Commercial toilets emit energetic and rapidly spreading aerosol plumes.

Aerosols can transmit infectious diseases including SARS-CoV-2, influenza and norovirus. Flushed toilets emit aerosols that spread pathogens contained in feces, but little is known about the spatiotemporal evolution of these plumes or the velocity fields that transport them. Using laser light to illuminate ejected aerosols we quantify the kinematics of plumes emanating from a commercial flushometer-type toilet, and use the motion of aerosol particles to compute velocity fields of the associated flow. The toilet flush produces a strong chaotic jet with velocities exceeding 2 m/s; this jet transports aerosols to heights reaching 1.5 m within 8 seconds of initiating a flush. Quantifying toilet plumes and associated flow velocities provides a foundation for future design strategies to mitigate plume formation or to disinfect pathogens within it.

Investigating transmission of SARS-CoV-2 using novel face mask sampling: a protocol for an observational prospective study of index cases and their contacts in a congregate setting.

INTRODUCTION: This study aims to measure how transmission of SARS-CoV-2 occurs in communities and to identify conditions that lend to increased transmission focusing on congregate situations. We will measure SARS-CoV-2 in exhaled breath of asymptomatic and symptomatic persons using face mask sampling-a non-invasive method for SARS-CoV-2 detection in exhaled air. We aim to detect transmission clusters and identify risk factors for SARS-CoV-2 transmission in presymptomatic, asymptomatic and symptomatic individuals. METHODS AND ANALYSIS: In this observational prospective study with daily follow-up, index cases and their respective contacts are identified at each participating institution. Contact definitions are based on Centers for Disease Control and Prevention and local health department guidelines. Participants will wear masks with polyvinyl alcohol test strips adhered to the inside for 2 hours daily. The strips are applied to all masks used over at least 7 days. In addition, self-administered nasal swabs and (optional) finger prick blood samples are performed by participants. Samples are tested by standard PCR protocols and by novel antigen tests. ETHICS AND DISSEMINATION: This study was approved by the Colorado Multiple Institutional Review Board and the WHO Ethics Review Committee. From the data generated, we will analyse transmission clusters and risk factors for transmission of SARS-CoV-2 in congregate settings. The kinetics of asymptomatic transmission and the evaluation of non-invasive tools for detection of transmissibility are of crucial importance for the development of more targeted control interventions-and ultimately to assist with keeping congregate settings open that are essential for our social fabric. TRIAL REGISTRATION NUMBER: ClinicalTrials.gov (#NCT05145803).

High-resolution microbial community succession of microbially induced concrete corrosion in working sanitary manholes.

Microbially-induced concrete corrosion in headspaces threatens wastewater infrastructure worldwide. Models for predicting corrosion rates in sewer pipe networks rely largely on information from culture-based investigations. In this study, the succession of microbes associated with corroding concrete was characterized over a one-year monitoring campaign using rRNA sequence-based phylogenetic methods. New concrete specimens were exposed in two highly corrosive manholes (high concentrations of hydrogen sulfide and carbon dioxide gas) on the Colorado Front Range for up to a year. Community succession on corroding surfaces was assessed using Illumina MiSeq sequencing of 16S bacterial rRNA amplicons and Sanger sequencing of 16S universal rRNA clones. Microbial communities associated with corrosion fronts presented distinct succession patterns which converged to markedly low α-diversity levels (< 10 taxa) in conjunction with decreasing pH. The microbial community succession pattern observed in this study agreed with culture-based models that implicate acidophilic sulfur-oxidizer Acidithiobacillus spp. in advanced communities, with two notable exceptions. Early communities exposed to alkaline surface pH presented relatively high α-diversity, including heterotrophic, nitrogen-fixing, and sulfur-oxidizing genera, and one community exposed to neutral surface pH presented a diverse transition community comprised of less than 20% sulfur-oxidizers.

Carbon dioxide and hydrogen sulfide associations with regional bacterial diversity patterns in microbially induced concrete corrosion.

The microbial communities associated with deteriorating concrete corrosion fronts were characterized in 35 samples taken from wastewater collection and treatment systems in ten utilities. Bacterial communities were described using Illumina MiSeq sequencing of the V1V2 region of the small subunit ribosomal ribonucleic acid (SSU-rRNA) gene recovered from fresh corrosion products. Headspace gas concentrations (hydrogen sulfide, carbon dioxide, and methane), pore water pH, moisture content, and select mineralogy were tested for correlation to community outcomes and corrosion extent using pairwise linear regressions and canonical correspondence analysis. Corroding concrete was most commonly characterized by moisture contents greater than 10%, pore water pH below one, and limited richness (<10 taxa). Bacterial community composition was not correlated to geographic location when considered independently from other environmental factors. Corrosion was most severe in sites with high levels of hydrogen sulfide (>100 ppm) and carbon dioxide (>1%) gases, conditions which also were associated with low diversity biofilms dominated by members of the acidophilic sulfur-oxidizer genus Acidithiobacillus.

Tetracycline resistance and Class 1 integron genes associated with indoor and outdoor aerosols.

