Ester formation at the liquid-solid interface.

A chemical reaction (esterification) within a molecular monolayer at the liquid-solid interface without any catalyst was studied using ambient scanning tunneling microscopy. The monolayer consisted of a regular array of two species, an organic acid (trimesic acid) and an alcohol (undecan-1-ol or decan-1-ol), coadsorbed out of a solution of the acid within the alcohol at the interface of highly oriented pyrolytic graphite (HOPG) (0001) substrate. The monoester was observed promptly after reaching a threshold either related to the increased packing density of the adsorbate layer (which can be controlled by the concentration of the trimesic acid within the alcoholic solution via sonication or extended stirring) or by reaching a threshold with regards to the deposition temperature. Evidence that esterification takes place directly at the liquid-solid interface was strongly supported.

(Metallo)porphyrins for potential materials science applications.

The bottom-up approach to replace existing devices by molecular-based systems is a subject that attracts permanently increasing interest. Molecular-based devices offer not only to miniaturize the device further, but also to benefit from advanced functionalities of deposited molecules. Furthermore, the molecules itself can be tailored to allow via their self-assembly the potential fabrication of devices with an application potential, which is still unforeseeable at this time. Herein, we review efforts to use discrete (metallo)porphyrins for the formation of (sub)monolayers by surface-confined polymerization, of monolayers formed by supramolecular recognition and of thin films formed by sublimation techniques. Selected physical properties of these systems are reported as well. The application potential of those ensembles of (metallo)porphyrins in materials science is discussed.

Role of the deposition temperature on the self-assembly of the non-planar molecule benzene-1,3,5-triphosphonic acid (BTP) at the liquid-solid interface.

Benzene-1,3,5-triphosphonic acid (BTP) contains three non-planar phosphonic acid groups which enable three-dimensional hydrogen bonding. Because of these versatile 3D functional groups, BTP is an interesting intermediate to design both 2D and 3D supramolecular hydrogen-bonded architectures and organic-inorganic hybrid frameworks. However, the adsorption of BTP has surprisingly not been the subject of scanning tunneling microscopy (STM) investigations so far. Here a STM study of the adsorption pattern of BTP as obtained from deposition out of a solution in undecanol on an interface to highly-oriented pyrolytic graphite (HOPG) is presented. Furthermore, the influence of the substrate temperature during the deposition from solution on the self-assembly is investigated. High-resolution STM images reveal that the BTB molecules usually form various structures by co-adsorption with undecanol and that the BTP molecules as parts of self-assembled aggregates adsorb with their benzene ring planes tilted with respect to the substrate plane. The specific supramolecular pattern and the 2D packing density of BTP can be precisely tuned by adjusting the initial substrate temperature during deposition. The experimental results are compared to corresponding model structures obtained from semi-empirical simulations and explained by the influence of temperature on the concentration at the solution-solid interface and the kinetics of the self-assembly process. Based on these results, the control of the deposition substrate temperature has been proven to be a versatile tool to control the polymorphism of molecular patterns deposited out of solutions.

Surface- and tip-enhanced Raman spectroscopy reveals spin-waves in iron oxide nanoparticles.

Nanomaterials have the remarkable characteristic of displaying physical properties different from their bulk counterparts. An additional degree of complexity and functionality arises when oxide nanoparticles interact with metallic nanostructures. In this context the Raman spectra due to plasmonic enhancement of iron oxide nanocrystals are here reported showing the activation of spin-waves. Iron oxide nanoparticles on gold and silver tips are found to display a band around 1584 cm(-1) attributed to a spin-wave magnon mode. This magnon mode is not observed for nanoparticles deposited on silicon (111) or on glass substrates. Metal-nanoparticle interaction and the strongly localized electromagnetic field contribute to the appearance of this mode. The localized excitation that generates this mode is confirmed by tip-enhanced Raman spectroscopy (TERS). The appearance of the spin-waves only when the TERS tip is in close proximity to a nanocrystal edge suggests that the coupling of a localized plasmon with spin-waves arises due to broken symmetry at the nanoparticle border and the additional electric field confinement. Beyond phonon confinement effects previously reported in similar systems, this work offers significant insights on the plasmon-assisted generation and detection of spin-waves optically induced.

