ABSTRACT
Vaporization enthalpies of a series of ten 1-alkyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ionic liquids (ILs) [C(n) mim][NTf(2) ] with alkyl chain lengths of n=2, 3, 4, 6, 8, 10, 12, 14, 16, and 18 are determined by using a recently developed quartz crystal microbalance method. Due to the high sensitivity of the microbalance vapor studies can be extended to temperatures 60-100 K lower than those available with other methods. The results reveal a remarkably linear dependence of the vaporization enthalpies on the chain length at the reference temperature of 298 K.
ABSTRACT
Thermochemical studies of the ionic liquids 1-ethyl-3-methylimidazolium tricyanomethanide [C(2)MIM][C(CN)(3)] and 1-butyl-3-methylimidazolium tricyanomethanide [C(4)MIM][C(CN)(3)] have been performed in this work. Vaporization enthalpies have been obtained using a recently developed quartz crystal microbalance (QCM) technique. The molar enthalpies of formation of these ionic liquids in the liquid state were measured by means of combustion calorimetry. A combination of the results obtained from QCM and combustion calorimetry lead to values of gaseous molar enthalpies of formation of [C(n)MIM][C(CN)(3)]. First-principles calculations of the enthalpies of formation in the gaseous phase for the ionic liquids [C(n)MIM][C(CN)(3)] have been performed using the CBS-QB3 and G3MP2 theory and have been compared with the experimental data. Furthermore, experimental results of enthalpies of formation of imidazolium-based ionic liquids with the cation [C(n)MIM] (where n = 2 and 4) and anions [N(CN)(2)], [NO(3)], and [C(CN)(3)] available in the literature have been collected and checked for consistency using a group additivity procedure. It has been found that the enthalpies of formation of these ionic liquids roughly obey group additivity rules.
ABSTRACT
A new method for the determination of vaporization enthalpies of extremely low volatile ILs has been developed using a newly constructed quartz crystal microbalance (QCM) vacuum setup. Because of the very high sensitivity of the QCM it has been possible to reduce the average temperature of the vaporization studies by approximately 100 K in comparison to other conventional techniques. The physical basis of the evaluation procedure has been developed and test measurements have been performed with the common ionic liquid 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide [C(2)mim][NTf(2)] extending the range of measuring vaporization enthalpies down to 363 K. The results obtained for [C(2)mim][NTf(2)] have been tested for thermodynamic consistency by comparison with data already available at higher temperatures. Comparison of the temperature-dependent vaporization enthalpy data taken from the literature show only acceptable agreement with the heat capacity difference of -40 J K(-1) mol(-1). The method developed in this work opens also a new way to obtain reliable values of vaporization enthalpies of thermally unstable ionic liquids.
ABSTRACT
The interaction of natural α-, ß-, and γ-cyclodextrins (CDs) with 14 hydrophobic ionic moieties of ionic liquids (ILs) was systematically examined in dilute aqueous solutions using isothermal titration microcalorimetry (ITC) and NMR spectroscopy. The studied cationic and anionic moieties involved some recently developed heavily fluorinated structures, as well as some others of common use. To isolate the effect of a given ion, the measurements were performed on salts containing the hydrophobic IL ion in question and a complexation-inactive counterion. Additional ITC experiments on ILs whose both cation and anion can interact appreciably with the CD cavity demonstrated that to resolve the effect of individual ions from such data is generally a tricky task and confirmed the superiority of the isolation strategy adopted for the purpose throughout this work. The binding constant, enthalpy and entropy determined at 298.15 K for the 1:1 (ion:CD) inclusion complex formation range in broad limits, being 0 < K < 2 × 10(5), 0 < -Δ(r)H°/(kJ·mol(-1)) < 44, and -28 < TΔ(r)S°/(kJ·mol(-1)) < 14, respectively. The stabilities of complexes of perfluorohexyl bearing ions with ß-CD belong to the highest ever observed with natural CDs in water. The established binding affinity scales were discussed in both thermodynamic and molecular terms. The concepts of hydrophobic interaction and guest-host size matching supported by simple molecular modeling proved useful to rationalize the observed widely different binding affinities and suggest possible binding modes. Enthalpy and entropy contributions to the stability of the ion-CD complexes were found to compensate each other considerably obeying more or less the linear compensation relationship marked by existing literature data on binding other guests to natural CDs. As outliers to this pattern, the most stable complexes of -C(6)F(13) bearing ions with ß-CD were found to receive an enhanced inherent entropy stabilization due to extraordinarily high extent of desolvation occurring in the course of binding.
