Commensurate germanium light emitters in silicon-on-insulator photonic crystal slabs.

We report on the fabrication and characterization of silicon-on-insulator (SOI) photonic crystal slabs (PCS) with commensurately embedded germanium quantum dot (QD) emitters for near-infrared light emission. Substrate pre-patterning defines preferential nucleation sites for the self-assembly of Ge QDs during epitaxial growth. Aligned two-dimensional photonic crystal slabs are then etched into the SOI layer. QD ordering enhances the photoluminescence output as compared to PCSs with randomly embedded QDs. Rigorously coupled wave analysis shows that coupling of the QD emitters to leaky modes of the PCS can be tuned via their location within the unit cell of the PCS.

Mesenchymal stromal cells from the human placenta promote neovascularization in a mouse model in vivo.

Cell transplantation is a promising strategy in regenerative medicine for revascularization of ischemic tissues. Based on our observation that placental mesenchymal stromal cells (PMSC) enhance endothelial cell viability in vitro via secretion of angiogenic factors, we asked whether PMSC support vascular growth in vivo. PMSC were isolated from amnion and placental endothelial cells (PLEC) from chorion and either separately or co-transplanted subcutaneously into immune-deficient mice. Co-transplantation resulted in a higher number of perfused human vessels (CD31+/vimentin+) containing mouse glycophorin A+ erythrocytes. Results indicate positive effects of PMSC on neovascularization in vivo, making them attractive candidates to create autologous PMSC/PLEC pairs for research and transplantation.

Nanoscale analysis of surface oxides on ZnMgAl hot-dip-coated steel sheets.

In this work, the first few nanometres of the surface of ZnMgAl hot-dip-galvanised steel sheets were analysed by scanning Auger electron spectroscopy, angle-resolved X-ray photoelectron spectroscopy and atomic force microscopy. Although the ZnMgAl coating itself is exhibiting a complex micro-structure composed of several different phases, it is shown that the topmost surface is covered by a smooth, homogeneous oxide layer consisting of a mixture of magnesium oxide and aluminium oxide, exhibiting a higher amount of magnesium than aluminium and a total film thickness of 4.5 to 5 nm. Especially by the combined analytical approach of surface-sensitive methods, it is directly demonstrated for the first time that within surface imprints--created by industrial skin rolling of the steel sheet which ensures a smooth surface appearance as well as reduced yield-point phenomenon--the original, smooth oxide layer is partly removed and that a layer of native oxides, exactly corresponding to the chemical structure of the underlying metal phases, is formed.

Single and multilayer metamaterials fabricated by nanoimprint lithography.

We demonstrate for the first time a fast and easy nanoimprint lithography (NIL) based stacking process of negative index structures like fishnet and Swiss-cross metamaterials. The process takes a few seconds, is cheap and produces three-dimensional (3D) negative index materials (NIMs) on a large area which is suitable for mass production. It can be performed on all common substrates even on flexible plastic foils. This work is therefore an important step toward novel and breakthrough applications of NIMs such as cloaking devices, perfect lenses and magnification of objects using NIM prisms. The optical properties of the fabricated samples were measured by means of transmission and reflection spectroscopy. From the measured data we retrieved the effective refractive index which is shown to be negative for a wavelength around 1.8 µm for the fishnet metamaterial while the Swiss-cross metamaterial samples show a distinct resonance at wavelength around 1.4 µm.

Radiation and scattering from imperfect cylindrical electromagnetic cloaks.

The design of electromagnetic invisibility cloaks is based on singular mappings prescribing zero or infinite values for material parameters on the inner surface of the cloak. Since this is only approximately feasible, an asymptotic analysis is necessary for a sound description of cloaks. We adopt a simple and effective approach for analyzing electromagnetic cloaks - instead of the originally proposed singular mapping, nonsingular mappings asymptotically approaching the ideal one are considered. Scattering and radiation from this type of imperfect cylindrical cloaks is solved analytically and the results are confirmed by full-wave finite element simulations. Our analysis sheds more light on the influence of this kind of imperfection on the cloaking performance and further explores the physics of cloaking devices.

Refraction and band isotropy in 2D square-like Archimedean photonic crystal lattices.

In this paper we theoretically study refraction effects in the 2D square-like Archimedean photonic crystals (3(2), 4, 3, 4) and (4, 8(2)) made of dielectric rods in air. In addition, we investigated a band isotropy and band gap structure in these lattices. We compared the square and square-like structures as well, their refraction characteristics, zone structures and the level of band and band gap isotropy (bandwidth and band gap dependence on the wave vector). We found that square-like structures can have some advantages over the square ones regarding the completeness of the gap, its isotropy and the gap width. Also, due to the same square primitive unit cell and the first Brillouin zone, the square and square-like lattices have similar optical response in lower bands.

Strain oscillations probed with light.

We show that reflectance difference spectroscopy (RDS) is sensitive to the inhomogeneous surface and thin film strain which builds up during hetero- and homoepitaxial growth. The RDS signal is affected by the local, mean square atomic displacements in the substrate resulting from the stress relaxation of strained adlayer islands. For layer-by-layer growth an oscillatory variation of the RDS intensity is observed. These results demonstrate the potentiality of RDS to probe the growth kinetics on structurally anisotropic surfaces.

Negative refraction and flat-lens focusing in a 2D square-lattice photonic crystal at microwave and millimeter wave frequencies.

We report on a study of the wave propagation and refraction in a 2D square-lattice photonic crystal for the first two photonic bands as well as the coupling of the external waves and criteria for flat-lens focusing. Microwave experiments and numerical simulations are performed. Main results concern the transition from positive to negative refraction below the first band gap, the flat-lens focusing using a novel criterion, viz. the constancy of the ratio of the tangents of the incident and refracted angle. Focusing results for medium ( approximately 10) and ultra-large dielectric contrast ( approximately 100) are presented. In the latter case focusing with a spot size below one wavelength at distances several wavelengths behind the photonic crystal is achieved.

Refraction and rightness in photonic crystals.

We present a study on relation between the refraction and rightness effects in photonic crystals applied on a 2D square lattice photonic crystal. The plane wave (the band and equifrequency contour analyses) and FDTD calculations for both TM and TE modes revealed all possible refraction and rightness cases in photonic crystal structures in the first three bands. In particular, we show for the first time, a possibility of the left-handed positive refraction. This means that left-handedness does not necessarily imply negative refraction in photonic crystals.

Enhanced optical sensitivity to adsorption due to depolarization of anisotropic surface states.

Reflectance difference spectroscopy is used to probe the optical transitions between surface states on the Cu(110) surface. Upon deposition of smallest amounts of carbon monoxide (CO) the signal is strongly quenched, which translates into a huge cross section of the order of 1000 A(2) for a single adsorbed CO molecule. This strongly enhanced surface sensitivity is interpreted as the loss in anisotropy (depolarization) of the surface states due to scattering from the adsorbed CO molecules. This feature renders RDS an extremely sensitive tool to probe the adsorption kinetics on anisotropic metal surfaces.