The A245K mutation exposes another stage of the bacterial L-lactate dehydrogenase reaction mechanism.

The A245K mutant of Bacillus stearothermophilus L-lactate dehydrogenase has been expressed in Escherichia coli and purified. A qualitative change in the reaction mechanism prior to the hydride transfer step in the reverse direction in the mutant is revealed. Both transient and steady state characteristics of the mutant are presented and show in contrast to the wild-type enzyme where a rearrangement of an enzyme-NADH-pyruvate complex is rate-limiting that in the mutant the rearrangement is much faster and hydride transfer is the first slow step. The steady state is limited by a new second slower conformation change involving an NAD+ complex. The mutation may provide a valuable framework for inhibitor and drug design research.

Production of an activated form of Bacillus stearothermophilus L-2-hydroxyacid dehydrogenase by directed evolution.

Bacillus stearothermophillus lactate dehydrogenase (bsLDH) is activated in the presence of fructose 1,6 bisphosphate (FBP). The activator is expensive and representative of the sort of co-factor complications that are undesirable in industrial processes. Three rounds of random mutagenesis and screening produced a mutant (6A) which is almost fully activated in the absence of FBP. Wild-type bsLDH has a K(pyr)(M) of 5 mM in the absence of FBP but when activated (+FBP) the K(pyr)(M) drops to 0.05 mM. The mutant 6A has a K(pyr)(M) of 0.07 mM in the absence of FBP. 6A has three amino acid substitutions-R118C, Q203L and N307S-resulting in a 70-fold activation, none of the mutations are near the active site. The activation of wild type bsLDH is due to an FBP induced tetramerization of dimeric bsLDH bringing about a structural rearrangement of key active site residues. The most likely explanation for the activation of 6A is derived from the position of Q203L, which is at the dimer-dimer interface. The suggestion is that the hydrophilic to hydrophobic change has altered the dimer-tetramer equilibrium position towards that of the tetramer. What is significant is the activation of bsLDH by a subtle long range event produced by the 'blind' directed evolution approach.

A general method for relieving substrate inhibition in lactate dehydrogenases.

The mutation S163L in human heart lactate dehydrogenase removes substrate inhibition while only modestly reducing the turnover rate for pyruvate. Since this is the third enzyme to show this behaviour, we suggest that the S163L mutation is a general method for the removal of substrate inhibition in L-LDH enzymes. Engineering such enzymatic properties has clear industrial applications in the use of these enzymes to produce enantiomerically pure alpha-hydroxy acids. The mutation leads to two principal effects. (1) Substrate inhibition is caused by the formation of a covalent adduct between pyruvate and the oxidized form of the cofactor. The inability of S163L mutants to catalyse the formation of this inhibitory adduct is demonstrated. However, NMR experiments show that the orientation of the nicotinamide ring in the mutant NAD+ binary complex is not perturbed. (2) The mutation also leads to a large increase in the KM for pyruvate. The kinetic and binding properties of S163L LDH mutants are accounted for by a mechanism which invokes a non-productive, bound form of the cofactor. Molecular modelling suggests a structure for this non-productive enzyme-NADH complex.

A general method of domain closure is applied to phosphoglycerate kinase and the result compared with the crystal structure of a closed conformation of the enzyme.

The occurrence of large domain motions associated with the mechanism of action of many proteins is well established. We present a general method of predicting domain closure applicable to proteins containing domains separated by an apparent hinge. The method attempts to allow for natural directional bias within the closing protein by repeatedly applying a weak pulling force over a short distance between pairs of atoms chosen at random in the two domains in question. Appropriate parameters governing the pulling function were determined empirically. The method was applied to the bi-lobal protein PGK and a closed-form activated ternary complex generated for Bacillus stearothermophilus PGK. This model was compared with the recently determined crystal structure of closed-form Trypanosoma brucei PGK. The model predicts the correct hinge regions, although the magnitude of movement at one hinge point was overestimated, and provides a reasonable representation of the closed-form ternary complex.

Correlation of the enzyme activities of Bacillus stearothermophilus lactate dehydrogenase on three substrates with the results of molecular dynamics/energy minimization conformational searching.

