Does pre-enrichment of anodes with acetate to select for Geobacter spp. enhance performance of microbial fuel cells when switched to more complex substrates?

Many factors affect the performance of microbial fuel cells (MFCs). Considerable attention has been given to the impact of cell configuration and materials on MFC performance. Much less work has been done on the impact of the anode microbiota, particularly in the context of using complex substrates as fuel. One strategy to improve MFC performance on complex substrates such as wastewater, is to pre-enrich the anode with known, efficient electrogens, such as Geobacter spp. The implication of this strategy is that the electrogens are the limiting factor in MFCs fed complex substrates and the organisms feeding the electrogens through hydrolysis and fermentation are not limiting. We conducted a systematic test of this strategy and the assumptions associated with it. Microbial fuel cells were enriched using three different substrates (acetate, synthetic wastewater and real domestic wastewater) and three different inocula (Activated Sludge, Tyne River sediment, effluent from an MFC). Reactors were either enriched on complex substrates from the start or were initially fed acetate to enrich for Geobacter spp. before switching to synthetic or real wastewater. Pre-enrichment on acetate increased the relative abundance of Geobacter spp. in MFCs that were switched to complex substrates compared to MFCs that had been fed the complex substrates from the beginning of the experiment (wastewater-fed MFCs - 21.9 ± 1.7% Geobacter spp.; acetate-enriched MFCs, fed wastewater - 34.9 ± 6.7% Geobacter spp.; Synthetic wastewater fed MFCs - 42.5 ± 3.7% Geobacter spp.; acetate-enriched synthetic wastewater-fed MFCs - 47.3 ± 3.9% Geobacter spp.). However, acetate pre-enrichment did not translate into significant improvements in cell voltage, maximum current density, maximum power density or substrate removal efficiency. Nevertheless, coulombic efficiency (CE) was higher in MFCs pre-enriched on acetate when complex substrates were fed following acetate enrichment (wastewater-fed MFCs - CE = 22.0 ± 6.2%; acetate-enriched MFCs, fed wastewater - CE =58.5 ± 3.5%; Synthetic wastewater fed MFCs - CE = 22.0 ± 3.2%; acetate-enriched synthetic wastewater-fed MFCs - 28.7 ± 4.2%.) The relative abundance of Geobacter ssp. and CE represents the average of the nine replicate reactors inoculated with three different inocula for each substrate. Efforts to improve the performance of anodic microbial communities in MFCs utilizing complex organic substrates should therefore focus on enhancing the activity of organisms driving hydrolysis and fermentation rather the terminal-oxidizing electrogens.

Biogeochemical consequences of a changing Arctic shelf seafloor ecosystem.

Unprecedented and dramatic transformations are occurring in the Arctic in response to climate change, but academic, public, and political discourse has disproportionately focussed on the most visible and direct aspects of change, including sea ice melt, permafrost thaw, the fate of charismatic megafauna, and the expansion of fisheries. Such narratives disregard the importance of less visible and indirect processes and, in particular, miss the substantive contribution of the shelf seafloor in regulating nutrients and sequestering carbon. Here, we summarise the biogeochemical functioning of the Arctic shelf seafloor before considering how climate change and regional adjustments to human activities may alter its biogeochemical and ecological dynamics, including ecosystem function, carbon burial, or nutrient recycling. We highlight the importance of the Arctic benthic system in mitigating climatic and anthropogenic change and, with a focus on the Barents Sea, offer some observations and our perspectives on future management and policy.

Enhanced bio-production from CO2 by microbial electrosynthesis (MES) with continuous operational mode.

