The impact of synthetic amorphous silica (E 551) on differentiated Caco-2 cells, a model for the human intestinal epithelium.

For several decades, food-grade synthetic amorphous silica (SAS) have been used as a technological additive to reduce caking of food powders. Human exposure is thus inevitable and safety concerns are taken seriously. The toxicity of silica in general and SAS in particular has been studied extensively. Overall, there is little evidence that food-grade SAS pose any health risks to humans. However, from the available data it was often not clear which type of silica was used. Accordingly, the latest report of the European food safety authority requested additional toxicity data for well-characterised "real food-grade SAS". To close this gap, we screened a panel of ten well-defined, food-grade SAS for potential adverse effects on differentiated Caco-2 cells. Precipitated and fumed SAS with low, intermediate and high specific surface area were included to determine structure-activity relationships. In a physiological dose-range up to 50 µg/ml and 48 h of incubation, none of the materials induced adverse effects on differentiated Caco-2 cells. This held true for endpoints of acute cytotoxicity as well as epithelial specific measures of barrier integrity. These results showed that despite considerable differences in production routes and material characteristics, food-relevant SAS did not elicit acute toxicity responses in intestinal epithelial cells.

Factors influencing safety and efficacy of intravenous iron-carbohydrate nanomedicines: From production to clinical practice.

Iron deficiency is an important subclinical disease affecting over one billion people worldwide. A growing body of clinical records supports the use of intravenous iron-carbohydrate complexes for patients where iron replenishment is necessary and oral iron supplements are either ineffective or cannot be tolerated by the gastrointestinal tract. A critical characteristic of iron-carbohydrate drugs is the complexity of their core-shell structure, which has led to differences in the efficacy and safety of various iron formulations. This review describes parameters influencing the safety and effectiveness of iron-carbohydrate complexes during production, storage, handling, and clinical application. We summarized the physicochemical and biological assessments of commercially available iron carbohydrate nanomedicines to provide an overview of publicly available data. Further, we reviewed studies that described how subtle differences in the manufacturing process of iron-carbohydrate complexes can impact on the physicochemical, biological, and clinical outcomes of original product versus their intended copies or so-called iron "similar" products.

Beyond Unpredictability: The Importance of Reproducibility in Understanding the Protein Corona of Nanoparticles.

While it is well established that the surface of a nanoparticle plays a pivotal role for the protein corona, the vast number of proteins present in biological media render general conclusions about affinities between nanoparticle surfaces and proteins nontrivial. Recently published articles increasingly reveal differences between systems and an ever increasing number of influencing factors for the protein corona. In contrast, the present study posits that the reported differences may, at least in part, be due to poor experimental design, which leads to biased results. The present study investigates protein adsorption onto silica nanoparticles with different chemical groups on the surface by the statistical analysis of triplicate measurements as well as control measurements. We demonstrate that 60% of the identified protein types did not have any significant affinities for the nanoparticles. Of the remaining 40%, 60% were driven by surface charges and only 40% preferentially adsorbed onto specific surface groups. Furthermore, we found that of the 20 most abundant proteins in the serum, only five bound to the nanoparticles studied here. We illustrate the importance of control replicate experiments to avoid exaggerated differences between systems and to properly quantify the differences and similarities between comparable systems.

Nanocomposites comprised of homogeneously dispersed magnetic iron-oxide nanoparticles and poly(methyl methacrylate).

