Safety of Early Discharge After Coronary Artery Bypass Grafting: A Nationwide Readmissions Analysis.

BACKGROUND: We determined the safety of early discharge after coronary artery bypass grafting (CABG) in patients with uncomplicated postoperative courses and compared outcomes to routine discharge in a national cohort. We identified preoperative factors associated with readmission following early discharge after CABG. METHODS: The Nationwide Readmissions Database was queried to identify patients undergoing CABG from 01/2016-12/2018. Patients were stratified based on length of stay (LOS) as early (≤4 days) versus routine (5-10 days) discharge. Patients were excluded with hospital courses indicative of complicated stays (emergent procedures, LOS>10 days, discharge to extended care facility or with home health, index-hospitalization mortality). Propensity-score matching was performed to compare outcomes between cohorts. Multivariable logistic regression models were used to identify factors associated with readmission following early discharge. RESULTS: A total of 91,861 patients underwent CABG with an uncomplicated postoperative course during the study period (≈20% of CABG population). Of these 31% (28,790/91,861) were discharged early and 69% (63,071/91,861) routine. After propensity-score matching, patients discharged early had lower readmission rates at 30-days, 90-days, and up to one year (P<.001, all). Index-hospitalization cost was lower with early discharge ($26,676 versus $32,859; P<.001). Early discharge was associated with a lower incidence of nosocomial infection at index-hospitalization (0.17% versus 0.81%, P<.001) and readmission from infection (14.5% versus 18%, P=.016). CONCLUSIONS: Early discharge after uncomplicated CABG can be considered in a highly selective patient population. Early discharge patients are readmitted less frequently than matched routine discharge patients, with a lower incidence of readmission from infection. Appropriate post-discharge processes to facilitate early discharge after CABG should be further pursued.

Outcomes after bioprosthetic versus mechanical mitral valve replacement for infective endocarditis in the United States.

Objective: In patients who underwent mitral valve replacement for infectious endocarditis, we evaluated the association of prosthesis choice with readmission rates and causes (the primary outcomes), as well as with in-hospital mortality, cost, and length of stay (the secondary outcomes). Methods: Patients with infectious endocarditis who underwent isolated mitral valve replacement from January 2016 to December 2018 were identified in the United States Nationwide Readmissions Database and stratified by valve type. Propensity score matching was used to compare adjusted outcomes. Results: A weighted total of 4206 patients with infectious endocarditis underwent bioprosthetic mitral valve replacement (n = 3132) and mechanical mitral valve replacement (n = 1074) during the study period. Patients in the bioprosthetic mitral valve replacement group were older than those in the mechanical mitral valve replacement group (median 57 vs 46 y, P < .001). After propensity matching, the bioprosthetic mitral valve replacement group (n = 1068) had similar in-hospital mortality, length of stay, and costs compared with the mechanical mitral valve replacement group (n = 1056). Overall, 90-day readmission rates were high (28.9%) and comparable for bioprosthetic mitral valve replacement (30.5%) and mechanical mitral valve replacement (27.5%, P = .4). Likewise, there was no difference in readmissions over a calendar year by prosthesis type. Readmissions for infection and bleeding were common for both bioprosthetic mitral valve replacement and mechanical mitral valve replacement groups. Conclusions: Outcomes and readmission rates were similar for mechanical mitral valve replacement and bioprosthetic mitral valve replacement in infectious endocarditis, suggesting that valve choice should not be determined by endocarditis status. Additionally, strategies to mitigate readmission for infection and bleeding are needed for both groups.

Self-rectifying magnetoelectric metamaterials for remote neural stimulation and motor function restoration.

