Determination of soluble anions and cations from waters of pulp and paper mills with on-line coupled capillary electrophoresis.

When the degree of closure of the paper machine wet end waters increases, wet end problems also become more difficult to control without specific and selective on-line measurements. The need to measure the concentrations of individual compounds in order to explain wet end phenomena is growing. This study was performed to set up a CE system to a paper machine and to determine soluble inorganic and organic ions in different locations of pulp and paper process waters with real time analyses by two on-line CE methods. A reconstructed commercial CE apparatus was connected to a papermaking machine via an apparatus, which was a combined sampling and sample pretreatment instrument, the role of which was to filter and dilute the samples before on-line determination by CE. The on-line procedures were optimized for simultaneous determination of anions as chloride, sulfate, oxalate, formate and acetate and for determination of cations as potassium, calcium, sodium, magnesium and traces of aluminium. The quantification was performed with external standard methods using the programs available in the commercial CE instrument. The concentrations of the ions were transferred by using a computerized transfer algorithm exporting the results from the analysis instrument to the process control unit. The developed on-line procedures were tested three times in paper and paperboard mills for 1 month at a time. Correlations were observed between the CE results and changes in the processes.

Quantification of anions and cations in environmental water samples. Measurements with capillary electrophoresis and indirect-UV detection.

The aim of this study was to validate two separation methods for determination of inorganic anions and cations from natural waters with capillary electrophoresis (CE) by using indirect-UV detection. The research is related to method development for screening of groundwater samples obtained in site investigations for spent fuel of the Finnish nuclear industry. In CE analysis, anions were separated in pyromellitic acid (pH 7.7) in the order bromide, chloride, sulphate, nitrite, nitrate, fluoride and dihydrogenphosphate. Cations were separated at pH 3.6 after anions using an 18-crown-6-ether solution. In these analyses, ammonium migrated first followed by potassium, calcium, sodium and magnesium. The concentrations of the ions in the natural water samples were calculated by using two or three calibration curves made using reference solutions at concentration levels of 0.5-250 mg/l. The repeatabilities of the anion and cation methods were tested using laboratory-made reference sample mixtures with high and low salt concentrations. The limits of quantification in the analyses were between 0.02 and 0.1 mg/l, depending on the ion. Concentrations of ions tested in natural waters varied from a few milligrams to tens of grams per litre.