Nanocomposites with a high, uniform loading of magnetic nanoparticles are very desirable for applications such as electromagnetic shielding and cancer treatment based on magnetically induced hyperthermia. In this study, a simple and scalable route for preparing nanocomposites with a high, uniform loading of magnetic nanoparticles is presented. The magnetic iron-oxide nanoparticles were functionalized with a methacrylate-based monomer that copolymerized in a toluene solution with the methyl methacrylate (MMA) monomer. The resulting suspension of magnetic nanoparticles decorated with poly(methyl methacrylate) (PMMA) chains in toluene were colloidal, even in the presence of a magnetic field gradient. Nanocomposites were precipitated from these suspensions. The transmission electron microscopy investigation of the prepared nanocomposites revealed that the magnetic nanoparticles were homogeneously dispersed in the PMMA matrix, even in amounts up to 53 wt %. The uniform dispersion of the nanoparticles in the PMMA matrix was attributed to the good solvation of the grafted PMMA chains from the magnetic nanoparticles by the PMMA chains of the matrix. The nanocomposites were superparamagnetic and exhibited large values for the saturation magnetization of up to 36 emu/g. Moreover, the nanocomposite with the largest amount of incorporated nanoparticles exhibited relatively large values for the specific power loss when subjected to alternating magnetic fields, giving this material great potential for the magnetically induced hyperthermia-based treatment of cancer.

Hexosomes with Undecylenic Acid Efficient against Candida albicans.

Due to the growing issues with fungal infections, especially with Candida, there is still a need to develop novel anti-Candida materials. One of the known antifungal agents is undecylenic acid (UA), which still cannot be efficiently used due to its oily nature, and thus limited solubility. By taking advantage of the properties of UA, we developed an emulsion with hexagonal phase, i.e., hexosomes, whose structure and morphology was studied by small-angle X-ray scattering and cryo-electron microscopy, respectively. The presence of UA in the hexosome was confirmed by spectroscopy. Moreover, we studied the anti-Candida effect of hexosomes and their cytotoxicity toward human cells. The minimal inhibitory concentration for the 50% and 90% Candida-growth reduction was found at 0.01 and 0.16 wt % hexosomes, respectively (i.e., 2 and 32 pghex/C.a.cell, respectively). The percentage of metabolically active Candida was reduced by 72-96% at hexosome concentrations of 1.0-8.2 pghex/C.a.cell as compared to untreated Candida. Furthermore, at the same concentration range the embedded filamentation test after 24 and 48 h showed the inhibition of both the filamentation and growth of Candida, while the preliminary toxicity test showed that hexosomes were nontoxic for human cells. All these render the here-developed hexosomes with UA efficient and promising anti-Candida agents.

Fungicidal PMMA-Undecylenic Acid Composites.

Undecylenic acid (UA), known as antifungal agent, still cannot be used to efficiently modify commercial dental materials in such a way that this affects Candida. Actually, issues with Candida infections and fungal resistance compromise the use of Poly(methyl-methacrylate) (PMMA) as dental material. The challenge remains to turn PMMA into an antifugal material, which can ideally affect both sessile (attached) and planktonic (free-floating) Candida cells. We aimed to tackle this challenge by designing PMMA-UA composites with different UA concentrations (3-12%). We studied their physico-chemical properties, the antifungal effect on Candida and the cytotoxicity toward human cells. We found that UA changes the PMMA surface into a more hydrophilic one. Mainly, as-preparation composites with ≥6% UA reduced sessile Candida for >90%. After six days, the composites were still efficiently reducing the sessile Candida cells (for ~70% for composites with ≥6% UA). Similar results were recorded for planktonic Candida. Moreover, the inhibition zone increased along with the UA concentration. The antifungal effect of UA was also examined at the surface of an UA-loaded agar and the minimal inhibitory concentration (MIC90) was below the lowest-studied 0.0125% UA. Furthermore, the embedded filamentation test after 24 h and 48 h showed complete inhibition of the Candida growth at 0.4% UA.

Folic acid on iron oxide nanoparticles: platform with high potential for simultaneous targeting, MRI detection and hyperthermia treatment of lymph node metastases of prostate cancer.