Magnetoelectric materials convert magnetic fields into electric fields. These materials are often used in wireless electronic and biomedical applications. For example, magnetoelectrics could enable the remote stimulation of neural tissue, but the optimal resonance frequencies are typically too high to stimulate neural activity. Here we describe a self-rectifying magnetoelectric metamaterial for a precisely timed neural stimulation. This metamaterial relies on nonlinear charge transport across semiconductor layers that allow the material to generate a steady bias voltage in the presence of an alternating magnetic field. We generate arbitrary pulse sequences with time-averaged voltage biases in excess of 2 V. As a result, we can use magnetoelectric nonlinear metamaterials to wirelessly stimulate peripheral nerves to restore a sensory reflex in an anaesthetized rat model and restore signal propagation in a severed nerve with latencies of less than 5 ms. Overall, these results showing the rational design of magnetoelectric metamaterials support applications in advanced biotechnology and electronics.

Development of photoreactive demineralized bone matrix 3D printing colloidal inks for bone tissue engineering.

Demineralized bone matrix (DBM) has been widely used clinically for dental, craniofacial and skeletal bone repair, as an osteoinductive and osteoconductive material. 3D printing (3DP) enables the creation of bone tissue engineering scaffolds with complex geometries and porosity. Photoreactive methacryloylated gelatin nanoparticles (GNP-MAs) 3DP inks have been developed, which display gel-like behavior for high print fidelity and are capable of post-printing photocrosslinking for control of scaffold swelling and degradation. Here, novel DBM nanoparticles (DBM-NPs, ∼400 nm) were fabricated and characterized prior to incorporation in 3DP inks. The objectives of this study were to determine how these DBM-NPs would influence the printability of composite colloidal 3DP inks, assess the impact of ultraviolet (UV) crosslinking on 3DP scaffold swelling and degradation and evaluate the osteogenic potential of DBM-NP-containing composite colloidal scaffolds. The addition of methacryloylated DBM-NPs (DBM-NP-MAs) to composite colloidal inks (100:0, 95:5 and 75:25 GNP-MA:DBM-NP-MA) did not significantly impact the rheological properties associated with printability, such as viscosity and shear recovery or photocrosslinking. UV crosslinking with a UV dosage of 3 J/cm2 directly impacted the rate of 3DP scaffold swelling for all GNP-MA:DBM-NP-MA ratios with an ∼40% greater increase in scaffold area and pore area in uncrosslinked versus photocrosslinked scaffolds over 21 days in phosphate-buffered saline (PBS). Likewise, degradation (hydrolytic and enzymatic) over 21 days for all DBM-NP-MA content groups was significantly decreased, ∼45% less in PBS and collagenase-containing PBS, in UV-crosslinked versus uncrosslinked groups. The incorporation of DBM-NP-MAs into scaffolds decreased mass loss compared to GNP-MA-only scaffolds during collagenase degradation. An in vitro osteogenic study with bone marrow-derived mesenchymal stem cells demonstrated osteoconductive properties of 3DP scaffolds for the DBM-NP-MA contents examined. The creation of photoreactive DBM-NP-MAs and their application in 3DP provide a platform for the development of ECM-derived colloidal materials and tailored control of biochemical cue presentation with broad tissue engineering applications.

Extracellular matrix component-derived nanoparticles for drug delivery and tissue engineering.

The extracellular matrix (ECM) consists of a complex combination of proteins, proteoglycans, and other biomolecules. ECM-based materials have been demonstrated to have high biocompatibility and bioactivity, which may be harnessed for drug delivery and tissue engineering applications. Herein, nanoparticles incorporating ECM-based materials and their applications in drug delivery and tissue engineering are reviewed. Proteins such as gelatin, collagen, and fibrin as well as glycosaminoglycans including hyaluronic acid, chondroitin sulfate, and heparin have been employed for cancer therapeutic delivery, gene delivery, and wound healing and regenerative medicine. Strategies for modifying and functionalizing these materials with synthetic and natural polymers or to enable stimuli-responsive degradation and drug release have increased the efficacy of these materials and nano-systems. The incorporation and modification of ECM-based materials may be used to drive drug targeting and increase tissue-specific cell differentiation more effectively.

Repair of complex ovine segmental mandibulectomy utilizing customized tissue engineered bony flaps.

