ABSTRACT
High-throughput testing of photoelectrochemical cells and materials under well-defined operating conditions can accelerate the discovery of new semiconducting materials, the characterization of the phenomena occurring at the semiconductor-electrolyte interface, or the understanding of the coupled multi-physics transport phenomena of a complete working cell. However, there have been few high-throughput systems capable of dealing with complete cells and applying variations in real-life operating conditions, like temperature or irradiance. Understanding the effects of the variations of these real-life operating conditions on the performance of photoelectrode materials requires reliable and reproducible measurements. In this work, we report on a setup that simultaneously tests ten individual, identical photoelectrochemical cells whilst controlling temperature. The effects of temperature from 26 to 65 °C were studied in tin-doped hematite photoanodes for water splitting - as a reference case - through cyclic voltammetry and electrochemical impedance spectroscopy. The increase of surface-state-mediated charge recombination with temperature mainly penalized the energy conversion efficiency due to the reduction of the photovoltage produced. For parallel measurements in the ten individual cells, standard deviations from 20 to 60 mV for the onset potentials and less than 0.2 mA cm-2 for saturation current densities quantified the reproducibility of the results.
ABSTRACT
Understanding the fundamental thermodynamic limits of photo-electrochemical (PEC) water splitting is of great scientific and practical importance. In this work, a 'detailed balance' type model of solar quantum energy converters and non-linear circuit analysis is used to calculate the thermodynamic limiting efficiency of various configurations of PEC design. This model is released as freely accessible open-source (GNU GPL v3) code written in MATLAB with a graphical user interface (GUI). The capabilities of the model are demonstrated by simulating selected permutations of PEC design and results are validated against previous literature. This tool will enable solar fuel researchers to easily compare experimental results to theoretical limits to assess its realised performance using the GUI. Furthermore, the code itself is intended to be extendable and so can be modified to include non-ideal losses such as the over-potential required or complex optical phenomena.
ABSTRACT
When scaling up photo-electrochemical processes to larger areas than conventionally studied in the laboratory, substrate performance must be taken into consideration and in this work, a methodology to assess this via an uncomplicated 2 dimensional model is outlined. It highlights that for F-doped SnO2 (FTO), which is ubiquitously used for metal oxide photoanodes, substrate performance becomes significant for moderately sized electrodes (5 cm) under no solar concentration for state of the art Fe2O3 thin films. It is demonstrated that when the process is intensified via solar concentration, current losses become quickly limiting. Methodologies to reduce the impact of substrate ohmic losses are discussed and a new strategy is proposed. Due to the nature of the photo-electrode current-potential relationship, operation at a higher potential where the photo-current saturates (before the dark current is observed) will lead to a minimum in current loss due to substrate performance. Crucially, this work outlines an additional challenge in scaling up photo-electrodes based on low conductivity substrates, and establishes that such challenges are not insurmountable.