The overexpression of the folate receptor in most cancers has been widely exploited to specifically deliver folic acid (FA) coupled nanomedicines to tumors. However, complex coupling chemistry is often used to bind FA to the nanoparticles. Furthermore, very little has been reported for the targeting of nanomedicines to lymph node metastases (LNMs) of prostate cancer. We here report the simple and aqueous coating of iron oxide nanoparticles (IONPs) with FA for theranostics of LNMs of prostate cancer. FA was directly bound to the IONPs' surface without the use of any linker, simultaneously playing the role of the coating molecule and targeting agent. We measured for FA-IONPs a hydrodynamic diameter around 100 nm and a negative surface charge, what is needed to access and to be retained in the lymphatic system for the LNMs targeting. We also show that FA-IONPs are specifically uptaken by prostate cancer cells expressing the prostate specific membrane antigen, including LNMs cells. FA-IONPs also displayed both high relaxivity for MRI detection and high specific absorption rate needed for hyperthermia treatment of tumors. Our study provides a theranostic platform for targeting LNMs of prostate cancer with high potential for their detection by MRI and treatment by hyperthermia.

Tuning Properties of Iron Oxide Nanoparticles in Aqueous Synthesis without Ligands to Improve MRI Relaxivity and SAR.

Aqueous synthesis without ligands of iron oxide nanoparticles (IONPs) with exceptional properties still remains an open issue, because of the challenge to control simultaneously numerous properties of the IONPs in these rigorous settings. To solve this, it is necessary to correlate the synthesis process with their properties, but this correlation is until now not well understood. Here, we study and correlate the structure, crystallinity, morphology, as well as magnetic, relaxometric and heating properties of IONPs obtained for different durations of the hydrothermal treatment that correspond to the different growth stages of IONPs upon initial co-precipitation in aqueous environment without ligands. We find that their properties were different for IONPs with comparable diameters. Specifically, by controlling the growth of IONPs from primary to secondary particles firstly by colloidal and then also by magnetic interactions, we control their crystallinity from monocrystalline to polycrystalline IONPs, respectively. Surface energy minimization in the aqueous environment along with low temperature treatment is used to favor nearly defect-free IONPs featuring superior properties, such as high saturation magnetization, magnetic volume, surface crystallinity, the transversal magnetic resonance imaging (MRI) relaxivity (up to r2 = 1189 mM-1·s-1 and r2/r1 = 195) and specific absorption rate, SAR (up to 1225.1 W·gFe-1).

Versatility of Pyridoxal Phosphate as a Coating of Iron Oxide Nanoparticles.

Pyridoxal 5'-phosphate (PLP) is the most important cofactor of vitamin B6-dependent enzymes, which catalyses a wide range of essential body functions (e.g., metabolism) that could be exploited to specifically target highly metabolic cells, such as tumour metastatic cells. However, the use of PLP as a simultaneous coating and targeting molecule, which at once provides colloidal stability and specific biological effects has not been exploited so far. Therefore, in this work iron oxide nanoparticles (IONPs) were coated by PLP at two different pH values to tune PLP bonding (e.g., orientation) at the IONP surface. The surface study, as well as calculations, confirmed different PLP bonding to the IONP surface at these two pH values. Moreover, the obtained PLP-IONPs showed different zeta potential, hydrodynamic radius and agglomeration state, and consequently different uptake by two metastatic-prostate-cancer cell lines (LnCaP and PC3). In LnCaP cells, PLP modified the morphology of IONP-containing intracellular vesicles, while in PC3 cells PLP impacted the amount of IONPs taken up by cells. Moreover, PLP-IONPs displayed high magnetic resonance imaging (MRI) r2 relaxivity and were not toxic for the two studied cell lines, rendering PLP promising for biomedical applications. We here report the use of PLP simultaneously as a coating and targeting molecule, directly bound to the IONP surface, with the additional high potential for MRI detection.

Methods of protein corona isolation for magnetic nanoparticles.

