Synthesis of nickel-sphere coated Ni-Mn layer for efficient electrochemical detection of urea.

Using a trustworthy electrochemical sensor in the detection of urea in real blood samples received a great attention these days. A thin layer of nickel-coated nickel-manganese (Ni@NiMn) is electrodeposited on a glassy carbon electrode (GC) (Ni@NiMn/GC) surface and used to construct the electrochemical sensor for urea detection. Whereas, electrodeposition is considered as strong technique for the controllable synthesis of nanoparticles. Thus, X-ray diffraction (XRD), atomic force microscope (AFM), and scanning electron microscope (SEM) techniques were used to characterize the produced electrode. AFM and SEM pictures revealed additional details about the surface morphology, which revealed a homogenous and smooth coating. Furthermore, electrochemical research was carried out in alkaline medium utilizing various electrochemical methods, including cyclic voltammetry (CV), chronoamperometry (CA), and electrochemical impedance spectroscopy (EIS). The electrochemical investigations showed that the electrode had good performance, high stability and effective charge transfer capabilities. The structural, morphological, and electrochemical characteristics of Ni@NiMn/GC electrodes were well understood using the analytical and electrochemical techniques. The electrode showed a limit of detection (LOD) equal to 0.0187 µM and a linear range of detection of 1.0-10 mM of urea. Furthermore, real blood samples were used to examine the efficiency of the prepared sensor. Otherwise, the anti-interfering ability of the modified catalyst was examined toward various interfering species.

Modified NiFe2O4-Supported Graphene Oxide for Effective Urea Electrochemical Oxidation and Water Splitting Applications.

The production of green hydrogen using water electrolysis is widely regarded as one of the most promising technologies. On the other hand, the oxygen evolution reaction (OER) is thermodynamically unfavorable and needs significant overpotential to proceed at a sufficient rate. Here, we outline important structural and chemical factors that affect how well a representative nickel ferrite-modified graphene oxide electrocatalyst performs in efficient water splitting applications. The activities of the modified pristine and graphene oxide-supported nickel ferrite were thoroughly characterized in terms of their structural, morphological, and electrochemical properties. This research shows that the NiFe2O4@GO electrode has an impact on both the urea oxidation reaction (UOR) and water splitting applications. NiFe2O4@GO was observed to have a current density of 26.6 mA cm-2 in 1.0 M urea and 1.0 M KOH at a scan rate of 20 mV s-1. The Tafel slope provided for UOR was 39 mV dec-1, whereas the GC/NiFe2O4@GO electrode reached a current of 10 mA cm-2 at potentials of +1.5 and -0.21 V (vs. RHE) for the OER and hydrogen evolution reaction (HER), respectively. Furthermore, charge transfer resistances were estimated for OER and HER as 133 and 347 Ω cm2, respectively.

Construction of chitosan-supported nickel cobaltite composite for efficient electrochemical capacitor and water-splitting applications.

The construction of highly efficient electrode material is of considerable interest, particularly for high capacitance and water-splitting applications. Herein, we present the preparation of a NiCo2O4-Chitosan (NC@Chit) nanocomposite using a simple hydrothermal technique designed for applications in high capacitance and water-splitting. The structure/composition of the NC@Chit composite was characterized using different analytical methods, containing electron microscope (SEM and TEM), and powder X-ray diffraction (XRD). When configured as an anode material, the NC@Chit displayed a high capacitance of 234 and 345 F g-1 (@1Ag-1 for GC/NC and NC@Chit, respectively) in an alkaline electrolyte. The direct use of the catalyst in electrocatalytic water-splitting i.e., HER and OER achieved an overpotential of 240 mV and 310 mV at a current density of 10 mA cm-2, respectively. The obtained Tafel slopes for OER and HER were 62 and 71 mV dec-1, respectively whereas the stability and durability of the fabricated electrodes were assessed through prolonged chronoamperometry measurement at constant for 10 h. The electrochemical water splitting was studied for modified nickel cobaltite surface using an impedance tool, and the charge transfer resistances were utilized to estimate the electrode activity.

High-performance spinel NiMn2O4 supported carbon felt for effective electrochemical conversion of ethylene glycol and hydrogen evolution applications.

