ABSTRACT
OBJECTIVE: Management of extensive acetabular bone defects in total hip arthroplasty (THA) remains challenging. This study aims to investigate the feasibility and preliminary outcomes of 3D-printed personalized porous acetabular components for the reconstruction of acetabular defects in primary THA. METHODS: This retrospective study involved seven patients who received 3D-printed acetabular components in primary THA between July 2018 and March 2021. Preoperatively, acetabular bone defects were evaluated by referencing the Paprosky classification. There were two "Paprosky type IIIA" defects and five "Paprosky type IIIB" defects. The acetabular components were custom-made for each patient to reconstruct the extensive acetabular defects. The hip function was assessed according to the Harris hip score (HHS). Clinical and radiographic outcomes were assessed. RESULTS: The average follow-up period was 40 months, ranging from 26 to 57 months. There were no patients lost to follow-up. The HHS improved from 44 (range: 33-53) before the operation to 88 (range: 79-93) at the final follow-up. Postoperative X-rays showed that the 3D-printed personalized components were properly fitted with the acetabulum. The average center of rotation (COR) discrepancy was 2.3 mm horizontally and 2.1 mm vertically, respectively. Tomosynthesis-Shimadzu metal artifact reduction technology images showed that the implant was in close contact with the host bone. Moreover, no complications were observed during the follow-up period, including loosening, dislocation, or component protrusion. CONCLUSION: The implantation of 3D-printed personalized acetabular components showed accurate reconstruction, stable mechanical support, and favorable function at short-term follow-up. This may be a viable alternative method for reconstructing extensive acetabular defects in THA.
Subject(s)
Acetabulum , Arthroplasty, Replacement, Hip , Hip Prosthesis , Printing, Three-Dimensional , Prosthesis Design , Humans , Arthroplasty, Replacement, Hip/methods , Acetabulum/surgery , Retrospective Studies , Female , Male , Middle Aged , Aged , Adult , Porosity , Feasibility StudiesABSTRACT
PURPOSE: The spinopelvic reconstruction poses significant challenges following total sacrectomy in patients with malignant or aggressive benign bone tumours encompassing the entire sacrum. In this study, we aim to assess the functional outcomes and complications of an integrated 3D-printed sacral endoprostheses featuring a self-stabilizing design, eliminating the requirement for supplemental fixation. METHODS: We retrospectively analyzed patients with sacral tumours who underwent total sacrectomy followed by reconstruction with 3D-printed self-stabilizing endoprosthesis. Clinically, we evaluated functional outcomes using the 1993 version of the musculoskeletal tumour society (MSTS-93) score. Perioperative and postoperative complications were also documented. RESULTS: 10 patients met final inclusion criteria. The median age was 49 years (range, 31-64 years). The median follow-up time was 26.5 months (range, 15-47 months). Median postoperative functional MSTS-93 was 22.5 (range, 13-25). The median operation time was 399.5 min (305-576 min), and the median intraoperative blood loss was and 3200 ml (2400-7800 ml). Complications include wound dehiscence in one patient, bowel, bladder, and sexual dysfunction in four patients, cerebrospinal fluid leak in one patient, and tumour recurrence in one patient. There were no mechanical complications related to the endoprosthesis at the last follow-up. CONCLUSION: The utilization of 3D-printed self-stabilizing endoprosthesis proved to be a viable approach, yielding satisfactory short-term outcomes in patients undergoing total sacral reconstruction without supplemental fixation.
ABSTRACT
BACKGROUND: Talar malignant tumor is extremely rare. Currently, there are several alternative management options for talus malignant tumor including below-knee amputation, tibio-calcaneal arthrodesis, and homogenous bone transplant while their shortcomings limited the clinical application. Three-dimensional (3D) printed total talus prosthesis in talus lesion was reported as a useful method to reconstruct talus, however, most researches are case reports and its clinical effect remains unclear. Therefore, the current study was to explore the application of 3D printed custom-made modular prosthesis in talus malignant tumor. METHODS: We retrospectively analyzed the patients who received the 3D printed custom-made modular prosthesis treatment due to talus malignant tumor in our hospital from February 2016 to December 2021. The patient's clinical data such as oncology outcome, operation time, and volume of blood loss were recorded. The limb function was evaluated with the Musculoskeletal Tumor Society 93 (MSTS-93) score, The American Orthopedic Foot and Ankle Society (AOFAS) score; the ankle joint ranges of motion as well as the leg length discrepancy were evaluated. Plain radiography and Tomosynthesis-Shimadzu Metal Artefact Reduction Technology (T-SMART) were used to evaluate the position of prosthesis and the osseointegration. Postoperative complications were recorded. RESULTS: The average patients' age and the follow-up period were respectively 31.5 ± 13.1 years; and 54.8 months (range 26-72). The medium operation time was 2.4 ± 0.5 h; the intraoperative blood loss was 131.7 ± 121.4 ml. The mean MSTS-93 and AOFAS score was 26.8 and 88.5 respectively. The average plantar flexion, dorsiflexion, varus, and valgus were 32.5, 9.2, 10.8, and 5.8 degree respectively. One patient had delayed postoperative wound healing. There was no leg length discrepancy observed in any patient and good osseointegration was observed on the interface between the bone and talus prosthesis in all subjects. CONCLUSION: The modular structure of the prosthesis developed in this study seems to be convenient for prosthesis implantation and screws distribution. And the combination of solid and porous structure improves the initial stability and promotes bone integration. Therefore, 3D printed custom-made modular talus prosthesis could be an alternative option for talus reconstruction in talus malignant tumor patients.