Nanoparticles (NPs) in contact with a biological environment get covered by proteins and some are loosely bound and some are tightly bound. The latter form a hard protein corona (HPC) which is known to determine their biological behavior. Therefore, in order to study the biological behaviour of NPs one needs to start from the HPC. However, established methods and standards of HPC isolation are still not known. This is especially a challenge in the case of magnetic NPs which form a major branch of nanomedicine. Therefore, we developed a novel HPC isolation method, a multi-step centrifugation method (MSCM), for single-domain magnetic NPs. The MSCM was applied to iron oxide NPs in interaction with human blood and lymph serum with different dilutions in triplicate. The analysis of the composition of the obtained HPCs showed the reproducibility of the MSCM. This new method was also compared with the existing magnetic separation method (MagSep) and a study of the obtained HPC allowed us to establish the validity limits of MagSep and MSCM on only superparamagnetic NPs and on any single-domain magnetic NPs, respectively. Surprisingly, the HPCs obtained by these two isolation methods were quite different, up to 50%, suggesting that only these proteins, which are found in the HPCs of both isolation methods, are in fact real HPCs.

Assessment of nanoparticles' safety: corrected absorbance-based toxicity test.

We developed a method to correct absorbance-based toxicity tests to remove the influence of the deposited dose of nanoparticles. As a model of absorbance-based toxicity tests, we chose the frequently used MTS test. The corrected cell viabilities obtained with the MTS test matched the results of the fluorescence-based PrestoBlue® test.

Protein Corona: Impact of Lymph Versus Blood in a Complex In Vitro Environment.

In biological environments, the surface of nanoparticles (NPs) are modified by protein corona (PC) that determines their biological behavior. Unfortunately, in vitro tests still give different PC than in vivo tests causing in vitro-in vivo discrepancy; hence, in vitro studies are not indicative for the NPs' behavior in vivo. Here is demonstrated that PC in vitro is strongly influenced by the type of extracellular fluid (ECF), blood or lymph, by their high and low flow conditions and transitions between ECFs, and a combination of these parameters. As a result, this in vitro study approaches fluidic and dynamic variations to which NPs are exposed in vivo: different ECF that NPs encounter first in different injection routes, different transitions in-between ECFs during circulation, and simultaneous change in the exposed flow in these transitions. The most-abundant proteins in PCs are found to be not the most abundant in ECFs, but those having high affinity for binding to the surface of NPs. Moreover, some proteins are differently abundant in PCs at different flows, which indicate force-promoted binding, catch bonds. These results suggest that future in vitro studies should consider more complex incubation conditions to improve the in vitro-in vivo consistency necessary for translational research.

Modification of the surface of superparamagnetic iron oxide nanoparticles to enable their safe application in humans.

Combined individually tailored methods for diagnosis and therapy (theragnostics) could be beneficial in destructive diseases, such as rheumatoid arthritis. Nanoparticles are promising candidates for theragnostics due to their excellent biocompatibility. Nanoparticle modifications, such as improved surface coating, are in development to meet various requirements, although safety concerns mean that modified nanoparticles require further review before their use in medical applications is permitted. We have previously demonstrated that iron oxide nanoparticles with amino-polyvinyl alcohol (a-PVA) adsorbed on their surfaces have the unwanted effect of increasing human immune cell cytokine secretion. We hypothesized that this immune response was caused by free-floating PVA. The aim of the present study was to prevent unwanted immune reactions by further surface modification of the a-PVA nanoparticles. After cross-linking of PVA to nanoparticles to produce PVA-grafted nanoparticles, and reduction of their zeta potential, the effects on cell viability and cytokine secretion were analyzed. PVA-grafted nanoparticles still stimulated elevated cytokine secretion from human immune cells; however, this was inhibited after reduction of the zeta potential. In conclusion, covalent cross-linking of PVA to nanoparticles and adjustment of the surface charge rendered them nontoxic to immune cells, nonimmunogenic, and potentially suitable for use as theragnostic agents.

Engineered nanomaterials: toward effective safety management in research laboratories.

