Informing the Exposure Landscape: The Fate of Microplastics in a Large Pelagic In-Lake Mesocosm Experiment.

Understanding microplastic exposure and effects is critical to understanding risk. Here, we used large, in-lake closed-bottom mesocosms to investigate exposure and effects on pelagic freshwater ecosystems. This article provides details about the experimental design and results on the transport of microplastics and exposure to pelagic organisms. Our experiment included three polymers of microplastics (PE, PS, and PET) ranging in density and size. Nominal concentrations ranged from 0 to 29,240 microplastics per liter on a log scale. Mesocosms enclosed natural microbial, phytoplankton, and zooplankton communities and yellow perch (Perca flavescens). We quantified and characterized microplastics in the water column and in components of the food web (biofilm on the walls, zooplankton, and fish). The microplastics in the water stratified vertically according to size and density. After 10 weeks, about 1% of the microplastics added were in the water column, 0.4% attached to biofilm on the walls, 0.01% within zooplankton, and 0.0001% in fish. Visual observations suggest the remaining >98% were in a surface slick and on the bottom. Our study suggests organisms that feed at the surface and in the benthos are likely most at risk, and demonstrates the value of measuring exposure and transport to inform experimental designs and achieve target concentrations in different matrices within toxicity tests.

Microplastics in marine mammal blubber, melon, & other tissues: Evidence of translocation.

Marine mammals consume large quantities of microplastic particles, likely via trophic transfer (i.e., through prey who have consumed plastic) and direct consumption from seawater or sediment. Microplastics have been found in the stomachs, gastro-intestinal tracts, and feces of cetaceans and pinnipeds. Translocation of ingested microplastics has been documented in other organs of several aquatic species, but has not been examined in marine mammals. Marine mammals have highly specialized lipid-rich tissues which may increase susceptibility to lipophilic microplastics. Here we demonstrate the occurrence of microplastics, ranging in size, mass concentration, and particle count concentration from 24.4 µm - 1387 µm, 0.59 µg/g - 25.20 µg/g, and 0.04 - 0.39 particles/g, respectively, in four tissues (acoustic fat pad, blubber, lung, & melon) from twelve marine mammal species inclusive of mysticetes, odontocetes, and phocids. Twenty-two individuals were examined for microplastics using a combination of Raman spectroscopy and pyrolysis gas chromatography with mass spectrometry. Overall, 68% of individuals had at least one microplastic particle in at least one of the four tissue types, with the most common polymer and shape observed being polyethylene and fibers, respectively. These findings suggest some proportion of ingested microplastics translocate throughout marine mammal bodies posing an exposure risk to both marine mammals and people. For people, exposure could be directly through consumption for those who rely on marine mammals as food and indirectly to peoples globally who consume the same prey resources as marine mammals. Some individuals examined represent samples obtained over two decades ago, suggesting that this process, and thus exposure risk, has occurred for some time.

Development and application of a health-based framework for informing regulatory action in relation to exposure of microplastic particles in California drinking water.