Technologies able to convert CO2 to various feedstocks for fuels and chemicals are emerging due to the urge of reducing greenhouse gas emissions and de-fossilizing chemical production. Microbial electrosynthesis (MES) has been shown a promising technique to synthesize organic products particularly acetate using microorganisms and electrons. However, the efficiency of the system is low. In this study, we demonstrated the simple yet efficient strategy in enhancing the efficiency of MES by applying continuous feeding regime. Compared to the fed-batch system, continuous operational mode provided better control of pH and constant medium refreshment, resulting in higher acetate production rate and more diverse bio-products, when the cathodic potential of -1.0 V Ag/AgCl and dissolved CO2 were provided. It was observed that hydraulic retention time (HRT) had a direct effect on the pattern of production, acetate production rate and coulombic efficiency. At HRT of 3 days, pH was around 5.2 and acetate was the dominant product with the highest production rate of 651.8 ± 214.2 ppm per day and a significant coulombic efficiency of 90%. However at the HRT of 7 days, pH was lower at around 4.5, and lower but stable acetate production rate of 280 ppm per day and a maximum coulombic efficiency of 80% was obtained. In addition, more diverse and longer chain products, such as butyrate, isovalerate and caproate, were detected with low concentrations only at the HRT of 7 days. Although microbial community analysis showed the change in the planktonic cells communities after switching the fed-batch mode to continuous feeding regime, Acetobacterium still remained as the responsible bacteria for CO2 reduction to acetate, dominating the cathodic biofilm.

No re-calibration required? Stability of a bioelectrochemical sensor for biodegradable organic matter over 800 days.

Microbial Fuel Cells (MFCs) operated as biosensors could potentially enable truly low-cost, real-time monitoring of organic loading in wastewaters. The current generated by MFCs has been correlated with conventional measures of organic load such as Biochemical Oxygen Demand (BOD), but much remains to be established in terms of the reliability and applicability of such sensors. In this study, batch-mode and multi-stage, flow-mode MFCs were operated for over 800 days and regularly re-calibrated with synthetic wastewater containing glucose and glutamic acid (GGA). BOD5 calibration curves were obtained by normalising the current measured as a percentage of maximum current. There was little drift between recalibrations and non-linear Hill models of the combined dataset had R2 of 88-95%, exhibiting a stable response over time and across devices. Nonetheless, factors which do affect calibration were also assessed. Increasing external resistance (from 43.5 to 5100 Ω) above the internal resistance determined by polarisation curve decreased the calibration upper limit from 240 to 30 mg/l O2 BOD5. Furthermore, more fermentable carbon sources increased the detection range, as tested with samples of real wastewater and synthetic media containing GGA, glucose-only and glutamic acid-only. Biofilm acclimatisation therefore did not account for differences between aerobic oxygen demand determinations and anaerobic MFC responses; these are likely attributable to competitive processes such as fermentation. This further highlights the potential for MFCs as real-time sensors for organic load monitoring and process control in addition to BOD-compliant measurement systems.

Valorization of pulp and paper industry wastewater using sludge enriched with nitrogen-fixing bacteria.

Nitrogen-fixing bacteria (NFB) can reduce nitrogen at ambient pressure and temperature. In this study, we treated effluent from a paper mill in sequencing batch reactors (SBRs) and monitored the abundance and activity of NFB with a view to producing a sludge that could work as a biofertilizer. Four reactors were inoculated with activated sludge enriched with NFB and fed with a high C/N waste (100:0.5) from a paper mill. Though the reactors were able to reduce the organic load of the wastewater by up to 89%, they did not have any nitrogen-fixing activity and showed a decrease in the putative number of NFB (quantified with qPCR). The most abundant species in the reactors treating high C/N paper mill wastewater was identified by Illumina MiSeq 16S rRNA gene amplicon sequencing as Methyloversatilis sp. (relative abundance of 4.4%). Nitrogen fixation was observed when the C/N ratio was increased by adding sucrose. We suspect that real-world biological nitrogen fixation (BNF) will only occur where there is a C/N ratio ≤100:0.07. Consequently, operators should actively avoid adding or allowing nitrogen in the waste streams if they wish to valorize their sludge and reduce running costs. PRACTITIONER POINTS: Efficient biological wastewater treatment of low nitrogen paper mill effluent was achieved without nutrient supplementation. The sludge was still capable of fixing nitrogen although this process was not observed in the wastewater treatment system. This high C/N wastewater treatment technology could be used with effluents from cassava flour, olive oil, wine and dairy industries.

Syntrophic Hydrocarbon Degradation in a Decommissioned Off-Shore Subsea Oil Storage Structure.

