Spotting priming-active compounds using parsley cell cultures in microtiter plates.

BACKGROUND: Conventional crop protection has major drawbacks, such as developing pest and pathogen insensitivity to pesticides and low environmental compatibility. Therefore, alternative crop protection strategies are needed. One promising approach treats crops with chemical compounds that induce the primed state of enhanced defense. However, identifying priming compounds is often tedious as it requires offline sampling and analysis. High throughput screening methods for the analysis of priming-active compounds have great potential to simplify the search for such compounds. One established method to identify priming makes use of parsley cell cultures. This method relies on measurement of fluorescence of furanocoumarins in the final sample. This study demonstrates for the first time the online measurement of furanocoumarins in microtiter plates. As not all plants produce fluorescence molecules as immune response, a signal, which is not restricted to a specific plant is required, to extend online screening methods to other plant cell cultures. It was shown that the breathing activity of primed parsley cell cultures increases, compared to unprimed parsley cell cultures. The breathing activity can by monitored online. Therefore, online identification of priming-inducing compounds by recording breathing activity represents a promising, straight-forward and highly informative approach. However, so far breathing has been recorded in shake flasks which suffer from low throughput. For industrial application we here report a high-throughput, online identification method for identifying priming-inducing chemistry. RESULTS: This study describes the development of a high-throughput screening system that enables identifying and analyzing the impact of defense priming-inducing compounds in microtiter plates. This screening system relies on the breathing activity of parsley cell cultures. The validity of measuring the breathing activity in microtiter plates to drawing conclusions regarding priming-inducing activity was demonstrated. Furthermore, for the first time, the fluorescence of the priming-active reference compound salicylic acid and of furanocoumarins were simultaneously monitored online. Dose and time studies with salicylic acid-treated parsley cell suspensions revealed a wide range of possible addition times and concentrations that cause priming. The online fluorescence measuring method was further confirmed with three additional compounds with known priming-causing activity. CONCLUSIONS: Determining the OTR, fluorescence of the priming-active chemical compound SA and of furanocoumarins in parsley suspension cultures in MTPs by online measurement is a powerful and high-throughput tool to study possible priming compounds. It allows an in-depth screening for priming compounds and a better understanding of the priming process induced by a given substance. Evaluation of priming phenomena via OTR should also be applicable to cell suspensions of other plant species and varieties and allow screening for priming-inducing chemical compounds in intact plants. These online fluorescence methods to measure the breathing activity, furanocoumarin and SA have the potential to accelerate the search for new priming compounds and promote priming as a promising, eco-friendly crop protection strategy.

Online measurement of the viscosity in shake flasks enables monitoring of γ-PGA production in depolymerase knockout mutants of Bacillus subtilis with the phosphate-starvation inducible promoter Ppst.

Poly-γ-glutamic acid (γ-PGA) is a biopolymer with a wide range of applications, mainly produced using Bacillus strains. The formation and concomitant secretion of γ-PGA increases the culture broth viscosity, while enzymatic depolymerisation and degradation of γ-PGA decreases the culture broth viscosity. In this study, the recently published ViMOS (Viscosity Monitoring Online System) is applied for optical online measurements of broth viscosity in eight parallel shake flasks. It is shown that the ViMOS is suitable to monitor γ-PGA production and degradation online in shake flasks. This online monitoring enables the detailed analysis of the Ppst promoter and γ-PGA depolymerase knockout mutants in genetically modified Bacillus subtilis 168. The Ppst promoter becomes active under phosphate starvation. The different single depolymerase knockout mutants are ∆ggt, ∆pgdS, ∆cwlO and a triple knockout mutant. An increase in γ-PGA yield in gγ-PGA /gglucose of 190% could be achieved with the triple knockout mutant compared to the Ppst reference strain. The single cwlO knockout also increased γ-PGA production, while the other single knockouts of ggt and pgdS showed no impact. Partial depolymerisation of γ-PGA occurred despite the triple knockout. The online measured data are confirmed with offline measurements. The online viscosity system directly reflects γ-PGA synthesis, γ-PGA depolymerisation, and changes in the molecular weight. Thus, the ViMOS has great potential to rapidly gain detailed and reliable information about new strains and cultivation conditions. The broadened knowledge will facilitate the further optimization of γ-PGA production.

Comparison of Isomerase and Weimberg Pathway for γ-PGA Production From Xylose by Engineered Bacillus subtilis.