Subject(s)
Bone Neoplasms , Printing, Three-Dimensional , Prosthesis Design , Talus , Humans , Talus/surgery , Talus/diagnostic imaging , Male , Adult , Female , Bone Neoplasms/surgery , Bone Neoplasms/diagnostic imaging , Retrospective Studies , Middle Aged , Young Adult , Prosthesis Implantation/methods , Prosthesis Implantation/instrumentation , Adolescent , Ankle Joint/surgery , Ankle Joint/diagnostic imaging , Osseointegration , Treatment Outcome , Range of Motion, Articular , Prostheses and ImplantsABSTRACT
OBJECTIVE: This study aims to biomimetic design a new 3D-printed lattice hemipelvis prosthesis and evaluate its clinical efficiency for pelvic reconstruction following tumor resection, focusing on feasibility, osseointegration, and patient outcomes. METHODS: From May 2020 to October 2021, twelve patients with pelvic tumors underwent tumor resection and subsequently received 3D-printed lattice hemipelvis prostheses for pelvic reconstruction. The prosthesis was strategically incorporated with lattice structures and solid to optimize mechanical performance and osseointegration. The pore size and porosity were analyzed. Patient outcomes were assessed through a combination of clinical and radiological evaluations. RESULTS: Multiple pore sizes were observed in irregular porous structures, with a wide distribution range (approximately 300-900 µm). The average follow-up of 34.7 months, ranging 26 from to 43 months. One patient with Ewing sarcoma died of pulmonary metastasis 33 months after surgery while others were alive at the last follow-up. Postoperative radiographs showed that the prosthesis's position was consistent with the preoperative planning. T-SMART images showed that the host bone was in close and tight contact with the prosthesis with no gaps at the interface. The average MSTS score was 21 at the last follow-up, ranging from 18 to 24. There was no complication requiring revision surgery or removal of the 3D-printed hemipelvis prosthesis, such as infection, screw breakage, and prosthesis loosening. CONCLUSION: The newly designed 3D-printed lattice hemipelvis prosthesis created multiple pore sizes with a wide distribution range and resulted in good osteointegration and favorable limb function.
Subject(s)
Bone Neoplasms , Pelvic Neoplasms , Humans , Prosthesis Design , Biomimetics , Titanium , Prosthesis Implantation/methods , Pelvic Neoplasms/surgery , Bone Neoplasms/diagnostic imaging , Bone Neoplasms/surgery , Bone Neoplasms/pathology , Retrospective Studies , Treatment Outcome , Printing, Three-DimensionalABSTRACT
BACKGROUND: Fibrodysplasia ossificans progressiva (FOP) is an extremely rare disease characterized by malformation of the bilateral great toes and progressive heterotopic ossification. The clinical features of FOP occur due to dysfunction of the bone morphogenetic protein (BMP) signaling pathway induced by the mutant activin A type I receptor/activin-like kinase-2 (ACVR1/ALK2) which contributes to the clinical features in FOP. Dysregulation of the BMP signaling pathway causes the development of osteochondroma. Poor awareness of the association between FOP and osteochondromas always results in misdiagnosis and unnecessary invasive operation. CASE PRESENTATION: In this study, we present a case of classical FOP involving osteochondroma. An 18-year-old male adolescent, born with deformity of bilateral big toes, complained multiple masses on his back for 1 year. The mass initially emerged with a tough texture and did not cause pain. It was misdiagnosed as an osteochondroma. After two surgeries, the masses became hard and spread around the entire back region. Meanwhile, extensive heterotopic ossification was observed around the back, neck, hip, knee, ribs, and mandible during follow-up. Osteochondromas were observed around the bilateral knees. No abnormalities were observed in the laboratory blood test results. Whole exome sequencing revealed missense mutation of ACVR1/ALK2 (c.617G > A; p.R206H) in the patient and confirmed the diagnosis of FOP. CONCLUSION: In summary, classical FOP always behaves as a bilateral deformity of the big toes, as well as progressive ectopic ossification and osteochondromas in the distal femur and proximal tibia. An understanding of the association between osteochondromas and FOP aids in diagnosis and avoids unnecessary invasive management in patients.
