Percentage of change and increment of the glucose level after a normal oral tolerance curve between 24 and 28 weeks of pregnancy.

AIM: To determine the percentage of change and increment in glucose levels after a normal oral glucose tolerance test between 24 and 28 weeks of pregnancy. METHODS: We studied 3510 pregnant women who attended their obstetric delivery at a tertiary care hospital in Guadalajara, Mexico in 2018, according to characteristics and risk 1647 (47%) patients were screened for diabetes diagnosis using the oral glucose tolerance test, 501 patients reported normal values between their 24th and 28th week of pregnancy, only 400 patients had their fasting glucose level measured on the same day of their obstetric delivery, to be compared. RESULTS: Average age was 30 years, with an average of 25.3 weeks of pregnancy. The fasting serum glucose levels taken after 28 weeks of pregnancy and before the obstetrical delivery showed an increase of 1.1 mmol/L in women who develop gestational diabetes mellitus, in contrast to women who did not develop gestational diabetes mellitus after 28 weeks their blood glucose only increased on average 0.4 mmol/L. The incidence of gestational diabetes mellitus in the study population during 2018 was 32.7%. Patients who developed gestational diabetes mellitus after a normal oral glucose tolerance test had greater body mass index before the pregnancy and newborns had a higher weight than babies born to mothers without gestational diabetes mellitus. CONCLUSION: Changes in glucose levels after the oral tolerance test of normal glucose require strict monitoring, in that it was demonstrated that 3% of patients developed gestational diabetes mellitus after week 28 of gestation.

Fluorinated Graphene Enables the Growth of Inorganic Thin Films by Chemical Bath Deposition on Otherwise Inert Substrates.

Chemically modified graphenes (CMGs) offer a means to tune a wide variety of graphene's exceptional properties. Critically, CMGs can be transferred onto a variety of substrates, thereby imparting functionalities to those substrates that would not be obtainable through conventional functionalization. One such application of CMGs is enabling and controlling the subsequent growth of inorganic thin films. In the current study, we demonstrated that CMGs enhance the growth of inorganic films on inert surfaces with poor growth properties. Fluorinated graphene transferred onto polyethylene enabled the dense and homogeneous deposition of a cadmium sulfide (CdS) film grown via chemical bath deposition. We showed that the coverage of the CdS film can be controlled by the degree of fluorination from less than 20% to complete coverage of the film. The approach can also be applied to other technologically important materials such as ZnO. Finally, we demonstrated that electron beam-generated plasma in a SF6-containing background could pattern fluorine onto a graphene/PE sample to selectively grow CdS films on the fluorinated region. Therefore, CMG coatings can tailor the surface properties of polymers and control the growth of inorganic thin films on polymers for the development of flexible electronics.

Plasma-Modified, Epitaxial Fabricated Graphene on SiC for the Electrochemical Detection of TNT.

Using square wave voltammetry, we show an increase in the electrochemical detection of trinitrotoluene (TNT) with a working electrode constructed from plasma modified graphene on a SiC surface vs. unmodified graphene. The graphene surface was chemically modified using electron beam generated plasmas produced in oxygen or nitrogen containing backgrounds to introduce oxygen or nitrogen moieties. The use of this chemical modification route enabled enhancement of the electrochemical signal for TNT, with the oxygen treatment showing a more pronounced detection than the nitrogen treatment. For graphene modified with oxygen, the electrochemical response to TNT can be fit to a two-site Langmuir isotherm suggesting different sites on the graphene surface with different affinities for TNT. We estimate a limit of detection for TNT equal to 20 ppb based on the analytical standard S/N ratio of 3. In addition, this approach to sensor fabrication is inherently a high-throughput, high-volume process amenable to industrial applications. High quality epitaxial graphene is easily grown over large area SiC substrates, while plasma processing is a rapid approach to large area substrate processing. This combination facilitates low cost, mass production of sensors.

Modifying Surface Energy of Graphene via Plasma-Based Chemical Functionalization to Tune Thermal and Electrical Transport at Metal Interfaces.

The high mobility exhibited by both supported and suspended graphene, as well as its large in-plane thermal conductivity, has generated much excitement across a variety of applications. As exciting as these properties are, one of the principal issues inhibiting the development of graphene technologies pertains to difficulties in engineering high-quality metal contacts on graphene. As device dimensions decrease, the thermal and electrical resistance at the metal/graphene interface plays a dominant role in degrading overall performance. Here we demonstrate the use of a low energy, electron-beam plasma to functionalize graphene with oxygen, fluorine, and nitrogen groups, as a method to tune the thermal and electrical transport properties across gold-single layer graphene (Au/SLG) interfaces. We find that while oxygen and nitrogen groups improve the thermal boundary conductance (hK) at the interface, their presence impairs electrical transport leading to increased contact resistance (ρC). Conversely, functionalization with fluorine has no impact on hK, yet ρC decreases with increasing coverage densities. These findings indicate exciting possibilities using plasma-based chemical functionalization to tailor the thermal and electrical transport properties of metal/2D material contacts.

Direct mechanochemical cleavage of functional groups from graphene.

