Laccase-based catalytic microreactor for BPA biotransformation.

A laccase-based catalytic reactor was developed into a polydimethylsiloxane (PDMS) microfluidic device, allowing the degradation of different concentrations of the emergent pollutant, Bisphenol-A (BPA), at a rate similar to free enzyme. Among the immobilizing agents used, 1-Ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) was capable of immobilizing a more significant amount of the laccase enzyme in comparison to glutaraldehyde (GA), and the passive method (2989, 1537, and 1905 U/mL, respectively). The immobilized enzyme inside the microfluidic device could degrade 55 ppm of BPA at a reaction rate of 0.5309 U/mL*min with a contaminant initial concentration of 100 ppm at room temperature. In conclusion, the design of a microfluidic device and the immobilization of the laccase enzyme successfully allowed a high capacity of BPA degradation.

Urine biomarkers for Alzheimer's disease: A new opportunity for wastewater-based epidemiology?

While Alzheimer's disease (AD) diagnosis, management, and care have become priorities for healthcare providers and researcher's worldwide due to rapid population aging, epidemiologic surveillance efforts are currently limited by costly, invasive diagnostic procedures, particularly in low to middle income countries (LMIC). In recent years, wastewater-based epidemiology (WBE) has emerged as a promising tool for public health assessment through detection and quantification of specific biomarkers in wastewater, but applications for non-infectious diseases such as AD remain limited. This early review seeks to summarize AD-related biomarkers and urine and other peripheral biofluids and discuss their potential integration to WBE platforms to guide the first prospective efforts in the field. Promising results have been reported in clinical settings, indicating the potential of amyloid ß, tau, neural thread protein, long non-coding RNAs, oxidative stress markers and other dysregulated metabolites for AD diagnosis, but questions regarding their concentration and stability in wastewater and the correlation between clinical levels and sewage circulation must be addressed in future studies before comprehensive WBE systems can be developed.

Omicron and Delta variant prevalence detection and identification during the fourth COVID-19 wave in Mexico using wastewater-based epidemiology.

Objectives: To identify the SARS-CoV-2 variants Delta and Omicron during the fourth wave of the COVID-19 pandemic in Mexico using samples taken from 19 locations in 18 out of the 32 states. Methods: The genetic material concentration was done with PEG/NaCl precipitation, SARS-CoV-2 presence was confirmed by reverse transcriptase-quantitative polymerase chain reaction assay, the variant detection was carried out using a commercial mutation detection panel kit, and variant/mutation confirmation was done by amplicon sequencing of receptor-binding domain target region. The study used 41 samples. Results: The Delta variant was confirmed in two samples during August 2021 (Querétaro and CDMX) and in three samples during November 2021 (Aguascalientes, Ciudad Juárez campuses, and Nuevo Leon). In December 2021, another sample with the Delta variant was confirmed in Nuevo Leon. Between January to March 2022 only the presence of Omicron was confirmed, (variant BA.1). Additionally, in this period six samples were identified with the status "Variant Not Determined". Conclusion: To our knowledge, this study is one of the first to identify Omicron and Delta variants with polymerase chain reaction in Mexico and Latin America and its distribution across the country with 56% Mexican states making it a viable alternative for variant detection without conducting a large quantity of sequencing of clinical tests.

Assessing environmental health impacts of coal mining exploitation in Iran: A Rapid Impact Assessment Matrix (RIAM) approach for environmental protection.