Over the last decade, metagenomic studies have revealed the impact of oil production on the microbial ecology of petroleum reservoirs. However, despite their fundamental roles in bioremediation of hydrocarbons, biocorrosion, biofouling and hydrogen sulfide production, oil field and oil production infrastructure microbiomes are poorly explored. Understanding of microbial activities within oil production facilities is therefore crucial for environmental risk mitigation, most notably during decommissioning. The analysis of the planktonic microbial community from the aqueous phase of a subsea oil-storage structure was conducted. This concrete structure was part of the production platform of the Brent oil field (North Sea), which is currently undergoing decommissioning. Quantification and sequencing of microbial 16S rRNA genes, metagenomic analysis and reconstruction of metagenome assembled genomes (MAGs) revealed a unique microbiome, strongly dominated by organisms related to Dethiosulfatibacter and Cloacimonadetes. Consistent with the hydrocarbon content in the aqueous phase of the structure, a strong potential for degradation of low molecular weight aromatic hydrocarbons was apparent in the microbial community. These degradation pathways were associated with taxonomically diverse microorganisms, including the predominant Dethiosulfatibacter and Cloacimonadetes lineages, expanding the list of potential hydrocarbon degraders. Genes associated with direct and indirect interspecies exchanges (multiheme type-C cytochromes, hydrogenases and formate/acetate metabolism) were widespread in the community, suggesting potential syntrophic hydrocarbon degradation processes in the system. Our results illustrate the importance of genomic data for informing decommissioning strategies in marine environments and reveal that hydrocarbon-degrading community composition and metabolisms in man-made marine structures might differ markedly from natural hydrocarbon-rich marine environments.

An underappreciated DIET for anaerobic petroleum hydrocarbon-degrading microbial communities.

Direct interspecies electron transfer (DIET) via electrically conductive minerals can play a role in the anaerobic oxidation of petroleum hydrocarbons in contaminated sites and can be exploited for the development of new, more effective bioremediation approaches.

Parameters influencing the development of highly conductive and efficient biofilm during microbial electrosynthesis: the importance of applied potential and inorganic carbon source.

Cathode-driven applications of bio-electrochemical systems (BESs) have the potential to transform CO2 into value-added chemicals using microorganisms. However, their commercialisation is limited as biocathodes in BESs are characterised by slow start-up and low efficiency. Understanding biosynthesis pathways, electron transfer mechanisms and the effect of operational variables on microbial electrosynthesis (MES) is of fundamental importance to advance these applications of a system that has the capacity to convert CO2 to organics and is potentially sustainable. In this work, we demonstrate that cathodic potential and inorganic carbon source are keys for the development of a dense and conductive biofilm that ensures high efficiency in the overall system. Applying the cathodic potential of -1.0 V vs. Ag/AgCl and providing only gaseous CO2 in our system, a dense biofilm dominated by Acetobacterium (ca. 50% of biofilm) was formed. The superior biofilm density was significantly correlated with a higher production yield of organic chemicals, particularly acetate. Together, a significant decrease in the H2 evolution overpotential (by 200 mV) and abundant nifH genes within the biofilm were observed. This can only be mechanistically explained if intracellular hydrogen production with direct electron uptake from the cathode via nitrogenase within bacterial cells is occurring in addition to the commonly observed extracellular H2 production. Indeed, the enzymatic activity within the biofilm accelerated the electron transfer. This was evidenced by an increase in the coulombic efficiency (ca. 69%) and a 10-fold decrease in the charge transfer resistance. This is the first report of such a significant decrease in the charge resistance via the development of a highly conductive biofilm during MES. The results highlight the fundamental importance of maintaining a highly active autotrophic Acetobacterium population through feeding CO2 in gaseous form, which its dominance in the biocathode leads to a higher efficiency of the system.

An Unexpectedly Broad Thermal and Salinity-Tolerant Estuarine Methanogen Community.

