Impacts of updated reaction kinetics on the global GEOS-Chem simulation of atmospheric chemistry.

We updated the chemical mechanism of the GEOS-Chem global 3-D model of atmospheric chemistry to include new recommendations from the NASA Jet Propulsion Laboratory (JPL) chemical kinetics Data Evaluation 19-5 and from the International Union of Pure and Applied Chemistry (IUPAC) and to balance carbon and nitrogen. We examined the impact of these updates on the GEOS-Chem version 14.0.1 simulation. Notable changes include 11 updates to reactions of reactive nitrogen species, resulting in a 7% net increase in the stratospheric NOx (NO + NO2) burden; an updated CO + OH rate formula leading to a 2.7% reduction in total tropospheric CO; adjustments to the rate coefficient and branching ratios of propane + OH, leading to reduced tropospheric propane (-17%) and increased acetone (+3.5%) burdens; a 41% increase in the tropospheric burden of peroxyacetic acid due to a decrease in the rate coefficient for its reaction with OH, further contributing to reductions in peroxyacetyl nitrate (PAN; -3.8%) and acetic acid (-3.4%); and a number of minor adjustments to halogen radical cycling. Changes to the global tropospheric burdens of other species include -0.7% for ozone, +0.3% for OH (-0.4% for methane lifetime against oxidation by tropospheric OH), +0.8% for formaldehyde, and -1.7% for NOx. The updated mechanism reflects the current state of the science, including complex chemical dependencies of key atmospheric species on temperature, pressure, and concentrations of other compounds. The improved conservation of carbon and nitrogen will facilitate future studies of their overall atmospheric budgets.

Impact of particulate nitrate photolysis on air quality over the Northern Hemisphere.

We use the Community Multiscale Air Quality (CMAQv5.4) model to examine the potential impact of particulate nitrate (pNO3-) photolysis on air quality over the Northern Hemisphere. We estimate the photolysis frequency of pNO3- by scaling the photolysis frequency of nitric acid (HNO3) with an enhancement factor that varies between 10 and 100 depending on pNO3- and sea-salt aerosol concentrations and then perform CMAQ simulations without and with pNO3- photolysis to quantify the range of impacts on tropospheric composition. The photolysis of pNO3- produces gaseous nitrous acid (HONO) and nitrogen dioxide (NO2) over seawater thereby increasing atmospheric HONO and NO2 mixing ratios. HONO subsequently undergoes photolysis, producing hydroxyl radicals (OH). The increase in NO2 and OH alters atmospheric chemistry and enhances the atmospheric ozone (O3) mixing ratio over seawater, which is subsequently transported to downwind continental regions. Seasonal mean model O3 vertical column densities without pNO3- photolysis are lower than the Ozone Monitoring Instrument (OMI) retrievals, while the column densities with the pNO3- photolysis agree better with the OMI retrievals of tropospheric O3 burden. We compare model O3 mixing ratios with available surface observed data from the U.S., Japan, the Tropospheric Ozone Assessment Report - Phase II, and OpenAQ; and find that the model without pNO3- photolysis underestimates the observed data in winter and spring seasons and the model with pNO3- photolysis improves the comparison in both seasons, largely rectifying the pronounced underestimation in spring. Compared to measurements from the western U.S., model O3 mixing ratios with pNO3- photolysis agree better with observed data in all months due to the persistent underestimation of O3 without pNO3- photolysis. Compared to the ozonesonde measurements, model O3 mixing ratios with pNO3- photolysis also agree better with observed data than the model O3 without pNO3- photolysis.

Public Health Benefits From Improved Identification of Severe Air Pollution Events With Geostationary Satellite Data.

Despite improvements in ambient air quality in the US in recent decades, many people still experience unhealthy levels of pollution. At present, national-level alert-day identification relies predominately on surface monitor networks and forecasters. Satellite-based estimates of surface air quality have rapidly advanced and have the capability to inform exposure-reducing actions to protect public health. At present, we lack a robust framework to quantify public health benefits of these advances in applications of satellite-based atmospheric composition data. Here, we assess possible health benefits of using geostationary satellite data, over polar orbiting satellite data, for identifying particulate air quality alert days (24hr PM2.5 > 35 µg m-3) in 2020. We find the more extensive spatiotemporal coverage of geostationary satellite data leads to a 60% increase in identification of person-alerts (alert days × population) in 2020 over polar-orbiting satellite data. We apply pre-existing estimates of PM2.5 exposure reduction by individual behavior modification and find these additional person-alerts may lead to 1,200 (800-1,500) or 54% more averted PM2.5-attributable premature deaths per year, if geostationary, instead of polar orbiting, satellite data alone are used to identify alert days. These health benefits have an associated economic value of 13 (8.8-17) billion dollars ($2019) per year. Our results highlight one of many potential applications of atmospheric composition data from geostationary satellites for improving public health. Identifying these applications has important implications for guiding use of current satellite data and planning future geostationary satellite missions.