Environmental Impact Assessment is the process of evaluating the effects caused by a project on the environment. The outcomes generated by this assessment can lead to a reduction of the negative effects and an increase in the positive effects caused by mine projects. The present study was conducted to evaluate the environmental impact assessment of the Goliran Coal Mine in northern Iran. In the descriptive-analytical study, to achieve the objectives, observatory surveys were conducted around the coal mine using a checklist, which was about the positive and negative effects of a coal mine. Then the data were entered into the RIAM and the positive and negative effects were ranked and the most important effects were determined. In RIAM, one point is assigned to each component. 17 important activities for environmental impacts were identified using a checklist. Among the activities carried out at the coal mine site, the major ones included tunnel excavation, construction of the rail line collection and disposal of coal mine effluent, coal transportation, collection and disposal of mine tailings, and technical defects and leakage. The scores of each environmental factor were based on the four environmental components: physical/chemical, biological/ecological, social/cultural, and economic/operational. The results of the present study showed that the most negatively affected environmental components are the physical/chemical components derived from three activities; the construction of the underground tunnel; the construction of a coal transport rail line; and the actual transportation of coal extracts. The scores of each environmental factor based on the four components at the Goliran coal mine in northern Iran indicate that the highest negative score was -64, corresponding to the physical/chemical component, and was assigned to air pollution. On the other hand, the highest positive score corresponds to the economic/operational component with +54, assigned to the income that employees earn from the mine. Overall results showed that the coal mine in northern Iran had negative effects on the environment but the effects were not severe. It is suggested that for future research, corrective measures should be taken in the form of an environmental management plan to reduce the negative effects caused by coal mining, and then prospective research should be done to check the extent of reducing the negative effects.

Emerging Applications of Nanobiosensors in Pathogen Detection in Water and Food.

Food and waterborne illnesses are still a major concern in health and food safety areas. Every year, almost 0.42 million and 2.2 million deaths related to food and waterborne illness are reported worldwide, respectively. In foodborne pathogens, bacteria such as Salmonella, Shiga-toxin producer Escherichia coli, Campylobacter, and Listeria monocytogenes are considered to be high-concern pathogens. High-concern waterborne pathogens are Vibrio cholerae, leptospirosis, Schistosoma mansoni, and Schistosima japonicum, among others. Despite the major efforts of food and water quality control to monitor the presence of these pathogens of concern in these kinds of sources, foodborne and waterborne illness occurrence is still high globally. For these reasons, the development of novel and faster pathogen-detection methods applicable to real-time surveillance strategies are required. Methods based on biosensor devices have emerged as novel tools for faster detection of food and water pathogens, in contrast to traditional methods that are usually time-consuming and are unsuitable for large-scale monitoring. Biosensor devices can be summarized as devices that use biochemical reactions with a biorecognition section (isolated enzymes, antibodies, tissues, genetic materials, or aptamers) to detect pathogens. In most cases, biosensors are based on the correlation of electrical, thermal, or optical signals in the presence of pathogen biomarkers. The application of nano and molecular technologies allows the identification of pathogens in a faster and high-sensibility manner, at extremely low-pathogen concentrations. In fact, the integration of gold, silver, iron, and magnetic nanoparticles (NP) in biosensors has demonstrated an improvement in their detection functionality. The present review summarizes the principal application of nanomaterials and biosensor-based devices for the detection of pathogens in food and water samples. Additionally, it highlights the improvement of biosensor devices through nanomaterials. Nanomaterials offer unique advantages for pathogen detection. The nanoscale and high specific surface area allows for more effective interaction with pathogenic agents, enhancing the sensitivity and selectivity of the biosensors. Finally, biosensors' capability to functionalize with specific molecules such as antibodies or nucleic acids facilitates the specific detection of the target pathogens.

New Perspective for Macroalgae-Based Animal Feeding in the Context of Challenging Sustainable Food Production.

Food production is facing challenging times due to the pandemic, and climate change. With production expected to double by 2050, there is a need for a new paradigm in sustainable animal feed supply. Seaweeds offer a highly valuable opportunity in this regard. Seaweeds are classified into three categories: brown (Phaeophyceae), red (Rhodophyceae), and green (Chlorophyceae). While they have traditionally been used in aquafeed, their demand in the feed market is growing, parallelly increasing according to the food demand. Additionally, seaweeds are being promoted for their nutritional benefits, which contribute to the health, growth, and performance of animals intended for human consumption. Moreover, seaweeds contain biologically active compounds such as polyunsaturated fatty acids, antioxidants (polyphenols), and pigments (chlorophylls and carotenoids), which possess beneficial properties, including antibacterial, antifungal, antiviral, antioxidant, and anti-inflammatory effects and act as prebiotics. This review offers a new perspective on the valorization of macroalgae biomass due to their nutritional profile and bioactive components, which have the potential to play a crucial role in animal growth and making possible new sources of healthy food ingredients.

