ABSTRACT
OBJECTIVE: We have studied the use of polymethyl methacrylate (PMMA) as an alternative biopsy marker that is readily detectable with ultrasound Doppler twinkling in cases of in vitro, ex vivo, or limited duration in vivo settings. This study investigates the long-term safety and ultrasound Doppler twinkling detectability of a PMMA breast biopsy marker following local perturbations and different dwell times in a 6-mo animal experiment. METHODS: This study, which was approved by our Institutional Animal Care and Use Committee, involved three pigs and utilized various markers, including PMMA (Zimmer Biomet), 3D-printed, and Tumark Q markers. Markers were implanted at different times for each pig. Mesh material or ethanol was used to induce a local inflammatory reaction near certain markers. A semiquantitative twinkling score assessed twinkling for actionable localization during monthly ultrasounds. At the primary endpoint, ultrasound-guided localization of lymph nodes with detectable markers was performed. Following surgical resection of the localized nodes, histomorphometric analysis was conducted to evaluate for tissue ingrowth and the formation of a tissue rind around the markers. RESULTS: No adverse events occurred. Twinkling scores of all markers for all three pigs decreased gradually over time. The Q marker exhibited the highest mean twinkling score followed by the PMMA marker, PMMA with mesh, and Q with ethanol. The 3D-printed marker with mesh and PMMA with ethanol had the lowest scores. All wire-localized lymph nodes were successfully resected. Despite varying percentages of tissue rind around the markers and a significant reduction in overall twinkling (p < 0.001) over time, mean PMMA twinkling scores remained clinically actionable at 6 and 5 mo using a General Electric C1-6 probe and 9L-probe, respectively. CONCLUSIONS: In this porcine model, the PMMA marker demonstrates an acceptable safety profile. Clinically actionable twinkling aids PMMA marker detection even after 6 mo of dwell time in porcine lymph nodes. The Q marker maintained the greatest twinkling over time compared to all the other markers studied.
Subject(s)
Polymethyl Methacrylate , Animals , Swine , Female , Breast/diagnostic imaging , Ultrasonography, Mammary/methods , Models, Animal , Biopsy/methodsABSTRACT
Since its first description 25 years ago, color Doppler twinkling has been a compelling ultrasound feature in diagnosing urinary stones. While the fundamental cause of twinkling remains elusive, the distinctive twinkling signature is diagnostically valuable in clinical practice. It can be inferred that if an entity twinkles, it empirically has certain physical features. This work investigates a manipulable polymeric material, polymethyl methacrylate (PMMA), which twinkles and has measurable surface roughness and porosity that likely contribute to twinkling. Comparative investigation of these structural properties and of the twinkling signatures of breast biopsy markers made from PMMA and selected commercially available markers showed how twinkling can improve ultrasound detection of devices intentionally designed to twinkle. While this specific application of detecting breast biopsy markers by twinkling may provide a way to approach an unmet need in the care of patients with breast cancer, this work ultimately provides a platform from which the keys to unlocking the fundamental physics of twinkling can be rigorously explored.
Subject(s)
Artifacts , Kidney Calculi , Biopsy , Humans , Kidney Calculi/pathology , Polymethyl Methacrylate , Ultrasonography, Doppler, ColorABSTRACT
IMPACT STATEMENT: This article describes the feasibility and path to establishing a current good manufacturing practice biomaterial facility in an academic medical center. It presents a solution to overcome the "Valley of Death" in bench to bedside translation of biomaterials-based medical devices. It sets a good and feasible example to those who are interested in joining the path toward clinical practice/commercialization, and helps to spur other institutions and investigators to think about how they could incorporate in-house processes and facilities to help speed up the translation of their work into first-in-human trials.
Subject(s)
Academic Medical Centers/organization & administration , Biocompatible Materials/chemistry , Delivery of Health Care/standards , Facility Design and Construction/standards , Professional Practice/standards , Tissue Engineering/methods , HumansABSTRACT
Osteosarcoma is a malignant bone tumor that occurs mainly in children and adolescents. Because Wnt signaling has been implicated in the pathogenesis of osteosarcoma, we have investigated the circulating and local levels of the Wnt antagonist protein, Secreted Frizzled Related Protein (sFRP) 3, in osteosarcoma patients. Enzyme linked immunosorbent assay (ELISA) analysis of 67 osteosarcoma and age-matched non-diseased control sera showed that sFPR3 protein levels were significantly lower in osteosarcoma than in normal. Analysis of tumor and adjacent normal tissues (9 pairs) from osteosarcoma patients showed a decrease in sFRP3 expression in 5 out of 9 tumor samples compared to normal tissues. Furthermore, immunohistochemical analysis of tissue microarray revealed a significant decrease in sFRP3 levels in tumor compared to normal bone. RNA sequencing analysis in osteosarcoma cells shows suppression of sFRP3 and concomitant expression of multiple Wnt family members mediating canonical or non-canonical Wnt signaling. Taken together, our findings show that the systemic and local levels of sFRP3 protein are downregulated in osteosarcoma and sFRP3 levels could be explored further in the diagnosis and the care of osteosarcoma patients.