The Social Cost of Ozone-Related Mortality Impacts From Methane Emissions.

Atmospheric methane directly affects surface temperatures and indirectly affects ozone, impacting human welfare, the economy, and environment. The social cost of methane (SC-CH4) metric estimates the costs associated with an additional marginal metric ton of emissions. Current SC-CH4 estimates do not consider the indirect impacts associated with ozone production from changes in methane. We use global model simulations and a new BenMAP webtool to estimate respiratory-related deaths associated with increases in ozone from a pulse of methane emissions in 2020. By using an approach consistent with the current SC-CH4 framework, we monetize and discount annual damages back to present day values. We estimate that the methane-ozone mechanism is attributable to 760 (95% CI: 330-1200) respiratory-related deaths per million metric tons of methane globally, for a global net present damage of $1800/mT (95% CI: $760-$2800/Mt CH4; 2% Ramsey discount rate); this would double the current SC-CH4 if included. These physical impacts are consistent with recent studies, but comparing direct costs is challenging. Economic damages are sensitive to uncertainties in the exposure and health risks associated with tropospheric ozone, assumptions about future projections of NOx emissions, socioeconomic conditions, and mortality rates, monetization parameters, and other factors. Our estimates are highly sensitive to uncertainties in ozone health risks. We also develop a reduced form model to test sensitivities to other parameters. The reduced form tool runs with a user-supplied emissions pulse, as well as socioeconomic and precursor projections, enabling future integration of the methane-ozone mechanism into the SC-CH4 modeling framework.

Ethnoracial Disparities in Nitrogen Dioxide Pollution in the United States: Comparing Data Sets from Satellites, Models, and Monitors.

In the United States (U.S.), studies on nitrogen dioxide (NO2) trends and pollution-attributable health effects have historically used measurements from in situ monitors, which have limited geographical coverage and leave 66% of urban areas unmonitored. Novel tools, including remotely sensed NO2 measurements and estimates of NO2 estimates from land-use regression and photochemical models, can aid in assessing NO2 exposure gradients, leveraging their complete spatial coverage. Using these data sets, we find that Black, Hispanic, Asian, and multiracial populations experience NO2 levels 15-50% higher than the national average in 2019, whereas the non-Hispanic White population is consistently exposed to levels that are 5-15% lower than the national average. By contrast, the in situ monitoring network indicates more moderate ethnoracial NO2 disparities and different rankings of the least- to most-exposed ethnoracial population subgroup. Validating these spatially complete data sets against in situ observations reveals similar performance, indicating that all these data sets can be used to understand spatial variations in NO2. Integrating in situ monitoring, satellite data, statistical models, and photochemical models can provide a semiobservational record, complete geospatial coverage, and increasingly high spatial resolution, enhancing future efforts to characterize, map, and track exposure and inequality for highly spatially heterogeneous pollutants like NO2.

Characterizing variations in ambient PM2.5 concentrations at the U.S. Embassy in Dhaka, Bangladesh using observations and the CMAQ modeling system.

We analyze hourly PM2.5 (particles with an aerodynamic diameter of ≤ 2.5 µm) concentrations measured at the U.S. Embassy in Dhaka over the 2016 - 2021 time period and find that concentrations are seasonally dependent with the highest occurring in winter and the lowest in monsoon seasons. Mean winter PM2.5 concentrations reached ~165-175 µg/m3 while monsoon concentrations remained ~30-35 µg/m3. Annual mean PM2.5 concentration reached ~5-6 times greater than the Bangladesh annual PM2.5 standard of 15 µg/m3. The number of days exceeding the daily PM2.5 standard of 65 µg/m3 in a year approached nearly 50%. Daily-mean PM2.5 concentrations remained elevated (>65 µg/m3) for more than 80 consecutive days. Night-time concentrations were greater than daytime concentrations. The comparison of results obtained from the Community Multiscale Air Quality (CMAQ) model simulations over the Northern Hemisphere using 108-km horizontal grids with observed data suggests that the model can reproduce the seasonal variation of observed data but underpredicts observed PM2.5 in winter months with a normalized mean bias of 13-32%. In the model, organic aerosol is the largest component of PM2.5, of which secondary organic aerosol plays a dominant role. Transboundary pollution has a large impact on the PM2.5 concentration in Dhaka, with an annual mean contribution of ~40 µg/m3.

