Electrochemical aptasensor of cellular prion protein based on modified polypyrrole with redox dendrimers.

This work consists of the development of an electrochemical aptasensor based on polyprrole modified with redox dendrimers, able to detect human cellular prions PrP(C) with high sensitivity. The gold surface was modified by conductive polypyrrole film coupled to polyamidoamine dendrimers of fourth generation (PAMAM G4) and ferrocenyl group as redox marker. The aptamers were immobilized on the surface via biotin/streptavidin chemistry. Electrochemical signal was detected by ferrocenyl group incorporated between dendrimers and aptamers layers. We demonstrated that the interaction between aptamer and prion protein led to variation in electrochemical signal of the ferrocenyl group. The kinetics parameters (diffusion coefficient D and heterogeneous constant transfer ket) calculated from electrochemical signals demonstrate that the variation in redox signal results from the lower diffusion process of ions during redox reaction after prion interaction due to bulk effect of larger protein. The association of redox dendrimers with conducting polypyrrole leads to high sensitivity of PrP(C) determination with detection limit of 0.8 pM, which is three orders of magnitude lower, compared to flat ferrocene-functionalized polypyrrole. Detection of PrP(C) in spiked blood plasma has been achieved and demonstrated a recovery up to 90%.

Binding kinetics of human cellular prion detection by DNA aptamers immobilized on a conducting polypyrrole.

We developed a biosensor based on the surface plasmon resonance (SPR) method for the study of the binding kinetics and detection of human cellular prions (PrP(C)) using DNA aptamers as bioreceptors. The biosensor was formed by immobilization of various biotinylated DNA aptamers on a surface of conducting polypyrrole modified by streptavidin. We demonstrated that PrP(C) interaction with DNA aptamers could be followed by measuring the variation of the resonance angle. This was studied using DNA aptamers of various configurations, including conventional single-stranded aptamers that contained a rigid double-stranded supporting part and aptamer dimers containing two binding sites. The kinetic constants determined by the SPR method suggest strong interaction of PrP(C) with various DNA aptamers depending on their configuration. SPR aptasensors have a high selectivity to PrP(C) and were regenerable by a brief wash in 0.1 M NaOH. The best limit of detection (4 nM) has been achieved with this biosensor based on DNA aptamers with one binding site but containing a double-stranded supporting part.

The study of the interaction of (cytosine-5)-DNA methyltransferase SsoII with DNA by acoustic method.

The interaction of (cytosine-5)-DNA methyltransferase SsoII (M.SsoII) with double-stranded DNA was studied by means of thickness shear mode acoustic method (TSM) and gel electrophoresis. M.SsoII recognizes in double-stranded DNA the methylation site 5'-CCNGG-3' (N=A, C, G, T) and methylates the inner cytosine residue. M.SsoII also acts as a transcription factor via binding to the regulatory site 5'-AGGACAAATTGTCCT-3' in the promoter region of SsoII restriction-modification system. We designed three 60-mer biotinylated DNA duplexes: with the methylation site (60met), with the regulatory site (60reg), and without a specific binding site (60oct). A strong binding of M.SsoII with each one of the studied DNA immobilized on the TSM transducer has been shown. The equilibrium dissociation constants, K(D), of the M.SsoII-DNA complexes decreased in the order 60oct>60reg>60met, suggesting a higher stability of M.SsoII-60met complex in comparison with the others. The association rate constant, k(a), was also higher for 60met, while similar values were obtained for 60reg and 60oct. The difference in the kinetic parameters for 60met and 60reg suggested a possible way of coordination between the two M.SsoII functions in a cell.

Interaction of cationic surfactants with DNA detected by spectroscopic and acoustic wave techniques.

Interaction of the cationic surfactants benzalkonium chloride and 1-hexadecylpyridinium chloride, in the concentration range 0.1 microM to 1 mM with calf thymus DNA and with short 19-mer double-stranded DNA has been examined in solution using UV absorption and fluorescent spectroscopies and at the liquid-solution interface by thickness-shear mode acoustic wave sensor. Higher concentrations of surfactant resulted in an increase of UV absorption, and decrease of melting temperature and van't Hoff enthalpy of calf thymus DNA. Both surfactants induce fluorescence quenching of ethidium bromide which is also associated with intercalation of the molecules into the nucleic acid strand. The effect of the pyridinium compound is greater than for the other surfactant likely because of the lower size of polar head group in this molecule. With respect to acoustic wave detection at the device surface, for relatively low surfactant concentrations (below 100 microM), decreases of both series resonant frequency and motional resistance were observed. At higher surfactant concentration both parameters increased. These effects are attributed to acoustic coupling processes that occur at the device-film/liquid boundary.

