ABSTRACT
TiAl6V4 wrought alloy is a standard material used for endoprostheses due to its ideal characteristics in terms of osseointegration. However, the insufficient wear and crevice corrosion resistance of TiAl6V4 are limiting factors that can cause clinical problems. Therefore, the objective of this study was to analyze and identify suitable phases and microstructural states of TiAl6V4 alloy with advantageous implant properties by thermal treatments. By varying the temperature and cooling rate, four heat treatment strategies were derived that produced different microstructural states that differed in morphology, arrangement and proportions of phases present. All TiAl6V4 modifications were characterized regarding their microstructure, mechanical, corrosive and tribological properties, as well as cell adhesion. The acicular, martensitic microstructure achieves a significant hardness increase by up to 63% and exhibits improved corrosion and wear resistance compared to the forged condition. Whereas the modified microstructures showed similar electrochemical properties in polarization tests using different electrolytes (PBS with H2O2 and HCl additives), selective α or ß phase dissolution occurred under severe inflammatory crevice conditions after four weeks of exposure at 37 °C. The microstructurally selective corrosion processes resemble the damage patterns of retrieved Ti-based implants and provide a better understanding of clinically relevant in vivo crevice corrosion mechanisms. Furthermore, a microstructural effect on cell attachment was determined and is correlated to the size of the vanadium-rich ß phase. These key findings highlight the relevance of an adapted processing of TiAl6V4 alloy to increase the longevity of implants.
ABSTRACT
Fretting corrosion is associated with increased risk of premature implant failure. In this complex in vivo corrosion system, the contribution of static crevice corrosion of the joined metal alloys is still unknown. The aim of this study was to develop a methodology for testing crevice corrosion behavior that simulates the physiological conditions of modular taper junctions and to identify critical factors on corrosion susceptibility. Samples of medical grade CoCr28Mo6 cast and wrought alloy, TiAl6V4 wrought alloy and REX 734 stainless steel were prepared metallographically and the microstructure was investigated using scanning electron microscopy (SEM). Crevice formers that mimic typical geometries of taper junctions were developed. Crevice corrosion immersion tests were performed in different physiological fluids (bovine serum or phosphate buffered saline with additives of 30 mM H2 O2 at pH = 1) for 4 weeks at 37°C. SEM with energy dispersive X-ray spectroscopy as well as focused ion beam were used to characterize the surface morphology, investigate present damages and identify the chemical composition of residues. Macroscopic inspection showed increased crevice corrosion susceptibility of TiAl6V4 and REX 734 under severe simulated inflammatory conditions. CoCr28Mo6 cast alloy exhibited degraded areas next to Cr- and Mo-rich precipitations that were located within the opposed crevices. The results indicate that aggressive electrolyte composition and crevice heights of 50-500 µm are critical influencing factors on crevice corrosion of biomedical alloys. Furthermore, manufacturing-related microstructure of common implant alloys determines the deterioration of corrosion resistance. The developed method should be used to enhance the corrosion resistance of common implant biomaterials by an adapted microstructure.
Subject(s)
Alloys , Stainless Steel , Corrosion , Dental Materials , Materials Testing , Prostheses and Implants/adverse effects , Stainless Steel/chemistryABSTRACT
The introduction of novel bioactive materials to manipulate living cell behavior is a crucial topic for biomedical research and tissue engineering. Biomaterials or surface patterns that boost specific cell functions can enable innovative new products in cell culture and diagnostics. This study investigates the influence of the intrinsically nano-patterned surface of nanoporous glass membranes on the behavior of mammalian cells. Three different cell lines and primary human mesenchymal stem cells (hMSCs) proliferate readily on nanoporous glass membranes with mean pore sizes between 10 and 124 nm. In both proliferation and mRNA expression experiments, L929 fibroblasts show a distinct trend toward mean pore sizes >80 nm. For primary hMSCs, excellent proliferation is observed on all nanoporous surfaces. hMSCs on samples with 17 nm pore size display increased expression of COL10, COL2A1, and SOX9, especially during the first two weeks of culture. In the upside down culture, SK-MEL-28 cells on nanoporous glass resist the gravitational force and proliferate well in contrast to cells on flat references. The effect of paclitaxel treatment of MDA-MB-321 breast cancer cells is already visible after 48 h on nanoporous membranes and strongly pronounced in comparison to reference samples, underlining the material's potential for functional drug screening.
Subject(s)
Nanopores , Animals , Biocompatible Materials , Cell Culture Techniques , Glass , Humans , Tissue EngineeringABSTRACT
Wear of orthopaedic endoprostheses is associated with adverse local and systemic reactions and can lead to early implant failure. Manufacturing determines the initial subsurface microstructure of an alloy that influences the implant's wear behaviour. Therefore, this study aims at generating enhanced wear resistances by a modification of the surface and subsurface microstructure of a CoCr28Mo6 wrought alloy by applying deep rolling. The state of the art was investigated by means of eleven retrieved CoCr28Mo6 hip implant components from different manufacturers with respect to their subsurface microstructure and micro hardness profiles. CoCr28Mo6 wrought alloy samples (DIN EN ISO 5832-12) were aged at 750 °C for 24 h and/or plastically deformed by deep rolling with varying axial forces (170 N, 230 N and 250 N). The samples were metallographically prepared and investigated using optical and scanning electron microscopy with EDS and EBSD, micro hardness testing, XRD and tribological testing. The retrieved implant components revealed that, independent of the manufacturer, neither the head nor the stem trunnion exhibited a defined subsurface condition. The dominant phase within the implants was face-centered cubic (fcc). Some implants exhibited single hexagonal close-packed (hcp) grains due to a stress-induced phase transformation. The initial CoCr28Mo6 wrought alloy had a fcc crystal structure. After isothermal aging, the matrix entirely transformed to a hcp structure. In the initial fcc-condition, deep rolling generated a plastically deformed surface layer within the first 100 µm and stress-induced phase transformation to hcp was observed. Micro hardness gradients were present in the subsurface of up to 600 µm depth and exhibited a maximum increase of 34% by deep rolling in comparison to the initial fcc-matrix. This trend was confirmed by a correlated increase in residual compressive stresses. In tribological tests under serum lubrication, the modified samples generated lower wear in comparison to the contemporarily used fcc-matrix samples. This study demonstrates that deep rolling is an effective processing to modify the subsurface of a biomedical CoCr28Mo6 wrought alloy in order to increase the wear resistance. The intentional transformation from the fcc to the hcp phase induced by deformation offers great potential for implant application.