Microplastics have been documented in drinking water, but their effects on human health from ingestion, or the concentrations at which those effects begin to manifest, are not established. Here, we report on the outcome of a virtual expert workshop conducted between October 2020 and October 2021 in which a comprehensive review of mammalian hazard studies was conducted. A key objective of this assessment was to evaluate the feasibility and confidence in deriving a human health-based threshold value to inform development of the State of California's monitoring and management strategy for microplastics in drinking water. A tiered approach was adopted to evaluate the quality and reliability of studies identified from a review of the peer-reviewed scientific literature. A total of 41 in vitro and 31 in vivo studies using mammals were identified and subjected to a Tier 1 screening and prioritization exercise, which was based on an evaluation of how each of the studies addressed various quality criteria. Prioritized studies were identified largely based on their application and reporting of dose-response relationships. Given that methods for extrapolating between in vitro and in vivo systems are currently lacking, only oral exposure in vivo studies were identified as fit-for-purpose within the context of this workshop. Twelve mammalian toxicity studies were prioritized and subjected to a Tier 2 qualitative evaluation by external experts. Of the 12 studies, 7 report adverse effects on male and female reproductive systems, while 5 reported effects on various other physiological endpoints. It is notable that the majority of studies (83%) subjected to Tier 2 evaluation report results from exposure to a single polymer type (polystyrene spheres), representing a size range of 0.040 to 20 µm. No single study met all desired quality criteria, but collectively toxicological effects with respect to biomarkers of inflammation and oxidative stress represented a consistent trend. While it was possible to derive a conservative screening level to inform monitoring activities, it was not possible to extrapolate a human-health-based threshold value for microplastics, which is largely due to concerns regarding the relative quality and reliability of current data, but also due to the inability to extrapolate data from studies using monodisperse plastic particles, such as polystyrene spheres to an environmentally relevant exposure of microplastics. Nevertheless, a conservative screening level value was used to estimate a volume of drinking water (1000 L) that could be used to support monitoring activities and improve our overall understanding of exposure in California's drinking water. In order to increase confidence in our ability to derive a human-health-based threshold value in the future, several research recommendations are provided, with an emphasis towards strengthening how toxicity studies should be conducted in the future and an improved understanding of human exposure to microplastics, insights critically important to better inform future risk assessments. Supplementary Information: The online version contains supplementary material available at 10.1186/s43591-022-00030-6.

Conventional and biological treatment for the removal of microplastics from drinking water.

This study examines the removal of microplastics and other anthropogenic particles (>10 µm) from surface water by a full-scale conventional drinking water treatment plant. The treatment process is composed of coagulation with aluminum hydroxide, flocculation, anthracite-sand filtration, and chlorination. Samples were also collected from pilot-scale biological filters consisting of anthracite-sand or granular activated carbon (GAC) media operated with or without pre-ozonation and at a range of different empty-bed contact times (EBCTs). Particles in 10 L water samples collected in duplicate using a fully enclosed sampling apparatus were separated using sieves with 500 µm, 300 µm, 125 µm, and 45 µm openings followed by filtration through 10 µm polycarbonate filters. Particles were counted using stereomicroscopy and characterized using µ-Raman spectroscopy. Full-scale conventional treatment removed 52 % of anthropogenic particles when comparing raw (42 ± 18 particles/L) and finished water (20 ± 8 particles/L). Coagulation, flocculation, and sedimentation accounted for the highest removal (70 %) of any individual unit process. Overall removal was reduced to 52 %, the difference being attributed to airborne particle deposition that occurred while water was detained in a clearwell (exposed to atmosphere via ventilation) that was used to achieve the required contact time for disinfection. The majority of the particles (>80 %) were identified as fibers 10-45 µm; microplastics were predominantly composed of polyester while the non-plastic anthropogenic particles were primarily cellulose. None of the pilot filter configurations examined resulted in significantly fewer microplastics when compared to full-scale conventional filtration. This study illustrates that the removal efficiency of conventional treatment may be limited when considering microfibers <45 µm in size.

Microwave-Assisted Extraction for Quantification of Microplastics Using Pyrolysis-Gas Chromatography/Mass Spectrometry.

Microplastics are now recognized as a persistent and global pollutant. To quantitively measure microplastics in environmental matrices, several techniques are used including new methods using pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS). In the present study, a new extraction method using microwave-assisted extraction (MAE) combined with Py-GC/MS was developed to extract and quantify a wide range of plastic polymers, and the method was validated using different environmental matrices. This new extraction method was able to extract polyethylene, polystyrene, polypropylene, poly(methyl-methacrylate) (PMMA), polyvinylchloride (PVC), and polycarbonate in dichloromethane with good recoveries (92.9-119.7%). The limit of detection and limit of quantification (LOQ) of the method ranged from 0.002 to 0.18 µg and from 1.2 to 5.8 µg, respectively. Intra- and interday repeatability values with coefficients of variation less than 25% for all polymers were obtained. Method validation also included a spike and recovery using all polymers from clean water, dirty water, and shrimp and salmon fillet samples, with recoveries of 85 to 111, 87 to 138, 81 to 122, and 50 to 151%, respectively. Finally, the method was tested on unspiked wild mussels and bottled water for proof-of-concept. Both polyethylene and PVC were detected and quantified in mussels, and polycarbonate and polypropylene were detected below the LOQ. For bottled water, polypropylene, polystyrene, and polycarbonate were all detected below the LOQ. We introduce a method combining MAE and Py-GC/MS as a tool for mass quantification of microplastics. This method can be used as a stand-alone, or as a complementary method to spectroscopic techniques. Environ Toxicol Chem 2021;40:2733-2741. © 2021 SETAC.