Passive Sampler Technology for Viral Detection in Wastewater-Based Surveillance: Current State and Nanomaterial Opportunities.

Although wastewater-based surveillance (WBS) is an efficient community-wide surveillance tool, its implementation for pathogen surveillance remains limited by ineffective sample treatment procedures, as the complex composition of wastewater often interferes with biomarker recovery. Moreover, current sampling protocols based on grab samples are susceptible to fluctuant biomarker concentrations and may increase operative costs, often rendering such systems inaccessible to communities in low-to-middle-income countries (LMICs). As a response, passive samplers have emerged as a way to make wastewater sampling more efficient and obtain more reliable, consistent data. Therefore, this study aims to review recent developments in passive sampling technologies to provide researchers with the tools to develop novel passive sampling strategies. Although promising advances in the development of nanostructured passive samplers have been reported, optimization remains a significant area of opportunity for researchers in the area, as methods for flexible, robust adsorption and recovery of viral genetic materials would greatly improve the efficacy of WBS systems while making them more accessible for communities worldwide.

Microencapsulation of Gallic Acid Based on a Polymeric and pH-Sensitive Matrix of Pectin/Alginate.

The encapsulation of gallic acid (GA) through several methods has enhanced its shelf life and facilitated industrial applications. Polymeric matrices made of alginate and pectin were evaluated to encapsulate GA via spray drying. The pH-responsive release mechanism was monitored to validate the matrices' performances as wall materials and extend the bioactive compound stability. The microcapsules produced were characterized via scanning electron microscopy (SEM), dynamic light scattering (DLS), Fourier-transform infrared spectroscopy (FTIR), and cyclic voltammetry (CV). The retention and encapsulation efficiency ranges were 45-82% and 79-90%, respectively. The higher values were reached at 3 and 0.75% (w/v) pectin and sodium alginate, respectively. The scanning electron microscopy showed smooth spherical capsules and the average particle size ranged from 1327 to 1591 nm. Their performance and stability were evaluated with optimal results at a pH value of 7 throughout the investigation period. Therefore, this work demonstrated the suitability of gallic acid encapsulation via spray drying using pectin and alginate, which are biopolymers that can be obtained from circular economy processes starting from agro-industrial biomass. The developed formulations provide an alternative to protecting and controlling the release of GA, promoting its application in the food, pharmaceutical, and cosmetic industries and allowing for the release of compounds with high bioactive potential.

Polysaccharides from the Sargassum and Brown Algae Genus: Extraction, Purification, and Their Potential Therapeutic Applications.

Brown macroalgae represent one of the most proliferative groups of living organisms in aquatic environments. Due to their abundance, they often cause problems in aquatic and terrestrial ecosystems, resulting in health problems in humans and the death of various aquatic species. To resolve this, the application of Sargassum has been sought in different research areas, such as food, pharmaceuticals, and cosmetics, since Sargassum is an easy target for study and simple to obtain. In addition, its high content of biocompounds, such as polysaccharides, phenols, and amino acids, among others, has attracted attention. One of the valuable components of brown macroalgae is their polysaccharides, which present interesting bioactivities, such as antiviral, antimicrobial, and antitumoral, among others. There is a wide variety of methods of extraction currently used to obtain these polysaccharides, such as supercritical fluid extraction (SFE), pressurized liquid extraction (PLE), subcritical water extraction (SCWE), ultrasound-assisted extraction (UAE), enzyme-assisted extraction (EAE), and microwave-assisted extraction (MAE). Therefore, this work covers the most current information on the methods of extraction, as well as the purification used to obtain a polysaccharide from Sargassum that is able to be utilized as alginates, fucoidans, and laminarins. In addition, a compilation of bioactivities involving brown algae polysaccharides in in vivo and in vitro studies is also presented, along with challenges in the research and marketing of Sargassum-based products that are commercially available.

