Carboxymethyl cellulose-based rotigotine nanocrystals-loaded hydrogel for increased transdermal delivery with alleviated skin irritation.

Transdermal rotigotine (RTG) therapy is prescribed to manage Parkinson's disease (Neupro® patch). However, its use is suffered from application site reactions. Herein, drug nanocrystalline suspension (NS)-loaded hydrogel (NS-HG) employing polysaccharides simultaneously as suspending agent and hydrogel matrix was constructed for transdermal delivery, with alleviated skin irritation. RTG-loaded NS-HG was prepared using a bead-milling technique, employing sodium carboxylmethyl cellulose (Na.CMC) as nano-suspending agent (molecular weight 90,000 g/mol) and hydrogel matrix (700,000 g/mol), respectively. NS-HG was embodied as follows: drug loading: ≤100 mg/mL; shape: rectangular crystalline; crystal size: <286.7 nm; zeta potential: -61 mV; viscosity: <2.16 Pa·s; and dissolution rate: >90 % within 15 min. Nuclear magnetic resonance analysis revealed that the anionic polymers bind to RTG nanocrystals via charge interaction, affording uniform dispersion in the matrix. Rodent transdermal absorption of RTG from NS-HG was comparable to that from microemulsions, and proportional to drug loading. Moreover, NS-HG was skin-friendly; erythema and epidermal swelling were absent after repeated application. Further, NS-HG was chemically stable; >95 % of the drug was preserved up to 4 weeks under long term (25 °C/RH60%), accelerated (40 °C/RH75%), and stress (50 °C) storage conditions. Therefore, this novel cellulose derivative-based nanoformulation presents a promising approach for effective transdermal RTG delivery with improved tolerability.

Design of High-Payload Ascorbyl Palmitate Nanosuspensions for Enhanced Skin Delivery.

A high-payload ascorbyl palmitate (AP) nanosuspension (NS) was designed to improve skin delivery following topical application. The AP-loaded NS systems were prepared using the bead-milling technique, and softly thickened into NS-loaded gel (NS-G) using hydrophilic polymers. The optimized NS-G system consisted of up to 75 mg/mL of AP, 0.5% w/v of polyoxyl-40 hydrogenated castor oil (Kolliphor® RH40) as the suspending agent, and 1.0% w/v of sodium carboxymethyl cellulose (Na.CMC 700 K) as the thickening agent, in citrate buffer (pH 4.5). The NS-G system was embodied as follows: long and flaky nanocrystals, 493.2 nm in size, -48.7 mV in zeta potential, and 2.3 cP of viscosity with a shear rate of 100 s-1. Both NS and NS-G provided rapid dissolution of the poorly water-soluble antioxidant, which was comparable to that of the microemulsion gel (ME-G) containing AP in solubilized form. In an ex vivo skin absorption study using the Franz diffusion cell mounted on porcine skin, NS-G exhibited faster absorption in skin, providing approximately 4, 3, and 1.4 times larger accumulation than that of ME-G at 3, 6, and 12 h, respectively. Therefore, the high-payload NS makes it a promising platform for skin delivery of the lipid derivative of ascorbic acid.

Novel bioequivalent oral disintegrating tablet of aripiprazole prepared by direct compression technique with shortened disintegration time.

Herein, we aimed to formulate a novel oral disintegrating tablet (ODT) of aripiprazole (ARP) capable of rapid disintegration using a direct compression technique. Different ODTs were fabricated with directly compressible excipients, and their disintegration time, wettability (water absorption ratio and wetting time), and mechanical properties (hardness and friability) were evaluated. The optimized ODT comprised F-Melt® type C, Prosolv® SMCC HD90, and Na croscarmellose (10 mg of ARP in a 130 mg tablet). The ODT with 3.1-5.2 kp hardness exhibited rapid disintegration (14.1-17.2 sec), along with appropriate mechanical strength (friability < 0.24%). In a bioequivalent study in Korean healthy subjects (randomized, single-dose, two-period crossover design, n = 37), the novel ODT offered the equivalent pharmacokinetic profile to that of a conventional immediate release tablet (Otsuka, Abilify®, Japan), despite different disintegration and dissolution profiles. The 90% confidence intervals of the geometric mean test to reference ratios considering the area-under-the-curve and maximum plasma drug concentrations were 1.0306-11051 and 0.9448-1.1063, respectively, satisfying FDA regulatory criteria for bioequivalence. The novel ART ODT was physicochemically stable under the accelerated storage condition (40 °C, RH75%) for 24 weeks. Therefore, the novel ARP-loaded ODT is expected to be an alternative to oral ARP therapy, providing improved patient adherence.

