Influence of Proteins and Building Direction on the Corrosion and Tribocorrosion of CoCrMo Fabricated by Laser Powder Bed Fusion.

Cobalt-chromium-molybdenum (CoCrMo) alloys are common wear-exposed biomedical alloys and are manufactured in multiple ways, increasingly using additive manufacturing processes such as laser powder bed fusion (LPBF). Here, we investigate the effect of proteins and the manufacturing process (wrought vs LPBF) and building orientation (LPBF-XY and XZ) on the corrosion, metal release, tribocorrosion, and surface oxide composition by means of electrochemical, mechanical, microscopic, diffractive, and spectroscopic methods. The study was conducted at pH 7.3 in 5 g/L NaCl and 5 mM 2-(N-morpholino) ethanesulfonic acid (MES) buffer, which was found to be necessary to avoid metal phosphate and metal-protein aggregate precipitation. The effect of 10 g/L bovine serum albumin (BSA) and 2.5 g/L fibrinogen (Fbn) was studied. BSA and Fbn strongly enhanced the release of Co, Cr, and Mo and slightly enhanced the corrosion (still in the passive domain) for all CoCrMo alloys and most for LPBF-XZ, followed by LPBF-XY and the wrought CoCrMo. BSA and Fbn, most pronounced when combined, significantly decreased the coefficient of friction due to lubrication, the wear track width and severity of the wear mechanism, and the tribocorrosion for all alloys, with no clear effect of the manufacturing type. The wear track area was significantly more oxidized than the area outside of the wear track. In the reference solution without proteins, a strong Mo oxidation in the wear track surface oxide was indicative of a pH decrease and cell separation of the anodic and cathodic areas. This effect was absent in the presence of the proteins.

Correlating Live Cell Viability with Membrane Permeability Disruption Induced by Trivalent Chromium.

Cr(III) is often regarded as a trace essential micronutrient that can be found in many dietary supplements due to its participation in blood glucose regulation. However, increased levels of exposure have been linked to adverse health effects in living organisms. Herein, scanning electrochemical microscopy (SECM) was used to detect variation in membrane permeability of single cells (T24) resulting from exposure to a trivalent Cr-salt, CrCl3. By employing electrochemical mediators, ferrocenemethanol (FcMeOH) and ferrocenecarboxylic acid (FcCOO-), initially semipermeable and impermeable, respectively, complementary information was obtained. Three-dimensional COMSOL finite element analysis simulations were successfully used to quantify the permeability coefficients of each mediator by matching experimental and simulated results. Depending on the concentration of Cr(III) administered, three regions of membrane response were detected. Following exposure to low concentrations (up to 500 µM Cr(III)), their permeability coefficients were comparable to that of control cells, 80 µm/s for FcMeOH and 0 µm/s for FcCOO-. This was confirmed for both mediators. As the incubation concentrations were increased, the ability of FcMeOH to permeate the membrane decreased to a minimum of 17 µm/s at 7500 µM Cr(III), while FcCOO- remained impermeable. At the highest examined concentrations, both mediators were found to demonstrate increased membrane permeability. 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide cell viability studies were also conducted on Cr(III)-treated T24 cells to correlate the SECM findings with the toxicity effects of the metal. The viability experiments revealed a similar concentration-dependent trend to the SECM cell membrane permeability study.

Mapping Cd²âº-induced membrane permeability changes of single live cells by means of scanning electrochemical microscopy.

Scanning Electrochemical Microscopy (SECM) is a powerful, non-invasive, analytical methodology that can be used to investigate live cell membrane permeability. Depth scan SECM imaging allowed for the generation of 2D current maps of live cells relative to electrode position in the x-z or y-z plane. Depending on resolution, one depth scan image can contain hundreds of probe approach curves (PACs). Individual PACs were obtained by simply extracting vertical cross-sections from the 2D image. These experimental PACs were overlaid onto theoretically generated PACs simulated at specific geometry conditions. Simulations were carried out using 3D models in COMSOL Multiphysics to determine the cell membrane permeability coefficients at different locations on the surface of the cells. Common in literature, theoretical PACs are generated using a 2D axially symmetric geometry. This saves on both compute time and memory utilization. However, due to symmetry limitations of the model, only one experimental PAC right above the cell can be matched with simulated PAC data. Full 3D models in this article were developed for the SECM system of live cells, allowing all experimental PACs over the entire cell to become usable. Cd(2+)-induced membrane permeability changes of single human bladder (T24) cells were investigated at several positions above the cell, displaced from the central axis. The experimental T24 cells under study were incubated with Cd(2+) in varying concentrations. It is experimentally observed that 50 and 100 µM Cd(2+) caused a decrease in membrane permeability, which was uniform across all locations over the cell regardless of Cd(2+) concentration. The Cd(2+) was found to have detrimental effects on the cell, with cells shrinking in size and volume, and the membrane permeability decreasing. A mapping technique for the analysis of the cell membrane permeability under the Cd(2+) stress is realized by the methodology presented.

Tracking live cell response to cadmium (II) concentrations by scanning electrochemical microscopy.

The biological chemistry of toxic heavy metals, such as Cd (II), has become an active area of research due to connections with increased oxidative stress, cytotoxicity, and human/animal carcinogenicity. In this study, scanning electrochemical microscopy (SECM) was used as a noninvasive technique to monitor membrane permeability of single live human bladder cancer cells (T24) subjected to exposure of Cd (II) at various concentrations. The addition of a membrane permeable redox mediator, ferrocenemethanol (FcMeOH), in combination with depth scan imaging provided probe approach curves (PACs) to reveal changes in membrane homeostasis. To demonstrate the strength of SECM as a bioanalytical technique for cell physiology and pathology, we tested responses of live cells after 1h incubations with various concentrations of Cd (II). For the first time, a trend in membrane permeability of Cd (II) treated live T24 cells was discovered. Dependent on the incubation concentration, the trend displayed an initial decrease in membrane permeability coefficient from 75µm/s for control cells to 25µm/s for cells incubated with 75µM Cd (II). This was followed by an eventual return to the permeability coefficient of control cells (75µm/s) with further increases in Cd (II) exposure. The cells were found to respond at as little as 10µM Cd (II) concentrations. This work further demonstrates the use of SECM as a bioanalytical technique to monitor cell physiology and topography. A greater insight into the complex mechanisms behind Cd (II) toxicity is anticipated.