BACKGROUND: It is still unknown which types of nanomaterials and associated doses represent an actual danger to humans and environment. Meanwhile, there is consensus on applying the precautionary principle to these novel materials until more information is available. To deal with the rapid evolution of research, including the fast turnover of collaborators, a user-friendly and easy-to-apply risk assessment tool offering adequate preventive and protective measures has to be provided. RESULTS: Based on new information concerning the hazards of engineered nanomaterials, we improved a previously developed risk assessment tool by following a simple scheme to gain in efficiency. In the first step, using a logical decision tree, one of the three hazard levels, from H1 to H3, is assigned to the nanomaterial. Using a combination of decision trees and matrices, the second step links the hazard with the emission and exposure potential to assign one of the three nanorisk levels (Nano 3 highest risk; Nano 1 lowest risk) to the activity. These operations are repeated at each process step, leading to the laboratory classification. The third step provides detailed preventive and protective measures for the determined level of nanorisk. CONCLUSIONS: We developed an adapted simple and intuitive method for nanomaterial risk management in research laboratories. It allows classifying the nanoactivities into three levels, additionally proposing concrete preventive and protective measures and associated actions. This method is a valuable tool for all the participants in nanomaterial safety. The users experience an essential learning opportunity and increase their safety awareness. Laboratory managers have a reliable tool to obtain an overview of the operations involving nanomaterials in their laboratories; this is essential, as they are responsible for the employee safety, but are sometimes unaware of the works performed. Bringing this risk to a three-band scale (like other types of risks such as biological, radiation, chemical, etc.) facilitates the management for occupational health and safety specialists. Institutes and school managers can obtain the necessary information to implement an adequate safety management system. Having an easy-to-use tool enables a dialog between all these partners, whose semantic and priorities in terms of safety are often different.

Effects of PVA-coated nanoparticles on human T helper cell activity.

Superparamagnetic iron oxide nanoparticles (SPION) are used as high-sensitive enhancer for magnetic resonance imaging, where they represent a promising tool for early diagnosis of destructive diseases such as rheumatoid arthritis (RA). Since we could demonstrate that professional phagocytes are activated by amino-polyvinyl-alcohol-coated-SPION (a-PVA-SPION), the study here focuses on the influence of a-PVA-SPION on human T cells activity. Therefore, primary human CD4+ T cells from RA patients and healthy subjects were treated with varying doses of a-PVA-SPION for 20h or 72h. T cells were then analyzed for apoptosis, cellular energy, expression of the activation marker CD25 and cell proliferation. Although, we observed that T cells from RA patients are more susceptible to low-dose a-PVA-SPION-induced apoptosis than T cells from healthy subjects, in both groups a-PVA-SPION do not activate CD4+ T cells per se and do not influence mitogen-mediated T cells activation with regard to CD25 expression and cell proliferation. Nevertheless, our results demonstrate that CD4+ T cells from RA patients and healthy subjects differ in their response to mitogen stimulation and oxygen availability. We conclude from our data, that a-PVA-SPION do neither activate nor significantly influence mitogen-stimulated CD4+ T cells activation and have negligible influence on T cells apoptosis.

Accumulation of amino-polyvinyl alcohol-coated superparamagnetic iron oxide nanoparticles in bone marrow: implications for local stromal cells.

AIMS: First, it will be investigated if amino-polyvinyl alcohol-coated superparamagnetic iron oxide nanoparticles (A-PVA-SPIONs) are suitable for MRI contrast enhancement in bone marrow. Second, the impact of A-PVA-SPION exposure in vivo on the viability and key functions of local bone marrow stromal cells (BMSCs) will be investigated. MATERIAL & METHODS: Animals were systemically injected with A-PVA-SPIONs, followed by a 7-day survival time. Accumulation of A-PVA-SPIONs was confirmed by MRI, histology and inductively coupled plasma optical emission spectrometry. BMSCs were isolated from bone marrow for in vitro assessment of their viability and regenerative key functions. RESULTS: In this study, A-PVA-SPIONs were found to accumulate in bone marrow and increase the BMSCs' metabolic activity and migration rate. CONCLUSION: A-PVA-SPIONs appear suitable for contrast enhancement in bone marrow while our data suggest an influence on the BMSCs biology that necessitates future research.