Novel Bioequivalent Tablet of Solifenacin Succinate Prepared Using Direct Compression Technique for Improved Chemical Stability.

We designed a bioequivalent tablet form of solifenacin succinate (SOL) with an improved storage stability using a direct compression (DC) technique. An optimal direct compressed tablet (DCT) containing an active substance (10 mg), lactose monohydrate, and silicified microcrystalline cellulose as diluents, crospovidone as a disintegrant, and hydrophilic fumed silica as an anti-coning agent was constructed by evaluating the drug content uniformity, mechanical properties, and in vitro dissolution. The physicochemical and mechanical properties of the DCT were as follows: drug content 100.1 ± 0.7%, disintegration time of 6.7 min, over 95% release within 30 min in dissolution media (pH 1.2, 4.0, 6.8, and distilled water), hardness > 107.8 N, and friability ~0.11%. The SOL-loaded tablet fabricated via DC showed an improved stability at 40 °C and RH 75%, exhibiting markedly reduced degradation products compared to those fabricated using ethanol or water-based wet granulation or a marketed product (Vesicare®, Astellas Pharma). Moreover, in a bioequivalence study in healthy subjects (n = 24), the optimized DCT offered a pharmacokinetic profile comparable to that of the marketed product, with no statistical differences in the pharmacokinetic parameters. The 90% CIs for the geometric mean ratios of the test to the reference formulation for the area under the curve and the maximum drug concentration in plasma were 0.98-1.05 and 0.98-1.07, respectively, and satisfied the FDA regulatory criteria for bioequivalence. Thus, we conclude that DCT is a beneficial oral dosage form of SOL with an improved chemical stability.

Neutral Oil-Incorporated Liposomal Nanocarrier for Increased Skin Delivery of Ascorbic Acid.

In this study, a neutral oil-incorporated liposomal system (lipo-oil-some, LOS) was designed to improve the skin absorption of ascorbic acid (Vit C), and the effects of an edge activator and neutral oil on the skin absorption of Vit C were evaluated. As components of the LOS system, sodium deoxycholate, polysorbate 80, and cholesterol were screened as edge activators, and camellia oil, tricaprylin, and grapeseed oil were employed as neutral oils. The LOS systems prepared by the ethanol injection method were spherical in shape, 130-350 nm in size, and had 4-27% Vit C loading efficiency (%). In a skin absorption study using a Franz diffusion cell mounted with porcine skin, the LOS system prepared with sodium deoxycholate (10 w/w% of phospholipid) exhibited 1.2-and 2.9-fold higher absorption than those prepared with polysorbate 80 and cholesterol, respectively. Moreover, the type of neutral oil had a marked effect on the absorption of Vit C; the liposomal system containing camellia oil provided 1.3 to 1.8 times higher flux (45.4 µg/cm2∙h) than vesicles with tricaprylin or grapeseed oil, respectively. The optimized lipid nanocarrier is expected to be a promising tool for promoting the skin absorption of Vit C and improving its dermatological functions.

Design of Novel Tricaprylin-Incorporated Multi-Layered Liposomal System for Skin Delivery of Ascorbic Acid with Improved Chemical Stability.

L-ascorbic acid (Vit C) possesses a variety of dermatological functions in maintaining skin health and anti-aging properties. However, its topical application is challenging owing to its liability to light, oxygen, or heat. Therefore, in this study, a novel liposomal system, including a lipophilic neutral oil named a lipo-oil-some (LOS), was designed to improve the chemical stability and aid the skin absorption of Vit C. The vesicular systems were prepared using the ethanol injection method, employing phosphatidylcholine, cholesterol, dipalmitoyl-sn-glycerol-3-phosphoglycerol, and tricaprylin as neutral oil. The optimized LOS was characterized as follows: shape, multi-layered sphere; size, 981 nm; zeta potential, -58 mV; and Vit C encapsulation efficiency, 35%. The encapsulation of the labile compound into the novel system markedly enhanced photostability, providing over 10% higher Vit C remaining compared to Vit C solution or Vit C-loaded conventional liposome under a light intensity of 20,000 lx. On the other hand, the ex vivo skin permeation and accumulation of Vit C with the LOS system were comparable to those of smaller conventional liposomes (198 nm) in a Franz diffusion cell model mounted with porcine skin. Based on these findings, we concluded that the novel liposomal system could be utilized for skin delivery of Vit C with enhanced chemical stability.

