In vitro characterization of a novel resin-based restorative material containing alkaline fillers.

OBJECTIVE: In this study, a comparative evaluation of the physicochemical properties of Cention N and other direct restorative materials was performed. Three restorative materials-a resin-modified glass ionomer (Fuji II LC), an alkasite-based resinous material (Cention N), and a resin composite (Tetric N Ceram)-were characterized in terms of degree of conversion, Knoop hardness number (KHN) ratio, flexural strength, elastic modulus, water sorption, water solubility, microshear bond strength to dentin, immediate microleakage, and radiopacity. METHODOLOGY: The microshear bond strength to dentin and microleakage of Cention N were evaluated with and without the application of an adhesive system (Tetric N Bond Universal). A one-way ANOVA test was used to analyze the data in terms of degree of conversion, KHN ratio, water sorption, water solubility, microshear bond strength to dentin, and radiopacity. A two-way ANOVA test (carried out considering the material type and ethanol aging as factors) was used to analyze the data in terms of flexural strength and elastic modulus. The Kruskal-Wallis test was used to statistically analyze the data on microleakage. A significance level of α=0.05 was used for all tests. RESULTS: Fuji II LC was found to have the highest degree of conversion, water sorption, and microleakage, as well as the lowest flexural strength. Cention N had the highest solubility; when used with an adhesive system, it achieved bond strength and microleakage similar to those of the Tetric N Ceram composite. Tetric N Ceram had the highest degree of conversion, KHN ratio, and radiopacity. Conclusion: The properties of Cention N validate its efficacy as an alternative direct restorative material when used in conjunction with an adhesive system.

In vitro characterization of a novel resin-based restorative material containing alkaline fillers

Abstract Objective: In this study, a comparative evaluation of the physicochemical properties of Cention N and other direct restorative materials was performed. Three restorative materials—a resin-modified glass ionomer (Fuji II LC), an alkasite-based resinous material (Cention N), and a resin composite (Tetric N Ceram)—were characterized in terms of degree of conversion, Knoop hardness number (KHN) ratio, flexural strength, elastic modulus, water sorption, water solubility, microshear bond strength to dentin, immediate microleakage, and radiopacity. Methodology: The microshear bond strength to dentin and microleakage of Cention N were evaluated with and without the application of an adhesive system (Tetric N Bond Universal). A one-way ANOVA test was used to analyze the data in terms of degree of conversion, KHN ratio, water sorption, water solubility, microshear bond strength to dentin, and radiopacity. A two-way ANOVA test (carried out considering the material type and ethanol aging as factors) was used to analyze the data in terms of flexural strength and elastic modulus. The Kruskal-Wallis test was used to statistically analyze the data on microleakage. A significance level of α=0.05 was used for all tests. Results: Fuji II LC was found to have the highest degree of conversion, water sorption, and microleakage, as well as the lowest flexural strength. Cention N had the highest solubility; when used with an adhesive system, it achieved bond strength and microleakage similar to those of the Tetric N Ceram composite. Tetric N Ceram had the highest degree of conversion, KHN ratio, and radiopacity. Conclusion: The properties of Cention N validate its efficacy as an alternative direct restorative material when used in conjunction with an adhesive system.

Depression and opinion of dental students regarding the hybrid learning model during the COVID-19 pandemic.

BACKGROUND: The global spread of COVID-19 forced schools at all educational levels to close, which was repeated in more than 60 countries. In addition, the COVID-19 pandemic has affected the mental health of dental students world wide. This study hypothesizes that the prevalence of depression in dental students from El Salvador is higher than that reported in studies from Europe, Asia, and North America. METHODS: This study was an online cross-sectional survey performed at the Faculty of Dentistry of the University of Salvador. The PHQ-9 questionnaire was applied to know the level of depression of the students, and a questionnaire focused on learning the opinion of the students on the hybrid teaching model adopted. Approximately 450 students participated in both questionnaires. RESULTS: Regarding the levels of depression present in the students, 14% had minimal depression, 29% had medium depression, 23% had moderate depression and, 34% had severe depression. The students had an excellent opinion regarding the hybrid learning model. CONCLUSIONS: The prevalence of depression in dental students in El Salvador seems to be higher than that reported in studies in non-Latin American countries. Therefore, universities must generate care plans for mental health to avoid these harmful effects on students during future contingencies.

