Effect of 980 nm photobiomodulation delivered by a handpiece with Gaussian vs. Flat-Top profiles on proliferation and differentiation of buccal fat pad stem cells.

The aim of this study was to compare the effectiveness of the Gaussian and Flat-Top profiles in proliferation and differentiation of mesenchymal stem cell of buccal fat pad. Based on the timing schedule and type of laser handpieces, the cells were assigned to a control group with no radiation, and two irradiation test groups (980 nm) with Flat-Top (F) (power of 1.1 W, beam area of 1 cm2 ) and standard Gaussian (G) (power of 0.7 W, beam area of 0.5 cm2 ) handpieces. Each test group was divided into three subgroups, receiving one time (60 J/cm2 ), two times (120 J/cm2 ), and three times (180 J/cm2 ) irradiation. 3-(4,5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide (MTT) and Annexin V tests were performed. The Alizarin Red staining and polymerase chain reaction tests were done both at the beginning and the end of the first and second weeks. The degree of mineralization and expression of osteogenic markers, RUNX2, OCN, and OPN were evaluated. Based on the MTT and Annexin V test results, both test groups outperformed the control group in degrees of cell proliferation during the first day of laser irradiation (p < 0.05). After one and two times irradiation, the expression of osteogenic markers in the test groups was significantly higher than the control group. PBM with Flat-Top and Gaussian handpieces can enhance ossification and cell differentiation regardless of the type of handpieces.

A Systematic Review of Discrete Choice Experiment Studies in Rheumatoid Arthritis Biological Medicines.

OBJECTIVE: Rheumatoid arthritis is a chronic disease with various clinical characteristics. The introduction of biological drugs has enhanced the efficacy and increased diversity of treatment options. Considering the patients' preferences in decision-making about treatment can improve their adherence. A discrete choice experiment is a type of conjoint method that can elicit preferences in more realistic scenarios. This article reviewed discrete choice experiment (DCE) studies to extract which attributes and levels were included in surveys. In addition, we focused on the process of designing surveys and the method that they used. Method: PubMed, EMBASE, Web of Science, Scopus, Ovid (Medline) and ProQuest were systematically searched in order to find studies that evaluated rheumatoid arthritis patients' preferences about biological medicines. Studies published in peer-reviewed journals between 1/1/1990 and 12/31/2019 were included. The included studies were analyzed using a narrative synthesis method and descriptive statistics. RESULTS: A total of 7124 studies were initially found. After deleting irrelevant and duplicate studies, 15 studies were included. The most common attributes that were used in surveys were efficacy, adverse effect, route of administration, frequency of administration, and cost. Most studies used a literature review for developing attributes and levels. The median number of included attributes and levels were seven and three, respectively. Eight studies explained their experimental design while seven studies did not. Conditional logit and mixed logit were the most common methods for modeling reciprocally. CONCLUSION: Several aspects of DCE studies investigating biological drugs in RA were assessed. Explaining the sample size, experimental design, and qualitative work for developing attributes can improve this type of study.

Effect of 5 Popular Disinfection Methods on Microflora of Laboratory: Customized Implant Abutments.