Craniofacial defects require a treatment approach that provides both robust tissues to withstand the forces of mastication and high geometric fidelity that allows restoration of facial architecture. When the surrounding soft tissue is compromised either through lack of quantity (insufficient soft tissue to enclose a graft) or quality (insufficient vascularity or inducible cells), a vascularized construct is needed for reconstruction. Tissue engineering using customized 3D printed bioreactors enables the generation of mechanically robust, vascularized bony tissues of the desired geometry. While this approach has been shown to be effective when utilized for reconstruction of non-load bearing ovine angular defects and partial segmental defects, the two-stage approach to mandibular reconstruction requires testing in a large, load-bearing defect. In this study, 5 sheep underwent bioreactor implantation and the creation of a load-bearing mandibular defect. Two bioreactor geometries were tested: a larger complex bioreactor with a central groove, and a smaller rectangular bioreactor that were filled with a mix of xenograft and autograft (initial bone volume/total volume BV/TV of 31.8 ± 1.6%). At transfer, the tissues generated within large and small bioreactors were composed of a mix of lamellar and woven bone and had BV/TV of 55.3 ± 2.6% and 59.2 ± 6.3%, respectively. After transfer of the large bioreactors to the mandibular defect, the bioreactor tissues continued to remodel, reaching a final BV/TV of 64.5 ± 6.2%. Despite recalcitrant infections, viable osteoblasts were seen within the transferred tissues to the mandibular site at the end of the study, suggesting that a vascularized customized bony flap is a potentially effective reconstructive strategy when combined with an optimal stabilization strategy and local antibiotic delivery prior to development of a deep-seated infection.

The effect of multi-material architecture on the ex vivo osteochondral integration of bioprinted constructs.

Extrusion bioprinted constructs for osteochondral tissue engineering were fabricated to study the effect of multi-material architecture on encapsulated human mesenchymal stem cells' tissue-specific matrix deposition and integration into an ex vivo porcine osteochondral explant model. Two extrusion fiber architecture groups with differing transition regions and degrees of bone- and cartilage-like bioink mixing were employed. The gradient fiber (G-Fib) architecture group showed an increase in chondral integration over time, 18.5 ± 0.7 kPa on Day 21 compared to 9.6 ± 1.6 kPa on Day 1 for the required peak push-out force, and the segmented fiber (S-Fib) architecture group did not, which corresponded to the increase in sulfated glycosaminoglycan deposition noted only in the G-Fib group and the staining for cellularity and tissue-specific matrix deposition at the fiber-defect boundary. Conversely, the S-Fib architecture was associated with significant mineralization over time, but the G-Fib architecture was not. Notably, both fiber groups also had similar chondral integration as a re-inserted osteochondral tissue control. While architecture did dictate differences in the cells' responses to their environment, architecture was not shown to distinguish a statistically significant difference in tissue integration via fiber push-out testing within a given time point or explant region. Use of this three-week osteochondral model demonstrates that these bioink formulations support the fabrication of cell-laden constructs that integrate into explanted tissue as capably as natural tissue and encapsulate osteochondral matrix-producing cells, and it also highlights the important role that spatial architecture plays in the engineering of multi-phasic tissue environments. STATEMENT OF SIGNIFICANCE: Here, an ex vivo model was used to interrogate fundamental questions about the effect of multi-material scaffold architectural choices on osteochondral tissue integration. Cell-encapsulating constructs resembling stratified osteochondral tissue were 3D printed with architecture consisting of either gradient transitions or segmented transitions between the bone-like and cartilage-like bioink regions. The printed constructs were assessed alongside re-inserted natural tissue plugs via mechanical tissue integration push-out testing, biochemical assays, and histology. Differences in osteochondral matrix deposition were observed based on architecture, and both printed groups demonstrated cartilage integration similar to the native tissue plug group. As 3D printing becomes commonplace within biomaterials and tissue engineering, this work illustrates critical 3D co-culture interactions and demonstrates the importance of considering architecture when interpreting the results of studies utilizing spatially complex, multi-material scaffolds.

Thermogelling hydrogel charge and lower critical solution temperature influence cellular infiltration and tissue integration in an ex vivo cartilage explant model.