Source-Receptor Relationships Between Precursor Emissions and O3 and PM2.5 Air Pollution Impacts.

Reduced complexity tools that provide a representation of both primarily emitted particulate matter with an aerodynamic diameter less than 2.5 µm (PM2.5), secondarily formed PM2.5, and ozone (O3) allow for a quick assessment of many iterations of pollution control scenarios. Here, a new reduced complexity tool, Pattern Constructed Air Pollution Surfaces (PCAPS), that estimates annual average PM2.5 and seasonal average maximum daily average 8 h (MDA8) O3 for any source location in the United States is described and evaluated. Typically, reduced complexity tools are not evaluated for skill in predicting change in air pollution by comparison with more sophisticated modeling systems. Here, PCAPS was compared against multiple types of emission control scenarios predicted with state-of-the-science photochemical grid models to provide confidence that the model is realistically capturing the change in air pollution due to changing emissions. PCAPS was also applied with all anthropogenic emissions sources for multiple retrospective years to predict PM2.5 chemical components for comparison against routine surface measurements. PCAPS predicted similar magnitudes and regional variations in spatial gradients of measured chemical components of PM2.5. Model performance for capturing ambient measurements was consistent with other reduced complexity tools. PCAPS also did well at capturing the magnitude and spatial features of changes predicted by photochemical transport models for multiple emissions scenarios for both O3 and PM2.5. PCAPS is a flexible tool that provides source-receptor relationships using patterns of air quality gradients from a training data set of generic modeled sources to create interpolated air pollution gradients for new locations not part of the training database. The flexibility provided for both sources and receptors makes this tool ideal for integration into larger frameworks that provide emissions changes and need estimates of air quality to inform downstream analytics, which often includes an estimate of monetized health effects.

Examining the impact of dimethyl sulfide emissions on atmospheric sulfate over the continental U.S.

We examine the impact of dimethylsulfide (DMS) emissions on sulfate concentrations over the continental U.S. by using the Community Multiscale Air Quality (CMAQ) model version 5.4 and performing annual simulations without and with DMS emissions for 2018. DMS emissions enhance sulfate not only over seawater but also over land, although to a lesser extent. On an annual basis, the inclusion of DMS emissions increase sulfate concentrations by 36% over seawater and 9% over land. The largest impacts over land occur in California, Oregon, Washington, and Florida, where the annual mean sulfate concentrations increase by ~25%. The increase in sulfate causes a decrease in nitrate concentration due to limited ammonia concentration especially over seawater and an increase in ammonium concentration with a net effect of increased inorganic particles. The largest sulfate enhancement occurs near the surface (over seawater) and the enhancement decreases with altitude, diminishing to 10-20% at an altitude of ~5 km. Seasonally, the largest enhancement of sulfate over seawater occurs in summer, and the lowest in winter. In contrast, the largest enhancements over land occur in spring and fall due to higher wind speeds that can transport more sulfate from seawater into land.

2002-2017 anthropogenic emissions data for air quality modeling over the United States.

The United States Environmental Protection Agency (US EPA) has developed a set of annual North American emissions data for multiple air pollutants across 18 broad source categories for 2002 through 2017. The sixteen new annual emissions inventories were developed using consistent input data and methods across all years. When a consistent method or tool was not available for a source category, emissions were estimated by scaling data from the EPA's 2017 National Emissions Inventory with scaling factors based on activity data and/or emissions control information. The emissions datasets are designed to support regional air quality modeling for a wide variety of human health and ecological applications. The data were developed to support simulations of the EPA's Community Multiscale Air Quality model but can also be used by other regional scale air quality models. The emissions data are one component of EPA's Air Quality Time Series Project which also includes air quality modeling inputs (meteorology, initial conditions, boundary conditions) and outputs (e.g., ozone, PM2.5 and constituent species, wet and dry deposition) for the Conterminous US at a 12 km horizontal grid spacing.

