Lignin Films from Spruce, Eucalyptus, and Wheat Straw Studied with Electroacoustic and Optical Sensors: Effect of Composition and Electrostatic Screening on Enzyme Binding.

Lignins were isolated from spruce, wheat straw, and eucalyptus by using the milled wood lignin (MWL) method. Functional groups and compositional analyses were assessed via 2D NMR and 31P NMR to realize their effect on enzyme binding. Films of the lignins were fabricated and ellipsometry, atomic force microscopy, and water contact angle measurements were used for their characterization and to reveal the changes upon enzyme adsorption. Moreover, lignin thin films were deposited on quartz crystal microgravimetry (QCM) and surface plasmon (SPR) resonance sensors and used to gain further insights into the lignin-cellulase interactions. For this purpose, a commercial multicomponent enzyme system and a monocomponent Trichoderma reesei exoglucanase (CBH-I) were considered. Strong enzyme adsorption was observed on the various lignins but compared to the multicomponent cellulases, CBH-I displayed lower surface affinity and higher binding reversibility. This resolved prevalent questions related to the affinity of this enzyme with lignin. Remarkably, a strong correlation between enzyme binding and the syringyl/guaiacyl (S/G) ratio was found for the lignins, which presented a similar hydroxyl group content (31P NMR): higher protein affinity was determined on isolated spruce lignin (99% G units), while the lowest adsorption occurred on isolated eucalyptus lignin (70% S units). The effect of electrostatic interactions in enzyme adsorption was investigated by SPR, which clearly indicated that the screening of charges allowed more extensive protein adsorption. Overall, this work furthers our understanding of lignin-cellulase interactions relevant to biomass that has been subjected to no or little pretreatment and highlights the widely contrasting effects of the nature of lignin, which gives guidance to improve lignocellulosic saccharification and related processes.

Bicomponent lignocellulose thin films to study the role of surface lignin in cellulolytic reactions.

Ultrathin bicomponent films of cellulose and lignin derivatives were deposited on silica supports by spin coating, and after conversion into the respective polymer precursor, they were used as a model system to investigate interfacial phenomena relevant to lignocellulose biocatalysis. Film morphology, surface chemical composition, and wettability were determined by atomic force microscopy, X-ray photoelectron spectroscopy, and water contact angle, respectively. Phase separation of cellulose and lignin produced structures that resembled the cell wall of fibers and were used to monitor enzyme binding and cellulolytic reactions via quartz crystal microgravimetry. The rate and extent of hydrolysis was quantified by using kinetic models that indicated the role of the surface lignin domains in enzyme inhibition. Hydrophobic interactions between cellulases and the substrates and their critical role on irreversible adsorption were elucidated by using acetylated lignin films with different degrees of substitution. Overall, it is concluded that sensors based on the proposed ultrathin films of lignocellulose can facilitate a better understanding of the complex events that occur during bioconversion of cellulosic biomass.

Piezoelectric Effect of Cellulose Nanocrystals Thin Films.

Ultrathin films of aligned cellulose nanocrystals (CNCs) were assembled on mica supports by using electric field-assisted shear. The relationship between polarization gradients and strain mechanics of the obtained films was examined by monitoring their deflection with an atomic force microscope operated in contact mode. The piezoelectric response of the films was ascribed to the collective contribution of the asymmetric crystalline structure of the cellulose crystals. The magnitude of the effective shear piezoelectric constant (d25) of highly ordered CNC films was determined to be 2.1 Å/V, which is comparable to that of a reference film of a piezoelectric metal oxide.

Rapid and Complete Enzyme Hydrolysis of Lignocellulosic Nanofibrils.

Rapid enzymatic saccharification of lignocellulosic nanofibrils (LCNF) was investigated by monitoring nanoscale changes in mass via quartz crystal microgravimetry and also by measuring reducing sugar yields. In only a few minutes LCNF thin films were completely hydrolyzed upon incubation in multicomponent enzyme systems. Conversion to sugars and oligosaccharides of LCNF dispersed in water occurred in about 4 h (50 °C, pH 5). In contrast, a conversion of only 57% was observed for partially crystalline cellulose (Avicel) after 9 h, under same experimental conditions. Under conditions of high enzyme loading the presence of residual lignin and other macromolecules in the cell wall of LCNF did not appear to affect negatively the recorded high hydrolysis rates. Overall, our findings suggest that deconstruction of the cell wall to nanofibrils is an effective pretreatment to facilitate rapid and complete cellulose bioconversion.

Dielectrophoresis of cellulose nanocrystals and alignment in ultrathin films by electric field-assisted shear assembly.

Ultrathin films of cellulose nanocrystals (CNCs) are obtained by using a convective assembly setup coupled with a low-strength external AC electric field. The orientation and degree of alignment of the rod-like nanoparticles are controlled by the applied field strength and frequency used during film formation. Calculated dipole moments and Clausius-Mossotti factors allowed the determination of the critical frequencies, the peak dielectrophoresis as well as the principal orientation of the CNCs in the ultrathin films. As a result of the combination of shear forces and low electric field highly ultrathin films with controlled, unprecedented CNC alignment are achieved.