Thermogelling hydrogels based on poly(N-isopropyl acrylamide) (p[NiPAAm]) and crosslinked with a peptide-bearing macromer poly(glycolic acid)-poly(ethylene glycol)-poly(glycolic acid)-di(but-2-yne-1,4-dithiol) (PdBT) were fabricated to assess the role of hydrogel charge and lower critical solution temperature (LCST) over time in influencing cellular infiltration and tissue integration in an ex vivo cartilage explant model over 21 days. The p(NiPAAm)-based thermogelling polymer was synthesized to possess 0, 5, and 10 mol% dimethyl-γ-butyrolactone acrylate (DBA) to raise the LCST over time as the lactone rings hydrolyzed. Further, three peptides were designed to impart charge into the hydrogels via conjugation to the PdBT crosslinker. The positively, neutrally, and negatively charged peptides K4 (+), zwitterionic K2E2 (0), and E4 (-), respectively, were conjugated to the modular PdBT crosslinker and the hydrogels were evaluated for their thermogelation behavior in vitro before injection into the cartilage explant models. Samples were collected at days 0 and 21, and tissue integration and cellular infiltration were assessed via mechanical pushout testing and histology. Negatively charged hydrogels whose LCST changed over time (10 mol% DBA) were demonstrated to promote the greatest tissue integration when compared to the positive and neutral gels of the same thermogelling polymer formulation due to increased transport and diffusion across the hydrogel-tissue interface. Indeed, the negatively charged thermogelling polymer groups containing 5 and 10 mol% DBA demonstrated cellular infiltration and cartilage-like matrix deposition via histology. This study demonstrates the important role that material physicochemical properties play in dictating cell and tissue behavior and can inform future cartilage tissue engineering strategies.

Socioeconomic disparities in procedural choice and outcomes after aortic valve replacement.

Objective: To identify potential socioeconomic disparities in the procedural choice of patients undergoing surgical aortic valve replacement (SAVR) versus transcatheter aortic valve replacement (TAVR) and in readmission outcomes after SAVR or TAVR. Methods: The Nationwide Readmissions Database was queried to identify a total of 243,691 patients who underwent isolated SAVR and TAVR between January 2016 and December 2018. Patients were stratified according to a tiered socioeconomic status (SES) metric comprising patient factors including education, literacy, housing, employment, insurance status, and neighborhood median income. Multivariable analyses were used to assess the effect of SES on procedural choice and risk-adjusted readmission outcomes. Results: SAVR (41.4%; 100,833 of 243,619) was performed less frequently than TAVR (58.6%; 142,786 of 243,619). Lower SES was more frequent among patients undergoing SAVR (20.2% [20,379 of 100,833] vs 19.4% [27,791 of 142,786]; P < .001). Along with such variables as small hospital size, drug abuse, arrhythmia, and obesity, lower SES was independently associated with SAVR relative to TAVR (adjusted odds ratio [aOR], 1.17; 95% confidence interval [CI], 1.11 to 1.24). After SAVR, but not after TAVR, lower SES was independently associated with increased readmission at 30 days (aOR, 1.19; 95% CI, 1.07-1.32), 90 days (aOR, 1.27; 95% CI, 1.15-1.41), and 1 year (adjusted hazard ratio, 1.19; 95% CI, 1.11 to 1.28; P < .05 for all). Conclusions: Our study findings indicate that socioeconomic disparities exist in the procedural choice for patients undergoing AVR. Patients with lower SES had increased odds of undergoing SAVR, as well as increased odds of readmission after SAVR, but not after TAVR, supporting that health inequities exist in the surgical care of socioeconomically disadvantaged patients.

Influence of concomitant ablation of nonparoxysmal atrial fibrillation during coronary artery bypass grafting on mortality and readmissions.