Moderately thermophilic (Tmax, ~55 °C) methanogens are identified after extended enrichments from temperate, tropical and low-temperature environments. However, thermophilic methanogens with higher growth temperatures (Topt ≥ 60 °C) are only reported from high-temperature environments. A microcosm-based approach was used to measure the rate of methane production and methanogen community structure over a range of temperatures and salinities in sediment from a temperate estuary. We report short-term incubations (<48 h) revealing methanogens with optimal activity reaching 70 °C in a temperate estuary sediment (in situ temperature 4-5 °C). While 30 °C enrichments amended with acetate, H2 or methanol selected for corresponding mesophilic trophic groups, at 60 °C, only hydrogenotrophs (genus Methanothermobacter) were observed. Since these methanogens are not known to be active under in situ temperatures, we conclude constant dispersal from high temperature habitats. The likely provenance of the thermophilic methanogens was studied by enrichments covering a range of temperatures and salinities. These enrichments indicated that the estuarine sediment hosted methanogens encompassing the global activity envelope of most cultured species. We suggest that estuaries are fascinating sink and source environments for microbial function study.

Anaerobic microbial communities and their potential for bioenergy production in heavily biodegraded petroleum reservoirs.

Most of the oil in low temperature, non-uplifted reservoirs is biodegraded due to millions of years of microbial activity, including via methanogenesis from crude oil. To evaluate stimulating additional methanogenesis in already heavily biodegraded oil reservoirs, oil sands samples were amended with nutrients and electron acceptors, but oil sands bitumen was the only organic substrate. Methane production was monitored for over 3000 days. Methanogenesis was observed in duplicate microcosms that were unamended, amended with sulfate or that were initially oxic, however methanogenesis was not observed in nitrate-amended controls. The highest rate of methane production was 0.15 µmol CH4 g-1 oil d-1 , orders of magnitude lower than other reports of methanogenesis from lighter crude oils. Methanogenic Archaea and several potential syntrophic bacterial partners were detected following the incubations. GC-MS and FTICR-MS revealed no significant bitumen alteration for any specific compound or compound class, suggesting that the very slow methanogenesis observed was coupled to bitumen biodegradation in an unspecific manner. After 3000 days, methanogenic communities were amended with benzoate resulting in methanogenesis rates that were 110-fold greater. This suggests that oil-to-methane conversion is limited by the recalcitrant nature of oil sands bitumen, not the microbial communities resident in heavy oil reservoirs.

Enrichment of Nitrogen-Fixing Bacteria in a Nitrogen-Deficient Wastewater Treatment System.

Anthropogenic nitrogen fixation is essential to sustain a global population of 7.7 billion. However, there has been a long-standing desire to find cheaper and more environmentally friendly alternatives to the Haber-Bosch process. In this study, we developed a new strategy of nitrogen fixation by enriching free-living N2-fixing bacteria (NFB) in reactors fed with low nitrogen wastewater, analogous to those usually found in certain industrial effluents such as paper mills. Our reactors fixed appreciable quantities of nitrogen with a rate of 11.8 mg N L-1 day-1. This rate is comparable to recent "breakthrough" nitrogen-fixing technologies and far higher than observed in low C/N reactors (fed with organic matter and nitrogen). NFB were quantified using quantitative polymerase chain reaction (qPCR) of the nifH (marker gene used to identify biological nitrogen fixation) and 16S rRNA genes. The nifH gene was enriched by a factor of 10 in the nitrogen-fixing reactors (compared to controls) attaining 13% of the bacterial population (1:4.2 copies of nifH to 16S rRNA). The Illumina MiSeq 16S rRNA gene amplicon sequencing of reactors showed that the microbial community was dominated (19%) by Clostridium pasteurianum. We envisage that nitrogen-enriched biomass could potentially be used as a biofertilizer and that the treated wastewater could be released to the environment with very little post-treatment.

Comparison of sulfide-oxidizing Sulfurimonas strains reveals a new mode of thiosulfate formation in subsurface environments.