One of the most effective electrocatalysts for electrochemical oxidation reactions is NiMn2O4 spinel oxide. Here, a 3-D porous substrate with good conductivity called carbon felt (CF) is utilized. The composite of NiMn2O4-supported carbon felt was prepared using the facile hydrothermal method. The prepared electrode was characterized by various surface and bulk analyses like powder X-ray diffraction, X-ray photon spectroscopy (XPS), Scanning and transmitted electron microscopy, thermal analysis (DTA), energy dispersive X-ray (EDX), and Brunauer-Emmett-Teller (BET). The activity of NiMn2O4 toward the electrochemical conversion of ethylene glycol at a wide range of concentrations was investigated. The electrode showed a current density of 24 mA cm-2 at a potential of 0.5 V (vs. Ag/AgCl). Furthermore, the ability of the electrode toward hydrogen evaluation in an alkaline medium was performed. Thus, the electrode achieved a current density equal 10 mA cm-2 at an overpotential of 210 mV (vs. RHE), and the provided Tafel slope was 98 mV dec-1.

Synergetic effect of essential oils and calcium phosphate nanoparticles for enhancement the corrosion resistance of titanium dental implant.

Calcium phosphate (CaPO4) coating is one of various methods that is used to modify the topography and the chemistry of Ti dental implant surface to solve sever oral problems that result from diseases, accidents, or even caries due to its biocompatibility. In this work, anodized (Ti-bare) was coated by CaPO4 prepared from amorphous calcium phosphate nanoparticles (ACP-NPs) and confirmed the structure by X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FT-IR) techniques. Ti-bare was coated by prepared CaPO4 through the casting process, and the morphology of Ti/CaPO4 was characterized by scanning electron microscope (SEM) where the nano-flakes shape of CaPO4 and measured to be 60 ~ 80 nm was confirmed. The stability of Ti-bare and coated Ti/CaPO4 was studied in a simulated saliva solution using electrochemical impedance spectroscopy (EIS) and linear polarization techniques to deduce their corrosion resistance. Furthermore, three essential oils (EO), Cumin, Thyme, and Coriander, were used to stimulate their synergistic effect with the CaPO4 coat to enhance the corrosion resistance of Ti implant in an oral environment. The fitting EIS parameters based on Rs [RctC]W circuit proved that the charge transfer resistance (Rct) of Ti/CaPO4 increased by 264.4, 88.2, and 437.5% for Cumin, Thyme, and Coriander, respectively, at 2% concentration.

Green synthesis of Ag nanoparticle supported on graphene oxide for efficient nitrite sensing in a water sample.

Water is essential for conserving biodiversity, ecology, and human health, but because of population growth and declining clean water supplies, wastewater must be treated to meet demand. Nitrite is one of the contaminants in wastewater that is well-known. It is crucial to identify nitrite since it can be fatal to humans in excessive doses. Utilizing a straightforward and effective electrochemical sensor, nitrite in actual water samples may be determined electrochemically. The sensor is created by coating the surface of a GC electrode with a thin layer of graphene oxide (GO), followed by a coating of silver nanoparticles. The modified electrode reached a linear detection range of 1-400 µM. thus, the activity of the electrode was investigated at different pH values ranging from 4 to 10 to cover acidic to highly basic environments. However, the electrode recorded limit of detection (LOD) is equal to 0.084, 0.090, and 0.055 µM for pH 4, 7, and 10, respectively. Additionally, the electrode activity was utilized in tap water and wastewater that the LOD reported as 0.16 and 0.157 µM for tape water and wastewater, respectively.

Green Synthesis of NiFe2O4 Nano-Spinel Oxide-Decorated Carbon Nanotubes for Efficient Capacitive Performance-Effect of Electrolyte Concentration.

Energy storage applications received great attention due to environmental aspects. A green method was used to prepare a composite of nickel-iron-based spinel oxide nanoparticle@CNT. The prepared materials were characterized by different analytical methods like X-ray diffraction, X-ray photon spectroscopy (XPS), scanning electron microscopy (SEM), and transmitted electron microscopy (TEM). The synergistic effect between nickel-iron oxide and carbon nanotubes was characterized using different electrochemical methods like cyclic voltammetry (CV), galvanostatic charging/discharging (GCD), and electrochemical impedance spectroscopy (EIS). The capacitances of the pristine NiFe2O4 and NiFe2O4@CNT were studied in different electrolyte concentrations. The effect of OH- concentrations was studied for modified and non-modified surfaces. Furthermore, the specific capacitance was estimated for pristine and modified NiFe2O4 at a wide current range (5 to 17 A g-1). Thus, the durability of different surfaces after 2000 cycles was studied, and the capacitance retention was estimated as 78.8 and 90.1% for pristine and modified NiFe2O4. On the other hand, the capacitance rate capability was observed as 65.1% (5 to 17 A g-1) and 62.4% (5 to 17 A g-1) for NiFe2O4 and NiFe2O4@CNT electrodes.

