ABSTRACT
The aim of the current research project was to explore the possibilities of combining pressurized carbon dioxide with hot stage extrusion during manufacturing of solid dispersions of the thermally labile p-aminosalicylic acid (p-ASA) and ethylcellulose 20cps (EC 20cps) and to evaluate the ability of the pressurized gas to act as a temporary plasticizer. The thermal stability of the p-ASA was investigated using DSC, TGA and HPLC. The compound decomposes completely upon melting. Below 110 degrees C and under atmospheric conditions, the compound is thermally stabile for 10min. Pressurized carbon dioxide was injected into a Leistritz Micro 18 intermeshing co-rotating twin-screw melt extruder using an ISCO 260D syringe pump. Carbon dioxide acted as plasticizer for p-ASA/EC 20cps, reducing the processing temperature during the hot stage extrusion process. HPLC showed that without carbon dioxide injection, approximately 17% of p-ASA degraded, while less than 5% degraded with CO(2) injection. The experiments clearly showed that injecting pressurized carbon dioxide broadens the application of hot stage extrusion to thermally labile compounds in a one step process.
Subject(s)
Aminosalicylic Acid/chemistry , Carbon Dioxide/chemistry , Cellulose/analogs & derivatives , Plasticizers/chemistry , Calorimetry, Differential Scanning , Cellulose/chemistry , Chromatography, High Pressure Liquid , Drug Compounding , Hot Temperature , ThermogravimetryABSTRACT
The aim of the current research project was to explore the possibilities of combining pressurized carbon dioxide with hot stage extrusion during manufacturing of solid dispersions of itraconazole and polyvinylpyrrolidone-co-vinyl acetate 64 (PVP-VA 64) and to evaluate the ability of the pressurized gas to act as a temporary plasticizer as well as to produce a foamed extrudate. Pressurized carbon dioxide was injected into a Leistritz Micro 18 intermeshing co-rotating twin-screw melt extruder using an ISCO 260D syringe pump. The physicochemical characteristics of the extrudates with and without injection of carbon dioxide were evaluated with reference to the morphology of the solid dispersion and dissolution behaviour and particle properties. Carbon dioxide acted as plasticizer for itraconazole/PVP-VA 64, reducing the processing temperature during the hot stage extrusion process. Amorphous dispersions were obtained and the solid dispersion was not influenced by the carbon dioxide. Release of itraconazole from the solid dispersion could be controlled as a function of processing temperature and pressure. The macroscopic morphology changed to a foam-like structure due to expansion of the carbon dioxide at the extrusion die. This resulted in increased specific surface area, porosity, hygroscopicity and improved milling efficiency.
Subject(s)
Acrylates/administration & dosage , Carbon Dioxide/administration & dosage , Itraconazole/administration & dosage , Plasticizers/administration & dosage , Pyrrolidinones/administration & dosage , Technology, Pharmaceutical , Vinyl Compounds/administration & dosage , Microscopy , Pyrrolidines , TemperatureABSTRACT
The objective of this study was to develop and characterize a biodegradable drug-loaded nerve guide for peripheral nerve regeneration. Sabeluzole, a nerve growth agent, was selected as model compound. Four biodegradable polymers were selected for this study: a copolymer of polylactic acid and polycaprolactone (PCL); a copolymer of polyglycolic acid and polycaprolactone PCL; a copolymer of PCL/polydioxanone (PDO) and PDO. Placebo and drug loaded nerve guides were obtained by melt compression and melt extrusion. It was observed that melt compression and melt extrusion are feasible techniques to prepare the nerve guides. Based on the physicochemical characterization, all samples show absence of crystalline sabeluzole, indicating the formation of an amorphous dispersion. The in vitro release measurements show that the release of sabeluzole is complete, reproducible and can be controlled by the proper selection of the polymer. The release mechanism for all samples follows Fickian release behaviour.
Subject(s)
Absorbable Implants , Body Fluids/chemistry , Drug Implants/chemistry , Lactic Acid/chemistry , Piperidines/administration & dosage , Piperidines/chemistry , Polyesters/chemistry , Polymers/chemistry , Thiazoles/administration & dosage , Thiazoles/chemistry , Animals , Biocompatible Materials , Diffusion , Drug Stability , Equipment Failure Analysis , Humans , Materials Testing , Nerve Growth Factors/administration & dosage , Nerve Growth Factors/chemistry , Nerve Regeneration/drug effects , Peripheral Nerve Injuries , Peripheral Nerves/drug effects , Peripheral Nerves/surgery , Prosthesis Design , TemperatureABSTRACT
Solid dispersions of PEG6000 and loperamide-a poorly water-soluble agent-were prepared by spray drying. Their physicochemical properties were evaluated immediately after preparation. The dissolution was higher than that of pure crystalline loperamide. DSC- and XRD-measurements revealed that in the dispersions, loperamide is partially present in the crystalline state. A eutectic state diagram was obtained. The samples containing 20% loperamide were stored under different conditions (40 degrees C and 0% RH, 25 degrees C and 52% RH, 4 degrees C and 0% RH) to investigate their stability as a function of time. The dissolution properties deteriorate upon storage at high temperature (40 degrees C and 0% RH) and in conditions of higher relative humidity (25 degrees C and 52% RH). The DSC-curves clearly indicate an increase in the amount of crystalline compound under these conditions. From these observations it could be concluded that loperamide, which is partially crystalline and partially amorphous in the freshly prepared samples, continues to crystallize under these conditions, resulting in progressively poorer dissolution properties.