Environmental concerns and bioaccumulation of psychiatric drugs in water bodies - Conventional versus biocatalytic systems of mitigation.

The COVID-19 pandemic has brought increments in market sales and prescription of medicines commonly used to treat mental health disorders, such as depression, anxiety, stress, and related problems. The increasing use of these drugs, named psychiatric drugs, has led to their persistence in aquatic systems (bioaccumulation), since they are recalcitrant to conventional physical and chemical treatments typically used in wastewater treatment plants. An emerging environmental concern caused by the bioaccumulation of psychiatric drugs has been attributed to the potential ecological and toxicological risk that these medicines might have over human health, animals, and plants. Thus, by the application of biocatalysis-assisted techniques, it is possible to efficiently remove psychiatric drugs from water. Biocatalysis, is a widely employed and highly efficient process implemented in the biotransformation of a wide range of contaminants, since it has important differences in terms of catalytic behavior, compared to common treatment techniques, including photodegradation, Fenton, and thermal treatments, among others. Moreover, it is noticed the importance to monitor transformation products of degradation and biodegradation, since according to the applied removal technique, different toxic transformation products have been reported to appear after the application of physical and chemical procedures. In addition, this work deals with the discussion of differences existing between high- and low-income countries, according to their environmental regulations regarding waste management policies, especially waste of the drug industry.

Occurrence, transport, and detection techniques of emerging pollutants in groundwater.

Emerging pollutants (EPs) are a group of different contaminants, such as hormones, pesticides, heavy metals, and drugs, usually found in concentrations between the order of ng and µg per liter. The global population's daily city and agro-industrial activities release EPs into the environment.  Due to the chemical nature of EPs and deficient wastewater treatment and management, they are transported to superficial and groundwater through the natural water cycle, where they can potentially cause harmful effects on living organisms. Recent efforts have focused on developing technology that allows EPs quantification and monitoring in real-time and in situ. The newly developed technology aims to provide accessible groundwater management that detects and treats EPs while avoiding their contact with living beings and their toxic effects. This review presents some of the recently reported techniques that have been applied to advance the detection of EPs in groundwater and potential technologies that can be used for EP removal.

Insight into vaccination and meteorological factors on daily COVID-19 cases and mortality in Bangladesh.

The ongoing COVID-19 contagious disease caused by SARS-CoV-2 has disrupted global public health, businesses, and economies due to widespread infection, with 676.41 million confirmed cases and 6.77 million deaths in 231 countries as of February 07, 2023. To control the rapid spread of SARS-CoV-2, it is crucial to determine the potential determinants such as meteorological factors and their roles. This study examines how COVID-19 cases and deaths changed over time while assessing meteorological characteristics that could impact these disparities from the onset of the pandemic. We used data spanning two years across all eight administrative divisions, this is the first of its kind--showing a connection between meteorological conditions, vaccination, and COVID-19 incidences in Bangladesh. We further employed several techniques including Simple Exponential Smoothing (SES), Auto-Regressive Integrated Moving Average (ARIMA), Auto-Regressive Integrated Moving Average with explanatory variables (ARIMAX), and Automatic forecasting time-series model (Prophet). We further analyzed the effects of COVID-19 vaccination on daily cases and deaths. Data on COVID-19 cases collected include eight administrative divisions of Bangladesh spanning March 8, 2020, to January 31, 2023, from available online servers. The meteorological data include rainfall (mm), relative humidity (%), average temperature (°C), surface pressure (kPa), dew point (°C), and maximum wind speed (m/s). The observed wind speed and surface pressure show a significant negative impact on COVID-19 cases (-0.89, 95% confidence interval (CI): 1.62 to -0.21) and (-1.31, 95%CI: 2.32 to -0.29), respectively. Similarly, the observed wind speed and surface pressure show a significant negative impact on COVID-19 deaths (-0.87, 95% CI: 1.54 to -0.21) and (-3.11, 95%CI: 4.44 to -1.25), respectively. The impact of meteorological factors is almost similar when vaccination information is included in the model. However, the impact of vaccination in both cases and deaths model is significantly negative (for cases: 1.19, 95%CI: 2.35 to -0.38 and for deaths: 1.55, 95%CI: 2.88 to -0.43). Accordingly, vaccination effectively reduces the number of new COVID-19 cases and fatalities in Bangladesh. Thus, these results could assist future researchers and policymakers in the assessment of pandemics, by making thorough efforts that account for COVID-19 vaccinations and meteorological conditions.