How have Divergent Global Emission Trends Influenced Long-range Transported Ozone to North America?

Several locations across the United States in non-compliance with the national standard for ground-level ozone (O3) are thought to have sizeable influences from distant extra-regional emission sources or natural stratospheric O3, which complicates design of local emission control measures. To quantify the amount of long-range transported O3 (LRT O3), its origin, and change over time, we conduct and analyze detailed sensitivity calculations characterizing the response of O3 to emissions from different source regions across the Northern Hemisphere in conjunction with multi-decadal simulations of tropospheric O3 distributions and changes. Model calculations show that the amount of O3 at any location attributable to sources outside North America varies both spatially and seasonally. On a seasonal-mean basis, during 1990-2010, LRT O3 attributable to international sources steadily increased by 0.06-0.2 ppb yr-1 at locations across the United States and arose from superposition of unequal and contrasting trends in individual source-region contributions, which help inform attribution of the trend evident in O3 measurements. Contributions of emissions from Europe steadily declined through 2010, while those from Asian emissions increased and remained dominant. Steadily rising NOx emissions from international shipping resulted in increasing contributions to LRT O3, comparable to those from Asian emissions in recent years. Central American emissions contribute a significant fraction of LRT O3 in southwestern United States. In addition to the LRT O3 attributable to emissions outside of North America, background O3 across the continental United States is comprised of a sizeable and spatially variable fraction that is of stratospheric origin (29-78%).

Changes in Ozone Chemical Sensitivity in the United States from 2007 to 2016.

Anthropogenic nitrogen oxide (NOx) and volatile organic compound (VOC) emissions in the U.S. have declined substantially over the last decade, altering the NOx-VOC chemistry and ozone (O3) production characteristics of many areas. In this work we use multiple air quality analysis tools to assess how these large reductions in NOx and VOC have affected O3 production regimes across the U.S. between 2007 and 2016. We first compare observed and modeled evolution of NOx-limited and NOx-saturated O3 formation regimes using a day-of-week (DOW) analysis. This comparison builds confidence in the model's ability to qualitatively capture O3 changes due to chemistry and meteorology both within years and across periods of large emissions decreases. DOW analysis, however, cannot definitively differentiate between emissions and meteorology impacts. We therefore supplement this analysis with sensitivity calculations from CAMx-HDDM to characterize modeled shifts in O3 formation chemistry between 2007 and 2016 in different regions of the U.S. We also conduct a more detailed investigation of the O3 chemical behavior observed in Chicago and Detroit, two complex urban areas in the Midwest. Both the ambient and modeling data show that more locations across the U.S. have shifted towards NOx-limited regimes between 2007 and 2016. The model-based HDDM sensitivity analysis shows only a few locations remaining NOx-saturated on high-O3 days in 2016 including portions of New York City, Chicago, Minneapolis, San Francisco and Los Angeles. This work offers insights into the current state of O3 production chemistry in large population centers across the U.S., as well as how O3 chemistry in these areas may evolve in the future.

Wet nitrogen (N) deposition to urban Latin America: filling in the gaps with GEOS-Chem.

In Latin America, atmospheric deposition is a major vector of nitrogen (N) input to urban systems. Yet, measurements of N deposition are sparse, precluding analysis of spatial patterns, temporal trends, and ecosystem impacts. Chemical transport models can be used to fill these gaps in the absence of dense measurements. Here, we evaluate the performance of a global 3-D chemical transport model in simulating spatial and interannual variation in wet inorganic N (NH4-N + NO3-N) deposition across urban areas in Latin America. Monthly wet and dry inorganic N deposition to Latin America were simulated for the period 2006-2010 using the GEOS-Chem Chemical Transport Model. Published estimates of observed wet or bulk inorganic N deposition measured between 2006-2010 were compiled for 16 urban areas and then compared with model output from GEOS-Chem. Observed mean annual inorganic N deposition to the urban study sites ranged from 5.7-14.2 kg ha-1 yr-1, with NH4-N comprising 48-90% of the total. Results show that simulated N deposition was highly correlated with observed N deposition across sites (R2 = 0.83, NMB = -50%). However, GEOS-Chem generally underestimated N deposition to urban areas in Latin America compared to observations. Underestimation due to bulk sampler dry deposition artifacts was considered and improved bias without improving correlation. In contrast to spatial variation, the model did not capture year-to-year variation well. Discrepancies between modeled and observed values exist, in part, because of uncertainties in Latin American N emissions inventories. Our findings indicate that even at coarse spatial resolution, GEOS-Chem can be used to simulate N deposition to urban Latin America, improving understanding of regional deposition patterns and potential ecological effects.

