Platelet packing density is an independent regulator of the hemostatic response to injury.

Essentials Platelet packing density in a hemostatic plug limits molecular movement to diffusion. A diffusion-dependent steep thrombin gradient forms radiating outwards from the injury site. Clot retraction affects the steepness of the gradient by increasing platelet packing density. Together, these effects promote hemostatic plug core formation and inhibit unnecessary growth. SUMMARY: Background Hemostasis studies performed in vivo have shown that hemostatic plugs formed after penetrating injuries are characterized by a core of highly activated, densely packed platelets near the injury site, covered by a shell of less activated and loosely packed platelets. Thrombin production occurs near the injury site, further activating platelets and starting the process of platelet mass retraction. Tightening of interplatelet gaps may then prevent the escape and exchange of solutes. Objectives To reconstruct the hemostatic plug macro- and micro-architecture and examine how platelet mass contraction regulates solute transport and solute concentration in the gaps between platelets. Methods Our approach consisted of three parts. First, platelet aggregates formed in vitro under flow were analyzed using scanning electron microscopy to extract data on porosity and gap size distribution. Second, a three-dimensional (3-D) model was constructed with features matching the platelet aggregates formed in vitro. Finally, the 3-D model was integrated with volume and morphology measurements of hemostatic plugs formed in vivo to determine how solutes move within the platelet plug microenvironment. Results The results show that the hemostatic mass is characterized by extremely narrow gaps, porosity values even smaller than previously estimated and stagnant plasma velocity. Importantly, the concentration of a chemical species released within the platelet mass increases as the gaps between platelets shrink. Conclusions Platelet mass retraction provides a physical mechanism to establish steep chemical concentration gradients that determine the extent of platelet activation and account for the core-and-shell architecture observed in vivo.

Soluble fibrin causes an acquired platelet glycoprotein VI signaling defect: implications for coagulopathy.

Essentials Collagen and thrombin when used simultaneously generate highly activated platelets. The effect of thrombin stimulation on subsequent glycoprotein VI (GPVI) function was observed. Soluble fibrin, but not protease activated receptor (PAR) activation, prevented GPVI activation. Circulating soluble fibrin in coagulopathic blood may cause an acquired GPVI signaling defect. SUMMARY: Background In coagulopathic blood, circulating thrombin may drive platelet dysfunction. Methods/Results Using calcium dye-loaded platelets, the effect of thrombin exposure and soluble fibrin generation on subsequent platelet GPVI function was investigated. Exposure of apixaban-treated platelet-rich plasma (12% PRP) to thrombin (1-10 nm), but not ADP or thromboxane mimetic U46619 exposure, dramatically blocked subsequent GPVI activation by convulxin, collagen-related peptide or fibrillar collagen. Consistent with soluble fibrin multimerizing and binding GPVI, the onset of convulxin insensitivity required 200-500 s of thrombin exposure, was not mimicked by exposure to PAR-1/4 activating peptides, was not observed with washed platelets, and was blocked by fibrin polymerization inhibitor (GPRP) or factor XIIIa inhibitor (T101). PAR-1 signaling through Gαq was not required because vorapaxar blocked thrombin-induced calcium mobilization but had no effect on the ability of thrombin to impair GPVI-signaling. Convulxin insensitivity was unaffected by the metalloprotease inhibitor GM6001 or the αIIb ß3 antagonist GR144053, indicating negligible roles for GPVI shedding or αIIb ß3 binding of fibrin. Thrombin treatment of washed platelets resuspended in purified fibrinogen also produced convulxin insensitivity that was prevented by GPRP. Exposure of apixaban/PPACK-treated whole blood to thrombin-treated fibrinogen resulted in > 50% decrease in platelet deposition in a collagen microfluidic assay that required soluble fibrin assembly. Conclusions Conversion of only 1% plasma fibrinogen in coagulopathic blood would generate 90 nm soluble fibrin, far exceeding ~1 nmGPVI in blood. Soluble fibrin, rather than thrombin-induced platelet activation throuh PAR-1 and PAR-4, downregulated GPVI-signaling in response to stimuli, and may lead to subsequent hypofunction of endogenous or transfused platelets.

Pathological von Willebrand factor fibers resist tissue plasminogen activator and ADAMTS13 while promoting the contact pathway and shear-induced platelet activation.

BACKGROUND: Under severe stenotic conditions, von Willebrand factor (VWF) multimerizes into large insoluble fibers at pathological shear rates. OBJECTIVE: Evaluate the mechanics and biology of VWF fibers without the confounding effects of endothelium or collagen. METHODS: Within a micropost-impingement microfluidic device, > 100-µm long VWF fibers multimerized on the post within 10 min using EDTA-treated platelet-free plasma (PFP) perfused at wall shear rates > 5000 s(-1) . RESULTS: von Willebrand factor fiber thickness increased to > 10 µm as a result of increasing the shear rate to 10,000 s(-1) . In a stress-strain test, fibrous VWF had an elastic modulus of ~50 MPa. The insoluble VWF fibers were non-amyloid because they rapidly dissolved in trypsin, plasmin or 2% SDS, but were resistant to 50 nm ADAMTS13 or 100 nm tissue plasminogen activator in plasma. Following fiber formation, perfusion of low corn trypsin inhibitor (CTI)-treated (4 µg mL(-1) ), recalcified citrated plasma at 1500 s(-1) caused fibrin formation on the VWF fibers, a result not observed with purified type 1 collagen or a naked micropost. During VWF fiber formation, contact pathway factors accumulated on VWF because the use of EDTA/D-Phe-Pro-Arg chloromethylketone (PPACK)/apixaban/high CTI-treated PFP during VWF fiber formation prevented the subsequent fibrin production from low-CTI, recalcified citrated PFP. VWF fibers displayed FXIIa-immunostaining. When PPACK-inhibited whole blood was perfused over VWF fibers, platelets rolled and arrested on the surface of VWF, but only displayed P-selectin if prevailing shear rates were pathological. Platelet arrest on VWF fibers was blocked with αIIb ß3 antagonist GR144053. CONCLUSIONS: We report VWF fiber-contact pathway crosstalk and mechanisms of thrombolytic resistance in hemodynamic settings of myocardial infarction.