Selective and Controllable Cracking of Polyethylene Waste by Beta Zeolites with Different Mesoporosity and Crystallinity.

Waste plastics bring about increasingly serious environmental challenges, which can be partly addressed by their interconversion into valuable compounds. It is hypothesized that the porosity and acidity of a zeolite-based catalyst will affect the selectivity and effectiveness, enabling a controllable and selective conversion of polyethylene (PE) into gas-diesel or lubricating base oil. A series of embryonic, partial- and well-crystalline zeolites beta with adjustable porosity and acidity are prepared from mesoporous SBA-15. The catalysts and catalytic systems are studied with nuclear magnetic resonance (NMR), X-ray diffraction (XRD), and adsorption kinetics and catalytic reactions. The adjustable porosity and acidity of zeolite-beta-based catalysts achieve a controllable selectivity toward gas-diesel or lubricating base oil for PE cracking. With a catalyst with mesopores and appropriate acid sites, a fast escape and reduced production of cracking of intermediates are observed, leading to a significant fraction (88.7%) of lubricating base oil. With more micropores, a high acid density, and strong acid strength, PE is multiply cracked into low carbon number hydrocarbons. The strong acid center of the zeolite is confirmed to facilitate significantly the activation of hydrogen (H2), and, an in situ ammonia poisoning strategy can significantly inhibit hydrogen transfer and effectively regulate the product distribution.

A microporous polymer based on nonconjugated hindered biphenyls that emits blue light.

Microporous organic polymers that have three-dimensional connectivity stemming from monomers with tetrahedral or tetrahedron-like geometry can have high surface areas and strong fluorescence. There are however few examples of such polymers based on hindered biaryls, and their fluorescence has not been studied. Hypothesizing that the contortion in a hindered biphenyl moiety would modulate the optical properties of a polymer built from it, we synthesized a meta-enchained polyphenylene from a 2,2',6,6'-tetramethylbiphenyl-based monomer, in which the two phenyl rings are nearly mutually perpendicular. The polymer was microporous with SBET = 495 m2 g-1. The polymer absorbed near-UV light and emitted blue fluorescence despite the meta-enchainment that would have been expected to break the conjugation. A related copolymer, synthesized from 2,2',6,6'-tetramethylbiphenyl-based and unsubstituted biphenyl-based monomers, was microporous but not fluorescent.

Sustainable Composite Materials Based on Carnauba Wax and Montmorillonite Nanoclay for Energy Storage.

Sustainable composite materials, including carnauba wax, can store energy in the form of latent heat, and containing the wax may allow form-stable melting and crystallization cycles to be performed. Here, it is shown that carnauba wax in the molten state and the abundant nanoclay montmorillonite form stable composites with mass ratios of 50-70% (w/w). Transmission electron microscopy analysis reveals the inhomogeneous distribution of the nanoclay in the wax matrix. Analyses with infrared and multinuclear solid-state nuclear magnetic resonance (NMR) spectroscopy prove the chemical inertness of the composite materials during preparation. No new phases are formed according to studies with powder X-ray diffraction. The addition of the nanoclay increases the thermal conductivity and prevents the leakage of the phase change material, as well as reducing the time intervals of the cycle of accumulation and the return of heat. The latent heat increases in the row 69.5 ± 3.7 J/g, 95.0 ± 2.5 J/g, and 107.9 ± 1.7 J/g for the composite materials containing resp. 50%, 60% and 70% carnauba wax. Analysis of temperature-dependent 13C cross-polarization solid-state NMR spectra reveal the enhanced amorphization and altered molecular dynamics of the carnauba wax constituents in the composite materials. The amorphization also defines changes in the thermal transport mechanism in the composites compared to pure wax at elevated temperatures.

Chirality Transfer of Glycopeptide across Scales Defined by the Continuity of Hydrogen Bonds.