Subject(s)
Cyclodextrins/chemistry , Ionic Liquids/chemistry , Hydrophobic and Hydrophilic Interactions , Models, Molecular , Molecular Conformation , ThermodynamicsABSTRACT
In this work the molar enthalpy of formation of the ionic liquid 1-ethyl-3-methylimidazolium dicyanoamide in the gaseous phase [C(2)MIM][N(CN)(2)] was measured by means of combustion calorimetry and enthalpy of vaporization using transpiration. Available, but scarce, primary experimental results on enthalpies of formation of imidazolium based ionic liquids with the cation [C(n)MIM] (where n = 2 and 4) and anions [N(CN)(2)], [NO(3)] and [NTf(2)] were collected and checked for consistency using a group additivity procedure. First-principles calculations of the enthalpies of formation in the gaseous phase for the ionic liquids with the common cation [C(n)MIM] (where n = 2 and 4) and with the anions [N(CN)(2)], [NO(3)], [NTf(2)], [Cl], [BF(4)] and [PF(6)] have been performed using the G3MP2 theory. It has been established that the gaseous phase enthalpies of formation of these ionic liquids obey the group additivity rules.
ABSTRACT
In this work data of the molar enthalpies of formation of the ionic liquid 1-methylimidazolium nitrate [H-MIM][NO3] was measured by means of combustion calorimetry. The molar enthalpy of fusion of [H-MIM][NO3] was measured using DSC. Experiments to vaporize the ionic liquid into vacuum or nitrogen stream in order to obtain vaporization enthalpy have been performed. Ab initio calculations of the enthalpy of formation in the gaseous phase have been performed for the ionic species using the G3MP2 theory. The combination of traditional combustion calorimertry with modern high-level ab initio calculations allow the determination of the molar enthalpy of vaporization of the ionic liquid under study. The ab initio calculations indicate that [H-MIM][NO3] is most probably separated into the neutral species methyl-imidazole and HNO3 in the gaseous phase at conditions of the vaporization experiments.
Subject(s)
Imidazoles/chemistry , Imidazolines/chemistry , Ionic Liquids/chemistry , Quantum Theory , Thermodynamics , Calorimetry , Computer Simulation , Gases/chemistry , Models, ChemicalABSTRACT
A recently developed statistical-mechanical model for calculating Kirkwood correlation factors g(K) in self associating liquids and liquid mixtures has been applied for the simultaneous description of g(K) derived from dielectric constant data, the molar enthalpy of mixing H, and the infrared absorbtion of monomeric alcoholic species as function of the composition in alkanol + CCl(4) mixtures. The alkanols are methanol, ethanol, propanol, butan-1-ol, pentan-1-ol, hexan-1-ol, octan-1-ol, sec-butanol, tert-butanol and pentan-3-ol. The majority of parameters involved in the theory are obtained by independent quantum mechanical ab initio calculations of molecular clusters consisting of up to four alcohol molecules. As a consequence only two parameters have to be adjusted freely to each binary system, a third parameter responsible for the non-specific intermolecular dispersion interaction has been adjusted within a limited range of possible values given by physical arguments. Excellent agreement between theory and experimental data for g(K), H and IR absorbance is obtained covering the whole range of concentration. The theory also rationalizes the temperature dependence of these properties without adjusting further parameters. The Kirkwood correlation factor g(K) turns out to be a sensitive response to peculiarities of the molecular structure of hydrogen-bonded systems in the condensed liquid state.
ABSTRACT
The standard molar enthalpy of formation of the ionic liquid 1-butyl-1-methylpyrrolidinium dicyanamide has been determined at 298 K by means of combustion calorimetry, while the enthalpy of vaporization and the mass spectrum of the vapor (ion pairs) have been determined by temperature-programmed desorption and line of sight mass spectrometry. Ab initio calculations for 1-butyl-1-methylpyrrolidinium dicyanamide have been performed using the G3MP2 and CBS-QB3 theory, and the results from homodesmic reactions are in excellent agreement with the experiments.