Subject(s)
Myositis Ossificans , Ossification, Heterotopic , Osteochondroma , Male , Adolescent , Humans , Myositis Ossificans/genetics , Myositis Ossificans/diagnosis , Myositis Ossificans/metabolism , Mutation , Signal Transduction/physiology , Osteochondroma/geneticsABSTRACT
OBJECTIVE: Geographic defect reconstruction in load-bearing bones presents formidable challenges for orthopaedic surgeon. The use of 3D-printed personalized implants presents a compelling opportunity to address this issue. This study aims to design, manufacture, and evaluate 3D-printed personalized implants with irregular lattice porous structures for geographic defect reconstruction in load-bearing bones, focusing on feasibility, osseointegration, and patient outcomes. METHODS: This retrospective study involved seven patients who received 3D-printed personalized lattice implants for the reconstruction of geographic defects in load-bearing bones. Personalized implants were customized for each patient. Randomized dodecahedron unit cells were incorporated within the implants to create the porous structure. The pore size and porosity were analyzed. Patient outcomes were assessed through a combination of clinical and radiological evaluations. Tomosynthesis-Shimadzu metal artifact reduction technology (T-SMART) was utilized to evaluate osseointegration. Functional outcomes were assessed according to the Musculoskeletal Tumor Society (MSTS) 93 score. RESULTS: Multiple pore sizes were observed in porous structures of the implant, with a wide distribution range (approximately 300-900 um). The porosity analysis results showed that the average porosity of irregular porous structures was around 75.03%. The average follow-up time was 38.4 months, ranging from 25 to 50 months. Postoperative X-rays showed that the implants matched the geographic bone defect well. Osseointegration assessments according to T-SMART images indicated a high degree of bone-to-implant contact, along with favorable bone density around the implants. Patient outcomes assessments revealed significant improvements in functional outcomes, with the average MSTS score of 27.3 (range, 26-29). There was no implant-related complication, such as aseptic loosening or structure failure. CONCLUSION: 3D-printed personalized lattice implants offer an innovative and promising strategy for geographic defect reconstruction in load-bearing bones. This approach has the potential to match the unique contours and geometry of the geographic bone defect and facilitate osteointegration.
Subject(s)
Bone and Bones , Prostheses and Implants , Humans , Retrospective Studies , Printing, Three-Dimensional , Weight-Bearing , Porosity , Titanium/chemistryABSTRACT
BACKGROUND: Intercalary reconstruction for patients with short residual bone segments remains challenging. Three-dimensional (3D)-printed custom-made porous implants are a promising technique for short-segment fixation in these patients. This study aims to evaluate the efficiency of 3D-printed custom-made porous components (3DCPCs) for short-segment fixation, focusing on prosthesis survivorship, radiographic results, and potential complications. METHODS: This retrospective study involved 39 patients who underwent intercalary prosthetic reconstruction with 3DCPCs after tumor resection of the femur, tibia, or humerus from June 2015 to October 2020. Segment bone loss involved the femur (n = 15), tibia (n = 16), and humerus (n = 8), leaving 78 residual bone segments. There were 46 short segments requiring 46 3DCPCs and 32 segments with the ability to accommodate 32 off-the-shelf standard uncemented stems for prosthesis fixation. Clinical and functional outcomes were evaluated. Prosthesis-overall survivorship and prosthesis-specific survivorship were analyzed using Kaplan-Meier survival analysis. Radiographic results and modes of failure of using this technique were also examined. RESULTS: The mean follow-up was 41 months. The prosthesis-overall survivorship was 87.2% and 84.6% at 2 and 5 years, respectively. The prosthesis-specific survivorship was 92.1% and 89.5% at 2 and 5 years, respectively. There was not a substantial difference in prosthesis survivorship among the femur, tibia, and humerus. The average MSTS score was 26.2, ranging from 22 to 28. The radiographic evaluation results revealed excellent or good interface (38/46) in most of the 46 porous components. A total of 38 of 46 bone segments' remolding demonstrated no change. In total, seven patients (16.3%) had complications requiring further surgery. CONCLUSION: The prosthesis survivorship of using 3DCPCs for short-segment fixation is similar or better compared to other studies involving intercalary prosthetic reconstruction with short-segment fixation. Radiographic evaluation revealed good osteointegration and avoidance of stress shielding. Overall, intercalary prosthetic reconstruction with 3DCPC is a feasible modality for patients with short residual bone segments after tumor resection.
Subject(s)
Bone Neoplasms , Humans , Bone Neoplasms/diagnostic imaging , Bone Neoplasms/surgery , Retrospective Studies , Porosity , Treatment Outcome , Humerus/diagnostic imaging , Humerus/surgery , Prosthesis DesignABSTRACT
Background: Osteosarcoma is a primary malignant bone tumor with a high metastatic potential that accounts for a significant proportion of all bone tumors. The prognosis for patients with metastatic or recurrence disease remains poor. The neutrophil-to-lymphocyte ratio (NLR) has become a potential prognostic biomarker for cancer. Recent evidence suggests that the dynamic changes in neutrophil-to-lymphocyte ratio (NLR) during treatment may be more informative in predicting patient prognosis, but the value of dynamic NLR in osteosarcoma has not yet been determined. Methods: This retrospective study retrospectively analyzed the clinical information of 251 osteosarcoma patients diagnosed and treated in West China Hospital of Sichuan University, explored the impact of baseline NLR and changes in NLR during treatment on the prognosis of osteosarcoma patients, and further combined baseline NLR with Delta NLR to build an NLR staging system. Results: The results showed that both baseline NLR and delta NLR had some predictive ability for the prognosis of osteosarcoma patients (P = 6.90e-4, P = 0.022). Patients with high baseline NLR were more likely to have a decrease in delta NLR (P = 1.24e-10). The NLR stage had a better predictive ability than baseline NLR and delta NLR, and was an independent prognostic factor for overall survival in osteosarcoma patients HR: 2.456 (1.625-3.710) (P = 1.97e-05). Conclusion: NLR has value in continuous monitoring, and continuous monitoring of NLR can better predict the survival of osteosarcoma patients compared to baseline NLR.
