Photocatalytic degradation and mineralization of microcystin-LR under UV-A, solar and visible light using nanostructured nitrogen doped TiO2.

In an attempt to face serious environmental hazards, the degradation of microcystin-LR (MC-LR), one of the most common and more toxic water soluble cyanotoxin compounds released by cyanobacteria blooms, was investigated using nitrogen doped TiO(2) (N-TiO(2)) photocatalyst, under UV-A, solar and visible light. Commercial Degussa P25 TiO(2), Kronos and reference TiO(2) nanopowders were used for comparison. It was found that under UV-A irradiation, all photocatalysts were effective in toxin elimination. The higher MC-LR degradation (99%) was observed with Degussa P25 TiO(2) followed by N-TiO(2) with 96% toxin destruction after 20 min of illumination. Under solar light illumination, N-TiO(2) nanocatalyst exhibits similar photocatalytic activity with that of commercially available materials such as Degussa P25 and Kronos TiO(2) for the destruction of MC-LR. Upon irradiation with visible light Degussa P25 practically did not show any response, while the N-TiO(2) displayed remarkable photocatalytic efficiency. In addition, it has been shown that photodegradation products did not present any significant protein phosphatase inhibition activity, proving that toxicity is proportional only to the remaining MC-LR in solution. Finally, total organic carbon (TOC) and inorganic ions (NO(2)(-), NO(3)(-) and NH(4)(+)) determinations confirmed that complete photocatalytic mineralization of MC-LR was achieved under both UV-A and solar light.

Development of a rapid and sensitive method for the simultaneous determination of 1,2-dibromoethane, 1,4-dichlorobenzene and naphthalene residues in honey using HS-SPME coupled with GC-MS.

A new method for the simultaneous determination of 1,4-dichlorobenzene (p-DCB), naphthalene and 1,2-dibromoethane (1,2-DBE) residues in honey has been developed. Analysis is carried out using gas chromatography-mass spectrometry (GC/MS) in selected ion monitoring mode (SIM), after extraction and preconcentration of target analytes by headspace solid-phase microextraction (HS-SPME), with a 100 microm film thickness polydimethylsiloxane (PDMS) fiber. Several parameters affecting the extension of the adsorption process (i.e., addition of salt, extraction time, extraction temperature) were studied. The optimal conditions for the determination of these analytes were established. The proposed HS-SPME method showed good sensitivity, without carryover between the samples. Linearity was studied from 5 to 2500 microg kg(-1) for p-DCB, 0.5 to 500 microg kg(-1) for naphthalene and 5 to 500 microg kg(-1) honey for 1,2-DBE with correlation coefficients (r(2)) ranging from 0.9901 to 0.9999. Precision was assessed and both intra and inter-day R.S.D.s (%) were below 6.3%. The detection limits were found to be 1, 0.1 and 2 microg kg(-1) honey for p-DCB, naphthalene and 1,2-DBE, respectively. The percentage recoveries that were evaluated with the proposed HS-SPME method and the standard addition calibration technique gave values among 72.8 and 104.3% for measurements in samples spiked with one target analyte or mixtures of the three. This method has been applied for the analysis of unknown honey samples. The results showed an excellent applicability of the proposed method for the determination of the target compounds in honey samples.

Photocatalytic reduction and recovery of mercury by polyoxometalates.

Photocatalytic reduction of mercury in aqueous solutions using PW12O40(3-) or SiW12O40(4-) as photocatalysts has been studied as a function of irradiation time, concentration of Hg(II), polyoxometalate, and organic substrate in the presence or absence of dioxygen. The photocatalytic cycle starts with irradiation of polyoxometalate, goes through the oxidation of, for instance, propan-2-ol (used as sacrificial reagent), and closes with the reoxidation of reduced polyoxometalate by Hg2+ ions. Mercury(II) is reduced to mercury(I) and finally to Hg(0) giving a dark-gray deposit, following a staged one-by-one electron process and a first-order kinetics in [Hg2+]. The process is slightly more efficient in the absence of dioxygen, while the increase of either catalyst or propan-2-ol concentration results in the augmentation of the rate of reduction till a certain point where it reaches a plateau. The results show that this method is suitable for a great range of mercury concentration from 20 to 800 ppm achieving almost complete recovery of mercury up to nondetected traces (<50 ppb). In addition, this homogeneous process demonstrates advantages such as the lack of necessity for separation of the zero state metal from the catalyst and ensures that the precipitation of metal will not poison the catalyst or hinder its photocatalytic activity.