Sulfur-oxidizing Sulfurimonas spp. are widespread in sediments, hydrothermal vent fields, aquifers and subsurface environments such as oil reservoirs where they play an important role in the sulfur cycle. We determined the genome sequence of the oil field isolate Sulfurimonas sp. strain CVO and compared its gene expression during nitrate-dependent sulfide oxidation to the coastal sediment isolate Sulfurimonas denitrificans. Formation of elemental sulfur (S0 ) and high expression of sulfide quinone oxidoreductase (SQR) genes indicates that sulfide oxidation in both strains is mediated by SQR. Subsequent oxidation of S0 was achieved by the sulfur oxidation enzyme complex (SOX). In the coastal S. denitrificans, the genes are arranged and expressed as two clusters: soxXY1 Z1 AB and soxCDY2 Z2 H, and sulfate was the sole metabolic end product. By contrast, the oil field strain CVO has only the soxCDY2 Z2 H cluster and not soxXY1 Z1 AB. Despite the absence of the soxXY1 Z1 AB cluster, strain CVO oxidized S0 to thiosulfate and sulfate, demonstrating that soxCDY2 Z2 H genes alone are sufficient for S0 oxidation in Sulfurimonas spp. and that thiosulfate is an additional metabolic end product. Screening of publicly available metagenomes revealed that Sulfurimonas spp. with only the soxCDY2 Z2 H cluster are widespread suggesting this mechanism of thiosulfate formation is environmentally significant.

Sediment cooling triggers germination and sulfate reduction by heat-resistant thermophilic spore-forming bacteria.

Thermophilic endospores are widespread in cold marine sediments where the temperature is too low to support growth and activity of thermophiles in situ. These endospores are likely expelled from warm subsurface environments and subsequently dispersed by ocean currents. The endospore upper temperature limit for survival is 140°C, which can be tolerated in repeated short exposures, potentially enabling transit through hot crustal fluids. Longer-term thermal tolerance of endospores, and how long they could persist in an environment hotter than their maximum growth temperature, is less understood. To test whether thermophilic endospores can survive prolonged exposure to high temperatures, sediments were incubated at 80-90°C for 6, 12 or 463 days. Sediments were then cooled by 10-40°C, mimicking the cooling in subsurface oil reservoirs subjected to seawater injection. Cooling the sediments induced sulfate reduction, coinciding with an enrichment of endospore-forming Clostridia. Different Desulfofundulus, Desulfohalotomaculum, Desulfallas, Desulfotomaculum and Desulfofarcimen demonstrated different thermal tolerances, with some Desulfofundulus strains surviving for >1 year at 80°C. In an oil reservoir context, heat-resistant endospore-forming sulfate-reducing bacteria have a survival advantage if they are introduced to, or are resident in, an oil reservoir normally too hot for germination and growth, explaining observations of reservoir souring following cold seawater injection.

Beyond N and P: The impact of Ni on crude oil biodegradation.

N and P are the key limiting nutrients considered most important for the stimulation of crude oil degradation but other trace nutrients may also be important. Experimental soil microcosms were setup to investigate crude oil degradation in the context of Ni amendments. Amended Nickel as NiO, NiCl2, or, a porphyrin complex either inhibited, had no effect, or, enhanced aerobic hydrocarbon degradation in an oil-contaminated soil. Biodegradation was significantly (95% confidence) enhanced (70%) with low levels of Ni-Porph (12 mg/kg) relative to an oil-only control; whereas, NiO (200 and 350 mg/kg) significantly inhibited (36 and 87%) biodegradation consistent with oxide particle induced reactive oxygen stress. Microbial community compositions were also significantly affected by Ni. In 16S rRNA sequence libraries, the enriched hydrocarbon degrading genus, Rhodococcus, was partially replaced by a Nocardia sp. in the presence of low levels of NiO (12 and 50 mg/kg). In contrast, the highest relative and absolute Rhodococcus abundances were coincident with the maximal rates of oil degradation observed in the Ni-Porph-amended soils. Growth dependent constitutive requirements for Ni-dependent urease or perhaps Ni-dependent superoxide dismutase enzymes (found in Rhodococcus genomes) provided a mechanistic explanation for stimulation. These results suggest biostimulation technologies, in addition to N and P, should also consider trace nutrients such as Ni tacitly considered adequately supplied and available in a typical soil.