In nature, chirality transfer refines biomolecules across all size scales, bestowing them with a myriad of sophisticated functions. Despite recent advances in replicating chirality transfer with biotic or abiotic building blocks, a molecular understanding of the underlying mechanism of chirality transfer remains a daunting challenge. In this paper, the coassembly of two types of glycopeptide molecules differing in capability of forming intermolecular hydrogen bonds enabled the involvement of discontinuous hydrogen bond, which allowed for a nanoscale chirality transfer from glycopeptide molecules to chiral micelles, yet inhibited the micrometer scale chirality transfer toward helix formation, leading to an achiral transfer from chiral micelles to planar monolayer. Upon stacking the monolayer into a bilayer, the nonsuperimposable front and back faces of the chiral micelles involved in the monolayer ribbons lead to the opposite rotation of two layers toward increasing the continuity of H-bonds. The resultant continuity triggered the symmetry breaking of stacked bilayers and thus reactivated the micrometer-scale chirality transfer toward the final helix. This work delineates a promising step toward a better understanding and replicating the naturally occurring chirality transfer events and will be instructive to future chiral material design.

Enhanced Generation of Reactive Oxygen Species via Piezoelectrics based on p-n Heterojunctions with Built-In Electric Field.

Tuning the charge transfer processes through a built-in electric field is an effective way to accelerate the dynamics of electro- and photocatalytic reactions. However, the coupling of the built-in electric field of p-n heterojunctions and the microstrain-induced polarization on the impact of piezocatalysis has not been fully explored. Herein, we demonstrate the role of the built-in electric field of p-type BiOI/n-type BiVO4 heterojunctions in enhancing their piezocatalytic behaviors. The highly crystalline p-n heterojunction is synthesized by using a coprecipitation method under ambient aqueous conditions. Under ultrasonic irradiation in water exposed to air, the p-n heterojunctions exhibit significantly higher production rates of reactive species (·OH, ·O2-, and 1O2) as compared to isolated BiVO4 and BiOI. Also, the piezocatalytic rate of H2O2 production with the BiOI/BiVO4 heterojunction reaches 480 µmol g-1 h-1, which is 1.6- and 12-fold higher than those of BiVO4 and BiOI, respectively. Furthermore, the p-n heterojunction maintains a highly stable H2O2 production rate under ultrasonic irradiation for up to 5 h. The results from the experiments and equation-driven simulations of the strain and piezoelectric potential distributions indicate that the piezocatalytic reactivity of the p-n heterojunction resulted from the polarization intensity induced by periodic ultrasound, which is enhanced by the built-in electric field of the p-n heterojunctions. This study provides new insights into the design of piezocatalysts and opens up new prospects for applications in medicine, environmental remediation, and sonochemical sensors.

Activity and Stability of Nanoconfined Alpha-Amylase in Mesoporous Silica.

Mesoporous silica particles (MSPs) have been studied for their potential therapeutic uses in controlling obesity and diabetes. Previous studies have shown that the level of digestion of starch by α-amylase is considerably reduced in the presence of MSPs, and it has been shown to be caused by the adsorption of α-amylase by MSPs. In this study, we tested a hypothesis of enzymatic deactivation and measured the activity of α-amylase together with MSPs (SBA-15) using comparably small CNP-G3 (2-chloro-4-nitrophenyl alpha-d-maltotrioside) as a substrate. We showed that pore-incorporated α-amylase was active and displayed higher activity and stability compared to amylase in solution (the control). We attribute this to physical effects: the coadsorption of CNP-G3 on the MSPs and the relatively snug fit of the amylase in the pores. Biosorption in this article refers to the process of removal or adsorption of α-amylase from its solution phase into the same solution dispersed in, or adsorbed on, the MSPs. Large quantities of α-amylase were biosorbed (about 21% w/w) on the MSPs, and high values of the maximum reaction rate (Vmax) and the Michaelis-Menten constant (KM) were observed for the enzyme kinetics. These findings show that the reduced enzymatic activity for α-amylase on MSP observed here and in earlier studies was related to the large probe (starch) being too large to adsorb in the pores, and potato starch has indeed a hydrodynamic diameter much larger than the pore sizes of MSPs. Further insights into the interactions and environments of the α-amylase inside the MSPs were provided by 1H fast magic-angle spinning (MAS) nuclear magnetic resonance (NMR) and 13C/15N dynamic nuclear polarization MAS NMR experiments. It could be concluded that the overall fold and solvation of the α-amylase inside the MSPs were nearly identical to those in solution.

Desulfurization of diesel via joint adsorption and extraction using a porous liquid derived from ZIF-8 and a phosphonium-type ionic liquid.