Determination of polar pharmaceuticals in sewage water of Greece by gas chromatography-mass spectrometry.

Sewage influents and effluents of different urban areas of Greece, were analyzed for polar pharmaceutical residues, used in human medicine. Drugs investigated were the anti-inflammatory drugs diclofenac and ibuprofen, the metabolite of the drugs clofibrates used as blood lipid regulators, clofibric acid and the analgesics phenazone and propyphenazone. Analysis was carried out using capillary gas chromatography-mass spectrometry with selected ion monitoring. The method used was involved solid phase extraction (C(18)) and derivatization with pentafluorobenzyl bromide. Diclofenac was detected in every sewage effluent sample.

Photocatalytic reduction and recovery of copper by polyoxometalates.

A series of polyoxometalates PW12O40(3-), SiW12O40(4-), and P2Mo18O62(6-) have been used as photocatalysts for recovery of copper and production of fine metal particles. The process involves absorption of light by polyoxometalates, oxidation of an organic substrate, for instance, propan-2-ol as sacrificial reducing reagent, and reoxidation of the reduced polyoxometalates by Cu2+ ions, closing the photocatalytic cycle. Copper(II) ions are reduced to copper(I) and finally to zero-state particles in a 2-electron process, as also suggested by the half-order dependence. Increase of catalyst or propan-2-ol concentration, or both, accelerates the photodeposition of copper until a saturation value is reached. The method is operational at a wide range of copper concentrations varying from 3 to 1300 ppm, leading to very low final concentrations (<0.2 ppm). The presence of dioxygen suppresses the initiation of copper recovery, though the process is equally effective after dioxygen is consumed. The process is independent of pH within the range 0.3-5.0. Addition of ClO4-, NO3-, or CH3COO- has no effect on the removal of copper ions. Chloride ions retard the enhancement of copper precipitation through stabilization of copper(I). This homogeneous, polyoxometalate-based process exhibits some benefits in comparison with the semiconductor-based (heterogeneous) recovery of metals: The final zero-state metal particles are obtained in pure form. No separation from the catalyst is needed, and moreover, the process is catalytic as the photodeposited metal particulates do not hinder the photocatalytic action of polyoxometalate anions.

Sonolytic, photolytic, and photocatalytic decomposition of atrazine in the presence of polyoxometalates.

Aqueous solutions of atrazine [2-chloro-4-(isopropylamino)-6-(ethylamino)-s-triazine] (CIET) decompose upon illumination with a low-pressure Hg-arc lamp (254 nm). However, no decomposition takes place with lambda > 300 nm. On the other hand, addition of polyoxometalates (POM), PW12O40(3-) or SiW12O40(4-), into a solution of atrazine photodecomposes the substrate within a few minutes (cutoff fiter 320 nm). Ultrasound (US) treatment also decomposes aqueous solutions of atrazine within a few minutes. Both methods, sonolysis and photolysis with POM, give common intermediates, namely, 2-hydroxy-4-(isopropylamino)-6-amino-s-triazine (OIET), 2-chloro-4-(isopropylamino)-6-amino-s-triazine (CIAT), 2-chloro-4-amino-6-(ethylamino)-s-triazine (CAET), 2-hydroxy-4,6-diamino-s-triazine (OAAT), and 2-hydroxy-4-hydroxy-6-amino-s-triazine (OOAT) among others. The final products for both methods, US and photolysis with POM, were cyanuric acid (OOOT), NO3-, Cl-, CO2, and H2O. OOOT showed no signs of decomposition by sonication and/or photolysis with POM. It also resisted degradation upon photolysis with plain UV light (254 nm). However, it has been reported to decompose upon photolysis with lambda > 200 nm. Combination of US and photolysis with POM produces only a cumulative effect.

Determination of organochlorine pesticide residues in honey, applying solid phase extraction with RP-C18 material.

In this study, a new clean up method was developed for the routine multiresidue determination of organochlorine pesticide residues in honey. The analytical procedure requires sample extraction with methanol, followed by a clean up step through a C18 Sep-Pak cartridge. Finally, pesticides are eluted with hexane. The determination of organochlorine pesticide residues was performed by capillary gas chromatography with electron capture detection. The mean recoveries of 18 organochlorine pesticides were estimated at various concentrations and found very efficient in most cases. The detection limits were found to be between 0.05 and 0.20 microgram kg-1.