Objective: We determined the utilization rate of surgical ablation (SA) during coronary artery bypass grafting (CABG) and compared outcomes between CABG with or without SA in a national cohort. Methods: The January 2016 to December 2018 Nationwide Readmissions Database was searched for all patients undergoing isolated CABG with preoperative persistent or chronic atrial fibrillation by using the International Classification of Diseases, 10th Revision classification. Propensity score matching and multivariate logistic regressions were performed to compare outcomes, and Cox proportional hazards model was used to assess risk factors for 1-year readmission. Results: Of 18,899 patients undergoing CABG with nonparoxysmal atrial fibrillation, 78% (n = 14,776) underwent CABG alone and 22% (n = 4123) underwent CABG with SA. In the propensity score-matched cohort (n = 8116), CABG with SA (n = 4054) (vs CABG alone [n = 4112]) was not associated with increased in-hospital mortality (3.4% [139 out of 4112] vs 3.9% [159 ut of 4054]; P = .4), index-hospitalization length of stay (10 days vs 10 days; P = .3), 30-day readmission (19.1% [693 out of 3362] vs 17.2% [609 out of 3537]; P = .2), or 90-day readmission (28.9% [840 out of 2911] vs 26.2% [752 out of 2875]; P = .1). Index hospitalization costs were significantly higher for those undergoing SA ($52,556 vs $47,433; P < .001). Rates of readmission at 300 days were similar between patients receiving SA (43.8%) and no SA (42.8%; log-rank P = .3). The 3 most common causes of readmission were not different between groups and included heart failure (24.3% [594 out of 2444]; P = .6), infection (16.8% [411 out of 2444]; P = .5), and arrhythmia (11.7% [286 out of 2444]; P = .2). Conclusions: In patients with nonparoxysmal atrial fibrillation, utilization of SA during CABG remains low. SA during CABG did not adversely influence mortality or short-term readmissions. These findings support increased use of SA during CABG.

Human gelatin-based composite hydrogels for osteochondral tissue engineering and their adaptation into bioinks for extrusion, inkjet, and digital light processing bioprinting.

The investigation of novel hydrogel systems allows for the study of relationships between biomaterials, cells, and other factors within osteochondral tissue engineering. Three-dimensional (3D) printing is a popular research method that can allow for further interrogation of these questions via the fabrication of 3D hydrogel environments that mimic tissue-specific, complex architectures. However, the adaptation of promising hydrogel biomaterial systems into 3D-printable bioinks remains a challenge. Here, we delineated an approach to that process. First, we characterized a novel methacryloylated gelatin composite hydrogel system and assessed how calcium phosphate and glycosaminoglycan additives upregulated bone- and cartilage-like matrix deposition and certain genetic markers of differentiation within human mesenchymal stem cells (hMSCs), such as RUNX2 and SOX9. Then, new assays were developed and utilized to study the effects of xanthan gum and nanofibrillated cellulose, which allowed for cohesive fiber deposition, reliable droplet formation, and non-fracturing digital light processing (DLP)-printed constructs within extrusion, inkjet, and DLP techniques, respectively. Finally, these bioinks were used to 3D print constructs containing viable encapsulated hMSCs over a 7 d period, where DLP printed constructs facilitated the highest observed increase in cell number over 7 d (∼2.4×). The results presented here describe the promotion of osteochondral phenotypes via these novel composite hydrogel formulations, establish their ability to bioprint viable, cell-encapsulating constructs using three different 3D printing methods on multiple bioprinters, and document how a library of modular bioink additives affected those physicochemical properties important to printability.

Bioinspired electrospun decellularized extracellular matrix scaffolds promote muscle regeneration in a rat skeletal muscle defect model.