ABSTRACT
Objective: To investigate the effectiveness of three-dimensional (3D)-printed hemi-pelvic prosthesis for revision of aseptic loosening or screw fracture of modular hemi-pelvic prosthesis. Methods: Between February 2017 and January 2020, 11 patients with aseptic loosening or screw fracture of modular hemi-pelvic prosthesis were revised using 3D-printed hemi-pelvic prostheses. There were 7 males and 4 females with an average age of 44 years (range, 25-60 years). In the first operation, all patients underwent total tumor resection, modular hemi-pelvic prosthesis reconstruction, and autologous femoral head transplantation. According to the Enneking pelvic partition system, 8 cases were resected in zones â +â ¡ and 3 cases in zones â +â ¡+â ¢. The interval from the initial operation to this revision ranged from 14.3-66.2 months, with an average of 35.8 months. The operation time, the amount of intraoperative bleeding, and the occurrence of complications were recorded. At 6 months after the first operation, before revision, and at last follow-up, the American Musculoskeletal Tumor Society (MSTS) score and Harris score were used to evaluate the recovery of lower limb function. The pain-free walking distance of patients without brace assistance was recorded at last follow-up. X-ray films were taken at 1 month after the first operation, before revision, and at 1 month after revision, the acetabulum position was assessed by the differences in weight arm and cup height between bilateral hip joints. At last follow-up, the digital X-ray tomography was taken to evaluate the prosthesis-bone integration and the occurrence of aseptic loosening. Results: The operation time was 182.6-238.0 minutes (mean, 197.4 minutes). The amount of intraoperative bleeding was 400-860 mL (mean, 550.0 mL). All incisions healed by first intention with no infection, hip dislocation, nerve damage, or vascular-related adverse events. The MSTS score and Harris score at last follow-up were significantly higher than those at 6 months after the first operation and before revision ( P<0.05), while the score before revision was significantly lower than that at 6 months after the first operation ( P<0.05). At last follow-up, the patients were able to walk more than 1 000 meters painlessly without brace assistance. Imaging review showed that the difference of cup height at 1 month after revision was significantly lower than that at 1 month after the first operation and before revision, and at 1 month after the first operation than before revision operation, and the differences were significant ( P<0.05). There was no significant difference in the difference of weight arm among three time points ( P>0.05). All prostheses were well integrated, and no aseptic loosening of the prosthesis or screw fracture occurred. Conclusion: Revision with 3D-printed hemi-pelvic prostheses benefited in reconstructing stable pelvic ring and natural bodyweight transmission for patients encountering the aseptic loosening or screw fracture of modular hemi-pelvic prosthesis. Early postoperative rehabilitation training can maximize the recovery of patient limb function, reduce pain during walking, and reduce the incidence of complications.
Subject(s)
Arthroplasty, Replacement, Hip , Fractures, Bone , Hip Prosthesis , Neoplasms , Male , Female , Humans , Adult , Arthroplasty, Replacement, Hip/methods , Treatment Outcome , Prosthesis Failure , Fractures, Bone/surgery , Retrospective StudiesABSTRACT
Objective: To investigate the long-term effectiveness of uncemented allograft-prosthesis composite (APC) for reconstruction of bone defects after proximal femur tumor resection. Methods: Between June 2007 and March 2014, 21 patients who underwent uncemented APC reconstruction of proximal femur after tumor resection were retrospectively evaluated. There were 9 males and 12 females with an average age of 33.2 years (range, 19-54 years). There were 9 cases of giant cell tumor of bone, 5 cases of osteosarcoma, 4 cases of osteoblastic osteosarcoma, 2 cases of chondrosarcoma, and 1 case of undifferentiated pleomorphic sarcoma. Thirteen cases of benign bone tumors were all classified as stage 3 by Enneking staging; and 8 cases of malignant bone tumors were classified as grade â ¡B in 7 cases and grade â ¡A in 1 case according to the American Joint Committee on Cancer (AJCC) staging system. Among them, 7 patients underwent reoperation after recurrence, and the rest were primary operations; 8 patients presented with pathological fractures. The preoperative Harris hip score (HHS) and American Musculoskeletal Tumor Society (MSTS) score was 40 (30, 49) and 9.1±3.5, respectively. The length of osteotomy was 80-154 mm, with an average of 110 mm. At 1 year after operation and last follow-up, HHS and MSTS scores were utilized to evaluate the function of hip joint; the gluteus medius strength score was used to evaluation of the hip abduction function. Image examinations were taken at 1, 3, 6, 9, and 12 months after operation and every year thereafter to assess the union of allograft-host bone interfaces. Intra- and post-operative complications were also recorded. Results: All patients were followed up 84-163 months (mean, 123.5 months). At 1 year after operation and last follow-up, the HHS and MSTS scores significantly improved when compared with the preoperative scores ( P<0.05). However, there was no significant difference in the HHS score, MSTS score, and gluteus medius strength score between the two time points after operation ( P>0.05). Image examination showed that all allograft-host bone interfaces achieved union after 5-10 months (mean, 7.6 months). At last follow-up, all patients had bone resorption, including 11 severe cases, 4 moderate cases, and 6 mild cases; the bone resorption sites included Gruen 1, 2, and 7 regions. Complications included 10 fractures and 1 prosthetic fracture. Local recurrence occurred in 3 patients and pulmonary metastasis in 3 patients. Conclusion: Uncemented APC is a reliable method for the reconstruction of bone defects after proximal femur tumor resection. It has the good long-term effectiveness and possesses obvious advantages in the union at the bone-bone surface.