A type-III porous liquid based on zeolitic imidazolate framework-8 (ZIF-8) and an ionic liquid trihexyltetradecylphosphonium bis(trifluoromethylsulfonyl)imide ([THTDP][BTI]) was synthesized and used for the desulfurization of model diesel. The desulfurization effect by ZIF-8/[THTDP][BTI] combined both the adsorptive desulfurization by ZIF-8 and the extraction desulfurization by [THTDP][BTI]. The removal of the three chosen aromatic organic sulfides by the ZIF-8/[THTDP][BTI] porous liquid followed the order of dibenzothiophene (73.1%) > benzothiophene (70.0%) > thiophene (61.5%). It was further found that deep desulfurization could be realized by ZIF-8/[THTDP][BTI] through triple desulfurization cycles and ZIF-8/[THTDP][BTI] can be regenerated readily. The desulfurization mechanism was explored further in detail by conformation search and density functional theory calculations. Calculations supported that the large molecular volume of [THTDP][BTI] excluded itself from the cavities of ZIF-8, making the pores of ZIF-8 in the porous liquid unoccupied and accessible by other guest species, here the studied organic sulfides. These calculations indicate that the van der Waals interactions were the main interactions between ZIF-8/[THTDP][BTI] and specifically benzothiophene. This work supports that the porous liquid ZIF-8/[THTDP][BTI] could potentially be used for desulfurization of diesel in industry.

Precapture of CO2 and Hydrogenation into Methanol on Heterogenized Ruthenium and Amine-Rich Catalytic Systems.

A heterogenized alternative to the homogeneous precapture of CO2 with amines and subsequent hydrogenation to MeOH was developed using aminated silica and a Ru-MACHOTM catalyst. Commercial mesoporous silica was modified with three different amino-silane monomers and used as support for the Ru catalyst. These composites were studied by TEM and solid-state NMR spectroscopy before and after the catalytic reaction. These catalytic reactions were conducted at 155 °C at a H2 and CO2 pressures of 75 and 2 bar, respectively, with the heterogeneous system (gas-solid) being probed with gas-phase infrared spectroscopy used to quantify the resulting products. High turnover number (TON) values were observed for the samples aminated with secondary amines.

Mesoporous Silica Particles Retain Their Structure and Function while Passing through the Gastrointestinal Tracts of Mice and Humans.

Mesoporous silica particles (MSPs) can be used as food additives, clinically for therapeutic applications, or as oral delivery vehicles. It has also been discussed to be used for a number of novel applications including treatment for diabetes and obesity. However, a major question for their possible usage has been if these particles persist structurally and retain their effect when passing through the gastrointestinal tract (GIT). A substantial breaking down of the particles could reduce function and be clinically problematic for safety issues. Hence, we investigated the biostability of MSPs of the SBA-15 kind prepared at large scales (100 and 1000 L). The MSPs were orally administered in a murine model and clinically in humans. A joint extraction and calcination method was developed to recover the MSPs from fecal mass, and the MSPs were characterized physically, structurally, morphologically, and functionally before and after GIT passage. Analyses with N2 adsorption, X-ray diffraction, electron microscopy, and as a proxy for general function, adsorption of the enzyme α-amylase, were conducted. The adsorption capacity of α-amylase on extracted MSPs was not reduced as compared to the pristine and control MSPs, and adsorption of up to 17% (w/w) was measured. It was demonstrated that the particles did not break down to any substantial degree and retained their function after passing through the GITs of the murine model and in humans. The fact the particles were not absorbed into the body was ascribed to that they were micron-sized and ingested as agglomerates and too big to pass the intestinal barrier. The results strongly suggest that orally ingested MSPs can be used for a number of clinical applications.

Colloidal Stabilization of Submicron-Sized Zeolite NaA in Ethanol-Water Mixtures for Nanostructuring into Thin Films and Nanofibers.