EQCM biosensors based on DNA aptamers and antibodies for rapid detection of prions.

Novel affinity biosensors for detecting cellular prions, PrP(C), based on DNA aptamers and antibodies immobilized onto the carbon nanotubes have been designed and compared in accordance with their binding ability and analytical performance. The biosensors allowed us to detect PrP(C) with the limits of detection of 20 to 50 pM.

Detection of DNA damage: effect of thymidine glycol residues on the thermodynamic, substrate and interfacial acoustic properties of oligonucleotide duplexes.

Thymidine glycol residues in DNA are biologically active oxidative molecular damage sites caused by ionizing radiation and other factors. One or two thymidine glycol residues were incorporated in 19- to 31-mer DNA fragments during automatic oligonucleotide synthesis. These oligonucleotide models were used to estimate the effect of oxidized thymidines on the thermodynamic, substrate and interfacial acoustic properties of DNA. UV-monitoring melting data revealed that modified residues in place of thymidines destabilize the DNA double helix by 8-22 degrees C, depending on the number of lesions, the length of oligonucleotide duplexes and their GC-content. The diminished hybridizing capacity of modified oligonucleotides is presumably due to the loss of aromaticity and elevated hydrophilicity of thymine glycol in comparison to the thymine base. According to circular dichroism (CD) data, the modified DNA duplexes retain B-form geometry, and the thymidine glycol residue introduces only local perturbations limited to the lesion site. The rate of DNA hydrolysis by restriction endonucleases R.MvaI, R.Bst2UI, R.MspR9I and R.Bme1390I is significantly decreased as the thymidine glycol is located in the central position of the double-stranded recognition sequences 5'-CC / WGG-3' (W = A, T) or 5'-CC / NGG-3' (N = A, T, G, C) adjacent to the cleavage site. On the other hand, the catalytic properties of enzymes R.Psp6I and R.BstSCI recognizing the similar sequence are not changed dramatically, since their cleavage site is separated from the point of modification by several base-pairs. Data obtained by gel-electrophoretic analysis of radioactive DNA substrates were confirmed by direct spectrophotometric assay developed by the authors. The effect of thymidine glycol was also observed on DNA hybridization at the surface of a thickness-shear mode acoustic wave device. A 1.9-fold decrease in the rate of duplex formation was noted for oligonucleotides carrying one or two thymidine glycol residues in relation to the unmodified analog.

Aptabodies - new type of artificial receptors for detection proteins.

We report on a new type of artificial receptor formed by hybridization of two DNA aptamers for human thrombin (aptabody). This aptasensor based on multiwalled carbon nanotubes allowed us to detect thrombin with detection limit of 0.3 nM, which was 3 times better in comparison with conventional aptamer.

[Synthesis and characteristics of modified DNA fragments containing thymidine glycol residues].

Chemical synthesis of a series of modified oligodeoxyribonucleotides containing one or two residues of thymidine glycol (5,6-dihydro-5,6-dihydroxythymidine), the main product of oxidative DNA damage, is described. The thermal stability of DNA duplexes containing thymidine glycol residues was studied using UV spectroscopy. Introduction of even one thymidine glycol residue into the duplex structure was shown to result in its significant destabilization. Data on the interaction of DNA methyltransferases and type II restriction endonucleases with DNA ligands containing oxidized thymine were obtained for the first time. Introduction of a thymidine glycol residue into the central degenerate position of the recognition site of restriction endonuclease SsoII was found to result in an increase in the initial hydrolysis rate of the modified duplex in comparison with that of the unmodified structure. The affinity of C5-cytosine methyltransferase SsoII for the DNA duplex bearing thymidine glycol was found to be twofold higher than for the unmodified substrate. However, such a modification of the DNA ligand prevents its methylation. The English version of the paper: Russian Journal of Bioorganic Chemistry, 2008, vol. 34, no. 2; see also http://www.maik.ru.

The study of surface properties of an IgE-sensitive aptasensor using an acoustic method.

