The Nanodiffraction beamline ID01/ESRF: a microscope for imaging strain and structure.

The ID01 beamline has been built to combine Bragg diffraction with imaging techniques to produce a strain and mosaicity microscope for materials in their native or operando state. A scanning probe with nano-focused beams, objective-lens-based full-field microscopy and coherent diffraction imaging provide a suite of tools which deliver micrometre to few nanometre spatial resolution combined with 10-5 strain and 10-3 tilt sensitivity. A detailed description of the beamline from source to sample is provided and serves as a reference for the user community. The anticipated impact of the impending upgrade to the ESRF - Extremely Brilliant Source is also discussed.

In situ study of the formation mechanism of two-dimensional superlattices from PbSe nanocrystals.

Oriented attachment of PbSe nanocubes can result in the formation of two-dimensional (2D) superstructures with long-range nanoscale and atomic order. This questions the applicability of classic models in which the superlattice grows by first forming a nucleus, followed by sequential irreversible attachment of nanocrystals, as one misaligned attachment would disrupt the 2D order beyond repair. Here, we demonstrate the formation mechanism of 2D PbSe superstructures with square geometry by using in situ grazing-incidence X-ray scattering (small angle and wide angle), ex situ electron microscopy, and Monte Carlo simulations. We observed nanocrystal adsorption at the liquid/gas interface, followed by the formation of a hexagonal nanocrystal monolayer. The hexagonal geometry transforms gradually through a pseudo-hexagonal phase into a phase with square order, driven by attractive interactions between the {100} planes perpendicular to the liquid substrate, which maximize facet-to-facet overlap. The nanocrystals then attach atomically via a necking process, resulting in 2D square superlattices.

Structure and rheology of mixed suspensions of montmorillonite and silica nanoparticles.

We present a study of the structure and rheology of mixed suspensions of montmorillonite clay platelets and Ludox TMA silica spheres at pH 5, 7, and 9. Using cryogenic transmission electron microscopy (cryo-TEM), we probe the changes in the structure of the montmorillonite suspensions induced by changing the pH and by adding silica particles. Using oscillatory and transient rheological measurements, we examine the changes in storage modulus and yield stress of the montmorillonite suspensions upon changing the pH and adding silica particles. Cryo-TEM images reveal that changes in pH have a significant effect on the structure of the suspensions, which can be related to the change in charge of the edges from positive at pH 5 to negative at higher pH. Furthermore, at pH 7, the cryo-TEM images show indications of a microphase separation between clay and silica particles. The addition of silica leads to lowering of the storage modulus and yield stress, which we connect to the structural changes of the suspension.

Thermally induced self-assembly of cylindrical nanodomains in low molecular weight PS-b-PMMA thin films.

The phase behaviour in thin films of an asymmetric polystyrene-b-polymethylmethacrylate (PS-b-PMMA) block copolymer with a molecular weight of 39 kg mol(-1) was assessed at a wide range of temperatures and times. Cylindrical PMMA structures featuring a diameter close to 10 nm and perpendicularly oriented with respect to the substrate were obtained at 180 °C in relatively short annealing times (t ≤ 30 min) by means of a simple thermal treatment performed in a standard rapid thermal processing machine.

Defect engineering in sedimentary colloidal photonic crystals.

In this paper, lithographic methods are successfully employed to create growth templates for colloidal self-assembly, enabling the inclusion of crystallographic defects at predetermined positions. It is shown that through smart template design stacking faults can be grown predictably into face centered cubic structures. More interestingly, by precise guiding of the stacking faults hollow intergrowth channels can be grown at predetermined lateral and vertical positions. The mechanisms involved in defect growth are promising for extension of this technique to more complex crystal structures, such as the diamond structure, as well as to more complex faults, including corners and t-junctions.

Effects of added silica nanoparticles on hectorite gels.

We present a study on the macroscopic, microscopic, and rheological behavior of mixtures of natural hectorite clay and different types of anionic Ludox silica spheres. Adding silica spheres to the weak hectorite gels leads the collapse of the suspensions, while the strong gels remain space-filling, though their storage modulus and the yield stress values diminish. We discuss what kind of structural rearrangements are possibly responsible for the macroscopic and rheological changes in the clay/silica mixtures.

Three-dimensional structure and defects in colloidal photonic crystals revealed by tomographic scanning transmission X-ray microscopy.

Self-assembled colloidal crystals have attracted major attention because of their potential as low-cost three-dimensional (3D) photonic crystals. Although a high degree of perfection is crucial for the properties of these materials, little is known about their exact structure and internal defects. In this study, we use tomographic scanning transmission X-ray microscopy (STXM) to access the internal structure of self-assembled colloidal photonic crystals with high spatial resolution in three dimensions for the first time. The positions of individual particles of 236 nm in diameter are identified in three dimensions, and the local crystal structure is revealed. Through image analysis, structural defects, such as vacancies and stacking faults, are identified. Tomographic STXM is shown to be an attractive and complementary imaging tool for photonic materials and other strongly absorbing or scattering materials that cannot be characterized by either transmission or scanning electron microscopy or optical nanoscopy.