Subject(s)
Bone Neoplasms , Bone Resorption , Osteosarcoma , Adult , Female , Humans , Male , Allografts/pathology , Bone Neoplasms/surgery , Bone Resorption/etiology , Bone Resorption/pathology , Bone Transplantation/methods , Femur/surgery , Osteosarcoma/surgery , Osteosarcoma/pathology , Prostheses and Implants , Retrospective Studies , Treatment Outcome , Young Adult , Middle AgedABSTRACT
Objective: To explore the design points of a three-dimensional (3D) printed customized cementless intercalary endoprosthesis with an intra-neck curved stem and to evaluate the key points and mid-term effectiveness of its application in the reconstruction of ultrashort bone segments in the proximal femur. Methods: Between October 2015 and January 2021, 17 patients underwent reconstruction with a 3D printed-customized cementless intercalary endoprosthesis with an intra-neck curved stem. There were 11 males and 6 females, the age ranged from 10 to 76 years, with an average of 30.1 years. There were 9 cases of osteosarcoma, 4 cases of Ewing sarcoma, 2 cases of chondrosarcoma, 1 case of liposarcoma, and 1 case of myofibroblastoma. The disease duration was 5-14 months, with an average of 9.5 months. Enneking staging included 16 cases of stage â ¡B and 1 case of stage â ¢B. The distances from the center of the femoral head to the body midline and the acetabular apex were measured preoperatively on X-ray images. Additionally, the distances from the tip of the intra-neck curved stem to the body midline and the acetabular apex were measured at immediate postoperatively and last follow-up. The neck-shaft angle was also measured preoperatively, at immediate postoperatively, and at last follow-up. The status of osseointegration at the bone-prosthesis interface and bone growth into the prosthesis surface were assessed by X-ray films, CT, and Tomosynthesis-Shimadzu metal artefact reduction technology (T-SMART). The survival status of the patients, presence of local recurrence or distant metastasis, and occurrence of postoperative complications were assessed. The recovery of lower limb function was evaluated pre- and post-operatively using the Musculoskeletal Tumor Society (MSTS) scoring system, and pain relief was evaluated using the visual analogue scale (VAS) scores. Results: The patient's femoral resection length was (163.1±57.5) mm, the remaining proximal femoral length was (69.6±9.3) mm, and the percentage of femoral resection length/total femoral length was 38.7%±14.6%. All 17 patients were followed up 25-86 months with an average of 58.1 months. During the follow-up, 1 patient died of lung metastasis at 46 months postoperatively, and the remaining 16 patients survived tumor-free. There was no complication such as periprosthetic infection, delayed incision healing, aseptic loosening, prosthesis fracture, or periprosthetic fracture. No evidence of micromotion or wear around the implanted stem of the prosthesis was detected in X-ray and T-SMART evaluations. There was no significant radiolucent lines, and radiographic evidence of bone ingrowth into the bone-prosthesis interface was observed in all stems. There was no significant difference in the distance from the tip of the curved stem to the body midline and the apex of the acetabulum at immediate postoperatively and last follow-up compared with the distance from the center of the femoral head to the body midline and the apex of the acetabulum before operation, respectively (P>0.05), and there was no significant difference in the above indexes between immediate postoperatively and last follow-up (P>0.05). The differences in the neck-shaft angle at various time points before and after operation were also not significant (P>0.05). At last follow-up, the MSTS score was 26.1±1.2 and the VAS score was 0.1±0.5, which were significantly improved when compared with those before operation [19.4±2.1 and 5.7±1.0, respectively] (t=14.735, P<0.001; t=21.301, P<0.001). At last follow-up, none of the patients walked with the aid of crutches or other walkers. Conclusion: The 3D printed customized cementless intercalary endoprosthesis with an intra-neck curved stem is an effective method for reconstructing ultrashort bone segments in the proximal femur following malignant tumor resection. The operation is reliable, the postoperative lower limb function is satisfactory, and the incidence of complications is low.
