Dietary fiber source and direct-fed microbial supplementation effects on lactation performance and feeding behavior of high-producing dairy cows.

The objective of this study was to evaluate the effects of dietary fiber source and direct-fed microbial supplementation on lactation performance and feeding behavior of high-producing dairy cows. Sixty-four multiparous Holstein cows (3.5 ± 1.6 lactations; 76 ± 22 DIM and 735 ± 67 kg of BW at covariate period initiation) and 32 gate feeders were enrolled in a study with a completely randomized design and a 2 × 2 factorial arrangement. Cows and gate feeders were randomly assigned to treatments (16 cows and 8 gate feeds per treatment). Cows were allowed 1 week to acclimate to feeding gates followed by a 2-week covariate period. During the acclimation and covariate periods, all cows were fed the same diet to meet or exceed the nutrient requirements. Following the covariate period, cows were enrolled in a 8-week treatment period during which cows were randomly assigned to 1 of 4 treatments consisting of forage inclusion in the diet, either 45.8% (LF) or 56.7% (HF) of DM, and the supplementation of 75 mL/hd/d of a direct-fed microbial (DFM) containing herbal extracts (mallow, mint, and sage), L. plantarum, L. buchneri, Saccharomyces cerevisiae, and sugar cane molasses (Valibiom Mix, Valibiotics, Traiskirchen, Austria) or without supplementation (CON). The average covariate period value of each variable was used as a covariate. Three-way interactions were observed for DMI and feed efficiency. Dry matter intake was 2 to 3 kg greater for LF-DFM than HF-CON and HF-DFM during wk 2, 3, 5, and 8 of the treatment period. Milk production was 2.1 kg/d greater for LF than HF diets. Both milk fat and MUN concentrations were greater for HF than LF diets. Conversely, milk protein concentration was lower for HF than LF diets. The respiration rate measured in the morning was lower with DFM supplementation than CON. Rectal temperature measured in the morning and averaged for the day were greater for LF than HF diets. Under the conditions of the present study, feeding high-forage diets may be an alternative for producers to reduce feeding costs depending on the price of purchased feeds. However, non-forage fiber sources (i.e., soy hulls) must be considered when producers are challenged by either forage shortages or forage with a lower nutritive value. Additionally, DFM supplementation reduced respiration rate in the morning and affected meal behavior of lactating cows.

Effects of a genetically modified corn hybrid with α-amylase and storage length on fermentation profile and starch disappearance of whole-plant corn silage and earlage.

Two experiments were conducted to evaluate the effects of a genetically modified corn hybrid with α-amylase expressed in the kernel (AMY) on fermentation profile, aerobic stability, nutrient composition, and starch disappearance of whole-plant corn silage (WPCS) and earlage. Both hybrids, AMY and an isogenic corn hybrid (ISO), were grown in 10 replicated plots (5 for WPCS and 5 for earlage). Samples of each plot were collected at harvest, homogenized, and divided into 5 subsamples which were randomly assigned to 5 storage lengths (0, 30, 60, 90, and 120 d). Both datasets (WPCS and earlage), were analyzed separately as a completely randomized block design in a factorial arrangement of treatments, with a model including the fixed effects of hybrid, storage length, and their interaction, and the random effect of block. Minor differences on fermentation profile were observed between AMY and ISO for WPCS and earlage. An interaction between hybrid and storage length was observed for DM losses in WPCS, where losses were similar at 30, 60 and 90 d, but lower for AMY compared with ISO at 120 d. No effect of hybrid was observed on yeast and mold counts for WPCS or earlage. The aerobic stability of WPCS was greater for AMY than ISO. For earlage, AMY had greater DM losses and aerobic stability than ISO. An interaction between hybrid and storage length was observed for ammonia-N in both WPCS and earlage, where ammonia-N was similar at 0 d but greater for AMY than ISO throughout later storage lengths. A similar interaction was observed for water-soluble carbohydrates (WSC) concentrations in WPCS, where ISO had greater WSC than AMY at 0 d but was similar throughout later storage lengths. However, AMY earlage had a greater WSC concentration throughout storage length, but a lesser magnitude after ensiling. Starch concentration was greater for AMY than ISO in WPCS and earlage. Greater starch disappearances at 0 h and 6 h were observed for ISO in WPCS and earlage. Minor effects on fermentation profile, microbial counts, aerobic stability and nutrient composition suggests that AMY can be ensiled for prolonged periods with no concerns for undesirable fermentation or nutrient losses. However, in situ starch disappearance was lower for AMY compared with ISO.