Effect of scanning strategies on the accuracy of digital intraoral scanners: a meta-analysis of in vitro studies.

PURPOSE: This study aimed to investigate whether the accuracy of intraoral scanners is influenced by different scanning strategies in an in vitro setting, through a systematic review and meta-analysis. MATERIALS AND METHODS: This review was conducted in accordance with the PRISMA 2020 standard. The following PICOS approach was used: population, tooth impressions; intervention, the use of intraoral scanners with scanning strategies different from the manufacturer's instructions; control, the use of intraoral scanners following the manufacturers' requirements; outcome, accuracy of intraoral scanners; type of studies, in vitro. A comprehensive literature search was conducted across various databases including Embase, SciELO, PubMed, Scopus, and Web of Science. The inclusion criteria were based on in vitro studies that reported the accuracy of digital impressions using intraoral scanners. Analysis was performed using Review Manager software (version 5.3.5; Cochrane Collaboration, Copenhagen, Denmark). Global comparisons were made using a standardized mean difference based on random-effect models, with a significance level of α = 0.05. RESULTS: The meta-analysis included 15 articles. Digital impression accuracy significantly improved under dry conditions (P < 0.001). Moreover, trueness and precision were enhanced when artificial landmarks were used (P ≤ 0.02) and when an S-shaped pattern was followed (P ≤ 0.01). However, the type of light used did not have a significant impact on the accuracy of the digital intraoral scanners (P ≥ 0.16). CONCLUSION: The accuracy of digital intraoral scanners can be enhanced by employing scanning processes using artificial landmarks and digital impressions under dry conditions.

LIGHT-CURED CALCIUM SILICATE BASED-CEMENTS AS PULP THERAPEUTIC AGENTS: A META-ANALYSIS OF CLINICAL STUDIES.

OBJECTIVES: To determine the clinical performance of light-cured calcium silicate-based cement for direct or indirect pulp capping. The research question was as follows: in teeth with deep caries lesions, does the use of resin-modified calcium silicate-containing composites improve the radiological success and prevent irreversible pulpitis and pulpal necrosis compared with other pulp-capping agents? MATERIALS AND METHODS: The following databases were screened until September 2021: PubMed, Web of Science, Scielo, Scopus, Embase, and The Cochrane Library. Randomized clinical trials reporting the clinical evaluation of a resin-modified calcium silicate material as an agent for pulp therapy were included. Meta-analysis was performed using the Rev Manager v5.4.1 software. The risk difference and 95% confidence interval of the dichotomous outcome (restoration failure or success) were calculated for comparison. RESULTS: Ten studies were considered for qualitative analysis and meta-analysis. Studies evaluating the performance of light-cured calcium silicate-based cement from 1 month to a maximum follow-up period of 36 months and comparing it with the performance of CaOH, mineral trioxide aggregate, or Biodentine were included. In the global analysis for direct pulp capping at 6-month follow-up, no statistical differences were observed between the experimental group using the light-cured calcium silicate-based cement and control group (P = .28). However, at 12-month follow-up, global analysis favored the control group (P < .001). For indirect pulp capping, at 6- and 24-month follow-ups, no statistically significant differences were observed between the experimental and control groups (P = .88; P = .21). CONCLUSIONS: Light-cured calcium silicate-based cement showed a limited clinical performance as a direct pulp capping agent, especially when evaluated in the long term. However, using it as an indirect pulp capping agent may be a reliable and easy-to-use option for restoring teeth with deep caries. CLINICAL SIGNIFICANCE: This systematic review provides evidence that supports the use of light-cured calcium silicate-based cement as an indirect pulp capping agent.

Autism and Paediatric Dentistry: A Scoping Review.