ABSTRACT
In this work, the molar enthalpies of formation of the ionic liquids [C2MIM][NO3] and [C4MIM][NO3] were measured by means of combustion calorimetry. The molar enthalpy of fusion of [C2MIM][NO3] was measured using differential scanning calorimetry. Ab initio calculations of the enthalpy of formation in the gaseous phase have been performed for the ionic species using the G3MP2 theory. We have used a combination of traditional combustion calorimetry with modern high-level ab initio calculations in order to obtain the molar enthalpies of vaporization of a series of the ionic liquids under study.
ABSTRACT
A recently developed statistical mechanical model for predicting Kirkwood factors in self-associating molecular liquids and their mixtures with nonassociating components has been applied for the simultaneous description of the Kirkwood correlation factor, gK, and the molar enthalpy of mixing, Hm(E), as a function of the composition in alkanol-heptane mixtures. Most of the molecular parameters involved in the theory have been fixed by independent quantum mechanical ab initio calculations of associated molecular clusters. The model is also able to predict other thermodynamic mixture properties such as the enthalpy of mixing. Experimental results of nine alcohol-heptane mixtures taken from the literature have been used to test the new model. The Kirkwood correlation factor gK and the molar enthalpy of mixing Hm(E) can be described simultaneously with an excellent agreement with experimental data covering the whole range of mole fraction, including temperature dependence. Two parameters have been adjusted freely for each system. A third parameter for the nonspecific intermolecular dispersion interactions has been adjusted within a limited range of possible values given by physical arguments. The successful application of the model opens a new way to a more reliable understanding of structures and equilibrium properties of such liquid systems.
ABSTRACT
A recently developed statistical mechanical model for calculating Kirkwood correlation factors gK in self associating liquids and liquid mixtures has been applied for the simultaneous description of gK, the molar enthalpy of mixing HEM and the infrared absorption of monomer alcoholic species as function of the composition in alkanol + hexane and alkanol + pentane mixtures (alkanol: butan-1-ol, pentan-1-ol, hexan-1-ol, heptan-1-ol, sec-butanol, tert-butanol). The majority of parameters involved into the theory are obtained by independent quantum mechanical ab initio calculations of molecular clusters consisting of up to four alcohol molecules. As a consequence only two parameters have to be adjusted freely to each binary system, a third parameter responsible for the non specific intermolecular dispersion interaction has been adjusted within a limited range of possible values given by physical arguments. Excellent agreement between theory and experimental data of gK, HEM and IR absorbance is obtained covering the whole range of concentration including the temperature dependence of these properties without adjusting further parameters. The Kirkwood correlation factor gK turns out to be a sensitive response to peculiarities of the molecular structure of hydrogen bonded systems in the condensed liquid state. The successful application of the theoretical model opens a new way of a deeper and more reliable understanding of such liquid structures.
Subject(s)
Alcohols/chemistry , Hexanes/chemistry , Models, Chemical , Models, Statistical , Pentanes/chemistry , Quantum Theory , Hydrogen Bonding , Sensitivity and Specificity , TemperatureABSTRACT
A new statistical mechanical model for calculating Kirkwood factors in self-associating molecular liquids and their mixtures with nonassociating components has been developed in a consistent way which is based on an extended version of the Flory-Huggins model taking into account chemical association equilibria. The majority of molecular parameters involved into the theory has been fixed by independent quantum mechanical ab initio calculations of associated molecular clusters. The model is also able to predict other thermodynamic mixture properties such as the enthalpy of mixing and also the infrared absorbance of monomer alcohol species as function of concentration. Experimental results of nine alcohol+cyclohexane mixtures taken from the literature have been used to test the new model. The Kirkwood correlation factor gK, the molar enthalpy of mixing HmE, and the monomer IR absorbance can be described simultaneously in excellent agreement with experimental data covering the whole range of mole fraction including temperature dependence of gK, HmE, and the IR absorbance. Two parameters have been adjusted freely for each system. A third parameter for the nonspecific intermolecular dispersion interactions has been adjusted within a limited range of possible values given by physical arguments. The model opens a new way of a more reliable understanding of structures and equilibrium properties of hydrogen bonded systems in the condensed liquid state.
