Regulation of Macrophage Polarization on Chiral Potential Distribution of CFO/P(VDF-TrFE) Films.

Surface potentials of biomaterials have been shown to regulate cell fate commitment. However, the effects of chirality-patterned potential distribution on macrophage polarization are still only beginning to be explored. In this work, we demonstrated that the chirality-patterned potential distribution of CoFe2O4/poly(vinylidene fluoride-trifluoroethylene) (CFO/P(VDF-TrFE)) films could significantly down-regulate the M1 polarization of bone marrow-derived macrophages (BMDMs). Specifically, the dextral-patterned surface potential distribution simultaneously up-regulated the expression of M2-related markers of BMDMs. The results were attributed to the sensitive difference of integrin subunits (α5ß1 and αvß3) to the dextral- and sinistral-patterned surface potential distribution, respectively. The interaction difference between the integrin subunits and surface potential distribution altered the cell adhesion and cytoskeletal structure and thereby the polarization behavior of BMDMs. This work, therefore, emphasizes the importance of chirality of potential distribution on cell behavior and provides a new strategy to regulate the immune response of biomaterials.

Enhanced M2 Polarization of Oriented Macrophages on the P(VDF-TrFE) Film by Coupling with Electrical Stimulation.

Electrical stimulation (ES) has been considered a promising strategy in regulating intracellular communication, membrane depolarization, ion transport, etc. Meanwhile, cell topography, such as the alignment and elongation in anisotropic orientation, also plays a critical role in triggering mechanotransduction as well as the cellular fate. However, coupling of ES and cell orientation to regulate the polarization of macrophages is yet to be explored. In this work, we intended to explore the polarization of macrophages on a poly(vinylidene fluoride-trifluoroethylene [P(VDF-TrFE)] film with intrinsic microstripe roughness, which was covered on indium tin oxide planar microelectrodes. We found that mouse bone marrow-derived macrophages (BMDMs) cultured on a P(VDF-TrFE) film exhibited an elongated morphology aligned with the microstripe crystal whisker, but their polarization behavior was not affected. However, the elongated cells were susceptible to ES and upregulated their M2 polarization, as verified by the related expression of phenotype markers, cytokines, and genes, while not affecting M1 polarization. This is due to the increased expression of the M2 polarization receptor interleukin-4Rα on the surface of elongated BMDMs, while the M1 polarization receptor toll-like receptor 4 was not affected. Thus, M2 polarization was singularly enhanced after activation of polarization by ES. The combination of surface morphology and ES to promote M2 single polarization in this work provides a new perspective for regulating macrophage polarization in the field of immunotherapy.

Photothermal extracellular matrix based nanocomposite films and their effect on the osteogenic differentiation of BMSCs.

Mild thermal stimulation in vivo could induce osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs). In this study, nano-functionalized photothermal extracellular matrix (ECM) nanocomposite films were obtained through adding graphene during cell culture, so that graphene could directly integrate with the ECM secreted by cells. Owing to the similarity of the ECM to the in vivo microenvironment and the apparent photothermal effect of graphene nanoflakes, heat could be generated and transferred at the material-cell interface in a biomimetic way. It was demonstrated that such nanocomposite films achieved an interface temperature rise with light illumination. This could be easily sensed by BMSCs through the ECM. According to alkaline phosphatase, osteogenic related gene expression, mineral deposition, and upregulated expression of heat shock protein (HSP70) and p-ERK, composite films with proper illumination significantly promoted the differentiation of BMSCs into osteoblasts. This work endeavors to study the thermal regulation of BMSC differentiation and provide a new perspective on biocompatible osteo-implant materials which can be remotely controlled.

Electrochemical deposition of Ppy/Dex/ECM coatings and their regulation on cellular responses through electrical controlled drug release.

Bone tissue engineering requires a material that can simultaneously promote osteogenic differentiation and anti-inflammatory effects at specific times in response to a series of problems after bone implantation. In this study, the porous network-like titanium matrix was constructed and polypyrrole/dexamethasone (Ppy/Dex) composite coatings with three-dimensional nano-network structure were prepared by electrochemical deposition. The biocompatibility of the composite coatings was further improved by the composite of the extracellular matrix (ECM). The Ppy/Dex/ECM composite coatings released Dex by changing the redox state of Ppy under the electrical stimulation of negative pulses, achieving a drug release controlled by electric field. In terms of osteogenic differentiation, the Ppy/Dex/ECM composite coatings exhibited the best osteogenic activity under electrical controlled release, indicating the synergistic effect of Dex and ECM on osteogenic differentiation. In terms of anti-inflammatory properties, ECM exhibited simultaneous inhibition of both pro- and anti-inflammatory process, while Dex demonstrated significant promotion of anti-inflammatory processes. In this work, the effect of electrical controlled drug release on osteogenic differentiation and inflammation in the ECM cell microenvironment was achieved by preparing Ppy/Dex/ECM composite coatings, which is of great significance for bone tissue engineering and regenerative medicine.