The production of poly-γ-glutamic acid (γ-PGA), a biopolymer consisting of D- and L-glutamic acid monomers, currently relies on L-glutamate, or citrate as carbon substrates. Here we aimed at using plant biomass-derived substrates such as xylose. γ-PGA producing microorganisms including Bacillus subtilis natively metabolize xylose via the isomerase pathway. The Weimberg pathway, a xylose utilization pathway first described for Caulobacter crescentus, offers a carbon-efficient alternative converting xylose to 2-oxoglutarate without carbon loss. We engineered a recombinant B. subtilis strain that was able to grow on xylose with a growth rate of 0.43 h-1 using a recombinant Weimberg pathway. Although ion-pair reversed-phase LC/MS/MS metabolome analysis revealed lower concentrations of γ-PGA precursors such as 2-oxoglutarate, the γ-PGA titer was increased 6-fold compared to the native xylose isomerase strain. Further metabolome analysis indicates a metabolic bottleneck in the phosphoenolpyruvate-pyruvate-oxaloacetate node causing bi-phasic (diauxic) growth of the recombinant Weimberg strain. Flux balance analysis (FBA) of the γ-PGA producing B. subtilis indicated that a maximal theoretical γ-PGA yield is achieved on D-xylose/ D-glucose mixtures. The results of the B. subtilis strain harboring the Weimberg pathway on such D-xylose/ D-glucose mixtures demonstrate indeed resource efficient, high yield γ-PGA production from biomass-derived substrates.

Probing unnatural amino acid integration into enhanced green fluorescent protein by genetic code expansion with a high-throughput screening platform.

BACKGROUND: Genetic code expansion has developed into an elegant tool to incorporate unnatural amino acids (uAA) at predefined sites in the protein backbone in response to an amber codon. However, recombinant production and yield of uAA comprising proteins are challenged due to the additional translation machinery required for uAA incorporation. RESULTS: We developed a microtiter plate-based high-throughput monitoring system (HTMS) to study and optimize uAA integration in the model protein enhanced green fluorescence protein (eGFP). Two uAA, propargyl-L-lysine (Plk) and (S)-2-amino-6-((2-azidoethoxy) carbonylamino) hexanoic acid (Alk), were incorporated at the same site into eGFP co-expressing the native PylRS/tRNAPylCUA pair originating from Methanosarcina barkeri in E. coli. The site-specific uAA functionalization was confirmed by LC-MS/MS analysis. uAA-eGFP production and biomass growth in parallelized E. coli cultivations was correlated to (i) uAA concentration and the (ii) time of uAA addition to the expression medium as well as to induction parameters including the (iii) time and (iv) amount of IPTG supplementation. The online measurements of the HTMS were consolidated by end point-detection using standard enzyme-linked immunosorbent procedures. CONCLUSION: The developed HTMS is powerful tool for parallelized and rapid screening. In light of uAA integration, future applications may include parallelized screening of different PylRS/tRNAPylCUA pairs as well as further optimization of culture conditions.

Light-induced gene expression with photocaged IPTG for induction profiling in a high-throughput screening system.

BACKGROUND: Inducible expression systems are frequently used for the production of heterologous proteins. Achieving maximum product concentrations requires induction profiling, namely the optimization of induction time and inducer concentration. However, the respective experiments can be very laborious and time-consuming. In this work, a new approach for induction profiling is presented where induction in a microtiter plate based cultivation system (BioLector) is achieved by light using photocaged isopropyl ß-D-1-thiogalactopyranoside (cIPTG). RESULTS: A flavin mononucleotide-based fluorescent reporter protein (FbFP) was expressed using a T7-RNA-polymerase dependent E. coli expression system which required IPTG as inducer. High power UV-A irradiation was directed into a microtiter plate by light-emitting diodes placed above each well of a 48-well plate. Upon UV irradiation, IPTG is released (uncaged) and induces product formation. IPTG uncaging, formation of the fluorescent reporter protein and biomass growth were monitored simultaneously in up to four 48-well microtiter plates in parallel with an in-house constructed BioLector screening system. The amount of released IPTG can be gradually and individually controlled for each well by duration of UV-A exposure, irradiance and concentration of photocaged IPTG added at the start of the cultivation. A comparison of experiments with either optical or conventional IPTG induction shows that product formation and growth are equivalent. Detailed induction profiles revealed that for the strain and conditions used maximum product formation is reached for very early induction times and with just 6-8 s of UV-A irradiation or 60-80 µM IPTG. CONCLUSIONS: Optical induction and online monitoring were successfully combined in a high-throughput screening system and the effect of optical induction with photocaged IPTG was shown to be equivalent to conventional induction with IPTG. In contrast to conventional induction, optical induction is less costly to parallelize, easy to automate, non-invasive and without risk of contamination. Therefore, light-induced gene expression with photocaged IPTG is a highly advantageous method for the efficient optimization of heterologous protein production and has the potential to replace conventional induction with IPTG.