ABSTRACT
The rechargeable lithium-sulfur (Li-S) battery is an attractive platform for high-energy, low-cost electrochemical energy storage. Practical Li-S cells are limited by several fundamental issues, including the low conductivity of sulfur and its reduction compounds with Li and the dissolution of long-chain lithium polysulfides (LiPS) into the electrolyte. We report on an approach that allows high-performance sulfur-carbon cathodes to be designed based on tethering polyethylenimine (PEI) polymers bearing large numbers of amine groups in every molecular unit to hydroxyl- and carboxyl-functionalized multiwall carbon nanotubes. Significantly, for the first time we show by means of direct dissolution kinetics measurements that the incorporation of CNT-PEI hybrids in a sulfur cathode stabilizes the cathode by both kinetic and thermodynamic processes. Composite sulfur cathodes based the CNT-PEI hybrids display high capacity at both low and high current rates, with capacity retention rates exceeding 90%. The attractive electrochemical performance of the materials is shown by means of DFT calculations and physical analysis to originate from three principal sources: (i) specific and strong interaction between sulfur species and amine groups in PEI; (ii) an interconnected conductive CNT substrate; and (iii) the combination of physical and thermal sequestration of LiPS provided by the CNT=PEI composite.
ABSTRACT
Sulfur/polyacrylonitrile composites provide a promising route toward cathode materials that overcome multiple, stubborn technical barriers to high-energy, rechargeable lithium-sulfur (Li-S) cells. Using a facile thermal synthesis procedure in which sulfur and polyacrylonitrile (PAN) are the only reactants, we create a family of sulfur/PAN (SPAN) nanocomposites in which sulfur is maintained as S3/S2 during all stages of the redox process. By entrapping these smaller molecular sulfur species in the cathode through covalent bonding to and physical confinement in a conductive host, these materials are shown to completely eliminate polysulfide dissolution and shuttling between lithium anode and sulfur cathode. We also show that, in the absence of any of the usual salt additives required to stabilize the anode in traditional Li-S cells, Li-SPAN cells cycle trouble free and at high Coulombic efficiencies in simple carbonate electrolytes. Electrochemical and spectroscopic analysis of the SPAN cathodes at various stages of charge and discharge further show a full and reversible reduction and oxidation between elemental sulfur and Li-ions in the electrolyte to produce Li2S as the only discharge product over hundreds of cycles of charge and discharge at fixed current densities.
ABSTRACT
The success of the rechargeable Li-S cell is limited in part by the dissolution of lithium-polysulfide in the electrolyte. Remarkably, it is found that removal of the conventional membrane separator in a Li-S cell improves sulfur utilization and cycling performance, whether the sulfur is initially contained in the cathode or electrolyte. An optimized cell design yields discharge capacities as high as 980 mA h g-1 after 100 cycles.