Despite the growing use of organic or mixed solvents in zeolite processing, most studies focus only on aqueous suspension systems. We investigated the colloidal characteristics of submicron-sized zeolite NaA in mixed ethanol-water solvents. The effects of the mixing ratio of solvents and various additives on the dispersion of the zeolite powders were studied. The zeolite NaA particles were destabilized in solvent mixtures at a high ethanol-to-water ratio, a reduction in the zeta potential was observed, and the destabilization was rationalized by the Derjaguin, Landau, Verwey, Overbeek (DLVO) theory. An improved stabilization of the zeolite NaA suspensions was achieved in ethanol-rich solvent mixtures using nonionic low molecular weight organic additives, but not with their ionic counterparts such as anionic, cationic surfactants or inorganic acids or bases. Polyethylene glycol (PEG)-400 was found to be a good dispersant for the submicron-sized zeolite NaA particles in the ethanol-water mixtures, which was attributed to its interaction with the zeolite surface, leading to an increased zeta potential. The PEG-stabilized zeolite suspensions led to low suspension viscosities as well as uniform and consistent spin-coated films.

Electron correlation and vibrational effects in predictions of paramagnetic NMR shifts.

Electronic structure calculations are fundamentally important for the interpretation of nuclear magnetic resonance (NMR) spectra from paramagnetic systems that include organometallic and inorganic compounds, catalysts, or metal-binding sites in proteins. Prediction of induced paramagnetic NMR shifts requires knowledge of electron paramagnetic resonance (EPR) parameters: the electronic g tensor, zero-field splitting D tensor, and hyperfine A tensor. The isotropic part of A, called the hyperfine coupling constant (HFCC), is one of the most troublesome properties for quantum chemistry calculations. Yet, even relatively small errors in calculations of HFCC tend to propagate into large errors in the predicted NMR shifts. The poor quality of A tensors that are currently calculated using density functional theory (DFT) constitutes a bottleneck in improving the reliability of interpretation of the NMR spectra from paramagnetic systems. In this work, electron correlation effects in calculations of HFCCs with a hierarchy of ab initio methods were assessed, and the applicability of different levels of DFT approximations and the coupled cluster singles and doubles (CCSD) method was tested. These assessments were performed for the set of selected test systems comprising an organic radical, and complexes with transition metal and rare-earth ions, for which experimental data are available. Severe deficiencies of DFT were revealed but the CCSD method was able to deliver good agreement with experimental data for all systems considered, however, at substantial computational costs. We proposed a more computationally tractable alternative, where the A was computed with the coupled cluster theory exploiting locality of electron correlation. This alternative is based on the domain-based local pair natural orbital coupled cluster singles and doubles (DLPNO-CCSD) method. In this way the robustness and reliability of the coupled cluster theory were incorporated into the modern formalism for the prediction of induced paramagnetic NMR shifts, and became applicable to systems of chemical interest. This approach was verified for the bis(cyclopentadienyl)vanadium(II) complex (Cp2V; vanadocene), and the metal-binding site of the Zn2+ → Co2+ substituted superoxide dismutase (SOD) metalloprotein. Excellent agreement with experimental NMR shifts was achieved, which represented a substantial improvement over previous theoretical attempts. The effects of vibrational corrections to orbital shielding and hyperfine tensor were evaluated and discussed within the second-order vibrational perturbation theory (VPT2) framework.

Efficient Production of Solar Hydrogen Peroxide Using Piezoelectric Polarization and Photoinduced Charge Transfer of Nanopiezoelectrics Sensitized by Carbon Quantum Dots.

Piezoelectric semiconductors have emerged as redox catalysts, and challenges include effective conversion of mechanical energy to piezoelectric polarization and achieving high catalytic activity. The catalytic activity can be enhanced by simultaneous irradiation of ultrasound and light, but the existing piezoelectric semiconductors have trouble absorbing visible light. A piezoelectric catalyst is designed and tested for the generation of hydrogen peroxide (H2 O2 ). It is based on Nb-doped tetragonal BaTiO3 (BaTiO3 :Nb) and is sensitized by carbon quantum dots (CDs). The photosensitizer injects electrons into the conduction band of the semiconductor, while the piezoelectric polarization directed electrons to the semiconductor surface, allowing for a high-rate generation of H2 O2 . The piezoelectric polarization field restricts the recombination of photoinduced electron-hole pairs. A production rate of 1360 µmol gcatalyst -1  h-1  of H2 O2  is achieved under visible light and ultrasound co-irradiation. Individual piezo- and photocatalysis yielded lower production rates. Furthermore, the CDs enhance the piezocatalytic activity of the BaTiO3 :Nb. It is noted that moderating the piezoelectricity of BaTiO3 :Nb via microstructure modulation influences the piezophotocatalytic activity. This work shows a new methodology for synthesizing H2 O2  by using visible light and mechanical energy.