The osteogenic response to chirality-patterned surface potential distribution of CFO/P(VDF-TrFE) membranes.

Piezoelectric poly(vinylidene fluoride-trifluoroethylene) has demonstrated an ability to promote osteogenesis, and biomaterials with a chirality-patterned topological surface could enhance cellular osteogenic differentiation. In this work, we created a chirality-patterned surface potential distribution of CoFe2O4/poly(vinylidene fluoride-trifluoroethylene (CFO/P(VDF-TrFE)) membranes to explore their osteogenic response under no change in surface chemical and topology, attempting to further strengthen the ability of the membranes to promote osteogenesis. The chirality-patterned surface potential distribution was established by microdomain contact polarization with the help of sinistral/dextral-patterned ITO interdigital microelectrodes. In the in vitro evaluations, the mesenchymal stem cells showed a positive response in osteogenic differentiation to CFO/P(VDF-TrFE) membranes with both sinistral- and dextral-patterned surface potential distributions, however, the dextral-patterned distribution gave a stronger response than the sinistral-patterned one. And the in vivo evaluation showed a response tend in new bone tissue formation similar to the in vitro evaluations. The stronger response in osteogenic differentiation and osteogenesis for the CFO/P(VDF-TrFE) membrane with the dextral-patterned distributions may be attributed to that the intense interaction of the cells with the electrophysiological microenvironment appears due to a correspondingly higher expression of integrin α5ß1, which significantly up-regulates the Arp2/3 complex expression, a crucial factor for cytoskeleton reorganization, possibly increases cytoskeleton contractility, and strengthens the transduction of the osteogenesis-related signaling cascade. This work proves that the chirality-patterns in surface potential distributions could provide an osteogenic response similar to a chirality-patterned topological surface.

Photo-thermic mineralized collagen coatings and their modulation of macrophages polarization.

Macrophages polarization in bone immune microenvironment is crucial in bone regeneration. In this work, mineralized collagen (MC) coatings with photo-thermal effect were prepared through incorporation of polydopamine (PDA). MC coatings with different thicknesses were deposited on titanium substrate through electrochemical deposition. PDA preformed on the substrate, acting as a photo-thermal agent. The effects of light illumination, i.e., different thermal effects, on the polarization of mouse bone marrow-derived macrophages were explored. It was found that heat can promote the M1 polarization of macrophages and inhibit the M2 polarization. Also, gene expression results revealed that such photo illumination based macrophage modulation is effective and safe. It provides a possible way for the design of functional materials to regulate the bone immune microenvironment.

Effects of electrical stimulation on cytokine-induced macrophage polarization.

Macrophages have two functionalized phenotypes, M1 and M2, and the regulation of M1/M2 polarization of macrophages is critical for tissue repair. Tissue-derived immune factors are considered the major drivers of macrophage polarization. Based on the main cytokine-induced polarization pathways, we tested the effect of electrical stimulation (ES) of macrophages on the regulation of M1/M2 polarization and a possible synergistic effect with the cytokines. Indium tin oxide (ITO) planar microelectrodes were used to produce ES under different voltages, frequencies and waveforms. We evaluated the influence of ES on the cytokine-induced M1/M2 polarization using mouse bone marrow-derived macrophages cultured with both lipopolysaccharide (LPS)/IFN-γ factors and IL-4 factors for M1 and M2, respectively. The results showed that ES promoted the cytokine-induced macrophage polarization. Importantly, we found that stimulation with a square waveform selectively promoted LPS/IFN-γ-induced M1 polarization, while stimulation with a sinusoidal waveform promoted both LPS/IFN-γ-induced M1, and IL-4-induced M2 polarization. Mechanistically, stimulation with a square waveform affected the intracellular ion concentration, whereas stimulation with a sinusoidal waveform promoted both the intracellular ion concentration and membrane receptors. We hereby establish an ES-mediated strategy for immunomodulation via macrophage polarization.

Anisotropic magneto-mechanical stimulation on collagen coatings to accelerate osteogenesis.