We applied the acoustic transverse shear mode (TSM) method for study of the surface properties of a DNA aptasensor that specifically binds human immunoglobulin E (IgE). The biotinylated 45-mer DNA aptamers were immobilized on the surface of a self-assembled layer composed of a mixture of polyamidoamine dendrimers of the fourth generation with 1-hexadecanetiol covered by neutravidin. Using the TSM method, we studied the kinetics of changes of the series resonant frequency, f(s), and the motional resistance, R(m), of a quartz crystal transducer, used as a support for formation of the sensing layer. We have shown that attachment of the biotinylated DNA aptamers onto the surface covered by neutravidin results in a decrease of f(s), but in an increase of R(m). Similar changes of f(s) and R(m) were observed following addition of IgE. This suggests the contribution of friction forces to the crystal oscillation, which was taken into account in the calculation of the mass changes at the sensor surface following binding processes.

Studies of the minimum hydrophobicity of alpha-helical peptides required to maintain a stable transmembrane association with phospholipid bilayer membranes.

The effects of the hydrophobicity and the distribution of hydrophobic residues on the surfaces of some designed alpha-helical transmembrane peptides (acetyl-K2-L(m)-A(n)-K2-amide, where m + n = 24) on their solution behavior and interactions with phospholipids were examined. We find that although these peptides exhibit strong alpha-helix forming propensities in water, membrane-mimetic media, and lipid model membranes, the stability of the helices decreases as the Leu content decreases. Also, their binding to reversed phase high-performance liquid chromatography columns is largely determined by their hydrophobicity and generally decreases with decreases in the Leu/Ala ratio. However, the retention of these peptides by such columns is also affected by the distribution of hydrophobic residues on their helical surfaces, being further enhanced when peptide helical hydrophobic moments are increased by clustering hydrophobic residues on one side of the helix. This clustering of hydrophobic residues also increases peptide propensity for self-aggregation in aqueous media and enhances partitioning of the peptide into lipid bilayer membranes. We also find that the peptides LA3LA2 [acetyl-K2-(LAAALAA)3LAA-K2-amide] and particularly LA6 [acetyl-K2-(LAAAAAA)3LAA-K2-amide] associate less strongly with and perturb the thermotropic phase behavior of phosphatidylcholine bilayers much less than peptides with higher L/A ratios. These results are consistent with free energies calculated for the partitioning of these peptides between water and phospholipid bilayers, which suggest that LA3LA2 has an equal tendency to partition into water and into the hydrophobic core of phospholipid model membranes, whereas LA6 should strongly prefer the aqueous phase. We conclude that for alpha-helical peptides of this type, Leu/Ala ratios of greater than 7/17 are required for stable transmembrane associations with phospholipid bilayers.

Study of calix[4]resorcinarene-dopamine complexation in mixed phospholipid monolayers formed at the air-water interface.

We have studied the physical properties of monolayers formed by calix[4]resorcinarene and in mixtures with dipalmitoyl phosphatidylcholine (DPPC) in various molar ratios formed at the air-water interface and at presence of dopamine in water subphase by means of measurements of surface pressure and dipole potential. We showed that both calix[4]resorcinarene as well as its mixture with DPPC form stable monolayers at the water subphase. The presence of dopamine resulted in an increase of the mean molecular area and in a decrease of the compressibility modulus of the monolayers. For mixed monolayers at higher content of calix[4]resorcinarene (> 0.2 molar fraction) a deviation from ideal miscibility took place especially for monolayers in a solid state. This can be connected with formation of aggregates of calix[4] resorcinarene. Lowest miscibility and weakest interaction of dopamine with a monolayer was observed for calix[4]resorcinarene molar fraction of 0.33 in the monolayer.

DNA-duplexes containing abasic sites: correlation between thermostability and acoustic wave properties.

Aldehydic apurinic or apyrimidinic sites that lack a nucleobase moiety are one of the most common forms of toxic lesions in DNA. In the present study, a close structural analog of such a site, the 2-(hydroxymethyl) tetrahydrofuranyl residue, was synthesized in order to act as a model for damaged nucleic acid probes. Prepared oligodeoxyribonucleotides containing one, two or three abasic sites were hybridized to complementary sequences immobilized on a gold surface using the neutravidin-biotin interaction for study by thickness shear mode acoustic wave detector. Measurement of the complex electrical impedance of an AT-cut quartz device with immobilized biotinylated nucleotide allowed the detection of changes of series resonance frequency, Deltafs, and motional resistance, Rm, associated with duplex formation. The changes as detected by the acoustic wave method correlated well with the thermostability of DNA duplexes in solution. With respect to the latter, UV-monitored melting curves indicate that both the number of sites and their localization in the double-stranded structure influence the amount by which a 19 b.p. duplex is destabilized. The presence of 3 abasic sites completely destabilized the DNA duplex.