Subject(s)
Artificial Limbs , Femur , Female , Male , Humans , Child , Adolescent , Young Adult , Adult , Middle Aged , Aged , Femur/surgery , Lower Extremity , Bone-Implant Interface , Femur HeadABSTRACT
BACKGROUND: The fractures of femoral neck account for 50% among hip fractures with around 3%-10% occurring in younger population of below 65 years. The newly introduced FNS as management approach appears to be a potential alternative to the traditional CCS. The aim of this study was to compare the clinical efficacy and outcome of the femoral neck system (FNS) and the cannulated cancellous screw (CCS) in the treatment of femoral neck fractures in adult below 65 years of age. METHODS: Data of 114 patients between 18-65 years, admitted in our department for femoral neck fracture from January 2019 to March 2021 were retrospectively studied and ranged into two groups based on the surgical methods: FNS group (56 patients) and CCS group (58 patients). The variables of interest including demographic and clinical variables (age, gender, fracture mechanism, injury side and classification), perioperative parameters(operation time, intraoperative bleeding, incision length and hospitalization time), postoperative outcomes and complications (fracture healing time, nonunion rate, femoral neck avascular necrosis, aseptic screw loosening and the Harris Hip Score), were analyzed and compared between the two groups. RESULTS: All 114 patients presented satisfactory reduction and were followed-up for a period of 12 to 36 months (mean 27 ± 2.07 months); there were no significant differences between both groups in terms of age, gender, fracture classification, side of injury, mechanism of injury, the operative time, intraoperative blood loss and the hospital length of stay. However, the fracture healing time between FNS group and CCS group was statistically significant (p < 0.05), respectively 2.86 ± 0.77 and 5.10 ± 0.81 months. The significant differences were also found in terms of numbers of fluoroscopies 8.34 ± 1.38 Vs 17.72 ± 2.19, the HHS 87.80 ± 1.92 Vs 84.28 ± 2.24, postoperative complications 8 (14.28%) Vs 26 (44.82) respectively in FNS and CCS group. CONCLUSION: FNS presented satisfactory outcomes had significantly lower complications rate, therefore, can be one of the alternatives for internal implantation devices in treatment of femoral neck fracture in non-geriatric population.
Subject(s)
Femoral Neck Fractures , Femur Neck , Adult , Humans , Retrospective Studies , Fracture Fixation, Internal/adverse effects , Femoral Neck Fractures/surgery , Treatment Outcome , Bone ScrewsABSTRACT
Purpose: Osteosarcoma is the most common primary malignancy of bone with a dismal prognosis for patients with pulmonary metastases. Evaluation of osteosarcoma prognosis would facilitate the prognosis consultation as well as the development of personalized treatment decisions. However, there is limited effective prognostic predictor at present. Lung Immune Prognostic Index (LIPI) is a novel prognostic factor in pulmonary cancers, whereas, the prognostic significance of LIPI in osteosarcoma has not yet been well clarified. In this study, we firstly explore the prognostic role of LIPI and further modify this predictive model in osteosarcoma. Patients and methods: A retrospectively study was conducted at Musculoskeletal Tumor Center of West China Hospital between January 2016 and January 2021. Hematological factors and clinical features of osteosarcoma patients were collected and analyzed. The area under curve (AUC) and optimal cuff-off of each single hematological factor was calculated. Results: In this study, lactate dehydrogenase (LDH), derived neurtrophil to lymphocyte ratio (dNLR), and Hydroxybutyrate dehydrogenase (HBDH) have higher AUC values. LIPI was composed of LDH and dNLR and was further modified by combing the HBDH, forming the osteosarcoma immune prognostic index (OIPI). OIPI divided 223 osteosarcoma patients divided into four groups, none, light, moderate, and severe (p < 0.0001). OIPI has a higher AUC value than LIPI and other hematological indexes in t-ROC curve. According to the univariate and multivariate analysis, pathological fracture, metastasis, NLR, platelet-lymphocyte ratio (PLR), and OIPI were associated with the prognosis; and metastasis and OIPI were independent prognostic factors of osteosarcoma patients. An OIPI-based nomogram was also established and could predict the 3-year and 5-year overall survival. In addition, OIPI was also revealed correlated with metastasis and pathological fracture in osteosarcoma. Conclusion: This study first explore the prognostic significance of LIPI in osteosarcoma patients. In addition, we developed a modified LIPI, the OIPI, for osteosarcoma patients. Both the LIPI and OIPI could predict the overall survival of osteosarcoma patients well, while OIPI may be more suitable for osteosarcoma patients. In particular, OIPI may have the ability to identify some high-risk patients from clinically low-risk patients.