Effect of Dispersion Medium on Pharmacokinetic Profile of Rotigotine Crystalline Suspension following Subcutaneous Injection.

Rotigotine (RTG) is prescribed as a once-daily transdermal patch for managing early Parkinson's disease (PD), which presents issues such as skin irritation and poor patient adherence. Therefore, the aims of the present study were to formulate aqueous and oily vehicle-based RTG crystalline suspensions for prolonged delivery and to compare their pharmacokinetic profiles and the local behaviors of RTG crystals. RTG-loaded aqueous (AS) and oil suspensions (OS) were fabricated using bead-milling technology (100 mg/mL as RTG), employing carboxymethyl cellulose and sesame oil as suspending agent and oily vehicle, respectively. RTG AS and OS exhibited comparable physical properties in terms of particle size (about 800−900 nm), crystallinity, and dissolution profile, despite higher drug solubility in OS than AS (19.6 and 0.07 mg/mL, respectively). However, AS and OS exhibited markedly distinctive local distribution and inflammatory responses at the injection site, which further promoted different pharmacokinetic patterns following subcutaneous injection in rats. With OS, no drug aggregates were observed with prolonged persistence of the Sudan III-stained oily vehicle at the injection site. In contrast, with AS injection, drug clusters > 7 mm were formed, followed by an enclosure with macrophages and a fibroblastic band. Accordingly, AS exhibited a protracted pharmacokinetic profile over 3 weeks, with prolonged elimination half-life. The local inflammatory response caused by AS injection was almost alleviated after 3 weeks post-dosing. Based on these findings, we conclude that RTG AS system can be a platform to design sophisticated long-acting delivery systems with extended dosing intervals to manage PD.

Design of Montelukast Nanocrystalline Suspension for Parenteral Prolonged Delivery.

Background: Montelukast (MTK), a representative leukotriene receptor antagonist, is currently being investigated as a potential candidate for treating Alzheimer's disease. For potent and effective dosing in elderly patients, a parenteral prolonged delivery system is favored, with improved medication adherence with reduced dosage frequency. Purpose: This study aimed to design a nanocrystalline suspension (NS)-based MTK prolonged delivery system and evaluate its pharmacokinetics profile and local tolerability following subcutaneous administration. Methods: To decelerate the dissolution rate, the amorphous MTK raw material was transformed into a crystalline state using a solvent-mediated transformation method and subsequently formulated into NS using a bead-milling technique. The MTK NSs were characterized by morphology, particle size, crystallinity, and in vitro dissolution profiles. The pharmacokinetic profile and local tolerability at the injection site following subcutaneous injection of MTK suspension were evaluated in rats. Results: Microscopic and physical characterization revealed that the amorphous MTK powder was lucratively transformed into a crystalline form in acidic media (pH 4). MTK crystalline suspensions with different diameters (200 nm, 500 nm, and 3 µm) were uniformly prepared using bead-milling technology, employing polysorbate 80 as suspending agent. Prepared crystalline suspensions exhibited analogous crystallinity (melting point, 150°C) and size-dependent in vitro dissolution profiles. MTK NSs with particle sizes of 200 nm and 500 nm provided a protracted pharmacokinetic profile for up to 4 weeks in rats, with a higher maximum drug concentration in plasma than the 3 µm-sized injectable suspensions. Histopathological examination revealed that MTK NS caused chronic granulomatous inflammation at the injection site, which resolved after 4 weeks. Conclusion: The MTK parenteral NS delivery system is expected to be a valuable tool for treating Alzheimer's disease with extended dose intervals.

Effect of particle size on in vivo performances of long-acting injectable drug suspension.