Scanning transmission x-ray microscopy as a novel tool to probe colloidal and photonic crystals.

Photonic crystals consisting of nano- to micrometer-sized building blocks, such as multiple sorts of colloids, have recently received widespread attention. It remains a challenge, however, to adequately probe the internal crystal structure and the corresponding deformations that inhibit the proper functioning of such materials. It is shown that scanning transmission X-ray microscopy (STXM) can directly reveal the local structure, orientations, and even deformations in polystyrene and silica colloidal crystals with 30-nm spatial resolution. Moreover, STXM is capable of imaging a diverse range of crystals, including those that are dry and inverted, and provides novel insights complementary to information obtained by benchmark confocal fluorescence and scanning electron microscopy techniques.

Patchy polymer colloids with tunable anisotropy dimensions.

We present the synthesis of polymer colloids with continuously tunable anisotropy dimensions: patchiness, roughness, and branching. Our method makes use of controlled fusion of multiple protrusions on highly cross-linked polymer particles produced by seeded emulsion polymerization. Carefully changing the synthesis conditions, we can tune the number of protrusions, or branching, of the obtained particles from spheres with one to three patches to raspberry-like particles with multiple protrusions. In addition to that, roughness is generated on the seed particles by adsorption of secondary nucleated particles during synthesis. The size of the roughness relative to the smooth patches can be continuously tuned by the initiator, surfactant, and styrene concentrations. Seed colloids chemically different from the protrusions induce patches of different chemical nature. The underlying generality of the synthesis procedure allows for application to a variety of seed particle sizes and materials. We demonstrate the use of differently sized polyNIPAM (poly-N-isopropylacrylamide), as well as polystyrene and magnetite filled polyNIPAM seed particles, the latter giving rise to magnetically anisotropic colloids. The high yield together with the uniform, anisotropic shape make them interesting candidates for use as smart building blocks in self-assembling systems.

A fluorescent, paramagnetic and PEGylated gold/silica nanoparticle for MRI, CT and fluorescence imaging.

An important challenge in medical diagnostics is to design all-in-one contrast agents that can be detected with multiple techniques such as magnetic resonance imaging (MRI), X-ray computed tomography (CT), positron emission tomography (PET), single photon emission tomography (SPECT) or fluorescence imaging (FI). Although many dual labeled agents have been proposed, mainly for combined MRI/FI, constructs for three imaging modalities are scarce. Here gold/silica nanoparticles with a poly(ethylene glycol), paramagnetic and fluorescent lipid coating were synthesized, characterized and applied as trimodal contrast agents to allow for nanoparticle-enhanced imaging of macrophage cells in vitro via MRI, CT and FI, and mice livers in vivo via MRI and CT. This agent can be a useful tool in a multitude of applications, including cell tracking and target-specific molecular imaging, and is a step in the direction of truly multi-modal imaging.

Double stacking faults in convectively assembled crystals of colloidal spheres.

Using microradian X-ray diffraction, we investigated the crystal structure of convectively assembled colloidal photonic crystals over macroscopic (0.5 mm) distances. Through adaptation of Wilson's theory for X-ray diffraction, we show that certain types of line defects that are often observed in scanning electron microscopy images of the surface of these crystals are actually planar defects at 70.5 degrees angles with the substrate. The defects consist of two parallel hexagonal close-packed planes in otherwise face-centered cubic crystals. Our measurements indicate that these stacking faults cause at least 10% of stacking disorder, which has to be reduced to fabricate high-quality colloidal photonic crystals.

Paramagnetic lipid-coated silica nanoparticles with a fluorescent quantum dot core: a new contrast agent platform for multimodality imaging.

Silica particles as a nanoparticulate carrier material for contrast agents have received considerable attention the past few years, since the material holds great promise for biomedical applications. A key feature for successful application of this material in vivo is biocompatibility, which may be significantly improved by appropriate surface modification. In this study, we report a novel strategy to coat silica particles with a dense monolayer of paramagnetic and PEGylated lipids. The silica nanoparticles carry a quantum dot in their center and are made target-specific by the conjugation of multiple alphavbeta3-integrin-specific RGD-peptides. We demonstrate their specific uptake by endothelial cells in vitro using fluorescence microscopy, quantitative fluorescence imaging, and magnetic resonance imaging. The lipid-coated silica particles introduced here represent a new platform for nanoparticulate multimodality contrast agents.