Contrasting Pathways for Anaerobic Methane Oxidation in Gulf of Mexico Cold Seep Sediments.

Gulf of Mexico sediments harbor numerous hydrocarbon seeps associated with high sedimentation rates and thermal maturation of organic matter. These ecosystems host abundant and diverse microbial communities that directly or indirectly metabolize components of the emitted fluid. To investigate microbial function and activities in these ecosystems, metabolic potential (metagenomic) and gene expression (metatranscriptomic) analyses of two cold seep areas of the Gulf of Mexico were carried out. Seeps emitting biogenic methane harbored microbial communities dominated by archaeal anaerobic methane oxidizers of phylogenetic group 1 (ANME-1), whereas seeps producing fluids containing a complex mixture of thermogenic hydrocarbons were dominated by ANME-2 lineages. Metatranscriptome measurements in both communities indicated high levels of expression of genes for methane metabolism despite their distinct microbial communities and hydrocarbon composition. In contrast, the transcription level of sulfur cycle genes was quite different. In the thermogenic seep community, high levels of transcripts indicative of syntrophic anaerobic oxidation of methane (AOM) coupled to sulfate reduction were detected. This syntrophic partnership between the dominant ANME-2 and sulfate reducers potentially involves direct electron transfer through multiheme cytochromes. In the biogenic methane seep, genes from an ANME-1 lineage that are potentially involved in polysulfide reduction were highly expressed, suggesting a novel bacterium-independent anaerobic methane oxidation pathway coupled to polysulfide reduction. The observed divergence in AOM activities provides a new model for bacterium-independent AOM and emphasizes the variation that exists in AOM pathways between different ANME lineages. IMPORTANCE Cold seep sediments are complex and widespread marine ecosystems emitting large amounts of methane, a potent greenhouse gas, and other hydrocarbons. Within these sediments, microbial communities play crucial roles in production and degradation of hydrocarbons, modulating oil and gas emissions to seawater. Despite this ecological importance, our understanding of microbial functions and methane oxidation pathways in cold seep ecosystems is poor. Based on gene expression profiling of environmental seep sediment samples, the present work showed that (i) the composition of the emitted fluids shapes the microbial community in general and the anaerobic methanotroph community specifically and (ii) AOM by ANME-2 in this seep may be coupled to sulfate reduction by Deltaproteobacteria by electron transfer through multiheme cytochromes, whereas AOM by ANME-1 lineages in this seep may involve a different, bacterium-independent pathway, coupling methane oxidation to elemental sulfur/polysulfide reduction.

Bioelectrochemical treatment and recovery of copper from distillery waste effluents using power and voltage control strategies.

Copper recovery from distillery effluent was studied in a scalable bioelectro-chemical system with approx. 6.8 L total volume. Two control strategies based on the control of power with maximum power point tracking (MPPT) and the application of 0.5 V using an external power supply were used to investigate the resultant modified electroplating characteristics. The reactor system was constructed from two electrically separated, but hydraulically connected cells, to which the MPPT and 0.5 V control strategies were applied. Three experiments were carried out using a relatively high copper concentration i.e. 1000 mg/L followed by a lower concentration i.e. 50 mg/L, with operational run times defined to meet the treatment requirements for distillery effluents considered. Real distillery waste was introduced into the cathode to reduce ionic copper concentrations. This waste was then recirculated to the anode as a feed stock after the copper depletion step, in order to test the bioenergy self-sustainability of the system. Approx. 60-95% copper was recovered in the form of deposits depending on starting concentration. However, the recovery was low when the anode was supplied with copper depleted distillery waste. Through process control (MPPT or 0.5 V applied voltage) the amount and form of the copper recovered could be manipulated.

Metabolites of an Oil Field Sulfide-Oxidizing, Nitrate-Reducing Sulfurimonas sp. Cause Severe Corrosion.

