Charge Carrier Induced Structural Ordering And Disordering in Organic Mixed Ionic Electronic Conductors.

Operational stability underpins the successful application of organic mixed ionic-electronic conductors (OMIECs) in a wide range of fields, including biosensing, neuromorphic computing, and wearable electronics. In this work, both the operation and stability of a p-type OMIEC material of various molecular weights are investigated. Electrochemical transistor measurements reveal that device operation is very stable for at least 300 charging/discharging cycles independent of molecular weight, provided the charge density is kept below the threshold where strong charge-charge interactions become likely. When electrochemically charged to higher charge densities, an increase in device hysteresis and a decrease in conductivity due to a drop in the hole mobility arising from long-range microstructural disruptions are observed. By employing operando X-ray scattering techniques, two regimes of polaron-induced structural changes are found: 1) polaron-induced structural ordering at low carrier densities, and 2) irreversible structural disordering that disrupts charge transport at high carrier densities, where charge-charge interactions are significant. These operando measurements also reveal that the transfer curve hysteresis at high carrier densities is accompanied by an analogous structural hysteresis, providing a microstructural basis for such instabilities. This work provides a mechanistic understanding of the structural dynamics and material instabilities of OMIEC materials during device operation.

Elastomeric vitrimers from designer polyhydroxyalkanoates with recyclability and biodegradability.

Cross-linked elastomers are stretchable materials that typically are not recyclable or biodegradable. Medium-chain-length polyhydroxyalkanoates (mcl-PHAs) are soft and ductile, making these bio-based polymers good candidates for biodegradable elastomers. Elasticity is commonly imparted by a cross-linked network structure, and covalent adaptable networks have emerged as a solution to prepare recyclable thermosets via triggered rearrangement of dynamic covalent bonds. Here, we develop biodegradable and recyclable elastomers by chemically installing the covalent adaptable network within biologically produced mcl-PHAs. Specifically, an engineered strain of Pseudomonas putida was used to produce mcl-PHAs containing pendent terminal alkenes as chemical handles for postfunctionalization. Thiol-ene chemistry was used to incorporate boronic ester (BE) cross-links, resulting in PHA-based vitrimers. mcl-PHAs cross-linked with BE at low density (<6 mole %) affords a soft, elastomeric material that demonstrates thermal reprocessability, biodegradability, and denetworking at end of life. The mechanical properties show potential for applications including adhesives and soft, biodegradable robotics and electronics.

High flux novel polymeric membrane for renal applications.

Biocompatibility and the ability to mediate the appropriate flux of ions, urea, and uremic toxins between blood and dialysate components are key parameters for membranes used in dialysis. Oxone-mediated TEMPO-oxidized cellulose nanomaterials have been demonstrated to be excellent additives in the production and tunability of ultrafiltration and dialysis membranes. In the present study, nanocellulose ionic liquid membranes (NC-ILMs) were tested in vitro and ex vivo. An increase in flux of up to two orders of magnitude was observed with increased rejection (about 99.6%) of key proteins compared to that of polysulfone (PSf) and other commercial membranes. NC-ILMs have a sharper molecular weight cut-off than other phase inversion polymeric membranes, allowing for high throughput of urea and a uremic toxin surrogate and limited passage of proteins in dialysis applications. Superior anti-fouling properties were also observed for the NC-ILMs, including a > 5-h operation time with no systemic anticoagulation in blood samples. Finally, NC-ILMs were found to be biocompatible in rat ultrafiltration and dialysis experiments, indicating their potential clinical utility in dialysis and other blood filtration applications. These superior properties may allow for a new class of membranes for use in a wide variety of industrial applications, including the treatment of patients suffering from renal disease.

All-Polyhydroxyalkanoate Triblock Copolymers via a Stereoselective-Chemocatalytic Route.

Biodegradable polyhydroxyalkanoate (PHA) homopolymers and statistical copolymers are ubiquitous in microbially produced PHAs, but the step-growth polycondensation mechanism the biosynthesis operates on presents a challenge to access well-defined block copolymers (BCPs), especially higher-order tri-BCP PHAs. Here we report a stereoselective-chemocatalytic route to produce discrete hard-soft-hard ABA all-PHA tri-BCPs based on the living chain-growth ring-opening polymerization of racemic (rac) 8-membered diolides (rac-8DLR; R denotes the two substituents on the ring). Depending on the composition of the soft B block, originated from rac-8DLR (R = Et, nBu), and its ratio to the semicrystalline, high-melting hard A block, derived from rac-8DLMe, the resulting all-PHA tri-BCPs with high molar mass (Mn up to 238 kg mol-1) and low dispersity (D = 1.07) exhibit tunable mechanical properties characteristic of a strong and tough thermoplastic, elastomer, or a semicrystalline thermoplastic elastomer.

Materials Combining Asymmetric Pore Structures with Well-Defined Mesoporosity for Energy Storage and Conversion.

Porous materials design often faces a trade-off between the requirements of high internal surface area and high reagent flux. Inorganic materials with asymmetric/hierarchical pore structures or well-defined mesopores have been tested to overcome this trade-off, but success has remained limited when the strategies are employed individually. Here, the attributes of both strategies are combined and a scalable path to porous titanium nitride (TiN) and carbon membranes that are conducting (TiN, carbon) or superconducting (TiN) is demonstrated. These materials exhibit a combination of asymmetric, hierarchical pore structures and well-defined mesoporosity throughout the material. Fast transport through such TiN materials as an electrochemical double-layer capacitor provides a substantial improvement in capacity retention at high scan rates, resulting in state-of-the-art power density (28.2 kW kg-1) at competitive energy density (7.3 W-h kg-1). In the case of carbon membranes, a record-setting power density (287.9 kW kg-1) at 14.5 W-h kg-1 is reported. Results suggest distinct advantages of such pore architectures for energy storage and conversion applications and provide an advanced avenue for addressing the trade-off between high-surface-area and high-flux requirements.

One-Pot Synthesis of Hierarchically Macro- and Mesoporous Carbon Materials with Graded Porosity.

Hierarchically porous materials are becoming increasingly important in catalysis, separation, and energy applications due to their advantageous diffusion and flux properties. Here we present the synthesis of hierarchically macro- and mesoporous carbon materials with graded porosity from a one-pot fabrication route. Organic-polymeric hybrids of a carbon precursor and poly(isoprene)-block-poly(styrene)-block-poly(4-vinylpyridine) with graded porosity are obtained via coassembly and nonsolvent-induced phase separation. The membranes were carbonized at temperatures as high as 1100 °C with simultaneous decomposition of the block copolymer. The carbon materials show an open nanoporous top surface with narrow pore-size distribution that opens up into a graded macroporous support with increasing macropore size along the film normal and mesoporous walls, providing for highly accessible porosity with a large surface area of over 500 m2 g-1. Further, we expand the direct synthesis process to form well-dispersed metal nanoparticles (such as nickel and platinum) on the graded, hierarchically porous carbon materials. Our one-pot synthesis offers a facile approach to graded macro- and mesoporous carbons.