A New Family of Renewable Thermosets: Kraft Lignin Poly-adipates.

Thermosetting polymeric materials have advantageous properties and are therefore used in numerous applications. In this study, it was hypothesized and ultimately shown that thermosets could be derived from comparably sustainable sub-components. A two-step procedure to produce a thermoset comprising of Kraft lignin (KL) and the cross-linker adipic acid (AdA) was developed. The cross-linking was activated by means of an acetylating agent comprising isopropenyl acetate (IPA) to form a cross-linking mixture (CLM). The cross-linking was confirmed by FTIR and solid-state NMR spectroscopy, and the esterification reactions were further studied using model compounds. When the KL lignin was mixed with the CLM, partial esterification occurred to yield a homogeneous viscous liquid that could easily be poured into a mold, as the first step in the procedure. Without any additions, the mold was heated and the material transformed into a thermoset by reaction of the two carboxylic acid-derivatives of AdA and KL in the second step.

Local energy decomposition analysis and molecular properties of encapsulated methane in fullerene (CH4@C60).

Methane has been successfully encapsulated within cages of C60 fullerene, which is an appropriate model system to study confinement effects. Its chemistry and physics are also relevant for theoretical model descriptions. Here we provide insights into intermolecular interactions and predicted spectroscopic responses of the CH4@C60 complex and compared them with results from other methods and with data from the literature. Local energy decomposition analysis (LED) within the domain-based local pair natural orbital coupled cluster singles, doubles, and perturbative triples (DLPNO-CCSD(T)) framework was used, and an efficient protocol for studies of endohedral complexes of fullerenes is proposed. This approach allowed us to assess energies in relation to electronic and geometric preparation, electrostatics, exchange, and London dispersion for the CH4@C60 endohedral complex. The calculated stabilization energy of CH4 inside the C60 fullerene was -13.5 kcal mol-1 and its magnitude was significantly larger than the latent heat of evaporation of CH4. Evaluation of vibrational frequencies and polarizabilities of the CH4@C60 complex revealed that the infrared (IR) and Raman bands of the endohedral CH4 were essentially "silent" due to the dielectric screening effect of C60, which acted as a molecular Faraday cage. Absorption spectra in the UV-vis domain and ionization potentials of C60 and CH4@C60 were predicted. They were almost identical. The calculated 1H/13C NMR shifts and spin-spin coupling constants were in very good agreement with experimental data. In addition, reference DLPNO-CCSD(T) interaction energies for complexes with noble gases (Ng@C60; Ng = He, Ne, Ar, Kr) were calculated. The values were compared with those derived from supramolecular MP2/SCS-MP2 calculations and estimates with London-type formulas by Pyykkö and coworkers [Phys. Chem. Chem. Phys., 2010, 12, 6187-6203], and with values derived from DFT-based symmetry-adapted perturbation theory (DFT-SAPT) by Hesselmann & Korona [Phys. Chem. Chem. Phys., 2011, 13, 732-743]. Selected points at the potential energy surface of the endohedral He2@C60 trimer were considered. In contrast to previous theoretical attempts with the DFT/MP2/SCS-MP2/DFT-SAPT methods, our calculations at the DLPNO-CCSD(T) level of theory predicted the He2@C60 trimer to be thermodynamically stable, which is in agreement with experimental observations.

Enhanced Sunlight-Driven Reactive Species Generation via Polarization Field in Nanopiezoelectric Heterostructures.

