ABSTRACT
Poly(N-isopropylacrylamide) (PNIPAM) nanogels were prepared by emulsion polymerization using sodium dodecyl sulfate (SDS) and employed as a capping agent in platinum nanoparticle (Pt NP) synthesis by liquid-phase reduction with hydrogen gas. When the PNIPAM nanogels were used without removing SDS, that is, a slight amount of SDS was included in the reaction solution, Pt nanocubes (NCs) were predominantly produced (>80%). The proportion of the resultant Pt NCs was much higher than that obtained using the PNIPAM linear polymer (â¼60%). To clarify the effects of the three-dimensional polymer network and SDS, we synthesized Pt NPs using the PNIPAM nanogel without SDS (SDS-free PNIPAM nanogel) and found that Pt NCs are rarely formed, and most NPs obtained have an irregular shape. When only SDS was used as a capping agent, NCs were hardly obtained, but other polyhedral NPs were formed. Furthermore, the use of SDS together with the PNIPAM polymer led to the decrease in the proportion of the Pt NCs compared with that obtained using only the linear polymer. These results indicate that the enhancement of the Pt NC proportion using the PNIPAM nanogel with SDS is attributable to not only the three-dimensional polymer network of the PNIPAM nanogel but also the assist of SDS as a capping agent.
ABSTRACT
A fundamental understanding of the effect of a crosslinker on gel properties is important for the design of novel soft materials because a crosslinking is a key component of polymer gels. We focused on post-polymerization crosslinking (PPC) system utilizing activated ester chemistry, which is a powerful tool due to structural diversity of diamine crosslinkers and less susceptibility to solvent effect compared to conventional divinyl crosslinking system, to systematically evaluate the crosslinker effect on the gel properties. A variety of alkyldiamine crosslinkers was employed for the synthesis of poly(N-isopropylacrylamide) (PNIPAAm) gels and it was clarified that the length of alkyl chains of diamine crosslinkers strongly affected the gelation reaction and the swelling behavior. The longer crosslinker induced faster gelation and decreased the swelling degree and the response temperature in water, while the crosslinking density did not significantly change. In addition, we were able to modify the polymer chains in parallel with crosslinking by using a monoamine modifier along with a diamine crosslinker. This simultaneous chain modification during crosslinking (SMC) was demonstrated to be useful for the regulation of the crosslinking density and the swelling behavior of PNIPAAm gels.
ABSTRACT
Research to improve the dimensional properties of silver nanowires (Ag NWs) for transparent conductive film (TCF) applications are being carried out intensively. However, the protocol for the designed synthesis of high-quality Ag NWs is yet to be developed due to the inadequacy of knowledge on the role of parameters. Here, we attempt to elucidate the role played by the parameters and propose a monoalcohol-copolymer based system for the designed synthesis of Ag NWs superior in quality to the one synthesized using conventional ethylene glycol (EG)-polyvinylpyrrolidone (PVP) system. The key findings of the study are as follows: (1) the solubility of Ag source and the partially formed AgCl particles in monoalcohols was found to play an important role not only in the reduction to metallic Ag but also on the uniaxial growth, (2) the adsorption of capping agents on Ag NWs was carried through O and N atoms in the base molecule and their binding energies indicated that the strength is the key parameter to obtain Ag NWs with high aspect ratio, (3) the properties of nanowire could be enhanced through copolymerization of VP and base molecules that have O- and N-based ligands, and (4) the influence of copolymerization on the physical and chemical properties of the surface active agent has been theoretically and experimentally verified. Consequently, we succeeded in the development of a new technique to synthesize high yield of Ag NWs with improved aspect ratio than EG-PVP system by using benzyl alcohol as reducing solvent and N-vinylpyrrolidone/N,N-diethylaminoethyl metacrylate copolymer as a capping agent. The optical transmittance and electrical resistivity of TCFs prepared using the Ag NWs with an average diameter of 43â¯nm, and an average length of 13⯵m were 98.6% and R: 49.1â¯Ω/â¡, respectively.
ABSTRACT
The effect of monomer sequence along the network chain on the swelling behavior of polymer gels should be clarified for the advanced control of swelling properties of gel materials. To this end, we systematically investigated the swelling properties of poly(acrylamide derivative) gels with the same composition but different monomer sequence by utilizing two gel synthetic methods: copolymerization giving a random network and co-crosslinking giving a blocky network. Both of the copolymerization and the co-crosslinking gels were prepared from the combination of two of the three following monomers: hydrophilic N,N-dimethylacrylamide (DMAAm), hydrophobic N-n-butylacrylamide (NBAAm), and thermoresponsive N-isopropylacrylamide (NIPAAm) with various monomer compositions. The swelling measurement of the obtained gels showed totally different behaviors between the copolymerization and the co-crosslinking gels, even with the same monomer composition. The copolymerization gels had the average property from the two monomers, depending on monomer composition, because random monomer distribution changed the affinity of each network chain to water. On the other hand, the co-crosslinking gels behaved as if two components independently contributed to the swelling properties, probably due to the domain structure derived from two kinds of prepolymers.