Isolation and Extraction of Microplastics from Environmental Samples: An Evaluation of Practical Approaches and Recommendations for Further Harmonization.

Researchers have been identifying microplastics in environmental samples dating back to the 1970s. Today, microplastics are a recognized environmental pollutant attracting a large amount of public and government attention, and in the last few years the number of scientific publications has grown exponentially. An underlying theme within this research field is to achieve a consensus for adopting a set of appropriate procedures to accurately identify and quantify microplastics within diverse matrices. These methods should then be harmonized to produce quantifiable data that is reproducible and comparable around the world. In addition, clear and concise guidelines for standard analytical protocols should be made available to researchers. In keeping with the theme of this special issue, the goals of this focal point review are to provide researchers with an overview of approaches to isolate and extract microplastics from different matrices, highlight associated methodological constraints and the necessary steps for conducting procedural controls and quality assurance. Simple samples, including water and sediments with low organic content, can be filtered and sieved. Stepwise procedures require density separation or digestion before filtration. Finally, complex matrices require more extensive steps with both digestion and density adjustments to assist plastic isolation. Implementing appropriate methods with a harmonized approach from sample collection to data analysis will allow comparisons across the research community.

An Irgafos® 168 story: When the ubiquity of an additive prevents studying its leaching from plastics.

Plastic pollution is a source of chemical to the environment and wildlife. Despite the ubiquity of plastic pollution and thus plastic additive in the environment, plastic additives have been studied to a limited extend. As a prerequisite to a study aiming to evaluate the leaching of a common additive used as an antioxidant (Irgafos® 168) from polyethylene microparticles, an inventory of the potential background contamination of the laboratory workplace was done. In this study, Irgafos® 168 (tris(2,4-ditert-butylphenyl) phosphite) and its oxidized form (tris (2,4-ditert-butylphenyl) phosphate) were quantified in different laboratory reagents, including the plastic packaging and the powders, using Pyrolysis-GC/MS. At least one form of Irgafos® 168 was detected in all tested laboratory reagents with higher concentrations in caps and bottles as compared to the powders. Additionally, oxidized Irgafos® 168 was also found in the reverse osmosed and deionized water container used in the laboratory. The same profile of contamination, i.e. higher concentration of the oxidized form and higher concentrations in acidic reagents, was observed when comparing the reagent and their respective containers suggesting that the additive is leaching from the container into the powder. Overall, this study demonstrates that the antioxidant additive Irgafos® 168 is ubiquitous in the laboratory workplace. Plastic additives such as Irgafos® 168 can therefore largely interfere and biased ecotoxicological and toxicological studies especially using environmentally relevant concentrations of microplastics. The source, fate and effects of plastic additive from plastic debris should be carefully considered in future studies that require setting up methods to overcome these contaminations.

Reporting Guidelines to Increase the Reproducibility and Comparability of Research on Microplastics.

The ubiquitous pollution of the environment with microplastics, a diverse suite of contaminants, is of growing concern for science and currently receives considerable public, political, and academic attention. The potential impact of microplastics in the environment has prompted a great deal of research in recent years. Many diverse methods have been developed to answer different questions about microplastic pollution, from sources, transport, and fate in the environment, and about effects on humans and wildlife. These methods are often insufficiently described, making studies neither comparable nor reproducible. The proliferation of new microplastic investigations and cross-study syntheses to answer larger scale questions are hampered. This diverse group of 23 researchers think these issues can begin to be overcome through the adoption of a set of reporting guidelines. This collaboration was created using an open science framework that we detail for future use. Here, we suggest harmonized reporting guidelines for microplastic studies in environmental and laboratory settings through all steps of a typical study, including best practices for reporting materials, quality assurance/quality control, data, field sampling, sample preparation, microplastic identification, microplastic categorization, microplastic quantification, and considerations for toxicology studies. We developed three easy to use documents, a detailed document, a checklist, and a mind map, that can be used to reference the reporting guidelines quickly. We intend that these reporting guidelines support the annotation, dissemination, interpretation, reviewing, and synthesis of microplastic research. Through open access licensing (CC BY 4.0), these documents aim to increase the validity, reproducibility, and comparability of studies in this field for the benefit of the global community.

