic effluent reached 334, 407, 413, 581 mg/g at recycled flow rates of 0.1, 0.5, 1.0, 2.0 m3/(m3 x d), respectively. It was feasible to recycling a mixture of hydrolytic and methanogenic effluent to the hydrolysis reactor. This research showed that partially introducing hydrolytic effluent into the recycled liquid could enhance hydrolysis, while excessive recirculation of hydrolytic effluent will inhibit the hydrolysis. The flow ratio 1:3 of hydrolytic to methanogenic effluent was found to provide the highest hydrolysis efficiency and degradation rate of lignocelluloses-type biomass, among four ratios of 0:1, 1:3, 1:1 and 3:1. Under this regime, after 9 days of hydrolysis, the cumulative TOC and TN in the hydrolytic effluent reached 162 mg/g and 15 mg/g, the removal efficiency of TS, VS, C and cellulose in the solid phase were 60.66%, 62.88%, 58.35% and 49.12%, respectively. The flow ratio affected fermentation pathways, i.e. lower ratio favoured propionic acid fermentation and the generation of lactic acid while higher ratio promoted butyric acid fermentation.

Partition of six phthalic acid esters in soluble and solid residual fractions of wastewater sludges.

Distributions of six priority controlled Phthalic acid esters (PAEs), including di-methyl phthalate (DMP), di-ethyl phthalate (DEP), di-butyl phthalate (DBP), benzyl butyl phthalate (BBP), di-(2-ethylhexyl) phthalate (DEHP), di-octyl phthalate (DOP) were studied based on soluble and insoluble fractions of sludge samples collected at four wastewater treatment plants in Shanghai, China. Three sludge samples comprised hydrophilic colloidal particles of high protein contents and low aromaticity. Meanwhile, these sludges contained DBP of 4.2 to approximately 5.7 mg kg(-1) dried solids (ds) and DEHP of 21.1 to approximately 55.6 mg kg(-1) ds, respectively. Another sludge sample comprised mainly hydrophobic colloidal particles of humic substances and high aromaticity. It contained DBP of 1.18 mg kg(-1) ds and DEHP of 2.89 mg kg(-1) ds, respectively. The most abundant components noted amongst the six studied PAEs were DBP and DEHP, which mostly associated with the insoluble fraction of sludge. Specifically, the DBP and DEHP in insoluble fraction (the solid residual phase) accounted for 89.8 to approximately 98.2% and 88.6 to approximately 99.6% of those in the whole sludge. The partition coefficients of DBP and DEHP for the soluble and insoluble fractions of sludge correlated with the suspension SUVA254, suggesting that interaction between pi-electrons of DBP or DEHP and those of organic particulates in suspension contributes most of the sorption processes.

Role of dissolved humic substances surrogates on phthalate esters migration from sewage sludge.

The facilitated transport of dibutyl phthalate (DBP) and di(2-ethylhexyl) phthalate (DEHP), the priority endocrine disrupting chemicals in sludge, by dissolved humic substances (HS) was evaluated by batch extraction. The DBP, much less hydrophobic than DEHP, was inclined to migrate from sludge matrix into humic substances solutions, while the DEHP could not migrate facilitated by most humic and fulvic acids solutions, except the humic acid surrogate of high humification. This result revealed that the affinity of DEHP in sludge matrix exceeded DBP and was not susceptible by weak HS. The hydrophobic property controlled the association of phthalic acid esters on sludge residual phases. Migration rate of DBP was positively correlated to the weight-average molecular weight of HS surrogates and the aromatic extents of HA. Some functional groups in HS molecules benefited to the facilitated transport of DBP.

Bacterial community dynamics and product distribution during pH-adjusted fermentation of vegetable wastes.

AIMS: To estimate the effect of pH on the structures of bacterial community during fermentation of vegetable wastes and to investigate the relationship between bacterial community dynamics and product distribution. METHODS AND RESULTS: The bacterial communities in five batch tests controlled at different pH values [uncontrolled (about pH 4), 5, 6, 7 and 8] were monitored by denaturing gradient gel electrophoresis (DGGE) and single-strand conformation polymorphism (SSCP). The two fingerprinting methods provided consistent results and principal component analysis indicated a close similarity of bacterial community at pH 7 and 8 in addition to those at pH 4-6. This clustering also corresponded to dominant metabolic pathway. Thus, pH 7-8 shifted from alcohol-forming to acid-forming, especially butyric acid, whereas both alcohol-forming and acid-forming dominated at pH 5-6, and at pH 4, fermentation was inhibited. Shannon-weaver index was calculated to analyse the DGGE profiles, which revealed that the bacterial diversities at pH 7 and 8 were the highest while those at pH 5 and 4 (uncontrolled) were the lowest. According to sequencing results of the bands excised from DGGE gels, lactic acid bacteria and Clostridium sp. were predominant at all pH values, but varieties in species were observed as pH changed and time prolonged. CONCLUSIONS: The bacterial community during fermentation was materially influenced by pH and the diverse product distribution was related to the shift of different bacterial population. SIGNIFICANCE AND IMPACT OF THE STUDY: The study reveals that the impact of pH on fermentation product distribution is implemented primarily by changes of bacterial community. It also provides information about the comparison of two fingerprinting methods, DGGE and SSCP.

Sludge production and management processes: case study in China.

In 2010, the sewage sludge production rate will be 178,500 t dried solids (ds) for Beijing and 294,000 t-ds for Shanghai, respectively. Beijing adopts a centralized system to stabilize 78% of her sludge in three rural Stabilization Centres. Aerated composting technique will be used. Shanghai on the contrary decentralizes the management plan to treat the sludge on site. Diverse treatment trains, such as aerobic/anaerobic digestion, drying, incineration, and composting will be applied. Production rate, treatment plan, and the associated costs, energy consumption, carbon dioxide emission, and risk assessment for heavy metals and pathogens on human health were evaluated in this report for sludges yielded in Beijing and Shanghai, China.