Significance of surface charge and shell material of superparamagnetic iron oxide nanoparticle (SPION) based core/shell nanoparticles on the composition of the protein corona.

As nanoparticles (NPs) are increasingly used in many applications their safety and efficient applications in nanomedicine have become concerns. Protein coronas on nanomaterials' surfaces can influence how the cell "recognizes" nanoparticles, as well as the in vitro and in vivo NPs' behaviors. The SuperParamagnetic Iron Oxide Nanoparticle (SPION) is one of the most prominent agents because of its superparamagnetic properties, which is useful for separation applications. To mimic surface properties of different types of NPs, a core-shell SPION library was prepared by coating with different surfaces: polyvinyl alcohol polymer (PVA) (positive, neutral and negative), SiO2 (positive and negative), titanium dioxide and metal gold. The SPIONs with different surfaces were incubated at a fixed serum : nanoparticle surface ratio, magnetically trapped and washed. The tightly bound proteins were quantified and identified. The surface charge has a great impact on protein adsorption, especially on PVA and silica where proteins preferred binding to the neutral and positively charged surfaces. The importance of surface material on protein adsorption was also revealed by preferential binding on TiO2 and gold coated SPION, even negatively charged. There is no correlation between the protein net charge and the nanoparticle surface charge on protein binding, nor direct correlation between the serum proteins' concentration and the proteins detected in the coronas.

Effects of PVA coated nanoparticles on human immune cells.

Nanotechnology provides new opportunities in human medicine, mainly for diagnostic and therapeutic purposes. The autoimmune disease rheumatoid arthritis (RA) is often diagnosed after irreversible joint structural damage has occurred. There is an urgent need for a very early diagnosis of RA, which can be achieved by more sensitive imaging methods. Superparamagnetic iron oxide nanoparticles (SPION) are already used in medicine and therefore represent a promising tool for early diagnosis of RA. The focus of our work was to investigate any potentially negative effects resulting from the interactions of newly developed amino-functionalized amino-polyvinyl alcohol coated (a-PVA) SPION (a-PVA-SPION), that are used for imaging, with human immune cells. We analyzed the influence of a-PVA-SPION with regard to cell survival and cell activation in human whole blood in general, and in human monocytes and macrophages representative of professional phagocytes, using flow cytometry, multiplex suspension array, and transmission electron microscopy. We found no effect of a-PVA-SPION on the viability of human immune cells, but cytokine secretion was affected. We further demonstrated that the percentage of viable macrophages increased on exposure to a-PVA-SPION. This effect was even stronger when a-PVA-SPION were added very early in the differentiation process. Additionally, transmission electron microscopy analysis revealed that both monocytes and macrophages are able to endocytose a-PVA-SPION. Our findings demonstrate an interaction between human immune cells and a-PVA-SPION which needs to be taken into account when considering the use of a-PVA-SPION in human medicine.

Nanoparticles in medicine: Current challenges facing inorganic nanoparticle toxicity assessments and standardizations.

Although nanoparticles research is ongoing since more than 30years, the development of methods and standard protocols required for their safety and efficacy testing for human use is still in development. The review covers questions on toxicity, safety, risk and legal issues over the lifecycle of inorganic nanoparticles for medical applications. The following topics were covered: (i) In vitro tests may give only a very first indication of possible toxicity as in the actual methods interactions at systemic level are mainly neglected; (ii) the science-driven and the regulation-driven approaches do not really fit for decisive strategies whether or not a nanoparticle should be further developed and may receive a kind of "safety label". (iii) Cost and time of development are the limiting factors for the drug pipeline. Knowing which property of a nanoparticle makes it toxic it may be feasible to re-engineer the particle for higher safety (safety by design). FROM THE CLINICAL EDITOR: Testing the safety and efficacy of nanoparticles for human use is still in need of standardization. In this concise review, the author described and discussed the current unresolved issues over the application of inorganic nanoparticles for medical applications.