ABSTRACT
BACKGROUND: Hip-preserved reconstruction for patients with ultrashort proximal femur segments following extensive femoral diaphyseal tumor resection is a formidable undertaking. A customized intercalary prosthesis with a rhino horn-designed uncemented stem was developed for the reconstruction of these extensive skeletal defects. METHODS: This study was designed to analyze and compare the differences in the biomechanical behavior between the normal femur and the femur with diaphyseal defects reconstructed by an intercalary prosthesis with different stems. The biomechanical behavior under physiological loading conditions is analyzed using the healthy femur as the reference. Five three-dimensional finite element models (healthy, customized intercalary prosthesis with four different stems implemented, respectively) were developed, together with a clinical follow-up of 12 patients who underwent intercalary femoral replacement. RESULTS: The biomechanical results showed that normal-like stress and displacement distribution patterns were observed in the remaining proximal femur segments after reconstructions with the rhino horn-designed uncemented stems, compared with the straight stem. Stem A showed better biomechanical performance, whereas the fixation system with Stem B was relatively unstable. The clinical results were consistent with the FEA results. After a mean follow-up period of 32.33 ± 9.12 months, osteointegration and satisfactory clinical outcomes were observed in all patients. Aseptic loosening (asymptomatic) occurred in one patient reconstructed by Stem B; there were no other postoperative complications in the remaining 11 patients. CONCLUSION: The rhino horn-designed uncemented stem is outstanding in precise shape matching and osseointegration. This novel prosthesis design may be beneficial in decreasing the risk of mechanical failure and aseptic loosening, especially when Stem A is used. Therefore, the customized intercalary prosthesis with this rhino horn-designed uncemented stem might be a reasonable alternative for the reconstruction of SSPF following extensive tumor resection.
Subject(s)
Arthroplasty, Replacement, Hip , Hip Prosthesis , Neoplasms , Arthroplasty, Replacement, Hip/adverse effects , Arthroplasty, Replacement, Hip/methods , Diaphyses/surgery , Femur/diagnostic imaging , Femur/surgery , Humans , Prosthesis Design , Prosthesis Failure , Prosthesis Implantation/adverse effects , Prosthesis Implantation/methods , Treatment OutcomeABSTRACT
Extraskeletal myxoid chondrosarcoma (EMC) is a rare soft tissue sarcoma. In view of the indolent course throughout the prolonged natural history of EMC, it was considered as a low-grade soft-tissue sarcoma. However, recent studies have revealed a high recurrence and metastatic potential in EMC, and the invasiveness of EMC may progress during the protracted clinical course. The mechanism for this aggressive transformation remains unknown. Here, we present a rare case of EMC with aggressive behavior. This case was confirmed via pathology and NR4A3 fluorescent in situ hybridization. To verify the genetic characteristics of this rare case, a total gene sequencing analyses was performed in the recurrent and metastatic lesions. Intriguingly, different gene mutations were determined in the recurrent and metastatic lesions, which implied the genetic heterogeneity among the different lesions might be related to the aggressiveness of EMC. Furthermore, we discuss a few potential agents against the mutated genes in this case, which may provide novel insights regarding the targeted therapy of EMC.
ABSTRACT
Purpose: The relationship between indeterminate pulmonary nodules (IPNs) and metastasis is difficult to determine. We expect to explore a predictive model that can assist in indicating the nature of IPNs, as well as predicting the probability of metachronous metastasis in osteosarcoma patients. Patients and methods: We conducted a retrospective study including 184 osteosarcoma patients at West China Hospital from January 2016 to January 2021. Hematological markers and clinical features of osteosarcoma patients were collected and analyzed. Results: In this study, we constructed an osteosarcoma immune prognostic index (OIPI) based on the lung immune prognostic index (LIPI). Compared to other hematological markers and clinical features, OIPI had a better ability to predict metastasis. OIPI divided 184 patients into four groups, with the no-OIPI group (34 patients), the light-OIPI group (35 patients), the moderate-OIPI group (75 patients), and the severe-OIPI group (40 patients) (P < 0.0001). Subgroup analysis showed that the OIPI could have a stable predictive effect in both the no-nodule group and the IPN group. Spearman's rank correlation test and Kruskal-Wallis test demonstrated that the OIPI was related to metastatic site and metastatic time, respectively. In addition, patients with IPNs in high-OIPI (moderate and severe) groups were more likely to develop metastasis than those in low-OIPI (none and light) groups. Furthermore, the combination of OIPI with IPNs can more accurately identify patients with metastasis, in which the high-OIPI group had a higher metastasis rate, and the severe-OIPI group tended to develop metastasis earlier than the no-OIPI group. Finally, we constructed an OIPI-based nomogram to predict 3- and 5-year metastasis rates. This nomogram could bring net benefits for more patients according to the decision curve analysis and clinical impact curve. Conclusion: This study is the first to assist chest CT in diagnosing the nature of IPNs in osteosarcoma based on hematological markers. Our findings suggested that the OIPI was superior to other hematological markers and that OIPI can act as an auxiliary tool to determine the malignant transformation tendency of IPNs. The combination of OIPI with IPNs can further improve the metastatic predictive ability in osteosarcoma patients.