Herein, entecavir-3-palmitate (EV-P), an ester prodrug of entecavir (EV), was employed as a model drug, and the effect of drug particle size on in vivo pharmacokinetic profiles and local inflammatory responses, and those associations were evaluated following intramuscular (IM) injection. EV-P crystals with different median diameters (0.8, 2.3, 6.3, 15.3 and 22.6 µm) were prepared using the anti-solvent crystallization method, with analogous surface charges (-10.7 ~ -4.7 mV), and crystallinity (melting point, 160-170 °C). EV-P particles showed size-dependent in vitro dissolution profiles under sink conditions, exhibiting a high correlation between the median diameter and Hixon-Crowell's release rate constant (r2 = 0.94). Following IM injection in rats (1.44 mg/kg as EV), the pharmacokinetic profile of EV exhibited marked size-dependency; 0.8 µm-sized EV-P particles about 1.6-, 3.6-, and 5.6-folds higher systemic exposure, compared to 6.3, 15.3, and 22.6 µm-sized particles, respectively. This pharmacokinetic pattern, depending on particle size, was also highly associated with histopathological responses in the injected tissue. The smaller EV-P particles (0.8 or 2.3 µm) imparted the larger inflammatory lesion after 3 days, lower infiltration of inflammatory cells, and thinner fibroblastic bands around depots after 4 weeks. Conversely, severe fibrous isolation with increasing particle size augmented the drug remaining at injection site over 4 weeks, impeding the dissolution and systemic exposure. These findings regarding the effects of formulation variable on the in vivo behaviors of long-acting injectable suspension, provide constructive knowledge toward the improved design in poorly water-soluble compounds.

Montelukast microsuspension with hypromellose for improved stability and oral absorption.

Oral montelukast (MTK) is prescribed to treat asthma or rhinitis, and is clinically investigated as new medication in the treatment of Alzheimer's dementia. Herein, in order to better patient's compliance, microsuspensions (MSs)-based oral liquid preparations of montelukast (MTK) were formulated with polymeric suspending agents including hypromellose (HPMC), and those drug-polymer interaction, physicochemical stability, dissolution, and in vivo pharmacokinetic profile was evaluated. When amorphous MTK particle was suspended in aqueous vehicle, it was readily converted into crystalline form and grown into aggregates, drastically lowering dissolution rate. However, the addition of HPMC polymer markedly suppressed the crystal growth, providing both improved drug stability and profound dissolution profile. Raman spectrometry denoted the inter-molecular hydrogen boding between MTK particle and HPMC polymer. The crystal growth or dissolution profile of MSs was markedly affected by pharmaceutical additives (sucrose or simethicone) in the preparations or storage temperature. The optimized HPMC-based MS exhibited over 80% higher bioavailability, compared to marketed granule (Singulair®) in rats. Therefore, novel MTK-loaded MS can be a promising liquid preparation, bettering oral absorption and patient's compliance.

Effect of Penetration Enhancers on Toenail Delivery of Efinaconazole from Hydroalcoholic Preparations.

The incorporation of permeation enhancers in topical preparations has been recognized as a simple and valuable approach to improve the penetration of antifungal agents into toenails. In this study, to improve the toenail delivery of efinaconazole (EFN), a triazole derivative for onychomycosis treatment, topical solutions containing different penetration enhancers were designed, and the permeation profiles were evaluated using bovine hoof models. In an in vitro permeation study in a Franz diffusion cell, hydroalcoholic solutions (HSs) containing lipophilic enhancers, particularly prepared with propylene glycol dicaprylocaprate (Labrafac PG), had 41% higher penetration than the HS base. Moreover, the combination of hydroxypropyl-ß-cyclodextrin with Labrafac PG further facilitated the penetration of EFN across the hoof membrane. In addition, this novel topical solution prepared with both lipophilic and hydrophilic enhancers was physicochemically stable, with no drug degradation under ambient conditions (25 °C, for 10 months). Therefore, this HS system can be a promising tool for enhancing the toenail permeability and therapeutic efficacy of EFN.

Montelukast Nanocrystals for Transdermal Delivery with Improved Chemical Stability.