ABSTRACT
The chemical equilibrium of the reactive system (methanol+isoamylenes<-->methyl tert-amyl ether) was studied in the temperature range 298-393 K in the liquid phase using the method of sealed ampoules as well as in the gaseous phase using a tubular flow reactor in the temperature range 355-378 K. In both cases, a cation exchanger Amberlist-15 was used as a heterogeneous catalyst. The reactive system of the methyl tert-amyl ether synthesis exhibits a strong nonideal behavior of the mixture compounds in the liquid phase. The knowledge of the activity coefficients is required in order to obtain the thermodynamic equilibrium constants Ka. Two well-established procedures, UNIFAC and COSMO-RS, have been used to assess activity coefficients of the reaction participants in the liquid phase. Thermodynamic equilibrium constants KP measured in the gaseous phase together with the vapor pressures of the pure compounds have been used to obtain Ka in the liquid phase on a consistent experimental basis in order to check the results obtained from the UNIFAC and COSMO-RS methods. Enthalpies of reactions DeltarH degrees of the methyl tert-amyl ether synthesis reaction in the gaseous and in the liquid phase were obtained from temperature dependences of the corresponding thermodynamic equilibrium constants. Consistency of the experimental data of DeltarH degrees was verified with help of enthalpies of formation and enthalpies of vaporization of methyl tert-amyl ether, methanol, and methyl-butenes, available from the literature. For the sake of comparison, high-level ab initio calculations of the reaction participants have been performed using the Gaussian-03 program package. Absolute electronic energy values, normal frequencies (harmonic approximation), and moments of inertia of the molecules have been obtained using G2(MP2), G3(MP2), and G3 levels. Using these results, calculated equilibrium constants and the enthalpy of reaction of the methyl tert-amyl ether synthesis in the gaseous phase based on the principles of statistical thermodynamics are found to be in acceptable agreement with the data obtained from the thermochemical measurements.
ABSTRACT
Ionic liquids are attracting growing interest as alternatives to conventional molecular solvents. Experimental values of vapor pressure, enthalpy of vaporization, and enthalpy of formation of ionic liquids are the key thermodynamic quantities, which are required for the validation and development of the molecular modeling and ab initio methods toward this new class of solvents. In this work, the molar enthalpy of formation of the liquid 1-butyl-3-methylimidazolium dicyanamide, 206.2 +/- 2.5 kJ.mol-1, was measured by means of combustion calorimetry. The molar enthalpy of vaporization of 1-butyl-3-methylimidazolium dicyanamide, 157.2 +/- 1.1 kJ.mol-1, was obtained from the temperature dependence of the vapor pressure measured using the transpiration method. The latter method has been checked with measurements of 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide, where data are available from the effusion technique. The first experimental determination of the gaseous enthalpy of formation of the ionic liquid 1-butyl-3-methylimidazolium dicyanamide, 363.4 +/- 2.7 kJ.mol-1, from thermochemical measurements (combustion and transpiration) is presented. Ab initio calculations of the enthalpy of formation in the gaseous phase have been performed for 1-butyl-3-methylimidazolium dicyanamide using the G3MP2 theory. Excellent agreement with experimental results has been observed. The method developed opens a new way to obtain thermodynamic properties of ionic liquids which have not been available so far.
ABSTRACT
The structures and ion-pair formation in the ionic liquid (IL) 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide are studied by a combination of FTIR measurements and DFT calculations. We could clearly distinguish imidazolium cations that are completely H-bonded to anions from those that are single H-bonded in ion pairs. Ion-pair formation already occurs in the neat IL and rises with temperature. Ion-pair formation is strongly promoted by dilution of the IL in chloroform. In these weakly polar environments ion pairs H-bonded via C(2)H are strongly favored over those H-bonded via C(4,5)H. This finding is in agreement with DFT (gas phase) calculations, which show a preference for ion pairs H-bonded via C(2)H as a result of the acidic C(2)H bond.
ABSTRACT
Vapor pressures for a series of 1-n-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (alkyl = ethyl, butyl, hexyl, and octyl) ionic liquids (ILs) were measured by the integral effusion Knudsen method. Thermodynamic parameters of vaporization for ILs were calculated from these data. The absence of decomposition of ILs during the vaporization process was proved by IR spectroscopy. Enthalpies of vaporization of ILs were correlated with molar volumes and surface tensions of the compounds.