Synthesis and characterization of lead-based metal-organic framework nano-needles for effective water splitting application.

Metal organic frameworks (MOFs) are a class of porous materials characterized by robust linkages between organic ligands and metal ions. Metal-organic frameworks (MOFs) exhibit significant characteristics such as high porosity, extensive surface area, and exceptional chemical stability, provided the constituent components are meticulously selected. A metal-organic framework (MOF) containing lead and ligands derived from 4-aminobenzoic acid and 2-carboxybenzaldehyde has been synthesized using the sonochemical methodology. The crystals produced were subjected to various analytical techniques such as Fourier-transform infrared spectroscopy (FT-IR), Powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), Brunauer-Emmett-Teller (BET), and thermal analysis. The BET analysis yielded results indicating a surface area was found to be 1304.27 m2 g-1. The total pore volume was estimated as 2.13 cm3 g-1 with an average pore size of 4.61 nm., rendering them highly advantageous for a diverse range of practical applications. The activity of the modified Pb-MOF electrode was employed toward water-splitting applications. The electrode reached the current density of 50 mA cm-2 at an overpotential of - 0.6 V (vs. RHE) for hydrogen evolution, and 50 mA cm-2 at an overpotential of 1.7 V (vs. RHE) for oxygen evolution.

Chitosan Supports Boosting NiCo2O4 for Catalyzed Urea Electrochemical Removal Application.

Currently, wastewater containing high urea levels poses a significant risk to human health. Else, electrocatalytic methodologies have the potential to transform urea present in urea-rich wastewater into hydrogen, thereby contributing towards environmental conservation and facilitating the production of sustainable energy. The characterization of the NiCo2O4@chitosan catalyst was performed by various analytical techniques, including scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). Furthermore, the activity of electrodes toward urea removal was investigated by several electrochemical techniques. As a function of current density, the performance of the modified NiCo2O4@chitosan surface was employed to remove urea using electrochemical oxidation. Consequently, the current density measurement was 43 mA cm-2 in a solution of 1.0 M urea and 1.0 M KOH. Different kinetic characteristics were investigated, including charge transfer coefficient (α), Tafel slope (29 mV dec-1), diffusion coefficient (1.87 × 10-5 cm2 s-1), and surface coverage 4.29 × 10-9 mol cm-2. The electrode showed high stability whereas it lost 10.4% of its initial current after 5 h of urea oxidation.

Zinc Nanocomposite Supported Chitosan for Nitrite Sensing and Hydrogen Evolution Applications.

Nanoparticles of ZnO-Chitosan (Zn-Chit) composite were prepared using precipitation methods. Several analytical techniques, such as scanning electron microscope (SEM), transmitted electron microscope (TEM), powder X-ray diffraction (XRD), infrared spectroscopy (IR), and thermal analysis, were used to characterize the prepared composite. The activity of the modified composite was investigated for nitrite sensing and hydrogen production applications using various electrochemical techniques. A comparative study was performed for pristine ZnO and ZnO loaded on chitosan. The modified Zn-Chit has a linear range of detection 1-150 µM and a limit of detection (LOD) = 0.402 µM (response time ~3 s). The activity of the modified electrode was investigated in a real sample (milk). Furthermore, the anti-interference capability of the surface was utilized in the presence of several inorganic salts and organic additives. Additionally, Zn-Chit composite was employed as an efficient catalyst for hydrogen production in an acidic medium. Thus, the electrode showed long-term stability toward fuel production and enhanced energy security. The electrode reached a current density of 50 mA cm-2 at an overpotential equal to -0.31 and -0.2 V (vs. RHE) for GC/ZnO and GC/Zn-Chit, respectively. Electrode durability was studied for long-time constant potential chronoamperometry for 5 h. The electrodes lost 8% and 9% of the initial current for GC/ZnO and GC/Zn-Chit, respectively.

Polyaniline-Supported Nickel Oxide Flower for Efficient Nitrite Electrochemical Detection in Water.