PURPOSE: The objectives of this scoping review were: first, to pose a research question; second, to identify relevant studies to answer the research question; third, to select and retrieve the studies; fourth, to chart the critical data; and finally, to collate, summarise, and report the results from selected articles on the dental management of children affected with autism. MATERIALS AND METHODS: Relevant articles (randomised controlled trials, reviews, observational studies, and clinical case reports) published over an 11-year period were identified and retrieved from five internet databases: PubMed, Embase/Ovid, Cochrane Library, Google Scholar, and EBSCO. RESULTS: By title and abstract screening and after removing duplicates, 25 articles were finally included in the present scoping review. According to the extracted data, the following four clinical issues were found to be most important: patient behavioural control, prevalence/incidence of dental caries, adverse effects and interactions with medications, and orthodontic management. Additionally, several useful clinical recommendations are provided. CONCLUSIONS: Paediatric dentists should bear in mind that early diagnosis and treatment, effective communication skills, and a long-term follow-up of children with autism continue to be the best approaches for achieving enhanced patient psychological well-being and consequently a better quality of life.

Quick correction of a skeletal class III maloclussion in primary dentition with face mask plus rapid maxillary expansion therapy / Corrección rápida de una maloclusión esquelética clase III en dentición primaria con máscara facial más terapia rápida de expansión maxilar

Abstract Skeletal Class III is a malocclusion characterized by anterior crossbite as a result of an abnormal skeletal maxillary and mandibular base discrepancy, which involves disharmony of craneofacial skeleton and profile. The preferred management for children having skeletal Class III malocclusion with retruded maxilla and/or prognathic mandible is the use of devices that encourage the growth and anterior movement of the maxilla bone and/or restrict the exessive mandible growth. The orthopedic treatment consisting of a face mask with rapid maxillary expansion (RME) produces the most dramatic results in the shortest period of time. The purpose of this article is to review a quick correction of skeletal class III maloclussion in the primary dentition through a case example with use of a face mask plus rapid maxillary expansion therapy in a 5 year-old male patient due to a combination of retruded maxilla and protruded mandible, in primary dentition, who was treated with a Petit face mask in conjunction with a bonded RME intraoral appliance added with bite blocks. The first evident occlusal outcomes were a clockwise rotation of the mandible, a positive overjet of 3 mm, a correct overbite, a canine Class I relationship, and a bilateral flush terminal plane. After discussing the present clinical case report and the related published literature, we concluded that skeletal class III malocclusions should be treated as soon as the first clinical signs of abnormal craniofacial growth are recognized, during the first years of life.

Resumen La clase III esquelética es una maloclusión caracterizada por mordida cruzada anterior como resultado de una discrepancia esquelética de la base maxilar y mandibular, que implica desarmonía craneofacial y del perfil. El tratamiento de elección para niños con maloclusión clase III esquelética con mandíbula maxilar y/o prognática es el uso de dispositivos que estimulan el crecimiento y el movimiento anterior del hueso maxilar y/o restringen el crecimiento excesivo de la mandíbula. El tratamiento ortopédico que consiste en una máscara facial con expansión maxilar rápida (EMR) produce resultados en un período de tiempo más corto. El propósito de este artículo es revisar una corrección rápida de la maloclusión de clase III esquelética en la dentición primaria mediante el uso de una máscara facial más terapia de expansión maxilar rápida en un paciente masculino de 5 años debido a una combinación de maxilar retruido y mandíbula prominente, en dentición primaria, que fue tratada con una mascarilla Petit junto con un dispositivo intraoral unido con bloques de mordida. Los primeros resultados evidentes fueron una rotación en sentido horario de la mandíbula, un overjet positivo de 3 mm, una sobremordida correcta, una relación canina de Clase I y un plano terminal de descarga bilateral. Después de discutir el presente informe de caso clínico y la literatura publicada relacionada, concluimos que las maloclusiones de clase III esqueléticas deberían tratarse tan pronto como se reconozcan los primeros signos clínicos de crecimiento craneofacial anormal, durante los primeros años de vida.