Antioxidant Activity and GC-MS Profile of Cardamom (Elettaria cardamomum) Essential Oil Obtained by a Combined Extraction Method-Instant Controlled Pressure Drop Technology Coupled with Sonication.

Cardamom Essential oils are highly demanded because of their antimicrobial, anti-inflammatory, and antioxidant activities. Nonetheless, retrieving quality extracts quickly with efficient energy savings has been challenging. Therefore, green technologies are emerging as possible alternatives. Thus, this study evaluates the yield and quality of the instant controlled pressure drop (DIC) process coupled with ultrasound-assisted extraction (UAE) of cardamom essential oil (CEO). Likewise, the antioxidant activity, chemical profile of CEO, and microstructure of seeds were analyzed. This study analyzed 13 different treatments with varying saturated steam processing temperatures (SSPT), thermal processing times (TPT), and 1 control. The results showed that CEO yield increased significantly by DIC (140 °C and 30 s) and UAE compared to the control (22.53% vs. 15.6%). DIC 2 (165 °C, 30 s) showed the highest DPPH inhibition (79.48%) and the best Trolox equivalent antioxidant capacity (TEAC) by the control with 0.60 uMTE/g. The GC/MS analysis showed 28 volatile constituents, withα-Terpinyl acetate, geranyl oleate, and oleic acid being the most abundant. DIC (140 °C and 30 s) and UAE showed the best yield and chemical profile. The SEM microscopy of untreated seeds revealed collapsed structures before the oil cell layer, which reduced the extraction yield, contrary to DIC-treated seeds, with more porous structures. Therefore, combining innovative extraction methods could solve the drawbacks of traditional extraction methods.

Microalgae-Based Biotechnology as Alternative Biofertilizers for Soil Enhancement and Carbon Footprint Reduction: Advantages and Implications.

Due to the constant growth of the human population and anthropological activity, it has become necessary to use sustainable and affordable technologies that satisfy the current and future demand for agricultural products. Since the nutrients available to plants in the soil are limited and the need to increase the yields of the crops is desirable, the use of chemical (inorganic or NPK) fertilizers has been widespread over the last decades, causing a nutrient shortage due to their misuse and exploitation, and because of the uncontrolled use of these products, there has been a latent environmental and health problem globally. For this reason, green biotechnology based on the use of microalgae biomass is proposed as a sustainable alternative for development and use as soil improvers for crop cultivation and phytoremediation. This review explores the long-term risks of using chemical fertilizers for both human health (cancer and hypoxia) and the environment (eutrophication and erosion), as well as the potential of microalgae biomass to substitute current fertilizer using different treatments on the biomass and their application methods for the implementation on the soil; additionally, the biomass can be a source of carbon mitigation and wastewater treatment in agro-industrial processes.

Occurrence of Z-drugs, benzodiazepines, and ketamine in wastewater in the United States and Mexico during the Covid-19 pandemic.