Although it is established that the force-induced electric polarization field of piezoelectric semiconductors can be used to tune the transfer rate of photoexcited charge carriers, there is still a lack of successful strategies to effectively improve the photocatalytic reactivity and solar-to-chemical conversion efficiency (SCC) of piezoelectric materials. Here, we are the first to prepare and study a kind of catalyst based on nanopiezoelectric heterostructures of LiNbO3-type ZnTiO3·TiO2 and tetragonal BaTiO3 with Pt or FeOx nanoparticle modification (i.e., ZBTO-Pt or ZBTO-FeOx) for reactive species generation. With respect to the production of •OH and •O2- radicals, higher amounts were observed in piezophotocatalysis relative to those for individual piezo- and photocatalysis. Benefiting from the charge transfer resistance decreases by the deposition of Pt and FeOx, the amounts of •OH radicals formed on ZBTO-Pt and ZBTO-FeOx were approximately 48 and 21% higher than that on isolated ZBTO during piezophotocatalysis, and for the amounts of •O2- radicals the enhancements were approximately 11 and 6%, respectively. Furthermore, the concentrations of H2O2 formed on ZBTO-Pt and ZBTO-FeOx under piezophotocatalysis reached approximately 315 and 206 µM after 100 min of reaction (and was still increasing) corresponding to 0.10 and 0.06% SCCs, respectively, which were also much higher than the concentrations and SCCs observed for piezo- and photocatalysis. The enhancements of piezophotocatalytic activities with these piezoelectric materials were related to the mechanical strain exerted on ZBTO, which generated a larger electric polarization field than those on ZnTiO3·TiO2 and BaTiO3 as analyzed by a finite element method. This high-intensity electric polarization field accelerated the separation and transportation of photoexcited charge carriers in the highly sunlight responsive nanopiezoelectric heterostructures based on ZBTO-Pt and ZBTO-FeOx.

Macroscopic rods from assembled colloidal particles of hydrothermally carbonized glucose and their use as templates for silicon carbide and tricopper silicide.

Self-aggregated colloids can be used for the preparation of materials, and we studied long rod-like aggregates formed on the evaporation of water from dispersed particles of colloidal hydrochar. The monodispersed hydrochar particles (100-200 nm) were synthesized by the hydrothermal carbonization of glucose and purified through dialysis. During the synthesis they formed colloidal dispersions which were electrostatically stable at intermediate to high pH and at low ion strengths. On the evaporation of water, macroscopically large rods formed from the dispersions at intermediate pH conditions. The rods formed at the solid-water interface orthogonally oriented with respect to the drying direction. Pyrolysis rendered the rods highly porous without qualitatively affecting their shape. A Cu-Si alloy was reactively infiltrated into the in-situ pyrolyzed hydrochars and composites of tricopper silicide (Cu3Si)-silicon carbide (SiC)/carbon formed. During this process, the Si atoms reacted with the C atoms, which in turned caused the alloy to wet and further react with the carbon. The shape of the underlying carbon template was maintained during the reactions, and the formed composite preparation was subsequently calcined into a Cu3Si-SiC-based replica of the rod-like assemblies of carbon-based colloidal particles. Transmission and scanning electron microscopy, and X-ray diffraction were used to study the shape, composition, and structure of the formed solids. Further studies of materials prepared with reactive infiltration of alloys into self-aggregated and carbon-based solids can be justified from a perspective of colloidal science, as well as the explorative use of hydrochar prepared from real biomass, exploration of the compositional space in relation to the reactive infiltration, and applications of the materials in catalysis.

Graphitic nitrogen in carbon catalysts is important for the reduction of nitrite as revealed by naturally abundant 15N NMR spectroscopy.

Metal-free nitrogen-doped carbon is considered as a green functional material, but the structural determination of the atomic positions of nitrogen remains challenging. We recently demonstrated that directly-excited solid state 15N NMR (ssNMR) spectroscopy is a powerful tool for the determination of such positions in N-doped carbon at natural 15N isotope abundance. Here we report a green chemistry approach for the synthesis of N-doped carbon using cellulose as a precursor, and a study of the catalytic properties and atomic structures of the related catalyst. N-doped carbon (NH3) was obtained by the oxidation of cellulose with HNO3 followed by ammonolysis at 800 °C. It had a N content of 6.5 wt% and a surface area of 557 m2 g-1, and 15N ssNMR spectroscopy provided evidence for graphitic nitrogen besides regular pyrrolic and pyridinic nitrogen. This structural determination allowed probing the role of graphitic nitrogen in electrocatalytic reactions, such as the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and nitrite reduction reaction. The N-doped carbon catalyst (NH3) showed higher electrocatalytic activities in the OER and HER under alkaline conditions and higher activity for nitrite reduction, as compared with a catalyst prepared by the carbonization of HNO3-treated cellulose in N2. The electrocatalytic selectivity for nitrite reduction of the N-doped carbon catalyst (NH3) was directly related to the graphitic nitrogen functions. Complementary structural analyses by means of 13C and 1H ssNMR, scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and low-temperature N2 adsorption were performed and provided support to the findings. The results show that directly-excited 15N ssNMR spectroscopy at natural 15N abundance is generally capable of providing information on N-doped carbon materials if relaxation properties are favorable. It is expected that this approach can be applied to a wide range of solids with an intermediate concentration of N atoms.