Global Emissions of Hydrogen Chloride and Particulate Chloride from Continental Sources.

Gaseous and particulate chlorine species play an important role in modulating tropospheric oxidation capacity, aerosol water uptake, visibility degradation, and human health. The lack of recent global continental chlorine emissions has hindered modeling studies of the role of chlorine in the atmosphere. Here, we develop a comprehensive global emission inventory of gaseous HCl and particulate Cl- (pCl), including 35 sources categorized in six source sectors based on published up-to-date activity data and emission factors. These emissions are gridded at a spatial resolution of 0.1° × 0.1° for the years 1960 to 2014. The estimated emissions of HCl and pCl in 2014 are 2354 (1661-3201) and 2321 (930-3264) Gg Cl a-1, respectively. Emissions of HCl are mostly from open waste burning (38%), open biomass burning (19%), energy (19%), and residential (13%) sectors, and the major sources classified by fuel type are combustion of waste (43%), biomass (32%), and coal (25%). Emissions of pCl are mostly from biofuel (29%) and open biomass burning processes (44%). The sectoral and spatial distributions of HCl and pCl emissions are very heterogeneous along the study period, and the temporal trends are mainly driven by the changes in emission factors, energy intensity, economy, and population.

Nowcasting Applications of Geostationary Satellite Hourly Surface PM2.5 Data.

The mass concentration of fine particulate matter (PM2.5; diameters less than 2.5 µm) estimated from geostationary satellite aerosol optical depth (AOD) data can supplement the network of ground monitors with high temporal (hourly) resolution. Estimates of PM2.5 over the United States (US) were derived from NOAA's operational geostationary satellites Advanced Baseline Imager (ABI) AOD data using a geographically weighted regression with hourly and daily temporal resolution. Validation versus ground observations shows a mean bias of -21.4% and -15.3% for hourly and daily PM2.5 estimates, respectively, for concentrations ranging from 0 to 1000 µg/m3. Because satellites only observe AOD in the daytime, the relation between observed daytime PM2.5 and daily mean PM2.5 was evaluated using ground measurements; PM2.5 estimated from ABI AODs were also examined to study this relationship. The ground measurements show that daytime mean PM2.5 has good correlation (r > 0.8) with daily mean PM2.5 in most areas of the US, but with pronounced differences in the western US due to temporal variations caused by wildfire smoke; the relation between the daytime and daily PM2.5 estimated from the ABI AODs has a similar pattern. While daily or daytime estimated PM2.5 provides exposure information in the context of the PM2.5 standard (> 35 µg/m3), the hourly estimates of PM2.5 used in Nowcasting show promise for alerts and warnings of harmful air quality. The geostationary satellite based PM2.5 estimates inform the public of harmful air quality ten times more than standard ground observations (1.8 vs. 0.17 million people per hour).

Improving Estimates of PM2.5 Concentration and Chemical Composition by Application of High Spectral Resolution Lidar (HSRL) and Creating Aerosol Types from Chemistry (CATCH) Algorithm.

Improved characterization of ambient PM2.5 mass concentration and chemical speciation is a topic of interest in air quality and climate sciences. Over the past decades, considerable efforts have been made to improve ground-level PM2.5 using remotely sensed data. Here we present two new approaches for estimating atmospheric PM2.5 and chemical composition based on the High Spectral Resolution Lidar (HSRL)-retrieved aerosol extinction values and types and Creating Aerosol Types from Chemistry (CATCH)-derived aerosol chemical composition. The first methodology (CMAQ-HSRL-CH) improves EPA's Community Multiscale Air Quality (CMAQ) predictions by applying variable scaling factors derived using remotely-sensed information about aerosol vertical distribution and types and the CATCH algorithm. The second methodology (HSRL-CH) does not require regional model runs and can provide atmospheric PM2.5 mass concentration and chemical speciation using only the remotely sensed data and the CATCH algorithm. The resulting PM2.5 concentrations and chemical speciation derived for NASA DISCOVER-AQ (Deriving Information on Surface Conditions from COlumn and VERtically Resolved Observations Relevant to Air Quality) Baltimore-Washington, D.C. Corridor (BWC) Campaign (2011) are compared to surface measurements from EPA's Air Quality Systems (AQS) network. The analysis shows that the CMAQ-HSRL-CH method leads to considerable improvement of CMAQ's predicted PM2.5 concentrations (R2 value increased from 0.37 to 0.63, the root mean square error (RMSE) was reduced from 11.9 to 7.2 µg m-3, and the normalized mean bias (NMB) was lowered from -46.0 to 4.6%). The HSRL-CH method showed statistics (R2=0.75, RMSE=8.6 µgm-3, and NMB=24.0%), which were better than the CMAQ prediction of PM2.5 alone and analogous to CMAQ-HSRL-CH. In addition to mass concentration, HSRL-CH can also provide aerosol chemical composition without specific model simulations. We expect that the HSRL-CH method will be able to make reliable estimates of PM2.5 concentration and chemical composition where HSRL data are available.