Mechanical stimulation has been considered to be critical to cellular response and tissue regeneration. However, harnessing the direction of mechanical stimulation during osteogenesis still remains a challenge. In this study, we designed a series of novel magnetized collagen coatings (MCCs) (randomly or parallel-oriented collagen fibers) to exert the anisotropic mechanical stimulation using oriented magnetic actuation during osteogenesis. Strikingly, we found the osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) were significantly up-regulated when the direction of magnetic actuation was parallel to the randomly-oriented collagen coating surface, in contrast to the down-regulated capacity under the perpendicular magnetic actuation. Moreover, further exerting a parallel mechanical stimulation along the parallel-oriented collagen coating, which cells have been oriented by the oriented collagens, were not only able to up-regulate the osteogenic differentiation of BMSCs but also promote the new bone formation during osteogenesis in vivo. We also demonstrated the anisotropic magneto-mechanical stimulation for the osteogenic differences might be attributed to the stretching or bending tensile status of collagen fibers controlled by the direction of magnetic actuation, driving the α5ß1-dependent integrin signaling cascade. This study therefore got insight of understanding the directional mechanical stimulation on osteogenesis, and also paved a way for sustaining regulation of the biomaterials-host interface.

Tribological and Thermo-Mechanical Properties of TiO2 Nanodot-Decorated Ti3C2/Epoxy Nanocomposites.

The micromorphology of fillers plays an important role in tribological and mechanical properties of polymer matrices. In this work, a TiO2-decorated Ti2C3 (TiO2/Ti3C2) composite particle with unique micro-nano morphology was engineered to improve the tribological and thermo-mechanical properties of epoxy resin. The TiO2/Ti3C2 were synthesized by hydrothermal growth of TiO2 nanodots onto the surface of accordion-like Ti3C2 microparticles, and three different decoration degrees (low, medium, high density) of TiO2/Ti3C2 were prepared by regulating the concentration of TiO2 precursor solution. Tribological test results indicated that the incorporation of TiO2/Ti3C2 can effectively improve the wear rate of epoxy resin. Among them, the medium density TiO2/Ti3C2/epoxy nanocomposites gained a minimum wear rate. This may be ascribed by the moderate TiO2 nanodot protuberances on the Ti3C2 surface induced a strong mechanical interlock effect between medium-density TiO2/Ti3C2 and the epoxy matrix, which can bear a higher normal shear stress during sliding friction. The morphologies of worn surfaces and wear debris revealed that the wear form was gradually transformed from fatigue wear in neat epoxy to abrasive wear in TiO2/Ti3C2/epoxy nanocomposites. Moreover, the results of thermo-mechanical property indicated that incorporation of TiO2/Ti3C2 also effectively improved the storage modulus and glass transition temperature of epoxy resin.

Enhanced osteogenic differentiation of mesenchymal stem cells on P(VDF-TrFE) layer coated microelectrodes.

Electrical stimulation has been proved to be critical to regulate cell behavior. But, cell behavior is also susceptible to multiple parameters of the adverse interferences such as surface current, electrochemical reaction products, and non-uniform compositions, which often occur during direct electric stimulation. To effectively prevent the adverse interferences, a novel piezoelectric poly(vinylidene fluoride-trfluoroethylene)(P(VDF-TrFE)) layer was designed to coat onto the indium tin oxide (ITO) planar microelectrode. We found the electrical stimulation was able to regulate the osteogenic differentiation of mesenchymal stem cells (MSCs) through calcium-mediated PKC signaling pathway. Meanwhile, the surface charge of the designed P(VDF-TrFE) coating layer could be easily controlled by the pre-polarization process, which was demonstrated to trigger integrin-mediated FAK signaling pathway, finally up-regulating the osteogenic differentiation of MSCs. Strikingly, the crosstalk in the downstream of the two signaling cascades further strengthened the ERK pathway activation for osteogenic differentiation of MSCs. This P(VDF-TrFE) layer coated electrical stimulation microelectrodes therefore provide a distinct strategy to manipulate multiple-elements of biomaterial surface to regulate stem cell fate commitment.

Polarization behavior of bone marrow-derived macrophages on charged P(VDF-TrFE) coatings.

The immune response of bone implants is closely related to the interaction between macrophages and biomaterial surfaces. In this work, the polarization behavior of mouse bone marrow-derived macrophages (BMDMs), including their morphology and expression of phenotypic markers, genes and cytokines, on charged surfaces with different potential intensities was systematically explored. We found that the charged surface could effectively promote BMDM polarization, and a higher potential intensity was conducive to the upregulation of the polarization of BMDMs into the M2 phenotype. Based on the analysis of the signaling pathways involved in integrins (αMß2 and α5ß1) and the potassium ion channel (Kv1.3), a possible underlying mechanism revealed that the integrin originated signaling pathways could more dominantly regulate macrophage polarization to the M2 phenotype. The present work therefore demonstrates that the surface charge, as a physicochemical property of material surfaces, could effectively regulate macrophage polarizations, which may provide an immunoregulation view for the surface design of biomaterials.

Enhancing osteogenic differentiation of BMSCs on high magnetoelectric response films.