Volumetric muscle loss is a debilitating injury that can leave patients with long-lasting or permanent structural and functional deficits. With clinical treatments failing to address these shortcomings, there is a great need for tissue-engineered therapies to promote skeletal muscle regeneration. In this study, we aim to assess the potential for electrospun decellularized skeletal muscle extracellular matrix (dECM) to promote skeletal muscle regeneration in a rat partial thickness tibialis anterior defect model. Aligned electrospun scaffolds with varying degrees of crosslinking density were implanted into the defect site and compared to an empty defect control. After 8 weeks, muscles were harvested, weighed, and cellular and morphological analyses were performed via histology and immunohistochemistry. Cell infiltration, angiogenesis, and myogenesis were observed in the defect site in both dECM groups. However, favorable mechanical properties and slower degradation kinetics resulted in greater support of tissue remodeling in the more crosslinked scaffolds and preservation of existing myofiber area in both dECM groups compared to the empty defect control. More sustained release of pro-regenerative degradation products also promoted greater myofiber formation in the defect site. This study allowed for a greater understanding of how electrospun skeletal muscle scaffolds interact with existing skeletal muscle and can inform their potential as a therapy in a wide variety of soft tissue applications.

Strategies for recruiting, training, and retaining educators for adolescent pregnancy prevention programs: Insights from organization leaders and educators.

This paper provides insights into how 17 community-based organizations (CBOs) recruited, trained, and retained educators in pregnancy prevention program implementations for underserved adolescents in different areas of the United States. The paper also highlights problems and potential solutions associated with these practices. The study adopted a qualitative descriptive framework. We conducted 41 interviews with leaders and educators of CBOs and conducted qualitative content analysis of the interview data integrating deductive and inductive coding approaches. We found that a commonly emphasized recruitment and selection challenge was finding qualified candidates for short-term project-based employment. Interviewees highlighted limitations of curriculum training in preparing novice educators for program implementation and shared their strategies to overcome these limitations. Post-onboarding professional development opportunities were available for long-term educators, but not for short-term project-based educators. Educators reported receiving sufficient support from their organizations and coworkers to perform their jobs and maintain their well-being. Although none of the educators desired to leave their roles, they shared potential reasons for turnover, such as project-based employment and a desire to explore different career paths. We align the study findings with best practices proposed in the adolescent health education and human resources literatures and present a set of recommendations. Researchers interested in adolescent pregnancy prevention program implementation and organizations that plan to implement programs can benefit from the findings and recommendations presented in this article.

Contact Tracing Apps: Lessons Learned on Privacy, Autonomy, and the Need for Detailed and Thoughtful Implementation.

The global and national response to the COVID-19 pandemic has been inadequate due to a collective lack of preparation and a shortage of available tools for responding to a large-scale pandemic. By applying lessons learned to create better preventative methods and speedier interventions, the harm of a future pandemic may be dramatically reduced. One potential measure is the widespread use of contact tracing apps. While such apps were designed to combat the COVID-19 pandemic, the time scale in which these apps were deployed proved a significant barrier to efficacy. Many companies and governments sprinted to deploy contact tracing apps that were not properly vetted for performance, privacy, or security issues. The hasty development of incomplete contact tracing apps undermined public trust and negatively influenced perceptions of app efficacy. As a result, many of these apps had poor voluntary public uptake, which greatly decreased the apps' efficacy. Now, with lessons learned from this pandemic, groups can better design and test apps in preparation for the future. In this viewpoint, we outline common strategies employed for contact tracing apps, detail the successes and shortcomings of several prominent apps, and describe lessons learned that may be used to shape effective contact tracing apps for the present and future. Future app designers can keep these lessons in mind to create a version that is suitable for their local culture, especially with regard to local attitudes toward privacy-utility tradeoffs during public health crises.

Bioinspired electrospun dECM scaffolds guide cell growth and control the formation of myotubes.

While skeletal muscle has a high capacity for endogenous repair in acute injuries, volumetric muscle loss can leave long-lasting or permanent structural and functional deficits to the injured muscle and surrounding tissues. With clinical treatments failing to repair lost tissue, there is a great need for a tissue-engineered therapy to promote skeletal muscle regeneration. In this study, we aim to assess the potential for electrospun decellularized skeletal muscle extracellular matrix (dECM) with tunable physicochemical properties to control mouse myoblast growth and myotube formation. The material properties as well as cell behavior - growth and differentiation - were assessed in response to modulation of crosslinking and scaffold architecture. The fabrication of a bioactive dECM-based system with tunable physicochemical properties that can control myotube formation has several applications in skeletal muscle engineering and may bring the field one step closer to developing a therapy to address these unmet clinical needs.