Surface-confined 2D polymerization of a brominated copper-tetraphenylporphyrin on Au(111).

A coupling-limited approach for the Ullmann reaction-like on-surface synthesis of a two-dimensional covalent organic network starting from a halogenated metallo-porphyrin is demonstrated. Copper-octabromo-tetraphenylporphyrin molecules can diffuse and self-assemble when adsorbed on the inert Au(111) surface. Splitting-off of bromine atoms bonded at the macrocyclic core of the porphyrin starts at room temperature after the deposition and is monitored by X-ray photoelectron spectroscopy for different annealing steps. Direct coupling between the reactive carbon sites of the molecules is, however, hindered by the molecular shape. This leads initially to an ordered non-covalently interconnected supramolecular structure. Further heating to 300 °C and an additional hydrogen dissociation step is required to link the molecular macrocycles via a phenyl group and form large ordered polymeric networks. This approach leads to a close-packed covalently bonded network of overall good quality. The structures are characterized using scanning tunneling microscopy. Different kinds of lattice defects and, furthermore, the impact of polymerization on the HOMO-LUMO gap are discussed. Density functional theory calculations corroborate the interpretations and give further insight into the adsorption of the debrominated molecule on the surface and the geometry and coupling reaction of the polymeric structure.

Copper(II) and triphenylphosphine copper(I) ethylene glycol carboxylates: synthesis, characterisation and copper nanoparticle generation.

Ethylene glycol-functionalised copper(II) carboxylates Cu[O2CCR2(OC2H4)nOCH3]2 (n = 0-3; R = H, Me) (2a-e) have been prepared by the reaction of [Cu2(OAc)4·2H2O] with CH3O(C2H4O)nCR2CO2H (1a-e). Upon reduction of 2a-e with triphenylphosphine, the corresponding tris(triphenylphosphine)copper(I) complexes 3a-e were obtained, which could be converted to the bis(triphenylphosphine)copper(I) complexes 4a-e by removal of one phosphine ligand. Based on IR spectroscopy and single crystal X-ray structure analysis the binding motif of the carboxylato group on the copper ion is discussed. DSC, TG and TG-MS experiments were performed to analyse the thermal decomposition mechanism of 2-4. Complex 4c was used as a precursor for the generation of copper nanoparticles by thermal decomposition in hexadecylamine without the need of any further reactants. Depending on the precursor concentration, spherical copper nanoparticles with a mean diameter ranging from 10 to 85 nm as well as nanorods with a length of up to 1.3 µm (aspect ratios ranging between 2 and 32) were obtained. Electron diffraction analysis of the rods suggested that they consist of five domains which are arranged around a fivefold rotational axis.

A straightforward approach to oxide-free copper nanoparticles by thermal decomposition of a copper(I) precursor.

The synthesis of the novel copper(I) precursor [Cu(PPh3)2(O2CCH2OC2H4OC2H4OCH3)] and its application in the straightforward solution synthesis of oxide-free copper nanoparticles by mere thermal decomposition are reported; depending on the precursor concentration particles of sizes of 10 nm or 30 nm are obtained in narrow size distributions.

Nonaqueous atomic layer deposition of aluminum phosphate.

Aluminum phosphate was deposited onto bundles of carbon fibers and flat glassy carbon substrates using atomic layer deposition by exposing them to alternating pulses of trimethylaluminum and triethylphosphate vapors. Energy dispersive X-ray spectroscopy (EDXS) and solid state nuclear magnetic resonance (SS-NMR) spectra confirmed that the coating comprises aluminum phosphate (orthophosphate as well as other stoichiometries). Scanning electron microscopic (SEM) images revealed that the coatings are uniform and conformal. After coating, the fibers are still separated from each other like the uncoated fibers. Thermogravimetric analysis (TGA) indicates an improvement of oxidation resistance of the coated fibers compared to uncoated fibers.

A convenient light initiated synthesis of silver and gold nanoparticles using a single source precursor.