A modified electrode with conducting polymer (Polyaniline) and NiO nanoflowers was prepared to detect nitrite ions in drinking water. A simple method was used to prepare the NiO nanoflower (NiOnF). Several techniques characterized the as-prepared NiOnF to determine the chemical structure and surface morphology of the NiO, such as XRD, XPS, FT-IR, and TGA. The activity of the electrode toward nitrite sensing was investigated over a wide range of pH (i.e., 2 to 10). The amperometry method was used to determine the linear detection range and limit. Accordingly, the modified electrode GC/PANI/NiOnf showed a linear range of detection at 0.1-1 µM and 1-500 µM. At the same time, the limit of detection (LOD) was 9.7 and 64 nM for low and high concentrations, respectively. Furthermore, the kinetic characteristics of nitrite, such as diffusion and transport coefficients, were investigated in various media. Moreover, the charge transfer resistance was utilized for nitrite electrooxidation in different pH values by the electrochemical impedance technique (EIS). The anti-interfering criteria of the modified surfaces were utilized in the existence of many interfering cations in water (e.g., K+, Na+, Cu2+, Zn2+, Ba2+, Ca2+, Cr2+, Cd2+, Pd2+). A real sample of the Nile River was spiked with nitrite to study the activity of the electrode in a real case sample (response time ~4 s). The interaction between nitrite ions and NiO{100} surface was studied using DFT calculations as a function of adsorption energy.

Systematic DFT studies of CO-Tolerance and CO oxidation on Cu-doped Ni surfaces.

Nickel-based surfaces have received significant attention as an efficient substrate for electrooxidation. This work studied doped nickel surfaces with Cu atoms to enhance the CO-Tolerance. A comparative study was performed for CO adsorption upon different cleavage facets of pristine and Cu-doped nickel surfaces, whereas the adsorption energy, charge transfer, and density of state for CO were estimated using GGA-RPBE calculation method. Several adsorption probabilities were considered, and the change in adsorption energy and bond lengths were used to explain the CO adsorption mechanism. Otherwise, the density of state was employed to study the 3σ and 1π orbital to demonstrate the adsorption of CO onto the different facets. According to our analysis, the Cu-doped nickel surface showed higher CO tolerance than the pristine nickel surface. Whereas the calculated CO adsorption energies of Cu-doped surfaces have more positive values than the non-doped counterparts. The catalytic ability of pristine and Cu-doped Ni(111) was studied to evaluate the ability of surface poisoning resistance. Thus, oxidation of CO to CO2 was studied using the Eley-Rideal mechanism upon the pristine and Cu-doped surfaces of Ni(100) where the rate-determining step for CO oxidation upon the reported surfaces was estimated as CO + O2* → CO2* + O* by an energy barrier of 1.05 and 0.9 eV for pristine, and Cu-doped Ni (100).

Effect of vanillic acid on pentylenetetrazole-kindled rats: Nrf2/HO-1, IGF-1 signaling pathways cross talk.

Vanillic acid (VA) exhibited antioxidant and neuroprotective properties in some neurodegenerative disorders. So, the current study examined the neuroprotective potential of VA as an antiepileptic agent in pentylenetetrazole (PTZ)-induced epileptic rats and the prospective role of Insulin like growth factor-1 (IGF-1) and nuclear factor-2 erythroid-related factor-2 (Nrf2)/heme oxygenase-1 (HO-1) pathway in this respect. Thirty male albino rats were equally subdivided into 3 groups; (1) normal control (NC) group, (2) PTZ-group: received PTZ (50 mg/Kg, i.p. every other day) for 14 days, and (3) PTZ + VA group: received PTZ and VA (50 mg/Kg daily for 2 weeks). The seizure score and latency were evaluated after PTZ injection. Also, the markers of oxidative stress (malondialdehyde (MDA), catalase, and reduced glutathione (GSH)), histopathological examination, the expression of glial fibrillary acidic protein (GFAP) (a marker of astrocytes) IGF-1, Nrf2, and HO-1 were assessed in the brain tissues by the end of the experiment. PTZ caused significant decrease in seizure latency and significant increase in seizure score by the end of the experiment (p < 0.01). This was associated with significant increase in MDA and GFAP with significant decrease in GSH, total antioxidant capacity (TAC) and IGF-1 in brain tissues compared to normal group (p < 0.01). On the other hand, treatment with VA caused significant attenuation in PTZ-induced seizures which was associated with significant improvement in oxidative stress markers and downregulation in GFAP and upregulation of Nrf2, HO-1 and IGF-1 in CA3 hippocampal region (p < 0.01). VA showed neuroprotective and anti-epileptic effects against PTZ-induced epilepsy which probably might be due to its antioxidant properties and upregulation of Nrf2/HO-1 pathway and IGF-1.