Z-drugs, benzodiazepines and ketamine are classes of psychotropic drugs prescribed for treating anxiety, sleep disorders and depression with known side effects including an elevated risk of addiction and substance misuse. These drugs have a strong potential for misuse, which has escalated over the years and was hypothesized here to have been exacerbated during the COVID-19 pandemic. Wastewater-based epidemiology (WBE) constitutes a fast, easy, and relatively inexpensive approach to epidemiological surveys for understanding the incidence and frequency of uses of these drugs. In this study, we analyzed wastewater (n = 376) from 50 cities across the United States and Mexico from July to October 2020 to estimate drug use rates during a pandemic event. Both time and flow proportional composite and grab samples of untreated municipal wastewater were analyzed using solid-phase extraction followed by liquid chromatography-tandem mass spectrometry to determine loadings of alprazolam, clonazepam, diazepam, ketamine, lorazepam, nordiazepam, temazepam, zolpidem, and zaleplon in raw wastewater. Simultaneously, prescription data of the aforementioned drugs were extracted from the Medicaid database from 2019 to 2021. Results showed high detection frequencies of ketamine (90 %), lorazepam (87 %), clonazepam (76 %) and temazepam (73 %) across both Mexico and United States and comparatively lower detection frequencies for zaleplon (22 %), zolpidem (9 %), nordiazepam (<1 %), diazepam (<1 %), and alprazolam (<1 %) during the pandemic. Average mass consumption rates, estimated using WBE and reported in units of mg/day/1000 persons, ranged between 62 (temazepam) and 1100 (clonazepam) in the United States. Results obtained from the Medicaid database also showed a significant change (p < 0.05) in the prescription volume between the first quarter of 2019 (before the pandemic) and the first quarter of 2021 (pandemic event) for alprazolam, clonazepam and lorazepam. Study results include the first detections of zaleplon and zolpidem in wastewater from North America.

Effect of Pepper Variety on the Susceptibility of Pepper Weevil Parasitoids.

Anthonomus eugenii Cano (Coleoptera: Curculionidae) is a key pest of cultivated peppers (Capsicum species) in tropical and subtropical America. Here we evaluated the effect of five pepper varieties on the susceptibility of A. eugenii to the parasitoids Bracon sp. (Hymenoptera: Braconidae), Eupelmus cushmani (Crawford) (Hymenoptera: Eupelmidae), and Jaliscoa hunteri Crawford (Hymenoptera: Pteromalidae). Potential parasitism was estimated by comparative analysis of parasitoid ovipositor size and the depth to which host larvae develop inside the fruit. Highest potential parasitism rates were achieved by Bracon sp. and E. cushmani on árbol and habanero peppers (84-99%) while the lowest rates were achieved by J. hunteri on serrano, bell, and jalapeño (7-18%). To validate potential parasitism rates, the actual parasitism rate by Bracon sp. and J. hunteri on three varieties of peppers was assessed. Actual parasitism rates of A. eugenii larvae in árbol were similar for Bracon sp. and J. hunteri (33%), while on bell and jalapeño Bracon sp. achieved 24% and 13% parasitism and J. hunteri achieved 14% and 8%, respectively. In most cases, actual parasitism was lower than estimated potential parasitism, although the latter had a notable predictive power (predicted R2 = 0.84). Results showed that the host was more vulnerable on small-fruited varieties because larvae were closer to the pericarp and could be reached by parasitoid ovipositors; likewise, in varieties with little placenta and seed, some larvae fed in the pericarp, where they were more vulnerable.

An opinion on Wastewater-Based Epidemiological Monitoring (WBEM) with Clinical Diagnostic Test (CDT) for detecting high-prevalence areas of community COVID-19 Infections.