Satellite Formaldehyde to Support Model Evaluation.

Formaldehyde (HCHO), a known carcinogen classified as a hazardous pollutant by the United States Environmental Protection Agency (U.S. EPA), is measured through monitoring networks across the U.S. Since these data are limited in spatial and temporal extent, model simulations from the U.S. EPA Community Multiscale Air Quality (CMAQ) model are used to estimate ambient HCHO exposure for the EPA National Air Toxics Assessment (NATA). Here, we employ satellite HCHO retrievals from the Ozone Monitoring Instrument (OMI)-the NASA retrieval developed by the Smithsonian Astrophysical Observatory (SAO), and the European Union Quality Assurance for Essential Climate Variables (QA4ECV) retrieval-to evaluate three CMAQ configurations, spanning the summers of 2011 and 2016, with differing biogenic emissions inputs and chemical mechanisms. These CMAQ configurations capture the general spatial and temporal behavior of both satellite retrievals, but underestimate column HCHO, particularly in the western U.S. In the southeastern U.S., the comparison with OMI HCHO highlights differences in modeled meteorology and biogenic emissions even with differences in satellite retrievals. All CMAQ configurations show low daily correlations with OMI HCHO (r = 0.26 - 0.38), however, we find higher monthly correlations (r = 0.52 - 0.73), and the models correlate best with the OMI-QA4ECV product. Compared to surface observations, we find improved agreement over a 24-hour period compared to afternoon-only, suggesting daily HCHO amounts are captured with more accuracy than afternoon amounts. This work highlights the potential for synergistic improvements in modeling and satellite retrievals to support near-surface HCHO estimates for the NATA and other applications.

Evaluation of 15 years of modeled atmospheric oxidized nitrogen compounds across the contiguous United States.

Atmospheric nitrogen oxide and nitrogen dioxide (NO + NO2, together termed as NO X ) estimates from annual photochemical simulations for years 2002-2016 are compared to surface network measurements of NO X and total gas-phase-oxidized reactive nitrogen (NO Y ) to evaluate the Community Multiscale Air Quality (CMAQ) modeling system performance by U.S. region, season, and time of day. In addition, aircraft measurements from 2011 Deriving Information on Surface Conditions from Column and Vertically Resolved Observations Relevant to Air Quality are used to evaluate how emissions, chemical mechanism, and measurement uncertainty each contribute to the overall model performance. We show distinct seasonal and time-of-day patterns in NO X performance. Summertime NO X is overpredicted with bimodal peaks in bias during early morning and evening hours and persisting overnight. The summertime morning NO X bias dropped from between 28% and 57% for earlier years (2002-2012) to between -2% and 7% for later years (2013-2016). Summer daytime NO X tends to be unbiased or underpredicted. In winter, the evening NO X overpredictions remain, but NO X is unbiased or underpredicted overnight, in the morning, and during the day. NO X overpredictions are most pronounced in the Midwestern and Southern United States with Western regions having more of a tendency toward model underpredictions of NO X . Modeled NO X performance has improved substantially over time, reflecting updates to the emission inputs and the CMAQ air quality model. Model performance improvements are largest for years simulated with CMAQv5.1 or later and for emission inventory years 2014 and later, coinciding with reduced onroad NO X emissions from vehicles with newer emission control technologies and improved treatment of chemistry, deposition, and vertical mixing in CMAQ. Our findings suggest that emissions temporalization of specific mobile source sectors have a small impact on model performance, while chemistry updates improve predictions of NO Y but do not improve summertime NO X bias in the Baltimore/DC area. Sensitivity runs performed for different locations across the country suggest that the improvement in summer NO X performance can be attributed to updates in vertical mixing incorporated in CMAQv5.1.