Current methods for reengineering enzyme substrate specificities rely heavily on the use of static x-ray crystallographic models. In this article we detail the use of a molecular mechanics approach for suggesting regions of Bacillus stearothermophilus L-lactate dehydrogenase (EC 1.1.1.27) involved in substrate specificity, and hence areas of interest for protein engineers. The approach combines molecular dynamics with energy minimization (MD/EM) to search the conformational space available to a 15-A sphere of the ternary complex centered on the catalytic histidine. The search is carried out by calculating a 30-ps dynamics trajectory at 300 K and minimizing structures at 1-ps intervals. The protocol has been performed on 14 systems containing different combinations of substrate and mutant/wt LDH. In order to discover which interactions are important in defining substrate specificity, eight conformational parameters representing substrate-active site interactions were measured in each of the 420 minimized structures. These parameters were then compared to the measured catalytic activity of the protein-substrate combinations. These comparisons show that arginine 109 orientation is a major determining factor in LDH specificity. Using this methodology it is possible to estimate the catalytic activity of proteins of varied sequence by computer simulation before synthesis.

D-2-hydroxy-4-methylvalerate dehydrogenase from Lactobacillus delbrueckii subsp. bulgaricus. I. Kinetic mechanism and pH dependence of kinetic parameters, coenzyme binding and substrate inhibition.

The steady-state kinetics of D-2-hydroxy-4-methylvalerate dehydrogenase have been studied at pH 8.0 by initial velocity, product inhibition, and dead-end inhibition techniques. The mechanism is rapid-equilibrium ordered in the NAD+ plus D-2-hydroxy-4-methylvalerate direction, and steady-state ordered in the other direction. In both cases coenzyme is the first substrate added and both the E-NADH-D-2-hydroxy-4-methylvalerate and E-NAD+-2-oxo-4-methylvalerate give rise to abortive complexes which cause excess substrate inhibition. Steady-state measurements show that the rate-limiting step in both directions at pH 8.0 is between formation of the enzyme-coenzyme-substrate ternary complex and the release of the first product of the reaction. Transient kinetics combined with primary kinetic deuterium isotope effects show that in the NADH-->NAD+ direction there is a slow, rate-limiting rearrangement of the E-NADH-oxoacid complex while hydride transfer is very fast. The release of NAD+ at pH 8.0 is 200-times faster than Kcat (NADH-->NAD+) whereas the release of NADH is only 5-times faster than Kcat (NAD+-->NADH). The pH dependence of NADH binding depends upon the presence of two ionizable residues with a pKa of about 5.9. The pH dependence of kinetic parameters is explained by a third ionizable residue with pKa values 7.2 (in the E-NADH complex) and < or = 6.4 (in the E-NAD+ complex) which may be the proton donor and acceptor for the chemical reaction. At pH 6.5 the mechanism changes in the NADH-->NAD+ direction to be partly limited by the chemical step with a measured primary kinetic isotope effect of 5.7 and partly by an only slightly faster dissociation of NAD+. In addition the inhibition by excess oxo-4-methylvalerate is more pronounced. The mechanism implies that removing the positive charges created by the two groups which control coenzyme affinity could both enhance the catalytic rate at pH 6.5 and diminish excess substrate inhibition to provide an enzyme better suited to the bulk synthesis of D-2-hydroxyacids.

D-2-hydroxy-4-methylvalerate dehydrogenase from Lactobacillus delbrueckii subsp. bulgaricus. II. Mutagenic analysis of catalytically important residues.

Five residues involved in catalysis and coenzyme binding have been identified in D-2-hydroxy-4-methylvalerate dehydrogenase from Lactobacillus delbrueckii subsp. bulgaricus by using biochemical and genetical methods. Enzyme inactivation with diethylpyrocarbonate indicated that a single histidine residue was involved in catalysis. Since H296 is the only conserved histidine in the whole family of NAD-dependent D-2-hydroxyacid dehydrogenases, we constructed the H296Q and H296S mutants and showed that their catalytic efficiencies were reduced 10(5)-fold compared with the wild-type enzyme. This low residual activity was shown to be insensitive to diethylpyrocarbonate. Taken together these data demonstrate that H296 is responsible for proton exchange in the redox reaction. Two acidic residues (D259 and E264) were candidates for maintaining H296 in the protonated state and their roles were examined by mutagenesis. The D259N and E264Q mutant enzymes both showed similar and large reductions in their Kcat/K(m) ratios (200-800-fold, depending on pH), indicating that either D259 or E264 (or both) could partner H296. The conserved R235 residue was a candidate for binding the alpha-carboxyl group of the substrate and it was changed to lysine. The R235K mutant showed a 104-fold reduced Kcat/K(m) due to both an increased K(m) and a reduced Kcat for 2-oxo-4-methylvalerate. Thus R235 plays a role in binding the substrate carboxylate similar to R171 in the L-lactate dehydrogenases. Finally, we constructed the H205Q mutant to test the role of this partially conserved histidine residue (in 10/13 enzymes of the family). This mutant enzyme displayed a 7.7-fold increased Kcat and a doubled catalytic efficiency at pH 5, was as sensitive to diethylpyrocarbonate as the wild-type but showed a sevenfold increased K(m) for NADH and a 100-fold increase in Kd for NADH together with 10-30-fold lower substrate inhibition. The transient kinetic behaviour of the H205Q mutant is as predicted from our previous study on the enzymatic mechanism of D-2-hydroxy-4-methylvalerate dehydrogenase which showed that coenzyme binding is highly pH dependent and indicated that release of the oxidised coenzyme is a significant component of the rate-limiting processes in catalysis at pH 6.5.