Selective Adsorption of CO2 on Zeolites NaK-ZK-4 with Si/Al of 1.8-2.8.

Zeolites with appropriately narrow pore apertures can kinetically enhance the selective adsorption of CO2 over N2. Here, we showed that the exchangeable cations (e.g., Na+ or K+) on zeolite ZK-4 play an important role in the CO2 selectivity. Zeolites NaK ZK-4 with Si/Al = 1.8-2.8 had very high CO2 selectivity when an intermediate number of the exchangeable cations were K+ (the rest being Na+). Zeolites NaK ZK-4 with Si/Al = 1.8 had high CO2 uptake capacity and very high CO2-over-N2 selectivity (1190). Zeolite NaK ZK-4 with Si/Al = 2.3 and 2.8 also had enhanced CO2 selectivity with an intermediate number of K+ cations. The high CO2 selectivity was related to the K+ cation in the 8-rings of the α-cage, together with Na+ cations in the 6-ring, obstructing the diffusion of N2 throughout the zeolite. The positions of the K+ cation in the 8-ring moved slightly (max 0.2 Å) toward the center of the α-cage upon the adsorption of CO2, as revealed by in situ X-ray diffraction. The CO2-over-N2 selectivity was somewhat reduced when the number of K+ cations approached 100%. This was possibly due to the shift in the K+ cation positions in the 8-ring when the number of Na+ was going toward 0%, allowing N2 diffusion through the 8-ring. According to in situ infrared spectroscopy, the amount of chemisorbed CO2 was reduced on zeolite ZK-4s with increasing Si/Al ratio. In the context of potential applications, a kinetically enhanced selection of CO2 could be relevant for applications in carbon capture and bio- and natural gas upgrading.

A Porphyrinic Zirconium Metal-Organic Framework for Oxygen Reduction Reaction: Tailoring the Spacing between Active-Sites through Chain-Based Inorganic Building Units.

The oxygen reduction reaction (ORR) is central in carbon-neutral energy devices. While platinum group materials have shown high activities for ORR, their practical uses are hampered by concerns over deactivation, slow kinetics, exorbitant cost, and scarce nature reserve. The low cost yet high tunability of metal-organic frameworks (MOFs) provide a unique platform for tailoring their characteristic properties as new electrocatalysts. Herein, we report a new concept of design and present stable Zr-chain-based MOFs as efficient electrocatalysts for ORR. The strategy is based on using Zr-chains to promote high chemical and redox stability and, more importantly, tailor the immobilization and packing of redox active-sites at a density that is ideal to improve the reaction kinetics. The obtained new electrocatalyst, PCN-226, thereby shows high ORR activity. We further demonstrate PCN-226 as a promising electrode material for practical applications in rechargeable Zn-air batteries, with a high peak power density of 133 mW cm-2. Being one of the very few electrocatalytic MOFs for ORR, this work provides a new concept by designing chain-based structures to enrich the diversity of efficient electrocatalysts and MOFs.

Effects of Metal Ions, Metal, and Metal Oxide Particles on the Synthesis of Hydrochars.

Global concerns regarding climate change and the energy crisis have stimulated, among other things, research on renewable and sustainable materials. In relation to that, hydrothermal carbonization of wet biomass has been shown to be a low-cost method for the production of hydrochars. Such hydrochars can be refined into materials that can be used in water purification, for CO2 capture, and in the energy sector. Here, we review the use of metal ions and particles to catalyze the formation of hydrochars and related hybrid materials. First, the effects of using silver, cobalt, tellurium, copper ions, and particles on the hydrothermal carbonization of simple sugars and biomass are discussed. Second, we discuss the structural effects of iron ions and particles on the hydrochars in conjunction with their catalytic effects on the carbonization. Among the catalysts, iron ions or oxides have low cost and allow magnetic features to be introduced in carbon-containing hybrid materials, which seems to be promising for commercial applications.