Swelling Behaviors of 3D Printed Hydrogel and Hydrogel-Microcarrier Composite Scaffolds.

The present study sought to demonstrate the swelling behavior of hydrogel-microcarrier composite constructs to inform their use in controlled release and tissue engineering applications. In this study, gelatin methacrylate (GelMA) and GelMA-gelatin microparticle (GMP) composite constructs were three-dimensionally printed, and their swelling and degradation behavior was evaluated over time and as a function of the degree of crosslinking of included GMPs. GelMA-only constructs and composite constructs loaded with GMPs crosslinked with 10 mM (GMP-10) or 40 mM (GMP-40) glutaraldehyde were swollen in phosphate-buffered saline for up to 28 days to evaluate changes in swelling and polymer loss. In addition, scaffold reswelling capacity was evaluated under five successive drying-rehydration cycles. All printed materials demonstrated shear thinning behavior, with microparticle additives significantly increasing viscosity relative to the GelMA-only solution. Swelling results demonstrated that for GelMA/GMP-10 and GelMA/GMP-40 scaffolds, fold and volumetric swelling were statistically higher and lower, respectively, than for GelMA-only scaffolds after 28 days, and the volumetric swelling of GelMA and GelMA/GMP-40 scaffolds decreased over time. After 5 drying-rehydration cycles, GelMA scaffolds demonstrated higher fold swelling than both GMP groups while also showing lower volumetric swelling than GMP groups. Although statistical differences were not observed in the swelling of GMP-10 and GMP-40 particles alone, the interaction of GelMA/GMP demonstrated a significant effect on the swelling behaviors of composite scaffolds. These results demonstrate an example hydrogel-microcarrier composite system's swelling behavior and can inform the future use of such a composite system for controlled delivery of bioactive molecules in vitro and in vivo in tissue engineering applications. Impact statement In this study, porous three-dimensional printed (3DP) hydrogel constructs with and without natural polymer microcarriers were fabricated to observe swelling and degradation behavior under continuous swelling and drying-rehydration cycle conditions. Inclusion of microcarriers with different crosslinking densities led to distinct swelling behaviors for each biomaterial ink tested. 3DP hydrogel and hydrogel-microcarrier composite scaffolds have been commonly used in tissue engineering for the delivery of biomolecules. This study demonstrates the swelling behavior of porous hydrogel and hydrogel-microcarrier scaffolds that may inform later use of such materials for controlled release applications in a variety of fields including materials development and tissue regeneration.

Nanomaterial Additives for Fabrication of Stimuli-Responsive Skeletal Muscle Tissue Engineering Constructs.

Volumetric muscle loss necessitates novel tissue engineering strategies for skeletal muscle repair, which have traditionally involved cells and extracellular matrix-mimicking scaffolds and have thus far been unable to successfully restore physiologically relevant function. However, the incorporation of various nanomaterial additives with unique physicochemical properties into scaffolds has recently been explored as a means of fabricating constructs that are responsive to electrical, magnetic, and photothermal stimulation. Herein, several classes of nanomaterials that are used to mediate external stimulation to tissue engineered skeletal muscle are reviewed and the impact of these stimuli-responsive biomaterials on cell growth and differentiation and in vivo muscle repair is discussed. The degradation kinetics and biocompatibilities of these nanomaterial additives are also briefly examined and their potential for incorporation into clinically translatable skeletal muscle tissue engineering strategies is considered. Overall, these nanomaterial additives have proven efficacious and incorporation in tissue engineering scaffolds has resulted in enhanced functional skeletal muscle regeneration.

Localized mandibular infection affects remote in vivo bioreactor bone generation.