Towards Raman Automation for Microplastics: Developing Strategies for Particle Adhesion and Filter Subsampling.

Automation and subsampling have been proposed as solutions to reduce the time required to quantify and characterize microplastics in samples using spectroscopy. However, there are methodological dilemmas associated with automation that are preventing its widespread implementation including ensuring particles stay adhered to the filter during filter mapping and developing an appropriate subsampling strategy to reduce the time needed for analysis. We provide a solution to the particle adherence issue by applying Skin Tac, a non-polymeric permeable adhesive that allows microplastic particles to adhere to the filter without having their Raman signal masked by the adhesive. We also explore different subsampling strategies to help inform how to take a representative subsample. Based on the particle distributions observed on filters, we determined that assuming a homogenous particle distribution is inappropriate and can lead to over- and under-estimations of extrapolated particle counts. Instead, we provide recommendations for future studies that wish to subsample to increase the throughput of samples for spectroscopic analysis.

Occurrence and identification of microplastics in beach sediments from the Hauts-de-France region.

The present work was carried out to quantify microplastics (MP) from three sandy beaches along the Côte d'Opale coastline located in the Hauts-de-France region of northern France. Three different study sites located along the English Channel were investigated due to different levels of anthropopression and hydrodynamic conditions. Sediments were collected at three different tide lines: high tide line (HTL), middle of the intertidal zone (IZ), and low tide line (LTL), to investigate the effects of tide line on microplastic contamination. Particles and fibers were counted and colors were recorded; polymer identification was then performed using pyrolysis-gas chromatography-mass spectrometry (Py-GC/MS). Particle and fiber abundances ranged from 23.4 ± 18.9 to 69.3 ± 30.6 items kg-1 dry weight sediment, with a trend towards fiber predominance, were observed. No difference in particle and fiber abundance was found between the different beaches and tide lines, except for Boulogne-sur-Mer, where the particle number was significantly different between tide lines. Major polymers identified were polyethylene (36.6%) and polypropylene (10.7%). This citizen science project provided preliminary data about the abundance and polymeric nature of MP along the Côte d'Opale coastline.

Microplastic contamination and pollutant levels in mussels and cockles collected along the channel coasts.

Nowadays, environmental pollution by microplastics (<5 mm; MP) is a major issue. MP are contaminating marine organisms consumed by humans. This work studied MP contamination in two bivalve species of commercial interest: blue mussel (Mytilus edulis) and common cockle (Cerastoderma edule) sampled on the Channel coastlines (France). In parallel, 13 plastic additives and 27 hydrophobic organic compounds (HOC) were quantified in bivalves flesh using SBSE-TD-GS-MS/MS to explore a possible relationship between their concentrations and MP contamination levels. MP were extracted using a 10% potassium hydroxide digestion method then identified by µ-Raman spectroscopy. The proportion of contaminated bivalves by MP ranged from 34 to 58%. Blue mussels and common cockles exhibited 0.76 ±â€¯0.40 and 2.46 ±â€¯1.16 MP/individual and between 0.15 ±â€¯0.06 and 0.74 ±â€¯0.35 MP/g of tissue wet weight. Some HOC and plastic additives were detected in bivalves. However, no significant Pearson or Spearman correlation was found between MP loads and plastic additives or HOC concentrations in bivalve tissues for the two species.

Optimization, performance, and application of a pyrolysis-GC/MS method for the identification of microplastics.