Subject(s)
Bone Neoplasms/metabolism , Intracellular Signaling Peptides and Proteins/metabolism , Osteosarcoma/metabolism , Adolescent , Adult , Aged , Bone Neoplasms/blood , Bone Neoplasms/genetics , Bone Neoplasms/pathology , Cell Line, Tumor , Child , Down-Regulation , Female , Humans , Intracellular Signaling Peptides and Proteins/blood , Intracellular Signaling Peptides and Proteins/genetics , Male , Middle Aged , Osteosarcoma/blood , Osteosarcoma/genetics , Osteosarcoma/pathology , Wnt Proteins/genetics , Wnt Proteins/metabolism , Young AdultABSTRACT
To investigate the effect of sustained bone morphogenetic protein-2 (BMP-2) release kinetics on bone formation in poly(propylene fumarate) (PPF) scaffolds, different poly(lactic-co-glycolic acid) (PLGA) microspheres were used as delivery vehicles. All PPF scaffolds had the same 75% porous structure, while the degradation rate of the embedded PLGA microspheres was changed to tailor BMP-2 release by varying the lactic-to-glycolic acid (L:G) ratio in the copolymer. Four PLGA microsphere formulations with 50/50, 65/35, 75/25, and 85/15 L:G ratios and varying in vivo degradation rates were fabricated. The in vitro and in vivo BMP-2 release kinetics were determined by analyzing radiolabeled 125 I-BMP-2. Biological activity of released BMP-2 was tested using a W20-17 cell culture model in vitro and a subcutaneous rat model in vivo. Corresponding outcome parameters were defined as capacity to increase the in vitro AP activity in weekly consecutive cell cultures over 14 weeks and the in vivo bone formation after 7 and 14 weeks. The PLGA/PPF composites showed similar biological activity and BMP-2 release profiles in vitro. In vivo, PPF/PLGA 85:15 composite released significantly less BMP-2 per time point in the first weeks. Micro-CT and histological analysis after 7 and 14 weeks of implantation showed bone formation, which significantly increased over time for all composites. No significant differences were seen between the composites. Overall, the results of this study show that small differences in BMP-2 sustained release had no significant effect on BMP-2 osteogenic efficacy in PPF/PLGA composites. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 477-487, 2018.
Subject(s)
Bone Morphogenetic Protein 2/pharmacokinetics , Bone Substitutes/pharmacology , Drug Liberation , Fumarates/pharmacology , Osteogenesis/drug effects , Polypropylenes/pharmacology , Animals , Bone Morphogenetic Protein 2/chemistry , Bone Morphogenetic Protein 2/pharmacology , Bone Substitutes/chemistry , Cell Line , Extremities/transplantation , Fumarates/chemistry , Iodine Radioisotopes/chemistry , Iodine Radioisotopes/pharmacology , Kinetics , Male , Mice , Microspheres , Osteoblasts/drug effects , Polylactic Acid-Polyglycolic Acid Copolymer/chemistry , Polylactic Acid-Polyglycolic Acid Copolymer/pharmacology , Polypropylenes/chemistry , Porosity , Rats , Rats, Sprague-DawleyABSTRACT
In this article, a "bedside to bench and back" approach for developing tissue engineered medical products (TEMPs) for clinical applications is reviewed. The driving force behind this approach is unmet clinical needs. Preclinical research, both in vitro and in vivo using small and large animal models, will help find solutions to key research questions. In clinical research, ethical issues regarding the use of cells and tissues, their sources, donor consent, as well as clinical trials are important considerations. Regulatory issues, at both institutional and government levels, must be addressed prior to the translation of TEMPs to clinical practice. TEMPs are regulated as drugs, biologics, devices, or combination products by the U.S. Food and Drug Administration (FDA). Depending on the mode of regulation, applications for TEMP introduction must be filed with the FDA to demonstrate safety and effectiveness in premarket clinical studies, followed by 510(k) premarket clearance or premarket approval (for medical devices), biologics license application approval (for biologics), or new drug application approval (for drugs). A case study on nerve cuffs is presented to illustrate the regulatory process. Finally, perspectives on commercialization such as finding a company partner and funding issues, as well as physician culture change, are presented.
