ABSTRACT
Ultrafast, high sensitive, low cost photodetectors operating at room temperature sensitive from the deep-ultraviolet to mid-infrared region remain a significant challenge in optoelectronics. Achievements in traditional semiconductors using cryogenic operation and complicated growth processes prevent the cost-effective and practical application of broadband detectors. Alternative methods towards high-performance photodetectors, hybrid graphene-semiconductor colloidal quantum dots have been intensively explored. However, the operation of these photodetectors has been limited by the spectral bandwidth and response time. Here, we have demonstrated hybrid photodetectors operating from the deep-ultraviolet to the mid-infrared region with high sensitivity and ultrafast response by coupling graphene with a p-type semiconductor photosensitizer, nitrogen-doped Ta2O5 thin film. Photons with energy higher than the energy of the defect centers release holes from neutral acceptors. The holes are transferred into graphene, leaving behind ionized acceptors. Due to the advantage of two-dimensional heterostructure including homogeneous thickness, extending in a two-dimensional plane, large contact area between the N-Ta2O5 thin film and graphene, and the high mobility of carriers in graphene, holes are transferred rapidly to graphene and recirculated during the long lifetime of ionized acceptors. The photodetectors achieve a high photo-responsivity (up to 3.0 × 106 A W-1), ultrafast rise time (faster than 20 ns), and a specific detectivity (up to â¼2.2 × 1012 Jones). The work provides a method for achieving high-performance optoelectronics operating in the deep-ultraviolet to mid-infrared region.
ABSTRACT
The fast degradation rate and poor wear resistance of magnesium (Mg) alloys in physiological environments have limited their potential usage as next-generation biodegradable orthopedic implant materials. In this work, femtosecond laser shock peening (fs-LSP) was successfully applied to simultaneously improve the surface mechanical, corrosion, and tribocorrosion properties of WE43 Mg alloys in blood bank buffered saline solution at body temperature. Specifically, the treated surfaces of WE43 Mg alloys via fs-LSP with ultralow pulse energy were investigated under different power densities, confining mediums, and absorbent materials. It was found that the combination of a black tape and a quartz layer gave the optimum peening effect under a power density of 28 GW/cm2, which simultaneously strengthened the surface and reduced the corrosion kinetics. In addition, a rapid self-repassivation was observed in fs-LSP-treated WE43 surfaces during tribocorrosion, promising sustained corrosion resistance under mechanical loading, critical to the reliability of load-bearing implants. Finally, the subsurface microstructural evolution and residual stress development in WE43 after fs-LSP were discussed based on the results from transmission electron microscopy analysis and finite element simulations.