Genes encoding tetracycline resistance and the integrase of Class 1 integrons were enumerated using quantitative PCR from aerosols collected from indoor and outdoor environments. Concentrated animal feeding operations (CAFOs) and human-occupied indoor environments (two clinics and a homeless shelter) were found to be a source of airborne tet(X) and tet(W) genes. The CAFOs had 10- to 100-times higher concentrations of airborne 16S rRNA, tet(X), and tet(W) genes than other environments sampled, and increased concentrations of aerosolized bacteria correlated with increased concentrations of airborne resistance genes. The two CAFOs studied had statistically similar concentrations of resistance genes in their aerosol samples, even though antibiotic use was markedly different between the two operations. Additionally, tet(W) genes were recovered in outdoor air within 2 km of livestock operations, which suggests that antibiotic resistance genes may be transported via aerosols on local scales. The integrase gene (intI1) from Class 1 integrons, which has been associated with multidrug resistance, was detected in CAFOs but not in human-occupied indoor environments, suggesting that CAFO aerosols could serve as a reservoir of multidrug resistance. In conclusion, our results show that CAFOs and clinics are sources of aerosolized antibiotic resistance genes that can potentially be transported via air movement.

A method for assessing the disinfection response of microbial bioaerosols retained in antimicrobial filter materials and textiles.

The diversity of applications utilizing antimicrobial laden textiles continues to grow, yet testing methods based on the liquid loading of cultures to challenge textiles remain unchanged. For bioaerosol applications, liquid challenge methods are unsuitable. We present a method of aerosol based loading and microbial recovery for contextual testing antimicrobial textiles.

Short-term temporal variability in airborne bacterial and fungal populations.

Airborne microorganisms have been studied for centuries, but the majority of this research has relied on cultivation-dependent surveys that may not capture all of the microbial diversity in the atmosphere. As a result, our understanding of airborne microbial ecology is limited despite the relevance of airborne microbes to human health, various ecosystem functions, and environmental quality. Cultivation-independent surveys of small-subunit rRNA genes were conducted in order to identify the types of airborne bacteria and fungi found at a single site (Boulder, CO) and the temporal variability in the microbial assemblages over an 8-day period. We found that the air samples were dominated by ascomycete fungi of the Hypocreales order and a diverse array of bacteria, including members of the proteobacterial and Cytophaga-Flavobacterium-Bacteroides groups that are commonly found in comparable culture-independent surveys of airborne bacteria. Bacterium/fungus ratios varied by 2 orders of magnitude over the sampling period, and we observed large shifts in the phylogenetic diversity of bacteria present in the air samples collected on different dates, shifts that were not likely to be related to local meteorological conditions. We observed more phylogenetic similarity between bacteria collected from geographically distant sites than between bacteria collected from the same site on different days. These results suggest that outdoor air may harbor similar types of bacteria regardless of location and that the short-term temporal variability in airborne bacterial assemblages can be very large.

Extra-cellular polysaccharides, soluble microbial products, and natural organic matter impact on nanofiltration membranes flux decline.

Extra-cellular polysaccharides (EPS), soluble microbiological products (SMP), dispersed bacterial cells, and a well-characterized natural organic matter (NOM) isolate were observed to determine their influence on the flux decline of model nanofiltration membrane systems. Biofouling tests were conducted using bench-scale, flat-sheet membrane modules, fed with particle-free (laboratory) waters and natural waters, some of which were augmented with readily biodegradable organic carbon. The modules were operated 6.7 x 10(5) Pa, and 21+/- 2 degrees C. Membrane flux-decline was associated with increases in surface EPS mass: between 30 and 80% of normalized flux decline occurred when membrane-associated EPS content increased from 5to 50 microg/ cm2. As judged by standard culturing, heterotrophic cell densities recovered from membrane biofilm samples showed no significant correlations with the different carbon sources present in the feedwaters, or flux decline rates. Results suggested that, in the absence of microbiological activity, SMP and NOM have intrinsic membrane fouling properties at levels that are operationally significant to commercial-scale membrane treatment practices. Results also suggested that SMP may have a biofouling potential significantly greater than some types of NOM. Trends obtained relating these compounds with flux decline were successfully described by expanding existing resistance-in-series models.

Molecular identification of potential pathogens in water and air of a hospital therapy pool.

Indoor warm-water therapy pool workers in a Midwestern regional hospital were diagnosed with non-tuberculosis pulmonary hypersensitive pneumonitis and Mycobacterium avium infections. In response, we conducted a multiseason survey of microorganisms present in this therapy pool water, in biofilms associated with the pool containment walls, and in air immediately above the pool. The survey used culture, microscopy, and culture-independent molecular phylogenetic analyses. Although outfitted with a state-of-the-art UV-peroxide disinfection system, the numbers of bacteria in the therapy pool water were relatively high compared with the potable water used to fill the pool. Regardless of the source, direct microscopic counts of microbes were routinely approximately 1,000 times greater than conventional plate counts. Analysis of clone libraries of small subunit rRNA genes from environmental DNA provided phylogenetic diversity estimates of the microorganisms collected in and above the pool. A survey of >1,300 rRNA genes yielded a total of 628 unique sequences, the most common of which was nearly identical to that of M. avium strains. The high proportion of clones with different Mycobacterium spp. rRNA genes suggested that such organisms comprised a significant fraction of microbes in the pool water (to >30%) and preferentially partition into aerosols (to >80%) relative to other waterborne bacteria present. The results of the study strongly validate aerosol partitioning as a mechanism for disease transfer in these environments. The results also show that culture protocols currently used by public health facilities and agencies are seriously inadequate for the detection and enumeration of potential pathogens.