Subject(s)
Biomedical Research , Tissue Engineering , Animals , Biomedical Research/ethics , Biomedical Research/legislation & jurisprudence , Clinical Trials as Topic/ethics , Clinical Trials as Topic/legislation & jurisprudence , HumansABSTRACT
A modified "Klüver" or dexterity board was developed to assess fine control of hand and digit movements by nonhuman primates during the acquisition of small food pellets from wells of different diameter. The primary advantages of the new device over those used previously include standardized positioning of target food pellets and controlled testing of each hand without the need for restraints, thereby allowing the monkey to move freely about the cage. Three-dimensional video analysis of hand motion was used to provide measures of reaching accuracy and grip aperture, as well as temporal measures of reach duration and food-pellet manipulation. We also present a validated performance score based on these measures, which serves as an indicator of successful food-pellet retrieval. Tests in three monkeys show that the performance score is an effective measure with which to study fine motor control associated with learning and handedness. We also show that the device and performance scores are effective for differentiating the effects of localized injury to motor areas of the cerebral cortex.
Subject(s)
Functional Laterality , Hand Strength/physiology , Hand/physiology , Movement/physiology , Numerical Analysis, Computer-Assisted/instrumentation , Psychomotor Performance/physiology , Animals , Behavior, Animal , Biomechanical Phenomena , Brain Mapping , Feeding Behavior/physiology , Macaca mulatta/physiology , Reproducibility of Results , Videotape Recording/methodsABSTRACT
We present a modification of the automated movement assessment panel [Gash DM, Zhang Z, Umberger G, Mahood K, Smith M, Smith C, et al. An automated movement assessment panel for upper limb motor functions in rhesus monkeys and humans. J Neurosci Methods 1999;89:111-7] that incorporates a three-dimensional load cell to record forces applied by monkeys while manipulating food targets. The absolute force-time integral (total absolute impulse) is used to characterize the total of the applied forces over time as the food (carrot chip with a hole punched through the center) is manipulated and lifted from a flat surface (easiest task) and threaded over a straight rod (medium difficulty) or curved rod (highest difficulty). The total impulse can be measured even on unsuccessful attempts to acquire the food. Thus, it can be used to evaluate changes in performance even before successful acquisition occurs as in learning or recovery following a nervous system insult. We show from tests in three rhesus monkeys that the total absolute impulse measure is sensitive to task complexity, learning and lesion of frontal lobe motor areas (in one case) and that there is good reliability in day-to-day performance (even with long periods between performances) after the monkey has learned the task. Importantly, the task requires minimal training as the monkeys can be successful on even the most difficult of these tasks with one or two training sessions, yet performance improvements continue to occur over several testing sessions. Furthermore, the three levels of task difficulty permit analysis of a progression of ability.
Subject(s)
Psychomotor Performance/physiology , Animals , Conditioning, Operant/physiology , Data Collection , Functional Laterality , Hand/physiology , Hemiplegia/physiopathology , Macaca mulatta , Motor Cortex/physiologyABSTRACT
Localization of the corticofugal projection in the corona radiata (CR) and internal capsule (IC) can assist in evaluating a patient's residual motor capacity following subtotal brain damage and predicting their potential for functional restitution. To advance our understanding of the organization of the corticofugal projection in this critical brain region, we studied the trajectories of the projection arising from six different cortical arm representations in rhesus monkeys. They included the arm representation of the primary (M1), ventral lateral pre- (LPMCv), dorsolateral pre- (LPMCd), supplementary (M2), rostral cingulate (M3) and caudal cingulate (M4) motor cortices. In the CR, each pathway was segregated as medial motor area fibres arched over the caudate and lateral motor area fibres arched over the putamen. In the IC, the individual corticofugal pathways were found to be widespread, topographically organized and partially overlapping. At superior levels of the IC, the corticofugal projection from the arm representation of M3 coursed through the middle and posterior portion of the anterior limb (ICa). The projection from M2 passed through the posterior portion of the ICa and the genu (ICg). The projection from LPMCv travelled through the genu and anterior portion of the posterior limb (ICp). The projection from LPMCd occupied the anterior portion of the ICp. The projection from M4 descended through the mid-portion of the ICp. Fibres from M1 also travelled in the ICp, positioned immediately posterior to the M4 projection. As each fibre system progressed inferiorly within the IC, all fibres shifted posteriorly to occupy the ICp. Within the ICp, the projections from M3, M2, LPMCv, LPMCd, M4 and M1 maintained their anterior to posterior orientation, respectively. M2, LPMCd and LPMCv fibres overlapped extensively, as did fibres from M4 and M1. Our data suggest that CR and superior capsular lesions may correlate with more favourable levels of functional recovery due to the widespread nature of arm representation. In contrast, the extensive overlap and comparatively condensed organization of arm representation at inferior capsular levels suggest that lesions seated inferiorly are likely to correlate with poorer levels of recovery of upper limb movement. Based on the relative density of corticospinal neurones associated with the motor areas studied, our findings also suggest that motor deficit severity is likely to increase as a lesion occupies progressively more posterior regions of the IC.