Influence of solvents on the morphology of Langmuir and Langmuir-Schaefer films of PCBM and PCBM-based oligomers and polymers.

Fullerene-based polymers and oligomers combined with non-fullerene acceptors show extremely high efficiencies in organic photovoltaic devices. Furthermore, fullerene-based materials are of interest for use in anti-cancer and anti-viral treatments, where their presence can enhance the efficacy of medication considerably. Therefore, it remains important to understand their morphology and electronic properties to improve devices and technological applications. The main goal of this study is to prepare and characterize Langmuir and Langmuir-Schaefer films of PCBM-based materials to investigate the influence of different solvents such as chloroform, toluene, and xylene, and co-components on their morphology. PCBM-based materials were thus studied either alone or in mixtures with a polythiophene derivative (poly(3-hexythiophene), P3HT) commonly used in organic photovoltaic devices. The formation of Langmuir films was studied using surface pressure isotherms and Brewster's angle microscopy (BAM), where the homogeneity, phase behavior, and morphology of the films were investigated. In addition, Langmuir-Schaefer films were characterized by UV-visible absorption spectroscopy, atomic force microscopy (AFM), and Raman spectroscopy, providing information on the morphology of the solid films. This study has shown that it is possible to successfully fabricate Langmuir and Langmuir-Schaefer films of PCBM and PCBM-based oligomers and polymers, both pure and in mixtures with P3HT, to compare their organization, roughness, and optical properties. With the Langmuir films, it was possible to estimate the area of the molecules and visualize their aggregation through BAM images, establishing a relationship between the area occupied by these materials and the solvent used. All characterization techniques corroborate that the use of chloroform significantly reduced the roughness of the LS films mixed with P3HT and also presented a higher ordering compared to films prepared with xylene solutions.

Understanding the langmuir and Langmuir-Schaefer film conformation of low-bandgap polymers and their bulk heterojunctions with PCBM.

Low-bandgap polymers are widely used as p-type components in photoactive layers of organic solar cells, due to their ability to capture a large portion of the solar spectrum. The comprehension of their supramolecular assembly is crucial in achieving high-performance organic electronic devices. Here we synthezed two exemplar low-bandgap cyclopentadithiophene (CPDT):diketopyrrolopyrrole (DPP)-based polymers, with either a twelve carbon (C12) or a tri etyleneglycol (TEG) side chains on the DPP units (respectively denoted PCPDTDPP_C12 and PCPDTDPP_TEG). We deposited Langmuir-Schaefer films of these polymers blended with the widely used electron donor material [6,6]-phenyl-C61-butyric-acid methyl ester (PCBM). We then characterized the conformational, optical and morphological properties of these films. From the monolayers to the solid films, we observed distinct self-organization and surface properties for each polymer due to the distinct nature of their side chains. Emphasizing their attraction interactions with PCBM and the phase transitions according to the surface pressure. The elements amount on the surface, calculated through the XPS, gave us a good insight on the polymers' conformations. Through UV-visible absorption spectroscopy, the improvement in the PCPDTDPP film ordering upon PCBM addition is evident and we saw the contribution of the polymer units on the optical response. Chemical attributions of the polymers were assigned using FTIR Spectroscopy and Raman Scattering, revealing the physical interaction after mixing the materials. We showed that it is possible to build nanostructured PCPDTDPPs films with a high control of their molecular properties through an understanding of their self-assembly and interactions with an n-type material.

Suppression of Thermally Induced Fullerene Aggregation in Polyfullerene-Based Multiacceptor Organic Solar Cells.

A novel main-chain polyfullerene, poly[fullerene-alt-2,5-bis(octyloxy)terephthalaldehyde] (PPC4), is investigated for its hypothesized superior morphological stability as an electron-accepting material in organic photovoltaics relative to the widely used fullerene phenyl-C61-butyric acid methyl ester (PCBM). When mixed with poly(3-hexylthiophene-2,5-diyl) (P3HT), PPC4 affords low-charge-generation yields because of poor intermixing within the blend. The adoption of a multiacceptor system, by introducing PCBM into the P3HT:polyfullerene blend, was found to lead to a 3-fold enhancement in charge generation, affording power conversion efficiencies very close to that of the prototypical P3HT:PCBM binary control. Upon thermal stressing and in contrast to the P3HT:PCBM binary, photovoltaic devices based on the multiacceptor system demonstrated significantly improved stability, outperforming the control because of suppression of the PCBM migration and aggregation processes responsible for rapid device failure. We rationalize the influence of the fullerene miscibility and its implications on the device performance in terms of a thermodynamic model based on Flory-Huggins solution theory. Finally, the potential universal applicability of this approach for thermal stabilization of organic solar cells is demonstrated, utilizing an alternative low-band-gap polymer-donor system.

Sterically controlled azomethine ylide cycloaddition polymerization of phenyl-C61-butyric acid methyl ester.

Phenyl-C61-butyric acid methyl ester (PCBM) is polymerized simply using a one-pot reaction to yield soluble, high molecular weight polymers. The sterically controlled azomethine ylide cycloaddition polymerization (SACAP) is demonstrated to be highly adaptable and yields polymers with probable Mn≈ 24 600 g mol(-1) and Mw≈ 73 800 g mol(-1). Products are metal-free and of possible benefit to organic and hybrid photovoltaics and electronics as they form thin films from solution and have raised LUMOs. The promising electronic properties of this new polymer are discussed.

Theoretical and experimental study of low band gap polymers for organic solar cells.

A combined theoretical and experimental investigation of the electronic structure and optical properties of poly(3-hexylthiophene) (P3HT), poly[3-(4-octylphenyl)thiophene] (POPT) and poly[3-(4-octylphenoxy)thiophene] (POPOT) is reported. In comparison with P3HT, POPT and POPOT exhibit better stabilities and the presence of an oxygen atom and/or a phenyl ring in the side chains enhances conjugation. Quantum chemical calculations have been performed on oligomers of increasing chain length to establish the changes in the electronic and optical properties when going from P3HT to the new derivative POPOT. The knowledge of the structure of these polymers is of utmost importance in understanding their optical properties in different phases (solution and condensed phase). The calculations indicate that, in opposition to P3HT and POPT polymers where the introduction of alkyl chains and the pendant phenyl disturbs the planarity of the backbone of the conjugated segment, POPOT has a better degree of organization in both states: the conjugated chain remains planar even in the presence of the phenoxy groups. Finally, the exciton binding energy is evaluated for these polymers and allows us to conclude that the POPOT is a promising polymer for photovoltaic applications when compared to P3HT and POPT.

Structure and properties of hydrophobically end-capped poly(ethylene oxide) solutions in the presence of monovalent and divalent cations.

Hydrophobically modified poly(ethylene oxide), HMPEO, was studied in concentrated salt solutions. The influence of salts was compared to the effect of temperature on poly(ethylene oxide), PEO. As expected, the addition of monovalent cations (Na(+), K(+)) has the same effect as an increase in temperature in agreement with the thermodynamic properties of PEO: a decrease in solubility, micelle size, and viscosity was observed. Moreover, the intensity of neutron scattering peaks (characteristic of the semi-dilute solutions of these associative polymers) increases due to the collapse of PEO coronae in micelles. Very peculiar behavior was observed in the presence of divalent cations (Ca(2+), Mg(2+)): larger micelle aggregates and higher viscosities, relaxation times, and activation energies were observed by dynamic rheology. This behavior is attributed to interactions between divalent cations and oxygen in PEO backbones close to the micelle core, which may reinforce intermicellar bridges.