Effect of kernel breakage on the fermentation profile, nitrogen fractions, and in vitro starch digestibility of whole-plant corn silage and ensiled corn grain.

The objective of this experiment was to analyze the effect of kernel breakage on the fermentation profile, nitrogen fractions, and ruminal in vitro starch digestibility of whole-plant corn silage and ensiled corn grain. Whole corn plants were harvested, and ears were separated from the forage portion and shelled. Corn kernels were either left intact or broken manually using a hammer. The remaining forage portion of the corn plants was chopped. Samples of the intact and broken kernels were stored for 0 or 30 d in quadruplicate vacuum pouches. Remaining intact and broken kernels were each reconstituted with the chopped forage portion of the corn plant to simulate whole-plant corn forage and were also stored for 0 or 30 d. In kernels separated from whole-plant corn silage, kernel form had no effect on zein protein concentrations. However, it was observed that in vitro starch digestibility at 7 h increased with ensiling only in kernels that were broken. When corn kernels were ensiled alone, concentrations of soluble crude protein and ammonia nitrogen increased with ensiling to a greater extent when kernels were broken. Finally, fermentation of ensiled corn grain was enhanced when kernels were broken. Overall, this study gives insight into the importance of kernel breakage to improve starch digestibility in corn silage through means other than a reduction in particle size and opens the door for continued investigation into the proteolytic activity occurring in the silo.

Quantitative study of the production and properties of alginate/poly-L-lysine microcapsules.

Alginate-polylysine-alginate (APA) microcapsules are of particular interest for their application as implants or for bioreactor cultures. Although their formation has been widely studied, there is still a lack of quantitative data describing resistance, membrane thickness and permeability. In this study, the quantitative application of a Texture Analyser for the measurement of capsule deformation yielded important results that permit comparison with other polymer systems used for encapsulation. Furthermore, single-membrane and multi-membrane capsules were formed in order to improve the modulation of the capsule properties. For single-membrane capsules, resistance was mostly affected by the incubation time in poly-L-lysine (PLL), the PLL molecular weight and concentration. The increase in resistance from 0.1 +/- 0.01 g/capsules to 2 +/- 0.2 g/capsules was linked to a membrane thickening (35-120 microm) and a decrease in permeability (150 to 40 kD). Thus, it was not possible to modify resistance and membrane permeability independently. Multi-membrane capsules with a resistance comparable to single-membrane capsules could be formed using various combinations of PLL molecular weights, and enabled uncoupling of permeability and resistance properties.

Characterization of an encapsulation device for the production of monodisperse alginate beads for cell immobilization.

An encapsulation device, designed on the basis of the laminar jet break-up technique, is characterized for cell immobilization with different types of alginate. The principle of operation of the completely sterilizable encapsulator, together with techniques for the continuous production of beads from 250 microm to 1 mm in diameter, with a size distribution below 5%, at a flow rate of 1-15 mL/min, is described. A modification of the device, to incorporate an electrostatic potential between the alginate droplets and an internal electrode, results in enhanced monodispersity with no adverse effects on cell viability. The maximum cell loading capacity of the beads strongly depends on the nozzle diameter as well as the cells used. For the yeast Phaffia rhodozyma, it is possible to generate 700 microm alginate beads with an initial cell concentration of 1 x 10(8) cells/mL of alginate whereas only 1 x 10(6) cells/ml could be entrapped within 400 microm beads. The alginate beads have been characterized with respect to mechanical resistance and size distribution immediately after production and as a function of storage conditions. The beads remain stable in the presence of acetic acid, hydrochloric acid, water, basic water, and sodium ions. The latter stability applies when the ratio of sodium: calcium ions is less than 1/5. Complexing agents such as sodium citrate result in the rapid solubilization of the beads due to calcium removal. The presence of cells does not affect the mechanical resistance of the beads. Finally, the mechanical resistance of alginate beads can be doubled by treatment with 5-10 kDa chitosan, resulting in reduced leaching of cells.