The detection of DNA deamination by electrocatalysis at DNA-modified electrodes.

The method of electrocatalysis based on using a methylene blue (MB) as an electrochemical indicator and ferricyanide ions [Fe(CN)6]3- as an electron acceptor was applied in screening DNA for lesions caused by deamination of nucleobases. The damaged DNA was modeled by short 18-mer oligonucleotides containing the different number of mismatched target bases (uracil instead of cytosine residues). The hybridization capacity of these oligomers with complementary probes (immobilized on gold electrodes or free) was investigated by both electrochemical methods and UV spectroscopy. We have shown that the amplitude of the reduction signal corresponding to ferricyanide ions considerably increases in the presence of MB. This electrocatalytic effect allowed us to detect the changes in electrochemical properties of DNA caused by dU.dG mismatches. Using differential pulse voltammetry and cyclic voltammetry, we showed that the electron transport from the electrode through the double-stranded DNA to MB and then to ferricyanide ions is suppressed by the mismatches in duplex structure. According to UV-monitored melting data, single or multiple wobble dU.dG base pairs destabilize 18-mer DNA duplex by 9-27 degrees C.

The study of the interaction of a model alpha-helical peptide with lipid bilayers and monolayers.

We studied the interaction of the alpha-helical peptide acetyl-Lys(2)-Leu(24)-Lys(2)-amide (L(24)) with tethered bilayer lipid membranes (tBLM) and lipid monolayers formed at an air-water interface. The interaction of L(24) with tBLM resulted in adsorption of the peptide to the surface of the bilayer, characterized by a binding constant K(c)=2.4+/-0.6 microM(-1). The peptide L(24) an induced decrease of the elasticity modulus of the tBLM in a direction perpendicular to the membrane surface, E(radial). The decrease of E(radial) with increasing peptide concentration can be connected with a disordering effect of the peptide to the tBLM structure. The pure peptide formed a stable monolayer at the air/water interface. The pressure-area isotherms were characterized by a transition of the peptide monolayer, which probably corresponds of the partial intercalation of the alpha-helixes at higher surface pressure. Interaction of the peptide molecules with lipid monolayers resulted in an increase of the mean molecular area of phospholipids both in the gel and liquid crystalline states. With increasing peptide concentration, the temperature of the phase transition of the monolayer shifted toward lower temperatures. The analysis showed that the peptide-lipid monolayer is not an ideally miscible system and that the peptide molecules form aggregates in the monolayer.

Properties of mixed alkanethiol-dendrimer layers and their applications in biosensing.

We studied the properties of mixed alkanethiol-dendrimer layers on a gold support and their application in biosensing. We showed that properties of glucose sensor can be modified using a different ratio of 1-hexadecanethiol (HDT) and poly(amidoamine) dendrimer of first generation (G1). The cyclic voltammetry in the presence of the redox couple, Fe(CN)(6)(3-)/Fe(CN)(6)(4-), was used for estimating how effectively the layer blocks the redox probe's access to the electrode surface. A scanning electrochemical microscope (SECM) was used to image the resulting distribution of the organic compounds. We found that with increasing content of dendrimers, the integrity of the layers was improved.

Changes of compressibility of low density lipoproteins following copper mediated oxidation.

The methods of measuring the ultrasound velocity and density were used for study the adiabatic compressibility of low density lipoproteins (LDL) during their oxidation. We showed, that copper-mediated oxidation of LDL resulted in a decrease of apparent specific compressibility, phi(k)/beta0, of lipoproteins. The changes of ultrasound velocity and phi(k)/beta0 value started much earlier than the beginning of propagation phase corresponding to the fast increase in concentration of conjugated dienes, measured by absorption at 230 nm. It was assumed that the changes of compressibility could be in particularly due to increase in ordering of the phospholipids during reductive activation of Cu2+.

Hybridization of DNA at the surface of phospholipid monolayers. Effect of orientation of oligonucleotide chains.