Protein engineering tests of a homology model of Plasmodium falciparum lactate dehydrogenase.

This paper describes the testing of a homology model of Plasmodium falciparum lactate dehydrogenase (pfLDH) by protein engineering. The model had been validated in structural terms. It suggests explanations of the unusual properties of pfLDH (compared with all other LDHs). These unusual features are a lack of substrate inhibition, high activity with the synthetic coenzyme 3-acetylpyridine adenine dinucleotide (APAD+) and changes in residues at previously conserved positions. pfLDH shows several amino acid insertions and deletions in an alignment with protein sequences from all other known LDHs. The most notable is a five amino acid insertion into the active-site loop. In addition, a conserved serine at position 163 is replaced by leucine. The results showed that when the unique pfLDH structural features were engineered into Bacillus stearothermophilus lactate dehydrogenase, the thermophilic enzyme acquired the properties previously uniquely associated with the malarial enzyme. We conclude that the homology model of the malarial enzyme is adequate for the prediction of successful redesigns and, in the regions tested, is accurate.

Removal of substrate inhibition in a lactate dehydrogenase from human muscle by a single residue change.

High concentrations of ketoacid substrates inhibit most natural hydroxyacid dehydrogenases due to the formation of an abortive enzyme-NAD+-ketoacid complex. It was postulated that this substrate inhibition could be eliminated from lactate dehydrogenases if the rate of NAD+ dissociation could be increased. An analysis of the crystal structure of mammalian LDHs showed that the amide of the nicotinamide cofactor formed a water-bridged hydrogen bond to S163. The LDH of Plasmodium falciparum is not inhibited by its substrate and, uniquely, in this enzyme the serine is replaced by a leucine. In the S163L mutant of human LDH-M4 pyruvate inhibition is, indeed, abolished and the enzyme retains high activity. However, the major contribution to this effect comes from a weakening of the interaction of pyruvate with the enzyme-coenzyme complex.

Guided evolution of enzymes with new substrate specificities.

A gene library was constructed coding for all possible variants of two amino acids (101, 102) in a solvent-exposed surface return loop (alpha E-beta D) of Bacillus stearothermophilus L-lactate dehydrogenase (bsLDH). All but one of 38 enzyme variants examined were thermally stable and had native-like hydrodynamic properties. In this sample, there was no bias detected in either the DNA or amino acid sequences encoded. We argue that the alpha E-beta D surface loop sequence is unimportant for protein folding or stability and can be fully varied to select enzymes with new substrate specificities. The selection of NAD-dependent dehydrogenases with specificity for: malate, phenyllactate, hydroxyisocaproate and 4-phenyl-2-hydroxy-butanoate from two bsLDH libraries is described. This required a highly discriminatory screen for 2-hydroxy acid dehydrogenase activity to select enzymes which, in the absence of the natural allosteric activator fructose-1,6-bisphosphate (FBP), maintained high temperature stability and catalytic activity without substrate inhibition. In general the amino acid residues at positions 101 and 102 which determined substrate specificity were as expected from hydrophobic and ionic complementarity to the substrate. For example, a bsLDH variant with Asn101Va1102 is as efficient with phenylpyruvate as is the wild-type enzyme (Asn101Gln102) with pyruvate. Using molecular modelling, the valine at position 102 can be fitted into the active site without significant structural distortion caused by the aromatic side-chain of the substrate. Similarly, nine out of ten malate dehydrogenases (MDHs) selected had an arginine residue at position 102 to complement the negatively charged carboxyl group in oxaloacetate. One, Arg101Arg102 (Kcat/Kmoxaloacetate = 1.6 x 10(6) M-1 S-1) is 25% more active than the previous best synthetic MDH. There were surprises: present understanding would not have predicted the oxaloacetate transforming activity of Ser101Leu102 or the phenylpyruvate activity of Pro101Lys102. The former is about one-third as efficient as the best malate dehydrogenase selected, whilst the latter had about one-seventh of the best phenylpyruvate dehydrogenase activity.