Plastics are found to be major debris composing marine litter; microplastics (MP, < 5 mm) are found in all marine compartments. The amount of MPs tends to increase with decreasing size leading to a potential misidentification when only visual identification is performed. These last years, pyrolysis coupled with gas chromatography/mass spectrometry (Py-GC/MS) has been used to get information on the composition of polymers with some applications on MP identification. The purpose of this work was to optimize and then validate a Py-GC/MS method, determine limit of detection (LOD) for eight common polymers, and apply this method on environmental MP. Optimization on multiple GC parameters was carried out using polyethylene (PE) and polystyrene (PS) microspheres. The optimized Py-GC/MS method require a pyrolysis temperature of 700 °C, a split ratio of 5 and 300 °C as injector temperature. Performance assessment was accomplished by performing repeatability and intermediate precision tests and calculating limit of detection (LOD) for common polymers. LODs were all below 1 µg. For performance assessment, identification remains accurate despite a decrease in signal over time. A comparison between identifications performed with Raman micro spectroscopy and with Py-GC/MS was assessed. Finally, the optimized method was applied to environmental samples, including plastics isolated from sea water surface, beach sediments, and organisms collected in the marine environment. The present method is complementary to µ-Raman spectroscopy as Py-GC/MS identified pigment containing particles as plastic. Moreover, some fibers and all particles from sediment and sea surface were identified as plastic. Graphical abstract ᅟ.

Occurrence and effects of plastic additives on marine environments and organisms: A review.

Plastics debris, especially microplastics, have been found worldwide in all marine compartments. Much research has been carried out on adsorbed pollutants on plastic pieces and hydrophobic organic compounds (HOC) associated with microplastics. However, only a few studies have focused on plastic additives. These chemicals are incorporated into plastics from which they can leach out as most of them are not chemically bound. As a consequence of plastic accumulation and fragmentation in oceans, plastic additives could represent an increasing ecotoxicological risk for marine organisms. The present work reviewed the main class of plastic additives identified in the literature, their occurrence in the marine environment, as well as their effects on and transfers to marine organisms. This work identified polybrominated diphenyl ethers (PBDE), phthalates, nonylphenols (NP), bisphenol A (BPA) and antioxidants as the most common plastic additives found in marine environments. Moreover, transfer of these plastic additives to marine organisms has been demonstrated both in laboratory and field studies. Upcoming research focusing on the toxicity of microplastics should include these plastic additives as potential hazards for marine organisms, and a greater focus on the transport and fate of plastic additives is now required considering that these chemicals may easily leach out from plastics.

Microplastics in seafood: Benchmark protocol for their extraction and characterization.

Pollution of the oceans by microplastics (<5 mm) represents a major environmental problem. To date, a limited number of studies have investigated the level of contamination of marine organisms collected in situ. For extraction and characterization of microplastics in biological samples, the crucial step is the identification of solvent(s) or chemical(s) that efficiently dissolve organic matter without degrading plastic polymers for their identification in a time and cost effective way. Most published papers, as well as OSPAR recommendations for the development of a common monitoring protocol for plastic particles in fish and shellfish at the European level, use protocols containing nitric acid to digest the biological tissues, despite reports of polyamide degradation with this chemical. In the present study, six existing approaches were tested and their effects were compared on up to 15 different plastic polymers, as well as their efficiency in digesting biological matrices. Plastic integrity was evaluated through microscopic inspection, weighing, pyrolysis coupled with gas chromatography and mass spectrometry, and Raman spectrometry before and after digestion. Tissues from mussels, crabs and fish were digested before being filtered on glass fibre filters. Digestion efficiency was evaluated through microscopical inspection of the filters and determination of the relative removal of organic matter content after digestion. Five out of the six tested protocols led to significant degradation of plastic particles and/or insufficient tissue digestion. The protocol using a KOH 10% solution and incubation at 60 °C during a 24 h period led to an efficient digestion of biological tissues with no significant degradation on all tested polymers, except for cellulose acetate. This protocol appeared to be the best compromise for extraction and later identification of microplastics in biological samples and should be implemented in further monitoring studies to ensure relevance and comparison of environmental and seafood product quality studies.