A photochemical approach is reported for the straightforward synthesis of silver and gold nanoparticles using a single source precursor under very mild conditions.

Conductive AFM for CNT characterization.

We report on and emphasize the versatility of conductive atomic force microscopy in characterizing vertically aligned carbon nanotubes (CNTs) aimed to be used in via interconnect technology. The study is conducted on multi-walled CNT arrays vertically grown on a copper-based metal line. Voltage-dependent current mapping and current-voltage characteristics recorded down to single CNT allow for a comprehensive insight into the electric behaviour of the hybrid structure.

Metastable ß-Bi2O3 nanoparticles with high photocatalytic activity from polynuclear bismuth oxido clusters.

The synthesis of nanoscaled ß-Bi(2)O(3) starting from the bismuth oxido clusters [Bi(6)O(4)(OH)(4)](NO(3))(6)·H(2)O, [Bi(22)O(26)(OSiMe(2)(t)Bu)(14)], [Bi(38)O(45)(NO(3))(20)(DMSO)(28)](NO(3))(4)·4DMSO and [Bi(38)O(45)(OMc)(24)(DMSO)(9)]·2DMSO·7H(2)O (OMc = O(2)CC(3)H(5)) under ambient conditions is reported. The metal oxido clusters are regarded as ideal precursors for ß-Bi(2)O(3) due to their structural relationship with the latter. Nevertheless, different bismuth oxide polymorphs are accessible dependent on the hydrolysis protocol. Hydrolysis over a period of 18 h gave stable α-Bi(2)O(3) whereas after 3 min an amorphous material is observed. Annealing of the amorphous material at 370 °C gave nanoscaled ß-Bi(2)O(3). An unusual high reactivity of the ß-Bi(2)O(3) particles with SiO(2) and Al(2)O(3) is observed at temperatures above 400 °C. Powder X-ray diffraction studies, transmission electron microscopy, diffuse reflectance UV/Vis spectroscopy and nitrogen adsorption measurements are used for characterization of the as-prepared ß-Bi(2)O(3) nanoparticles. The properties of the ß-Bi(2)O(3) nanoparticles depend on the starting bismuth oxido clusters with regard to particle size and optical band gap. The ß-Bi(2)O(3) nanoparticles show excellent photocatalytic activity as demonstrated by dye decomposition (rhodamine B, methyl orange, methylene blue and orange G) under visible light.

Tin Oxide Nanoparticles and SnO2 /SiO2 Hybrid Materials by Twin Polymerization Using Tin(IV) Alkoxides.

Twin polymerization was used to prepare composite materials composed of SnO2 nanoparticles entrapped in a polymer matrix. Novel, well-defined tin-containing molecular precursors, so-called twin monomers, were synthesized by transesterification starting from Sn(OR)4 (R=tBu, tAm) to give Sn(OCH2 C4 H3 O)4 (1), [Sn(OCH2 C4 H3 S)4 ⋅HOCH2 C4 H3 S]2 (2), [Sn(OCH2 -2-OCH3 C6 H4 )4 ⋅HOCH2 -2-OCH3 C6 H4 ]2 (3), [Sn(OCH2 -2,4-(OCH3 )2 C6 H3 )4 ⋅HOCH2 -2,4-(OCH3 )2 C6 H3 ]2 (4), 2,2'-spirobi[4H-1,3,2-benzodioxastannine] (5), 2,2'-spirobi[6-methylbenzo(4H-1,3,2)-dioxastannine] (6), and 2,2'-spirobi[6-methoxybenzo(4H-1,3,2)dioxastannine] (7). 13 C and 119 Sn NMR spectroscopy in the solid state and in solution as well as IR spectroscopy and elemental analysis were used to characterize the tin alkoxides. The molecular structures of compounds 2 and 3 were determined by single-crystal X-ray diffraction analysis. The moisture sensitivity of the tin(IV) alkoxides was demonstrated by the formation of the tin oxocluster [Sn3 (µ3 -O)(µ2 -OH)(µ2 -OCH2 C4 H3 S)3 (OCH2 C4 H3 S)6 (HOCH2 C4 H3 S)]2 (2 a), a hydrolysis product of compound 2. Polymerization reactions in the melt (for 1 and 5) and in solution (for 2-4) resulted in cross-linked nanocomposites of the type polymer/SnO2 . Subsequent oxidation of the composites gave SnO2 with BET surface areas up to 178 m2 g-1 . Simultaneous twin polymerization of compounds 5-7 with the silicon derivative 2,2'-spirobi[4H-1,3,2-benzodioxasiline] resulted in the formation of polymer/SnO2 /SiO2 hybrid materials. Oxidation gave porous materials with SnO2 nanoparticles embedded in a silica network with BET surface areas up to 378 m2 g-1 . The silica acts as a crystal growth inhibitor, which prevents sintering of the SnO2 nanoparticles 20-32 nm in size.