A novel nanocrystal system of montelukast (MTK) was designed to improve the transdermal delivery, while ensuring chemical stability of the labile compound. MTK nanocrystal suspension was fabricated using acid-base neutralization and ultra-sonication technique and was characterized as follows: approximately 100 nm in size, globular shape, and amorphous state. The embedding of MTK nanocrystals into xanthan gum-based hydrogel caused little changes in the size, shape, and crystalline state of the nanocrystal. The in vitro drug release profile from the nanocrystal hydrogel was comparable to that of the conventional hydrogel because of the rapid dissolution pattern of the drug nanocrystals. The drug degradation under visible exposure (400-800 nm, 600,000 lux·h) was markedly reduced in case of nanocrystal hydrogel, yielding only 30% and 50% amount of cis-isomer and sulfoxide as the major degradation products, as compared to those of drug alkaline solution. Moreover, there was no marked pharmacokinetic difference between the nanocrystal and the conventional hydrogels, exhibiting equivalent extent and rate of drug absorption after topical administration in rats. Therefore, this novel nanocrystal system can be a potent tool for transdermal delivery of MTK in the treatment of chronic asthma or seasonal allergies, with better patient compliance, especially in children and elderly.

Quantitative assessment of steroid amount in the tissue after epidural steroid injection: a new rabbit model.

BACKGROUND: To develop a rabbit epidural steroid injection (ESI) model for analyzing steroid retention in the tissue, and to assess the difference in steroid retention in the model according to the location and time elapsed after ESI. METHODS: Fluoroscopy-guided ESI was performed using the interlaminar approach between the lowest two lumbar segments in 13 female New Zealand white rabbits. Four rabbits were allocated to each of three different groups according to the time of sacrifice: 3, 7, and 15 days post-ESI; the remaining rabbit was sacrificed immediately post-ESI to obtain baseline data. After sacrifice, two segments were harvested: the lowest two lumbar vertebrae and another two lumbar vertebrae immediately above these. The residual steroid amount (RSA) and residual steroid concentration (RSC) in the collected spinal columns were analyzed. A linear mixed model was used to compare RSAs and RSCs between the injected and adjacent segments, and among the number of days until sacrifice; P < 0.05 was considered statistically significant. RESULTS: Both RSA and RSC of the injected segment were significantly higher than those of the adjacent segment (P < 0.001, both). The RSA and RSC significantly decreased over time (P = 0.009 and P = 0.016, respectively). CONCLUSIONS: The developed rabbit ESI model verified that significantly more steroid was retained at the injected segment than at the adjacent segment and the residual steroid decreased over time. This model could be useful not only for comparing current steroid medications, but also for developing new, better steroid formulations.

Design and In Vivo Pharmacokinetic Evaluation of Triamcinolone Acetonide Microcrystals-Loaded PLGA Microsphere for Increased Drug Retention in Knees after Intra-Articular Injection.

A novel polymeric microsphere (MS) containing micronized triamcinolone acetonide (TA) in a crystalline state was structured to provide extended drug retention in joints after intra-articular (IA) injection. Microcrystals with a median diameter of 1.7 µm were prepared by ultra-sonication method, and incorporated into poly(lactic-co-glycolic acid)/poly(lactic acid) (PLGA/PLA) MSs using spray-drying technique. Cross-sectional observation and X-ray diffraction analysis showed that drug microcrystals were evenly embedded in the MSs, with a distinctive crystalline nature of TA. In vitro drug release from the novel MSs was markedly decelerated compared to those from the marketed crystalline suspension (Triam inj.®), or even 7.2 µm-sized TA crystals-loaded MSs. The novel system offered prolonged drug retention in rat joints, providing quantifiable TA remains over 28 days. Whereas, over 95% of IA TA was removed from joints within seven days, after injection of the marketed product. Systemic exposure of the steroidal compound was drastically decreased with the MSs, with <50% systemic exposure compared to that with the marketed product. The novel MS was physicochemically stable, with no changes in drug crystallinity and release profile over 12 months. Therefore, the TA microcrystals-loaded MS is expected to be beneficial in patients especially with osteoarthritis, with reduced IA dosing frequency.

Pharmacokinetics and four-week repeated-dose toxicity of hyaluronic acid and ketorolac combination following intra-articular administration in normal rats.