We studied the properties of lipid monolayers formed at the air-water interface composed of dioleoylphosphatidylcholine (DOPC) with incorporated short (19-mer) oligonucleotides. These oligonucleotides were modified by oleylamine at both (3' and 5') terminals or only at one (3') terminal. Interaction of single-stranded (19-mer) oligonucleotides without oleylamine with DOPC monolayers resulted only in slight increase of surface pressure and the area per phospholipid molecule, while more substantial and significant increase of these values were observed following incorporation of oligonucelotides modified by oleylamine. This influence is similar for both types of oligonucleotide modifications. However, considerable differences in changes of monolayer properties took place after hybridization with complementary oligonucleotides. The hybridization of oligonucleotides with the DNA modified by oleic acid at both 3' and 5' terminals at the surface of lipid monolayer resulted in further increase of surface pressure and in the increase of the area per phospholipid molecule, while decrease of both the surface pressure and the area per phospholipid molecules were observed for hybridization with DNA modified by oleic acid at 3' terminal. It is possible that in latter case, the hybridization caused the loss of hybridized molecules from monolayers. Interaction of noncomplementary chains with DOPC monolayers with incorporated oleyl acid-modified DNA also influenced the properties of monolayers, but the effect was weaker in comparison with that observed for complementary chains.

Effects of oxidation on changes of compressibility of bovine serum albumin.

The methods of ultrasound velocity and density measurements were used to study the adiabatic compressibility of bovine serum albumin (BSA) during its oxidation by the prooxidants Cu2+ and 2,2'-azobis(2-amidinopropane) hydrochloride (AAPH). We did not find changes of compressibility of BSA in the presence of copper ions at rather high molar ratio Cu2+/BSA = 0.66 mol/mol. This can be explained by binding of the Cu2+ to the binding site of BSA and thus protecting the prooxidant action of the copper. However, AAPH-mediated oxidation of BSA resulted in an increase of its apparent specific compressibility (psik/beta0). These changes could be caused by the fragmentation of the protein.

Electrostriction of supported lipid films at presence of cationic surfactants, surfactant-DNA and DNA-Mg(2+) complexes.

The method of electrostriction has been applied to study the physical properties of supported lipid membranes (sBLM) during membrane formation at application of negative potential. Application of negative potential -350 mV to the sBLM during its formation resulted in more compact membrane structure as revealed by higher elastic modulus in comparison with sBLM formed without application of this potential. We also studied interaction with sBLM cationic surfactant hexadecylamine (HDA), HDA-DNA and DNA-Mg(2+) complexes. Interaction of HDA with sBLM resulted in decrease of membrane capacitance and two-directional effect on elasticity modulus (increase or decrease), which can be caused by different aggregation state of surfactant at the surface of sBLM. In contrast with effect of HDA, the complexes of HDA-DNA resulted, in most cases, increase of elasticity modulus and increase of membrane capacitance, which can be caused by incorporation of these complexes into the hydrophobic interior of the membrane. Certain part of these complexes can, however, be adsorbed on the sBLM surface. DNA itself does not cause substantial changes of physical properties of sBLM; however, addition of bivalent cations Mg(2+) to the electrolyte-contained DNA caused substantial increase of elasticity modulus and surface potential. These changes are, however, much slower than that observed for HDA-DNA complexes, which can be caused by slow competitive exchange between Na(+) and Mg(2+) ions.

Properties of glucose biosensors based on dendrimer layers. Effect of enzyme immobilization.

The properties of glucose biosensors based on dendrimer layers on a gold support, which depend on the method of immobilization of glucose oxidase (GOX), were studied by amperometry. The kinetic parameters of enzymatic reactions, response time, sensitivity, detection limit, linear range, and enzyme turnover were determined. We showed that a more stable and sensitive sensor was obtained when GOX was immobilized on the dendrimer by crosslinking with glutaraldehyde in vacuum. This biosensor was stable for at least eight weeks. The response time was approximately 1.3 min, the detection limit of glucose was 25 micro M, and the apparent Michaelis-Menten constant was relative low ( K(m)=1.1+/-0.1 mM) in comparison with that for GOX in solution. The reason for these differences is discussed. The example of the application of the developed biosensors for the detection of mercury is also presented. The inhibitory effect of mercury on GOX activity was observed at mercury concentration of 100 nM.