Metastable ß-Bi2O3 Nanoparticles with Potential for Photocatalytic Water Purification Using Visible Light Irradiation.

Photocatalytic studies under visible light irradiation using nanosized ß-Bi2O3 are reported. ß-Bi2O3 nanoparticles are prepared starting from the well-defined bismuth oxido cluster [Bi38O45(OMc)24(DMSO)9]⋅2 DMSO⋅7 H2O (OMc=O2CC3H5) using a straightforward hydrolysis and annealing protocol. Powder X-ray diffraction studies, transmission electron microscopy, diffuse reflectance UV/Vis spectroscopy and nitrogen adsorption measurements (using the Brunauer-Emmett-Teller (BET) theory) are used for the characterization of the as-prepared ß-Bi2O3. By time-dependent annealing, the crystallite size can be controlled between (17±2) nm and (45±5) nm with BET surface areas of 7 to 29 m(2) g(-1). The indirect band gap of the as-prepared ß-Bi2O3 amounts to (2.15±0.05) eV. The decomposition rates for rhodamine B (RhB) solutions are in the range of 2.46×10(-5) to 4.01×10(-4) s(-1) and depend on the crystallite size, amount of catalyst and concentration of RhB. Photocorrosion experiments have shown the formation of Bi2O2CO3 after several catalytic cycles. However, the catalyst can be recycled to phase-pure ß-Bi2O3 nanoparticles by annealing for one hour under argon atmosphere at 380 °C. Furthermore, the photocatalytic activity of as-prepared ß-Bi2O3 nanoparticles for the decomposition of phenol, 4-chlorophenol, 2,4-dichlorphenol, 4-nitrophenol, triclosan and ethinyl estradiol is demonstrated.

Nanoscale optical and electrical characterization of horizontally aligned single-walled carbon nanotubes.

During the recent years, a significant amount of research has been performed on single-walled carbon nanotubes (SWCNTs) as a channel material in thin-film transistors (Pham et al. IEEE Trans Nanotechnol 11:44-50, 2012). This has prompted the application of advanced characterization techniques based on combined atomic force microscopy (AFM) and Raman spectroscopy studies (Mureau et al. Electrophoresis 29:2266-2271, 2008). In this context, we use confocal Raman microscopy and current sensing atomic force microscopy (CS-AFM) to study phonons and the electronic transport in semiconducting SWCNTs, which were aligned between palladium electrodes using dielectrophoresis (Kuzyk Electrophoresis 32:2307-2313, 2011). Raman imaging was performed in the region around the electrodes on the suspended CNTs using several laser excitation wavelengths. Analysis of the G+/G- splitting in the Raman spectra (Sgobba and Guldi Chem Soc Rev 38:165-184, 2009) shows CNT diameters of 2.5 ± 0.3 nm. Neither surface modification nor increase in defect density or stress at the CNT-electrode contact could be detected, but rather a shift in G+ and G- peak positions in regions with high CNT density between the electrodes. Simultaneous topographical and electrical characterization of the CNT transistor by CS-AFM confirms the presence of CNT bundles having a stable electrical contact with the transistor electrodes. For a similar load force, reproducible current-voltage (I/V) curves for the same CNT regions verify the stability of the electrical contact between the nanotube and the electrodes as well as the nanotube and the AFM tip over different experimental sessions using different AFM tips. Strong variations observed in the I/V response at different regions of the CNT transistor are discussed.