Mechanical stress can drive chemical reactions and is unique in that the reaction product can depend on both the magnitude and the direction of the applied force. Indeed, this directionality can drive chemical reactions impossible through conventional means. However, unlike heat- or pressure-driven reactions, mechanical stress is rarely applied isometrically, obscuring how mechanical inputs relate to the force applied to the bond. Here we report an atomic force microscope technique that can measure mechanically induced bond scission on graphene in real time with sensitivity to atomic-scale interactions. Quantitative measurements of the stress-driven reaction dynamics show that the reaction rate depends both on the bond being broken and on the tip material. Oxygen cleaves from graphene more readily than fluorine, which in turn cleaves more readily than hydrogen. The technique may be extended to study the mechanochemistry of any arbitrary combination of tip material, chemical group and substrate.

Growth and spectroscopic characterization of monolayer and few-layer hexagonal boron nitride on metal substrates.

Atomically thin two dimensional hexagonal boron nitride (2D h-BN) is one of the key materials in the development of new van der Waals heterostructures due to its outstanding properties including an atomically smooth surface, high thermal conductivity, high mechanical strength, chemical inertness and high electrical resistance. The development of 2D h-BN growth is still in the early stages and largely depends on rapid and accurate characterization of the grown monolayer or few layers h-BN films. This paper demonstrates a new approach to characterizing monolayer h-BN films directly on metal substrates by grazing-incidence infrared reflection absorption spectroscopy (IRRAS). Using h-BN films grown by atmospheric-pressure chemical vapor deposition on Cu and Ni substrates, two new sub-bands are found for the A2u out-of-plane stretching mode. It is shown, using both experimental and computational methods, that the lower-energy sub-band is related to 2D h-BN coupled with substrate, while the higher energy sub-band is related to decoupled (or free-standing) 2D h-BN. It is further shown that this newly-observed fine structure in the A2u mode can be used to assess, quickly and easily, the homogeneity of the h-BN-metal interface and the effects of metal surface contamination on adhesion of the layer.

Chemical gradients on graphene to drive droplet motion.

This work demonstrates the production of a well-controlled, chemical gradient on the surface of graphene. By inducing a gradient of oxygen functional groups, drops of water and dimethyl-methylphosphonate (a nerve agent simulant) are "pulled" in the direction of increasing oxygen content, while fluorine gradients "push" the droplet motion in the direction of decreasing fluorine content. The direction of motion is broadly attributed to increasing/decreasing hydrophilicity, which is correlated to high/low adhesion and binding energy. Such tunability in surface chemistry provides additional capabilities in device design for applications ranging from microfluidics to chemical sensing.

High-quality uniform dry transfer of graphene to polymers.

In this paper we demonstrate high-quality, uniform dry transfer of graphene grown by chemical vapor deposition on copper foil to polystyrene. The dry transfer exploits an azide linker molecule to establish a covalent bond to graphene and to generate greater graphene-polymer adhesion compared to that of the graphene-metal foil. Thus, this transfer approach provides a novel alternative route for graphene transfer, which allows for the metal foils to be reused.

Sensitive Detection of Elemental Mercury Vapor by Gold Nanoparticle Decorated Carbon Nanotube Sensors.

Low-cost, low power consumption gas sensors that can detect or quantify various gas analytes are of increasing interest for various applications ranging from mobile health, to environmental exposure assessment and homeland security. In particular miniature gas sensors based on nanomaterials that can be manufactured in the form of sensor arrays present great potential for the development of portable monitoring devices. In this study, we demonstrate that a chemiresistive nanosensor comprised of single walled carbon nanotubes decorated with gold nanoparticles has impressive sensitivity to elemental mercury (Hg) gas concentrations, with a lower detection limit as low as 2 ppb(v). Furthermore, this nanosensor was found to regenerate, though slowly, without any additional recovery steps. Finally, the mercury vapor sensing mechanism allowed for direct investigations into the origin of Surface Enhanced Raman Scattering (SERS) in carbon nanotubes decorated with Au nanoparticles.

Tuning the gas sensing performance of single PEDOT nanowire devices.

This paper reports the synthesis and dopant dependent electrical and sensing properties of single poly(ethylenedioxythiophene) (PEDOT) nanowire sensors. Dopant type (i.e. polystyrenesulfonate (PSS(-)) and perchlorate (ClO(4)(-))) and solvent (i.e. acetonitrile and 1 : 1 water-acetonitrile mixture) were adjusted to change the conjugation length and hydrophilicity of nanowires which resulted in change of the electrical properties and sensing performance. Temperature dependent coefficient of resistance (TCR) indicated that the electrical properties are greatly dependent on dopants and electrolyte where greater disorder was found in PSS(-) doped PEDOT nanowires compared to ClO(4)(-) doped nanowires. Upon exposure to different analytes including water vapor and volatile organic compounds, these nanowire devices displayed substantially different sensing characteristics. ClO(4)(-) doped PEDOT nanowires from an acetonitrile bath show superior sensing responses toward less electronegative analytes and followed a power law dependence on the analyte concentration at high partial pressures. These tunable sensing properties were attributed to variation in the conjugation lengths, dopant type and concentration of the wires which may be attributed to two distinct sensing mechanisms: swelling within the bulk of the nanowire and work function modulation of Schottky barrier junction between nanowire and electrodes.