Directional flow induced by synchronized longitudinal and zeta-potential controlling AC-electrical fields.

Electroosmotic flow (EOF) in a microchannel can be controlled by electronic control of the surface charge using an electrode embedded in the wall of the channel. By setting a voltage to the electrode, the zeta-potential at the wall can be changed locally. Thus, the electrode acts as a "gate" for liquid flow, in analogy with a gate in a field-effect transistor. In this paper we will show three aspects of a Field Effect Flow Control (FEFC) structure. We demonstrate the induction of directional flow by the synchronized switching of the gate potential with the channel axial potential. The advantage of this procedure is that potential gas formation by electrolysis at the electrodes that provide the axial electric field is suppressed at sufficiently large switching frequencies, while the direction and magnitude of the EOF can be maintained. Furthermore we will give an analysis of the time constants involved in the charging of the insulator, and thus the switching of the zeta potential, in order to predict the maximum operating frequency. For this purpose an equivalent electrical circuit is presented and analyzed. It is shown that in order to accurately describe the charging dynamics and pH dependency the traditionally used three capacitor model should be expanded with an element describing the buffer capacitance of the silica wall surface.

Strongly accelerated and humidity-independent drying of nanochannels induced by sharp corners.

Measurements are shown indicating that the drying rate of nanochannels can be enhanced by up to 3 orders of magnitude relative to drying by vapor diffusion, and that the drying rate is independent of the relative humidity of the environment up to a relative humidity of more than 90%. Micromachined Pyrex glass nanochannels of 72 nm height and with sharp corners (corner angles 7 degrees) were used. Available theory shows that the sharp corners function as a low-resistance pathway for liquid water, siphoning (wicking) the water to a location close to the channel exit before it evaporates. The described phenomena are of importance for the understanding of drying processes in industry and agriculture. The introduction of sharp corners or grooves can furthermore be beneficial for the functioning of microheat pipes and capillary-pumped loops.