ABSTRACT
Background: The lung immune prognostic index (LIPI), composed of serum lactate dehydrogenase (LDH) and the derived neutrophil to lymphocyte ratio (dNLR), is a novel prognostic factor of lung cancer. The prognostic effect of the LIPI has never been verified in osteosarcoma. Methods: We retrospectively reviewed the osteosarcoma patients with metachronous metastasis from January 2016 to January 2021 in West China Hospital. We collected and analyzed the clinical data and constructed the LIPI for osteosarcoma. The correlation between the LIPI and metastasis was analyzed according to the Kaplan-Meier method and Cox regression analysis with hazard ratios (HRs) and 95% confidence intervals (CIs). Univariate analysis and multivariate analysis were conducted to clarify the independent risk factors of metastasis. The nomogram model was established by R software, version 4.1.0. Results: The area under the curve (AUC) and best cutoff value were 0.535 and 91, 0.519, and 5.02, 0.594 and 2.77, 0.569 and 227.14, 0.59 and 158, and 0.607 and 2.05 for ALP, LMR, NLR, PLR, LDH, and dNLR, respectively. The LIPI was composed of LDH and dNLR and showed a larger AUC than other hematological factors in the time-dependent operator curve (t-ROC). In total, 184 patients, 42 (22.8%), 96 (52.2%), and 46 (25.0%) patients had LIPIs of good, moderate, and poor, respectively (P < 0.0001). Univariate analysis revealed that pathological fracture, the initial CT report of suspicious nodule, and the NLR, PLR, ALP, and the LIPI were significantly associated with metastasis, and multivariate analysis showed that the initial CT report of suspicious nodule and the PLR, ALP, and LIPI were dependent risk factors for metastasis. Metastatic predictive factors were selected and incorporated into the nomogram construction, including the LIPI, ALP, PLR, initial CT report, and pathological fracture. The C-index of our model was 0.71. According to the calibration plot, this predictive nomogram could accurately predict 3- and 5-year metachronous metastasis. Based on the result of decision curve and clinical impact curve, this predictive nomogram could also help patients obtain significant net benefits. Conclusion: We first demonstrated the metastatic predictive effect of the LIPI on osteosarcoma. This LIPI-based model is useful for clinicians to predict metastasis in osteosarcoma patients and could help conduct timely intervention and facilitate personalized management of osteosarcoma patients.
ABSTRACT
Bilateral acetabular fractures have long been described in seizure patients, osteoporotic acetabular insufficiency. Few cases have been reported in the context of high-velocity trauma. The bilateral traumatic acetabular fracture is very rare and complex due to the unique nature of the force and the fracture pattern. A 48-year-old female patient was admitted to our orthopedic ward for bilateral acetabular fracture after a road traffic accident. On admission, the patient presented with some associated complications susceptible to influence the prognosis. In conclusion, bilateral acetabular fracture secondary to high-velocity trauma can be successfully managed with open reduction and internal fixation, even in cases with a very high risk of surgical site infection and sepsis.
Subject(s)
Hip Fractures , Acetabulum/surgery , Female , Fracture Fixation, Internal , Hip Fractures/surgery , Humans , Middle Aged , Open Fracture ReductionABSTRACT
Osteosarcoma is the most common primary malignant bone tumor with a high metastatic potential. Nowadays, there is a lack of new markers to identify prognosis of osteosarcoma patients with response to medical treatment. Recent studies have shown that hematological markers can reflect to some extent the microenvironment of an individual with the potential to predict patient prognosis. However, most of the previous studies have studied the prognostic value of a single hematological index, and it is difficult to comprehensively reflect the tumor microenvironment of patients. Here, we comprehensively collected 16 hematological markers and constructed a hematological prognostic scoring system (HPSS) using LASSO cox regression analysis. HPSS contains many indicators such as immunity, inflammation, coagulation and nutrition. Our results suggest that HPSS is an independent prognostic factor for overall survival in osteosarcoma patients and is an optimal addition to clinical characteristics and well suited to further identify high-risk patients from clinically low-risk patients. HPSS-based nomograms have good predictive ability. Finally, HPSS also has some hints for immunotherapy response in osteosarcoma patients.
Subject(s)
Bone Neoplasms , Osteosarcoma , Bone Neoplasms/pathology , Bone Neoplasms/therapy , Humans , Immunotherapy , Nomograms , Osteosarcoma/pathology , Osteosarcoma/therapy , Prognosis , Tumor MicroenvironmentABSTRACT
Osteosarcoma is a primary malignant bone tumor with high metastatic potential. To date, achieving long-term survival of osteosarcoma patients remains a difficult task. Metabolic reprogramming has emerged as a new hallmark of cancer. However, studies on the prognostic value of hematological markers related to nutritional and metabolism in cancer patients are limited and contradictory. In this retrospective study, we extensively collected 16 hematological markers related to nutritional and metabolism in 223 osteosarcoma patients. A nutritional metabolism related prognostic scoring system (NMRS) in patients with osteosarcoma was constructed by least absolute contraction and selection operator (LASSO) cox regression analysis. Compared with individual hematological indicators, NMRS has stronger predictive power (training set: 0.811 vs. 0.362-2.638; validation set: 0.767 vs. 0.333-0.595). It is an independent prognostic factor for the survival of patients with osteosarcoma [HR: 1.957 (1.375-2.786) training set; HR: 3.146 (1.574-6.266) validation set]. NMRS-based nomograms have good and stable predictive power. NMRS facilitates further risk stratification of patients with the same clinical characteristics.