The role of mass spectrometry and related techniques in the analysis of extractable and leachable chemicals.

In addition to degradation products, impurities, and exogenous contaminants, industries such as pharmaceutical, food, and others must concern themselves with leachables. These chemicals can derive from containers and closures or migrate from labels or secondary containers and packaging to make their way into products. Identification and quantification of extractables (potential leachables) and leachables, typically trace level analytes, is a regulatory expectation intended to ensure consumer safety and product fidelity. Mass spectrometry and related techniques have played a significant role in the analysis of extractables and leachables (E&L). This review provides an overview of how mass spectrometry is used for E&L studies, primarily in the context of the pharmaceutical industry. This review includes work flows, examples of how identification and quantification is done, and the importance of orthogonal data from several different detectors. E&L analyses are driven by the need for consumer safety. These studies are expected to expand in existing areas (e.g., food, textiles, toys, etc.) and into new, currently unregulated product areas. Thus, this topic is of interest to audiences beyond just the pharmaceutical and health care industries. Finally, the potential of universal detector approaches used in other areas is suggested as an opportunity to drive E&L research progress in this arguably understudied, under-published realm.

Susceptibility-matched plugs for microcoil NMR probes.

For mass-limited samples, the residual sample volume outside the detection coil is an important concern, as is good base line resolution. Here, we present the construction and evaluation of magnetic susceptibility-matched plugs for microcoil NMR sample cells which address these issues. Mixed-epoxy glue and ultem tube plugs that have susceptibility values close to those of perfluorocarbon FC-43 (fluorinert) and copper were used in small volume (0.5-2 microL) and larger volume (15-20 microL) thin glass capillary sample cells. Using these plugs, the sample volume efficiency (i.e. ratio of active volume to total sample volume in the microcoil NMR cell) was improved by 6-12-fold without sensitivity and resolution trade-offs. Comparison with laser etched or heat etched microcoil sample cells is provided. The approaches described are potentially useful in metabolomics for biomarkers detection in mass limited biological samples.

New Solenoidal Microcoil NMR Probe Using Zero-Susceptibility Wire.

We present the construction and performance of a 20-µL active volume probe that utilizes zero-susceptibility wire for the detection transceiver coil and a 3.5 mm outer diameter thin-wall bubble flow cell to contain the sample. The probe shows good rf homogeneity, resolution, line shape and sensitivity. The sensitivity and resolution of the 20-µL probe was compared to those for several other coil configurations, including smaller detection volumes, a thin wire copper coil immersed in susceptibility matching perfluorocarbon FC-43 (fluorinert) fluid, and a standard 5 mm probe. In particular, the (1)H mass sensitivity, S(m) (SNR per micromole), was 3-4 fold higher than that for the standard 5 mm probe. Finally, the use of the zero-susceptibility wire in smaller volume probes is discussed along with potential future improvements and applications.

Design and construction of a versatile dual volume heteronuclear double resonance microcoil NMR probe.

Improved NMR detection of mass limited samples can be obtained by taking advantage of the mass sensitivity of microcoil NMR, while throughput issues can be addressed using multiple, parallel sample detection coils. We present the design and construction of a double resonance 300-MHz dual volume microcoil NMR probe with thermally etched 440-nL detection volumes and fused silica transfer lines for high-throughput stopped-flow or flow-through sample analysis. Two orthogonal solenoidal detection coils and the novel use of shielded inductors allowed the construction of a probe with negligible radio-frequency cross talk. The probe was resonated at (1)H-(2)D (upper coil) and (1)H-(13)C (lower coil) frequencies such that it could perform 1D and 2D experiments with active locking frequency. The coils exhibited line widths of 0.8-1.1 Hz with good mass sensitivity for both (1)H and (13)C NMR detection. (13)C-directly detected (2)D HETCOR spectra of 5% v/v (13)C labeled acetic acid were obtained in less than 5 min. Demonstration of the probe characteristics as well as applications of the versatile two-coil double resonance probe are discussed.

Saturation transfer double-difference NMR spectroscopy using a dual solenoid microcoil difference probe.

An experiment designed to collect a saturation transfer double difference (STDD) NMR spectrum using a solenoid microcoil NMR difference probe is reported. STDD-NMR allows the investigation of ligand-biomolecule binding, with moderate concentration requirements for unlabeled molecular targets and the ability to discern binding events in the presence of non-binding ligands. The NMR difference probe acquires the signals from two different samples at once, and cancels common signals automatically through a mechanism of switching between parallel excitation and serial acquisition of the sample signals. STDD spectra were acquired on a system consisting of human serum albumin and two ligands, octanoic acid and glucose. The non-binding ligand, glucose, was cancelled internally through phase cycling, while the protein signal was subtracted automatically by the difference probe. The proton NMR resonance signal from octanoic acid remained in the double difference spectrum. This work demonstrates that the double difference can be performed both internally and automatically through the utilization of the solenoid microcoil NMR difference probe and STDD-NMR pulse sequence, resulting in a clean signal from the binding ligand with good protein background subtraction and an overall favorable result when compared to the conventional approach.