Cloning, sequencing and functional expression of a DNA encoding pig cytosolic malate dehydrogenase: purification and characterization of the recombinant enzyme.

Using the polymerase chain reaction, DNA encoding cytosolic malate dehydrogenase (cMDH) has been cloned from a pig heart cDNA library. Large amounts of the enzyme (30 mg per litre of original culture) have been produced in Escherichia coli using an inducible expression vector (pKK223-3) in which the 5'-non-coding region of the gene was replaced with the tac promoter. The complete nucleotide sequence of the DNA is reported for the first time. The recombinant cMDH purified was shown to be identical to the native enzyme according to: chromatographic behaviour, isoelectric point, N-terminal amino acid sequence, and physiochemical and catalytic properties.

Isolation, sequence and overexpression of the gene encoding NAD-dependent formate dehydrogenase from the methylotrophic yeast Candida methylica.

NAD-dependent formate dehydrogenase (FDH) was isolated from Candida methylica (Cm) grown on 0.5% methanol. Its N-terminal amino acid (aa) sequence was determined, as was that of a commercial FDH from Candida boidinii. Degenerate oligodeoxyribonucleotides were made to the 5' region of the fdh gene from Cm using this information and to the 3' region using C-terminal aa sequence data from the methylotropic yeast, Hansenula polymorpha. An almost complete 1.1-kb fragment was amplified from Cm genomic DNA via the polymerase chain reaction (PCR). This fragment was cloned, sequenced and used to probe a Southern blot, from which a 3.4-kb EcoRI fragment containing the fdh open reading frame (ORF) was isolated. The complete nucleotide sequence of this fdh ORF was determined and corresponds to a protein of 364 aa (40,343 Da). The ORF of fdh was cloned into pKK223-3 using PCR and transformed into Escherichia coli. Enzymatically active FDH was produced to 15% of soluble E. coli protein. The deduced aa sequence of this FDH is compared to the aa sequences of four known FDH, from bacteria, yeast, fungi and plant mitochondria.

D175 discriminates between NADH and NADPH in the coenzyme binding site of Lactobacillus delbrueckii subsp. bulgaricus D-lactate dehydrogenase.

The NAD-dependent D-(-)-lactate dehydrogenase (D-LDH) from Lactobacillus delbrueckii subsp. bulgaricus (in short, L. bulgaricus) has been modified at position 175 by site-directed mutagenesis, changing a conserved aspartate residue into an alanine. The D175A mutant enzyme displays a 40-fold shift in coenzyme preference from NADH to NADPH. This demonstrates that D175 truly belongs to the amino acid consensus GXGXXGX(17)D (where X represents any residue) which is the signature of the coenzyme binding site of most NAD-dependent dehydrogenases.

NAD(+)-dependent D-2-hydroxyisocaproate dehydrogenase of Lactobacillus delbrueckii subsp. bulgaricus. Gene cloning and enzyme characterization.

A genomic library from Lactobacillus delbrueckii subsp. bulgaricus was used to complement an Escherichia coli mutant strain deficient for both lactate dehydrogenase and pyruvate formate lyase, and thus unable to grow anaerobically. One recombinant clone was found to display a broad specificity NAD(+)-dependent D-2-hydroxyacid dehydrogenase activity. The corresponding gene (named hdhD) was subcloned and sequenced. The deduced amino acid sequence of the encoded enzyme indicates a 333-residue protein closely related to D-2-hydroxyisocaproate (i.e. 2-hydroxy-4-methyl-pentanoate) dehydrogenase (D-HO-HxoDH) of Lactobacillus casei and other NAD(+)-dependent D-lactate dehydrogenases (D-LDH) from several other bacterial species. The hdhD gene was overexpressed under the control of the lambda phage PL promoter and the enzyme was purified with a two-step method. The L. delbrueckii subsp. bulgaricus enzyme, like that of L. casei, was shown to be active on a wide variety of 2-oxoacid substrates except those having a branched beta-carbon.

Contribution of a buried aspartate residue towards the catalytic efficiency and structural stability of Bacillus stearothermophilus lactate dehydrogenase.

