Compact computational spectrometer using a solid wedged low finesse etalon.

A novel, to the best of our knowledge, two-layer hybrid solid wedged etalon was fabricated and combined with a traditional imager to make a compact computational spectrometer. The hybrid wedge, comprised of ${{\rm Nb}_2}{{\rm O}_5}$ and Infrasil 302, was designed to operate from 0.4-2.4 µm. Initial demonstrations, however, used a complementary metal-oxide semiconductor (CMOS) imager and demonstrated operation from 0.4-0.9 µm with spectral resolutions ${\lt}\;{30}\;{{\rm cm}^{- 1}}$ from single snapshots. The computational spectrometer itself operates similarly to a spatial Fourier transform spectrometer (FTIR), but rather than use conventional Fourier-based methods or assumptions, the spectral reconstruction used a non-negative least-squares fitting algorithm based on analytically computed wavelength response vectors determined from extracted physical thicknesses across the entire two-dimensional wedge. This new computational technique resulted in performance and spectral resolutions exceeding those that could be achieved from Fourier processing techniques applied to this wedge etalon. With an additional imaging lens and translational scanning, the system can be converted into a hyperspectral imager.

Optimization of ultraviolet Raman spectroscopy for trace explosive checkpoint screening.

Raman spectroscopy has long been considered a gold standard for optically based chemical identification, but has not been adopted in non-laboratory operational settings due to limited sensitivity and slow acquisition times. Ultraviolet (UV) Raman spectroscopy has the potential to address these challenges through the reduction of fluorescence from background materials and increased Raman scattering due to the shorter wavelength (relative to visible or near-infrared excitation) and resonant enhancement effects. However, the benefits of UV Raman must be evaluated against specific operational situations: the actual realized fluorescence reduction and Raman enhancement depend on the specific target materials, target morphology, and operational constraints. In this paper, the wavelength trade-space in UV Raman spectroscopy is evaluated for one specific application: checkpoint screening for trace explosive residues. The optimal UV wavelength is evaluated at 244, 266, and 355 nm for realistic trace explosive and explosive-related compound (ERC) residues on common checkpoint materials: we perform semi-empirical analysis that includes the UV penetration depth of common explosive and ERCs, realistic explosive and ERC residue particle sizes, and the fluorescence signal of common checkpoint materials. We find that while generally lower UV wavelength provides superior performance, the benefits may be significantly reduced depending on the specific explosive and substrate. Further, logistical requirements (size, weight, power, and cost) likely limit the adoption of optimal wavelengths. Graphical abstract.

Photothermal speckle modulation for noncontact materials characterization.

We have developed a noncontact, photothermal materials characterization method based on visible-light speckle imaging. This technique is applied to remotely measure the infrared absorption spectra of materials and to discriminate materials based on their thermal conductivities. A wavelength-tunable (7.5-8.7 µm), intensity-modulated, quantum cascade pump laser and a continuous-wave 532 nm probe laser illuminate a sample surface such that the two laser spots overlap. Surface absorption of the intensity-modulated pump laser induces a time-varying thermoelastic surface deformation, resulting in a time-varying 532 nm scattering speckle field from the surface. The speckle modulation amplitude, derived from a series of visible camera images, is found to correlate with the amplitude of the surface motion. By tuning the pump laser's wavelength over a molecular absorption feature, the amplitude spectrum of the speckle modulation is found to correlate to the IR absorption spectrum. As an example, we demonstrate this technique for spectroscopic identification of thin polymeric films. Furthermore, by adjusting the rate of modulation of the pump beam and measuring the associated modulation transfer to the visible speckle pattern, information about the thermal time constants of surface and sub-surface features can be revealed. Using this approach, we demonstrate the ability to distinguish between different materials (including metals, semiconductors, and insulators) based on differences in their thermal conductivities.

Measurement of aerosol-particle trajectories using a structured laser beam.

What is believed to be a new concept for the measurement of micrometer-sized particle trajectories in an inlet air stream is introduced. The technique uses a light source and a mask to generate a spatial pattern of light within a volume in space. Particles traverse the illumination volume and elastically scatter light to a photodetector where the signal is recorded in time. The detected scattering waveform is decoded to find the particle trajectory. A design is presented for the structured laser beam, and the accuracy of the technique in determining particle position is demonstrated. It is also demonstrated that the structured laser beam can be used to measure and then correct for the spatially dependent instrument-response function of an optical-scattering-based particle-sizing system for aerosols.