Mandibular reconstruction requires functional and aesthetic repair and is further complicated by contamination from oral and skin flora. Antibiotic-releasing porous space maintainers have been developed for the local release of vancomycin and to promote soft tissue attachment. In this study, mandibular defects in six sheep were inoculated with 106 colony forming units of Staphylococcus aureus; three sheep were implanted with unloaded porous space maintainers and three sheep were implanted with vancomycin-loaded space maintainers within the defect site. During the same surgery, 3D-printed in vivo bioreactors containing autograft or xenograft were implanted adjacent to rib periosteum. After 9 weeks, animals were euthanized, and tissues were analyzed. Antibiotic-loaded space maintainers were able to prevent dehiscence of soft tissue overlying the space maintainer, reduce local inflammatory cells, eliminate the persistence of pathogens, and prevent the increase in mandibular size compared to unloaded space maintainers in this sheep model. Animals with an untreated mandibular infection formed bony tissues with greater density and maturity within the distal bioreactors. Additionally, tissues grown in autograft-filled bioreactors had higher compressive moduli and higher maximum screw pull-out forces than xenograft-filled bioreactors. In summary, we demonstrated that antibiotic-releasing space maintainers are an innovative approach to preserve a robust soft tissue pocket while clearing infection, and that local infections can increase local and remote bone growth.

Fabrication and characterization of cell sheets using methylcellulose and PNIPAAm thermoresponsive polymers: A comparison Study.

Culturing cells on thermoresponsive polymers enables cells to be harvested as an intact cell sheet without disrupting the extracellular matrix or compromising cell-cell junctions. Previously, cell sheet fabrication methods using methylcellulose (MC) gel and PNIPAAm were independently demonstrated. In this study, MC and PNIPAAm fabrication methods are detailed and the resulting cell sheets characterized in parallel studies for direct comparison of human adipose derived stromal/stem cell (hASCs) sheet formation, cell morphology, viability, proliferation, and osteogenic potential over 21 days. A cell viability study revealed that hASCs in MC and PNIPAAm cell sheets remained viable for 21 days and proliferated until confluency. Osteogenic cell sheets exhibited upregulation of alkaline phosphatase (ALP) at day 7, as well as calcium deposition at 21 days. Additionally, expression of osteocalcin (OCN), a late-stage marker of osteogenesis, was quantified at days 14 and 21 using RT-PCR. OCN was upregulated in MC cell sheets at day 14 and PNIPAAm cell sheets at days 14 and 21. These results indicate that hASCs formed into cell sheets commit to an osteogenic lineage when cultured in osteogenic conditions. Cell sheets composed of hASCs may be used for further studies of hASC differentiation or surgical delivery of undifferentiated cells to defect sites. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 1346-1354, 2017.

In vitro characterization of polyesters of aconitic acid, glycerol, and cinnamic acid for bone tissue engineering.

In this study, a novel class of polyesters of glycerol, aconitic acid, and cinnamic acid were synthesized along with their hydroxyapatite (HA) composites, and studied for their potential application in bone defect repair. An osteogenic study was conducted with human adipose derived mesenchymal stem cells (hASCs) to determine the osteoinductive ability of aconitic acid-glycerol (AG) polyesters, AG:HA (80:20), aconitic acid-glycerol-cinnamic acid (AGC) polyesters, and AGC:HA (80:20) to serve as bone scaffolds. The results indicate that AGC scaffolds have the highest mechanical strength in comparison to AG, AG:HA (80:20), and AGC:HA (80:20) scaffolds due to its low porosity. It was determined by cytotoxicity and osteogenesis experiments that hASCs cultured for 21 days on AG:HA (80:20) scaffolds in stromal medium exhibited a greater number of live cells than control PCL:HA composites. Moreover, hASCs cultured on foamed AG:HA (80:20) scaffolds resulted in the highest levels of mineralization, increased alkaline phosphatase (ALP) expression, and the greatest osteocalcin (OCN) expression after 21 days. Overall, AG:HA (100:0 and 80:20) scaffolds had higher mechanical strength and cytocompatibility than the PCL:HA control. In vitro osteogenic study demonstrated that AG:HA (100:0 and 80:20) synthesized using sugarcane industry by-products hold potential as scaffolds for bone tissue engineering applications.