The X-ray structure of lactate dehydrogenase (LDH) shows the side-chain carboxylate group of Asp-143 to be buried in the hydrophobic interior of the enzyme, where it makes hydrogen-bonding interactions with both the side-chain hydroxyl group of Ser-273 and the main-chain amide group of His-195. This is an unusual environment for a carboxylate side-chain as hydrogen bonding normally occurs with water molecules at the surface of the protein. A charged hydrogen-bonding interaction in the interior of a protein would be expected to be much stronger than a similar interaction on the solvent-exposed exterior. In this respect the side-chain carboxylate group of Asp-143 appears to be important for maintaining tertiary structure by providing a common linkage point between three discontinuous elements of the secondary structure, alpha 1F, beta K and the beta-turn joining beta G and beta H. The contribution of the Asp-143 side-chain to the structure and function of Bacillus stearothermophilus LDH was assessed by creating a mutant enzyme containing Asn-143. The decreased thermal stability of both unactivated and fructose-1,6-diphosphate (Fru-1,6-P2)-activated forms of the mutant enzyme support a structural role for Asp-143. Furthermore, the difference in stability of the wild-type and mutant enzymes in guanidinium chloride suggested that the carboxylate group of Asp-143 contributes at least 22 kJ/mol to the conformational stability of the wild-type enzyme. However, there was no alteration in the amount of accessible tryptophan fluorescence in the mutant enzyme, indicating that the mutation caused a structural weakness rather than a gross conformational change. Comparison of the wild-type and mutant enzyme steady-state parameters for various 2-keto acid substrates showed the mutation to have a general effect on catalysis, with an average difference in binding energy of 11 kJ/mol for the transition-state complexes. The different effects of pH and Fru-1,6-P2 on the wild-type and mutant enzymes also confirmed a perturbation of the catalytic centre in the mutant enzyme. As the side-chain of Asp-143 is not sufficiently close to the active site to be directly involved in catalysis or substrate binding it is proposed that the effects on catalysis shown by the mutant enzyme are induced either by a structural change or by charge imbalance at the active site.(ABSTRACT TRUNCATED AT 400 WORDS)

Engineering surface loops of proteins--a preferred strategy for obtaining new enzyme function.

A prerequisite for the rational redesign of enzymes is that altering amino acids in an attempt to obtain new biological function does not unexpectedly alter the globular, natural framework of the native protein on which the design is being executed. The results of combinatorial-mutagenesis strategies suggest that random variation of amino acid sequence is most easily tolerated at the solvent-exposed surfaces of a protein. This review analyses effective redesigns of Bacillus stearothermophilus lactate dehydrogenase (bsLDH), in which all residue variations are at solvent-exposed surfaces. The majority of these variations were located within surface loops, which interconnect stable secondary structures traversing the globular core of the protein.

Allosteric activation in Bacillus stearothermophilus lactate dehydrogenase investigated by an X-ray crystallographic analysis of a mutant designed to prevent tetramerization of the enzyme.

The crystal structure of a mutant Bacillus stearothermophilus lactate dehydrogenase, into which an additional loop has been engineered in order to prevent tetramerization of the enzyme, has been solved and refined at 2.4 A. The minimal repeat unit in the crystal is a dimer and the tetramer cannot be generated by any of the crystallographic symmetry operations in P2(1). The loop protrudes out into the solvent, stabilized by a good hydrogen bonding arrangement, and clearly sterically hinders tetramer formation. This is the first structure of B. stearothermophilus lactate dehydrogenase (bsLDH) in which the allosteric activator fructose, 1,6-bisphosphate (FBP) is not present. To investigate the mechanism of allosteric activation in this enzyme we have compared the structure with a ternary complex of B. stearothermophilus lactate dehydrogenase. Many of our observations confirm those reported from a comparison of FBP-bound ternary bsLDH complex with an FBP free LDH from another bacterial source, Bifidobacterium longum. Our results suggest that quaternary structural alterations may have less influence on the mechanism than previously reported. The differences in the quaternary structural behaviour of these two enzymes is discussed.

The stability and hydrophobicity of cytosolic and mitochondrial malate dehydrogenases and their relation to chaperonin-assisted folding.

mMDH and cMDH are structurally homologous enzymes which show very different responses to chaperonins during folding. The hydrophilic and stable cMDH is bound by cpn60 but released by Mg-ATP alone, while the hydrophobic and unstable mMDH requires both Mg-ATP and cpn10. Citrate equalises the stability of the native state of the two proteins but has no effect on the co-chaperonin requirement, implying that hydrophobicity, and not stability, is the determining factor. The yield and rate of folding of cMDH is unaffected while that of mMDH is markedly increased by the presence of cpn60, cpn10 and Mg-ATP. In 200 mM orthophosphate, chaperonins do not enhance the rate of folding of mMDH, but in low phosphate concentrations chaperonin-assisted folding is 3-4-times faster.