Estimating US Background Ozone Using Data Fusion.

US background (US-B) ozone (O3) is the O3 that would be present in the absence of US anthropogenic (US-A) emissions. US-B O3 varies by location and season and can make up a large, sometimes dominant, portion of total O3. Typically, US-B O3 is quantified using a chemical transport model (CTM) though results are uncertain due to potential errors in model process descriptions and inputs, and there are significant differences in various model estimates of US-B O3. We develop and apply a method to fuse observed O3 with US-B O3 simulated by a regional CTM (CMAQ). We apportion the model bias as a function of space and time to US-B and US-A O3. Trends in O3 bias are explored across different simulation years and varying model scales. We found that the CTM US-B O3 estimate was typically biased low in spring and high in fall across years (2016-2017) and model scales. US-A O3 was biased high on average, with bias increasing for coarser resolution simulations. With the application of our data fusion bias adjustment method, we estimate a 28% improvement in the agreement of adjusted US-B O3. Across the four estimates, we found annual mean CTM-simulated US-B O3 ranging from 30 to 37 ppb with the spring mean ranging from 32 to 39 ppb. After applying the bias adjustment, we found annual mean US-B O3 ranging from 32 to 33 ppb with the spring mean ranging from 37 to 39 ppb.

Impact of dimethylsulfide chemistry on air quality over the Northern Hemisphere.

We implement oceanic dimethylsulfide (DMS) emissions and its atmospheric chemical reactions into the Community Multiscale Air Quality (CMAQv53) model and perform annual simulations without and with DMS chemistry to quantify its impact on tropospheric composition and air quality over the Northern Hemisphere. DMS chemistry enhances both sulfur dioxide (SO2) and sulfate ( S O 4 2 - ) over seawater and coastal areas. It enhances annual mean surface SO2 concentration by +46 pptv and S O 4 2 - by +0.33 µg/m3 and decreases aerosol nitrate concentration by -0.07 µg/m3 over seawater compared to the simulation without DMS chemistry. The changes decrease with altitude and are limited to the lower atmosphere. Impacts of DMS chemistry on S O 4 2 - are largest in the summer and lowest in the fall due to the seasonality of DMS emissions, atmospheric photochemistry and resultant oxidant levels. Hydroxyl and nitrate radical-initiated pathways oxidize 75% of the DMS while halogen-initiated pathways oxidize 25%. DMS chemistry leads to more acidic particles over seawater by decreasing aerosol pH. Increased S O 4 2 - from DMS enhances atmospheric extinction while lower aerosol nitrate reduces the extinction so that the net effect of DMS chemistry on visibility tends to remain unchanged over most of the seawater.

Incorporation of Remote PM2.5 Concentrations into the Downscaler Model for Spatially Fused Air Quality Surfaces.

The United States Environmental Protection Agency (EPA) has implemented a Bayesian spatial data fusion model called the Downscaler (DS) model to generate daily air quality surfaces for PM2.5 across the contiguous U.S. Previous implementations of DS relied on monitoring data from EPA's Air Quality System (AQS) network, which is largely concentrated in urban areas. In this work, we introduce to the DS modeling framework an additional PM2.5 input dataset from the Interagency Monitoring of Protected Visual Environments (IMPROVE) network located mainly in remote sites. In the western U.S. where IMPROVE sites are relatively dense (compared to the eastern U.S.), the inclusion of IMPROVE PM2.5 data to the DS model runs reduces predicted annual averages and 98th percentile concentrations by as much as 1.0 and 4 µg m-3, respectively. Some urban areas in the western U.S., such as Denver, Colorado, had moderate increases in the predicted annual average concentrations, which led to a sharpening of the gradient between urban and remote areas. Comparison of observed and DS-predicted concentrations for the grid cells containing IMPROVE and AQS sites revealed consistent improvement at the IMPROVE sites but some degradation at the AQS sites. Cross-validation results of common site-days withheld in both simulations show a slight reduction in the mean bias but a slight increase in the mean square error when the IMPROVE data is included. These results indicate that the output of the DS model (and presumably other Bayesian data fusion models) is sensitive to the addition of geographically distinct input data, and that the application of such models should consider the prediction domain (national or urban focused) when deciding to include new input data.