Intra-articular (IA) injection of hyaluronic acid (HA) in combination with nonsteroidal anti-inflammatory drugs, such as ketorolac (KL), have been clinically investigated to provide more rapid and profound pain relief in patients with osteoarthritis. However, its safety, local tolerance, and potential for pharmacokinetic interaction have not been assessed. In this study, the pharmacokinetics and toxicity of a combination of HA and KL were evaluated in normal rats following four-week repeated-dose injection. Rats received HA or KL alone at 4 mg/kg or 16 mg/kg, respectively, or HA/KL combination at 4/4 mg/kg, 4/8 mg/kg, or 4/16 mg/kg on a weekly basis. The rats exhibited temporal, reversible changes in hematology, serum chemistry, and urinalysis caused primarily by KL treatment. No deleterious effects were observed on the joint following repeated IA HA/KL administration, which showed only minimal to mild levels of temporary inflammatory changes in synovial membrane. The plasma KL level following IA injection rose as fast as that of intra-muscular injection, with no alteration with the co-administered HA. In conclusion, repeated IA administration of HA/KL combination was tolerated well in normal rats, encouraging future studies of IA injection of HA/KL combination on osteoarthritis-induced animal models and even patients.

Novel Extended-Release Multiple-Unit System of Imidafenacin Prepared by Fluid-Bed Coating Technique.

The objective of this study was to formulate once-a-day extended-release (ER) pellet system of imidafenacin (IDN), a recently approved urinary antispasmodic agent with twice-a-day dosing regimen. The sugar sphere pellets were firstly layered with IDN and hypromellose and then coated with Eudragit RS (copolymers of acrylic and methacrylic acid esters), employed as a release modifier, using a fluid-bed coater. Solid-state characterizations using solid-state X-ray diffraction and differential scanning calorimeter indicated that the antispasmodic agent was homogeneously layered onto the pellets in an amorphous state. Drug release from multiple-unit ER system was effectively retarded in proportion to the amount of Eudragit RS in the outer layer, with a high correlation value above 0.86. In a pharmacokinetic evaluation in beagle dogs, the plasma concentration profile of IDN was markedly protracted by ER pellets, exhibiting delayed the time needed to reach the maximum drug concentration and the elimination half-life in plasma, compared to the commercial immediate release form (Uritos® tablet, Kyorin Pharmaceutical Co., Ltd., Japan). Therefore, the novel ER pellets can be a promising tool for oral IDN therapy, providing a once-a-day dosing regimen, and thus, improving patient compliance.

Design and in vivo evaluation of entecavir-3-palmitate microcrystals for subcutaneous sustained delivery.

The objectives of this study were to formulate microcrystals of entecavir-3-palmiate (EV-P), a palmitic acid ester of entecavir (EV), and evaluate the influence of particle size on its pharmacokinetic behavior following subcutaneous (SC) injection. Systemic toxicity and local tolerability of the hepatitis B anti-viral suspension were further evaluated in normal rats. EV-P microcrystals possessing median diameters of 2.1, 6.3, and 12.7 µm were fabricated using anti-solvent crystallization technique with polysorbate 20 and polyethylene glycol 4000 as steric stabilizer. Dissolution rate of EV-P microcrystals was controlled by adjusting the particle size, under sink condition. Pharmacokinetic profiles of 2.1 µm-sized and 6.3 µm-sized EV-P microcrystals were quite comparable (1.44 mg/kg as EV), over 46 days in rats. The absorption rate and extent of EV after SC injection of 12.7 µm-sized microcrystals were significantly retarded, due to its slower dissolution rate in aqueous media. No single-dose systemic toxicity was observed after SC injection of high dose of EV-P microcrystal suspension (30-300 mg/kg as EV). The microcrystals were tolerable in the injected site, showing mild inflammatory responses at a dose of 30 mg/kg. Therefore, the novel microcrystal system with median particle size of below 6.3 µm is expected to be a unique long-acting system of the anti-viral agent, improving patient's compliance with chronic disease.

Synthesis and Physicochemical Evaluation of Entecavir-Fatty Acid Conjugates in Reducing Food Effect on Intestinal Absorption.