Oil reservoir souring and associated material integrity challenges are of great concern to the petroleum industry. The bioengineering strategy of nitrate injection has proven successful for controlling souring in some cases, but recent reports indicate increased corrosion in nitrate-treated produced water reinjection facilities. Sulfide-oxidizing, nitrate-reducing bacteria (soNRB) have been suggested to be the cause of such corrosion. Using the model soNRB Sulfurimonas sp. strain CVO obtained from an oil field, we conducted a detailed analysis of soNRB-induced corrosion at initial nitrate-to-sulfide (N/S) ratios relevant to oil field operations. The activity of strain CVO caused severe corrosion rates of up to 0.27 millimeters per year (mm y-1) and up to 60-µm-deep pitting within only 9 days. The highest corrosion during the growth of strain CVO was associated with the production of zero-valent sulfur during sulfide oxidation and the accumulation of nitrite, when initial N/S ratios were high. Abiotic corrosion tests with individual metabolites confirmed biogenic zero-valent sulfur and nitrite as the main causes of corrosion under the experimental conditions. Mackinawite (FeS) deposited on carbon steel surfaces accelerated abiotic reduction of both sulfur and nitrite, exacerbating corrosion. Based on these results, a conceptual model for nitrate-mediated corrosion by soNRB is proposed.IMPORTANCE Ambiguous reports of corrosion problems associated with the injection of nitrate for souring control necessitate a deeper understanding of this frequently applied bioengineering strategy. Sulfide-oxidizing, nitrate-reducing bacteria have been proposed as key culprits, despite the underlying microbial corrosion mechanisms remaining insufficiently understood. This study provides a comprehensive characterization of how individual metabolic intermediates of the microbial nitrogen and sulfur cycles can impact the integrity of carbon steel infrastructure. The results help explain the dramatic increases seen at times in corrosion rates observed during nitrate injection in field and laboratory trials and point to strategies for reducing adverse integrity-related side effects of nitrate-based souring mitigation.

Beyond the tip of the iceberg; a new view of the diversity of sulfite- and sulfate-reducing microorganisms.

Sulfite-reducing and sulfate-reducing microorganisms (SRM) play important roles in anoxic environments, linking the sulfur and carbon cycles. With climate warming, the distribution of anoxic habitats conductive to dissimilatory SRM is expanding. Consequently, we hypothesize that novel SRM are likely to emerge from the rare biosphere triggered by environmental changes. Using the dsrB gene as a  molecular marker of sulfite-reducers and sulfate-reducers, we analyzed the diversity, community composition, and abundance of SRM in 200 samples representing 14 different ecosystems, including marine and freshwater environments, oil reservoirs, and engineered infrastructure. Up to 167,397 species-level OTUs affiliated with 47 different families were identified. Up to 96% of these can be considered as "rare biosphere SRM". One  third of the dsrB genes identified belonged to uncharacterized lineages. The dsrB sequences exhibited a  strong pattern of selection in different ecosystems. These results expand our knowledge of the biodiversity and distribution of SRM, with implications for carbon and sulfur cycling in anoxic ecosystems.

Damage to offshore production facilities by corrosive microbial biofilms.

In offshore production facilities, large amounts of deaerated seawater are continuously injected to maintain pressure in oil reservoirs and equivalent volumes of fluids, composed of an oil/gas, and water mixture are produced. This process, brewing billions of liters of biphasic fluids particularly rich in microorganisms, goes through complex steel pipeline networks that are particularly prone to biofilm formation. Consequently, offshore facilities are frequently victims of severe microbiologically influenced corrosion. Understanding of microbiologically influenced corrosion is constantly growing. In the laboratory, the inventory of potentially corrosive microorganisms is increasing and microbial biochemical and bioelectrical processes are now recognized to be involved in corrosion. However, understanding of corrosive multispecies biofilms and the complex metabolic processes associated with corrosion remains a considerable challenge as simple laboratory biofilms comprising pure or defined mixed cultures poorly represent the complexity of in situ biofilms. Complementary, antagonistic, and parallel microbial pathways occur within the complex microbial and inorganic matrix of the biofilms which can lead to high corrosion rates. This mini-review explores models of microbiologically influenced corrosion and places them in the context of the multispecies biofilms observed in situ. Consequences of mitigation strategies on biofilm corrosiveness and dispersal are also discussed.