Wastewater-Based Epidemiological Monitoring (WBEM) is an efficient surveillance tool during the COVID-19 pandemic as it meets all requirements of a complete monitoring system including early warning, tracking the current trend, prevalence of the disease, detection of genetic diversity as well asthe up-surging SARS-CoV-2 new variants with mutations from the wastewater samples. Subsequently, Clinical Diagnostic Test is widely acknowledged as the global gold standard method for disease monitoring, despite several drawbacks such as high diagnosis cost, reporting bias, and the difficulty of tracking asymptomatic patients (silent spreaders of the COVID-19 infection who manifest nosymptoms of the disease). In this current reviewand opinion-based study, we first propose a combined approach) for detecting COVID-19 infection in communities using wastewater and clinical sample testing, which may be feasible and effective as an emerging public health tool for the long-term nationwide surveillance system. The viral concentrations in wastewater samples can be used as indicatorsto monitor ongoing SARS-CoV-2 trends, predict asymptomatic carriers, and detect COVID-19 hotspot areas, while clinical sampleshelp in detecting mostlysymptomaticindividuals for isolating positive cases in communities and validate WBEM protocol for mass vaccination including booster doses for COVID-19.

Allergy, Anaphylaxis, and Nonallergic Hypersensitivity: IgE, Mast Cells, and Beyond.

IgE-mediated type I hypersensitivity reactions have many reported beneficial functions in immune defense against parasites, venoms, toxins, etc. However, they are best known for their role in allergies, currently affecting almost one third of the population worldwide. IgE-mediated allergic diseases result from a maladaptive type 2 immune response that promotes the synthesis of IgE antibodies directed at a special class of antigens called allergens. IgE antibodies bind to type I high-affinity IgE receptors (FcεRI) on mast cells and basophils, sensitizing them to get triggered in a subsequent encounter with the cognate allergen. This promotes the release of a large variety of inflammatory mediators including histamine responsible for the symptoms of immediate hypersensitivity. The development of type 2-driven allergies is dependent on a complex interplay of genetic and environmental factors at barrier surfaces including the host microbiome that builds up during early life. While IgE-mediated immediate hypersensitivity reactions are undoubtedly at the origin of the majority of allergies, it has become clear that similar responses and symptoms can be triggered by other types of adaptive immune responses mediated via IgG or complement involving other immune cells and mediators. Likewise, various nonadaptive innate triggers via receptors expressed on mast cells have been found to either directly launch a hypersensitivity reaction and/or to amplify existing IgE-mediated responses. This review summarizes recent findings on both IgE-dependent and IgE-independent mechanisms in the development of allergic hypersensitivities and provides an update on the diagnosis of allergy.

Expanding the Scope of Nanobiocatalysis and Nanosensing: Applications of Nanomaterial Constructs.

The synergistic interaction between advanced biotechnology and nanotechnology has allowed the development of innovative nanomaterials. Those nanomaterials can conveniently act as supports for enzymes to be employed as nanobiocatalysts and nanosensing constructs. These systems generate a great capacity to improve the biocatalytic potential of enzymes by improving their stability, efficiency, and product yield, as well as facilitating their purification and reuse for various bioprocessing operating cycles. The different specific physicochemical characteristics and the supramolecular nature of the nanocarriers obtained from different economical and abundant sources have allowed the continuous development of functional nanostructures for different industries such as food and agriculture. The remarkable biotechnological potential of nanobiocatalysts and nanosensors has generated applied research and use in different areas such as biofuels, medical diagnosis, medical therapies, environmental bioremediation, and the food industry. The objective of this work is to present the different manufacturing strategies of nanomaterials with various advantages in biocatalysis and nanosensing of various compounds in the industry, providing great benefits to society and the environment.

Photolyase Production and Current Applications: A Review.

The photolyase family consists of flavoproteins with enzyme activity able to repair ultraviolet light radiation damage by photoreactivation. DNA damage by the formation of a cyclobutane pyrimidine dimer (CPD) and a pyrimidine-pyrimidone (6-4) photoproduct can lead to multiple affections such as cellular apoptosis and mutagenesis that can evolve into skin cancer. The development of integrated applications to prevent the negative effects of prolonged sunlight exposure, usually during outdoor activities, is imperative. This study presents the functions, characteristics, and types of photolyases, their therapeutic and cosmetic applications, and additionally explores some photolyase-producing microorganisms and drug delivery systems.