Temperature-dependent Raman investigation of rolled up InGaAs/GaAs microtubes.

Large arrays of multifunctional rolled-up semiconductors can be mass-produced with precisely controlled size and composition, making them of great technological interest for micro- and nano-scale device fabrication. The microtube behavior at different temperatures is a key factor towards further engineering their functionality, as well as for characterizing strain, defects, and temperature-dependent properties of the structures. For this purpose, we probe optical phonons of GaAs/InGaAs rolled-up microtubes using Raman spectroscopy on defect-rich (faulty) and defect-free microtubes. The microtubes are fabricated by selectively etching an AlAs sacrificial layer in order to release the strained InGaAs/GaAs bilayer, all grown by molecular beam epitaxy. Pristine microtubes show homogeneity of the GaAs and InGaAs peak positions and intensities along the tube, which indicates a defect-free rolling up process, while for a cone-like microtube, a downward shift of the GaAs LO phonon peak along the cone is observed. Formation of other type of defects, including partially unfolded microtubes, can also be related to a high Raman intensity of the TO phonon in GaAs. We argue that the appearance of the TO phonon mode is a consequence of further relaxation of the selection rules due to the defects on the tubes, which makes this phonon useful for failure detection/prediction in such rolled up systems. In order to systematically characterize the temperature stability of the rolled up microtubes, Raman spectra were acquired as a function of sample temperature up to 300°C. The reversibility of the changes in the Raman spectra of the tubes within this temperature range is demonstrated.

Site-dependent donation/backdonation charge transfer at the CoPc/Ag(111) interface.

The organic/metal interface formed upon adsorption of cobalt(II) phthalocyanine (CoPc) molecules on a flat Ag(111) single crystal was investigated using a combination of scanning tunneling microscopy (STM) and photoemission spectroscopy (PES). A flat-lying molecular adsorption with the π conjugated phthalocyanine ligand parallel to the substrate was found to lead to an effective molecule-substrate coupling which governs a template-guided molecular growth. A voltage polarity dependence at the cobalt ion site was emphasized and correlated with the Co 2p core level spectra evolution which sustains an interface-confined reduction effect of the cobalt oxidation state. The formation of interface dipoles was observed via monitoring the changes in the work function (WF) upon deposition. The observations are discussed on the basis of a site-dependent donation/backdonation charge transfer at the molecule-substrate interface.

Adsorption of poly(vinyl formamide-co-vinyl amine) (PVFA-co-PVAm) polymers on zinc, zinc oxide, iron, and iron oxide surfaces.

The adsorption of poly(vinyl formamide) (PVFA) and the statistic copolymers poly(vinyl formamide-co-vinyl amine) (PVFA-co-PVAm) onto zinc and iron metal particles as well as their oxides was investigated. The adsorbates were characterized by means of XPS, DRIFT spectroscopy, wet chemical analysis, and solvatochromic probes. Dicyano-bis-(1,10-phenanthroline)-iron(II) (1), 3-(4-amino-3-methylphenyl)-7-phenyl-benzo-[1,2-b:4,5-b']difuran-2,6-dione (2), and 4-tert-butyl-2-(dicyano-methylene)-5-[4-(diethylamino)-benzylidene]-Δ(3)-thiazoline (3) as solvatochromic probes were coadsorbed onto zinc oxide to measure various effects of surface polarity. The experimental findings showed that the adsorption mechanism of PVFA and PVFA-co-PVAm strongly depends on the degree of hydrolysis of PVFA and pH values and also on the kind of metal or metal oxide surfaces that were employed as adsorbents. The adsorption mechanism of PVFA/PVFA-co-PVAm onto zinc oxide and iron oxide surfaces is mainly affected by electrostatic interactions. Particularly in the region of pH 5, the adsorption of PVFA/PVFA-co-PVAm onto zinc and iron metal particles is additionally influenced by redox processes, dissolution, and complexation reactions.

Au nanoparticles stabilised by PEGylated low generation PAMAM dendrimers: design, characterisation and properties.