The oral bioavailability of entecavir (EV), an anti-viral agent commonly prescribed to treat hepatitis B infections, is drastically reduced under a post-prandial state. This is primarily due to its low permeability in the gastrointestinal tract. To reduce the food effect on the intestinal absorption of the nucleotide analogue, four lipidic prodrugs were synthesized via the esterification of the primary alcohol of EV with fatty acids (hexanoic acid, octanoic acid, decanoic acid, and dodecanoic acid). EV-3-dodecanoate (or EV-C12) exhibited high solubility in a fed state simulated intestinal fluid (78.8 µg/mL), with the acceptable calculated logP value (3.62) and the lowest hydrolysis rate (22.5% for 12 h in simulated gastric fluid, pH 1.2). Therefore, it was chosen as a candidate to improve intestinal absorption of EV, especially under a fed state condition. Physical characterization using scanning electron microscopy, a differential scanning calorimeter, and X-ray powder diffraction revealed that EV-C12 had a rectangular-shaped crystalline form, with a melting point of about 170 °C. In a release test in biorelevant media, such as fasted and fed state-simulated intestinal and/or gastric fluid, more than 90% of the prodrug was released within 2 h in all media tested. These data suggest that this lipidic prodrug might have the potential to alleviate the negative food effect on the intestinal absorption of EV with increased therapeutic efficacy and patient compliance.

Microsuspension of fatty acid esters of entecavir for parenteral sustained delivery.

Entecavir (EV), an anti-viral agent for hepatitis B infection, should be administered under fasted state, as intestinal absorption of this hydrophilic compound is markedly decreased under post-prandial conditions. Herein, in order to improve therapeutic adherence, a parenteral sustained delivery system was constructed, by synthesizing water-insoluble ester prodrugs of the nucleotide analogous with fatty acids. EV-3-palmitate (named EV-P), exhibited the lowest solubility in phosphate buffered saline (pH 7.4, 1.1 µg/ml), with extended release profile compared with EV, EV-3-myristate, and EV-3-stearate, was selected as a candidate to formulate drug suspension. The crystalline suspension was fabricated using anti-solvent crystallization technique, with a mean particle size of 7.7 µm. After subcutaneous (SC) injection in beagle dogs (0.43 mg/kg as EV), the plasma concentrations of EV were markedly protracted with lowered maximum plasma concentration (Cmax, 4.7 ng/ml), extended time required to reach Cmax (Tmax, 9.0 days), and lengthened elimination half-life (T1/2, 129.3 h) compared with those after oral administration (0.0154 mg/kg, Cmax, 15.4 ng/ml; Tmax, 0.01 days; T1/2, 4.1 h). The systemic exposure of the lipidic prodrug was below 0.1% compared with that of EV following SC injection, denoting that EV-P was rapidly converted into the parent compound in blood. Therefore, SC delivery of EV-P microsuspension can be an alternative to oral EV therapy, offering prolonged pharmacokinetic profile after single injection.

Formulation and in vivo pharmacokinetic evaluation of ethyl cellulose-coated sustained release multiple-unit system of tacrolimus.

A novel once-a-day sustained-release (SR) system of tacrolimus (FK506), a poorly water-soluble immunosuppressive agent, was designed employing ethyl cellulose (EC) polymer as release retardant. Drug (5 mg) was layered onto sugar spheres (518.3 mg) with hypromellose (5 mg), to transform the drug from a crystalline to an amorphous form. Subsequently, the drug-layered pellets were recoated with EC polymer (0.5-1.5 mg) using a fluid bed granulator. Drug release from the reservoir-type pellets was markedly impeded by the outer EC-based coating layer (EC 1 mg), displaying about 60% of drug release after 8 h, regardless of the acidity of the media. In an in vivo pharmacokinetic study in fasted Cynomolgus monkeys, the drug level in blood was gradually increased over 4.7 h and high drug concentration was maintained until 24 h, with an elimination half-life of 16.6 h. There were no statistical differences between the novel SR pellets and the recently marketed SR capsule (Advagraf®, Astellas Pharma, Japan) in terms of maximum blood concentration, area under the curve, and half-life values, in both fasted and fed states. Therefore, the novel EC-coated pellets are expected to be bioequivalent to the commercial SR capsule, providing a once-daily dosing regimen in patients with allogenic rejection.