High performance of biomaterial surfaces provides a sound basis to mediate cellular growth behavior. In this work, we attempted to incorporate both positive and negative magnetostriction particles of CoFe2O4 (CFO) and TbxDy1-xFe2 alloy (TD) into piezoelectric poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)) for forming high magnetoelectric effect films, on which osteogenic differentiation could be dynamically mediated by a magnetic-field-induced surface potential (φME).The negatively poled film with TD/CFO volume ratio of 1:4 (1T4C) showed a highest magnetoelectric effect with φME of -171 mV at 2800 Oe. Compared with CFO/P(VDF-TrFE) and TD/P(VDF-TrFE) films, the φME increased about 213% and 173%, respectively. This could result from that P(VDF-TrFE) dipole domains receive a larger off-axial stress caused by the distribution characteristic of CFO and TD in P(VDF-TrFE), consequently to facilitate P(VDF-TrFE) dipole domain rearrangement. When MSCs were cultured on 1T4C film for 7 or 14 days, the magnetic actuation was setup to begin at the 4th or 8th day after the culture. The 7-day osteogenic differentiation was hardly affected for magnetic actuation at 4th day, moreover, the 14-day differentiation was significantly enhanced for magnetic actuation at 8th day. The enhancement appears just at a relatively late period of the cell growth, probably because the cells need a steady change in cell membrane potential to disassociate pairs of ß-catenin and E-cadherin and activate osteogenic-related signaling pathway. This work could provide an alternative way to promote performance for magnetoelectric materials, and get insight into understanding of interactions of surface potential with cells.

Comprehensive Evaluation of Surface Potential Characteristics on Mesenchymal Stem Cells' Osteogenic Differentiation.

The surface electric potential of biomaterials has been extensively proven to play a critical role in stem cells' fate. However, there are ambiguous reports on the relation of stem cells' osteogenic capacity to surface potential characteristics (potential polarity and intensity). To address this, we adopted a surface with a wide potential range and both positive/negative polarity in a comprehensive view to get insight into surface potential-regulating cellular osteogenic differentiation. Tb xDy1- xFe2 alloy/poly(vinylidene fluoride-trifluoroethylene) magnetoelectric films were prepared, and the film could provide controllable surface potential characteristics with positive or negative polarity and potential (ϕME) intensity variation from 0 to ±120 mV as well as keep the surface chemical composition and microstructure unchanged. Cell culture results showed that osteogenic differentiation of mesenchymal stem cells on both positive and negative potential films was obviously upregulated when the /ϕME/ intensities were set from 0-55 mV. Differently, the highest upregulated osteogenic differentiation on the positive potential films corresponded to the /ϕME/ intensity from 35-55 mV and was better than that on the negative potential films whereas the highest on the negative potential films corresponded to the /ϕME/ intensity from 0-35 mV and was better than that on the positive potential films. This fact could illustrate why previous reports appeared ambiguously; i.e., the comparative result in osteogenic differentiation between the positive and negative potential films strongly depends on the selection of surface potential intensity. On the basis of assaying of the exposed functional sites (RGD and PHSRN) of the adsorbed fibronectin (FN) and the expression of cellular integrin α5 and ß1 subunits, the difference in the behavior between the positive and negative potential films was attributed to the distinct conformation of adsorbed fibronectin (FN) and the opposite changing trend with /ϕME/ for the two films, which triggers the osteogenesis-related FAK/ERK signaling pathway to a different extent. This study could provide new cognition for the in-depth understanding of the regulation mechanism underlying surface potential characteristics in cell behaviors.

Insights into the Osteogenic Differentiation of Mesenchymal Stem Cells on Crystalline and Vitreous Silica.

Cell responses to oxide biomaterials depend on the protein adsorption behavior of the biomaterial surface. Thus, the inherent properties of oxide biomaterial surfaces play a key role in this process. However, commonly used biomaterials, such as calcium phosphate and titanium dioxide, have surfaces with strong mineralization, which may interfere with the ability to clarify the key aspects of the oxide biomaterial regarding protein adsorption and cellular processes. Here, nonmineralized crystalline and vitreous silica were selected as model oxide biomaterials to explore the inherent properties of these materials on the absorption behavior of the functional protein fibronectin (Fn) and on the osteogenic differentiation of mesenchymal stem cells (MSCs). We demonstrated that due to the smaller O1s binding energy, the weaker polarization of oxygen atoms in vitreous silica produced a greater amount of acidic hydroxyls after hydration compared to crystalline silica. These distinct features significantly upregulated the exposure of arginylglycylaspartic acid (RGD) and synergy sites (PHSRN) of Fn and eventually enhanced the osteogenic differentiation of MSCs on vitreous silica surfaces through activation of the integrin-linked kinase (ILK) signaling pathway. Our results highlight the key role of inherent oxide biomaterial crystallinity in protein adsorption and cell behavior.