The preparation and characterisation of a series of well-defined low generation (poly)amidoamine (PAMAM)-based dendrimers with end-grafted ethylene glycol ether moieties of type N(CH(2)CH(2)C(O)NHCH(2)CH(2)NR(2))(3) (3a, R=CH(2)CH(2)C(O)OCH(2)CH(2)OCH(3); 3b, R=CH(2)CH(2)C(O)O(CH(2)CH(2)O)(2)C(2)H(5); 3c, R=CH(2)CH(2)C(O)O(CH(2)CH(2)O)(9)CH(3)), [CH(2)N(CH(2)CH(2)C(O)NHCH(2)CH(2)NR(2))(2)](2) (4, R=CH(2)CH(2)C(O)O(CH(2)CH(2)O)(2)C(2)H(5)) and (R(2)NCH(2)CH(2)NHC(O)CH(2)CH(2))N[CH(2)CH(2)N(CH(2)CH(2)C(O)NHCH(2)CH(2)NR(2))(2)](2) (5a, R=CH(2)CH(2)C(O)OCH(2)CH(2)OCH(3); 5b, R=CH(2)CH(2)C(O)O(CH(2)CH(2)O)(2)C(2)H(5); 5c, R=CH(2)CH(2)C(O)O(CH(2)CH(2)O)(9)CH(3)) and their application for the stabilisation of gold nanoparticles (Au NPs) is described. These dendrimers were prepared by a consecutive divergent synthesis methodology including Michael addition and amidation cycles. For comparison, amidoamine related model compounds N(C(3)H(7))R(2) (1, R=CH(2)CH(2)C(O)O(CH(2)CH(2)O)(2)C(2)H(5)) and [CH(2)NR(2)](2) (2, R=CH(2)CH(2)C(O)O(CH(2)CH(2)O)(2)C(2)H(5)) were also synthesised to estimate the minimum required donating capabilities of the stabiliser. Loading the appropriate dendritic templates with H[AuCl(4)] (12) and subsequent reduction of the respective metallodendrimers with Na[BH(4)] produced dendrimer encapsulated gold colloids. The dendrimeric scaffold, the length of the ethylene glycols, the adjusted stabilizer:gold ratio and the duration of reaction time affects the average Au particle diameter in a range of 4.0 (±0.9) to 58.5 (±14.5) nm. Furthermore, depending on the nature of the stabiliser, nanoparticles were formed having spherical or multiple morphologies. Characterisation by transmission electron microscopy (TEM), dynamic light scattering (DLS), UV/vis, and IR spectroscopy revealed that Au NPs are formed and protected inside the dendrimer scaffold.

Initial growth of lutetium(III) bis-phthalocyanine on Ag(111) surface.

The adsorption of lutetium(III) bis-phthalocyanine (LuPc(2)) on Ag(111) was investigated using scanning tunneling microscopy and spectroscopy (STM/STS). A comprehensive study was carried out toward understanding the driving mechanism responsible for the formation of the first and second monolayers (MLs). In both MLs, the adsorbed molecules are found to exhibit different in-plane orientations arranged according to a "chess-board" like pattern. Highly resolved STM images allowed an exact determination of the corresponding angle mismatch, which differs for the first and second MLs. The tunneling transport through individual molecules reveals a negative differential resistance (NDR) effect detectable within the current-voltage curves. The corresponding density of states (DOS) representation is consistent with a resonant tunneling mechanism sustained by the valence band (VB) states close to the Fermi energy (E(F)) recorded via highly resolved ultraviolet photoemission spectroscopy (UPS).

Aging of rubrene layers in Ni/rubrene heterostructures studied by magneto-optical Kerr effect spectroscopy.

Magneto-optical Kerr effect (MOKE) spectroscopy was applied to probe the aging of Ni/rubrene bilayers under ambient atmosphere. A comparison between the simulated MOKE spectra of the heterostructure and the experimental MOKE spectra recorded at several time intervals after the samples were exposed to the ambient atmosphere demonstrates that the organic layer undergoes slow oxidation. The Ni top layer was found to exhibit capping properties, reducing the rate of oxidation of the organic underlayer in comparison with single organic layers.