Toward Three-Dimensional Printed Thermal Conductive Polymeric Composites Using a Binary-Composite Hybrid Based on Boron Nitride Nanoparticles and Micro-Diamonds.

Thermally conductive polymeric composites are promising for heat management in microelectronic devices. This work presents a binary-hybrid composite of boron nitride (BN) nanoparticles and micro-diamond (D) fillers in an elastomeric polyurethane (PU) matrix which can be three- dimensionally printed to produce a highly flexible and self-supporting structure. The research shows that a combination of 16.7 wt% BN and 16.7 wt% D results in a robust network within the polymer matrix to improve the tensile modulus more than nine times with respect to neat PU. Significantly, the hybrid matrix enhances the thermal conductivity by more than two times when compared to neat PU. The enhancement in mechanical, and thermal features make this three-dimensional printable multiscale hybrid composite suitable for flexible and stretchable microelectronic applications.

Mechanical and Tribological Performances of Thermoplastic Polymers Reinforced with Glass Fibres at Variable Fibre Volume Fractions.

High wear rates and frictional coefficients have always been the primary reasons for limiting the service life of critical elements such as pumps, couplings, bushings, bearings and gears. The premature and erratic failures are costing the industries extensive amounts of money every year. Additionally, under severe service conditions, the wear resistance requirements are higher, which greatly hinders the application of neat thermoplastics in different sectors. Hence, it is vital to enhance the tribological characteristics of thermoplastics. The mechanical and tribological properties of Polyamide 6, Thermoplastic Polyurethane, and glass fibre reinforced (GFR) Polyadmide 6 Composites of variable fibre volume fractions were investigated. Pin specimens of Polyamide 6 reinforced with (25%, 33%, and 50%) by volume of fibres were fabricated by an injection moulding process. The specimens were tested for tensile, compression, hardness, and wear under dry abrasive conditions using a pin-on-disc setup. Furthermore, the samples were scanned using micro-computed tomography (micro-CT), and the worn-out samples were analysed using field emission scanning electron microscopy. The experimental results showed that the fibre volume fraction was inversely proportional to the wear resistance of the prepared composite materials. This research will enable the industry partners to supply cutting-edge technologies to the global oil and gas industry that not only minimizes the well running cost but also improves the well resilience.

A biocompatible thermoset polymer binder for Direct Ink Writing of porous titanium scaffolds for bone tissue engineering.

There is increasing demand for synthetic bone scaffolds for bone tissue engineering as they can counter issues such as potential harvesting morbidity and restrictions in donor sites which hamper autologous bone grafts and address the potential for disease transmission in the case of allografts. Due to their excellent biocompatibility, titanium scaffolds have great potential as bone graft substitutes as they mimic the structure and properties of human cancellous bone. Here we report on a new thermoset bio-polymer which can act as a binder for Direct Ink Writing (DIW) of titanium artificial bone scaffolds. We demonstrate the use of the binder to manufacture porous titanium scaffolds with evenly distributed and highly interconnected porosity ideal for orthopaedic applications. Due to their porous structure, the scaffolds exhibit an effective Young's modulus similar to human cortical bone, alleviating undesirable stress-shielding effects, and possess superior strength. The biocompatibility of the scaffolds was investigated in vitro by cell viability and proliferation assays using human bone-marrow-derived Mesenchymal stem cells (hMSCs). The hMSCs displayed well-spread morphologies, well-organized F-actin and large vinculin complexes confirming their excellent biocompatibility. The vinculin regions had significantly larger Focal Adhesion (FA) area and equivalent FA numbers compared to that of tissue culture plate controls, showing that the scaffolds support cell viability and promote attachment. In conclusion, we have demonstrated the excellent potential of the thermoset bio-polymer as a Direct Ink Writing ready binder for manufacture of porous titanium scaffolds for hard tissue engineering.