PURPOSE: To compare the efficacy of 5 different decontamination methods of titanium abutments and to assess their possible effects on surface roughness of titanium. MATERIALS AND METHODS: Micrococcus luteus, Acinetobacter baumannii, Enterococcus faecalis, and Candida albicans were cocultured to form a multispecies biofilm on 18 titanium discs. In another group, Bacillus subtilis, a spore-forming species, was cultivated on another set of 18 titanium discs. Each group was further divided into 5 test groups: high-pressure steam cleaning (4 Mpa, 5 seconds), NaOCl (1% active chlorine, 5 minutes), H2O2 (3%, 5 minutes), GaAlAs laser (810 nm, CW, 1 W, 400-µm fiber, 1-mm distance, 1 minute), Er:YAG laser (2940 nm, pulse mode, 100 mJ, 10 Hz, 230-µm noncontact handpiece, 4-mm distance, 50/50% air/water, 1 minute), and a control group of no treatment. After each decontamination procedure, the remaining microbial load was reported as colony-forming unit/disc. To evaluate the effect of each treatment on titanium discs, surface roughness parameters including Sa, Sq, Ssk, Sku, Sal, and Sdr were measured at 6 points of each disc using an atomic force microscope. RESULTS: Complete disinfection was achieved using high-pressure steam, NaOCl, H2O2, and Er:YAG laser. GaAlAs laser was able to reduce microbial count over 90%. Sa and Sq parameters were only increased significantly in diluted NaOCl group in comparison with control group, whereas Sdr was increased significantly in both absolute and diluted NaOCl groups. CONCLUSION: All the methods could decontaminate machined titanium surfaces, although complete microbial elimination was not achieved by diode laser. None of the treatments altered surface roughness significantly, except for sodium hypochlorite (NaOCl).

Frequency of Dental Implants Placed in the Esthetic Zone in Dental Clinic of Tehran University: A Descriptive Study.

OBJECTIVES: Anterior maxilla, known as the esthetic zone, plays an important role in facial and smile esthetics. This study assessed the frequency of implant treatments in the esthetic zone of patients presenting to Dental Implant Department of Tehran University during 2002-2012. MATERIALS AND METHODS: This descriptive study was conducted on dental records of patients receiving implant treatment during 2002-2012. Patient records were retrieved from the archives and patient demographics, implant characteristics, failure rate, prevalence of complications and implant systems were collected. The data were reported as frequency and percentage. RESULTS: Of a total of 2,381 implants placed in the mentioned time period, 492 (20.8%) had been placed in the anterior maxilla and 531 (22.3%) had been placed in the anterior mandible from canine to canine. Timing of implant placement was immediate in 12.0%, early in 0.5% and late in 87.4%. Survival rate was 99.1%. Rate of failure was 0.8%. Failure rate was 0.4% in the maxillary and 1.1% in the mandibular canine to canine region. Complications were reported in 10.1% of patients. Rate of complications was 18.3% in the maxillary canine to canine, 8.9% in the mandibular canine to canine, 18.1% in the maxillary first premolar to first premolar and 9.5% in the mandibular first premolar to first premolar. The frequency of bone grafts placed in these areas was 17.6%, 33.9%, 13.6%, 32.1% and 14.3%, respectively. CONCLUSION: Of implants placed in our center, around 20% were in the anterior maxilla, and delayed implant placement was the most commonly adopted technique.

The Effect of Root Canal Irrigation with Combination of Sodium Hypo-chlorite and Chlorhexidine Gluconate on the Sealing Ability of Obturation Materials.

OBJECTIVES: The aim of this study was to evaluate the effect of the precipitate that was formed by combining Sodium Hypochlorite (NaOCl) and Chlorhexidine Gluconate (CHX) on the sealing ability of root canal obturation materials. MATERIALS AND METHODS: The fluid filtration method was conducted on a total of 100 roots. Samples were randomly divided into two control (n=5) and three experimental groups (n=30). The samples in group 1 were irrigated with 1.5 mL of 2.5% NaOCl, and then the smear layers of the teeth were removed by 17% EDTA, while the specimens of group 2 were irrigated by 1.5 mL of 2.5% NaOCl and 1.5 mL of 2% CHX; after the smear layer removal, a final flush with 1.5 mL of 2.5% NaOCl was performed. The samples of group 3 were irrigated the same as group 1 but after the smear layer removal canals were irrigated again with 1.5 mL of 2.5% NaOCl and then a final flush with 1.5 mL of 2% CHX was performed. Teeth were obturated with gutta-percha and AH26 sealer and after seven days, microleakage was evaluated by the fluid filtration technique. The results were analyzed by the ANOVA and Tukey's test. RESULTS: The samples in group 3 had significantly greater microleakage compared to teeth in group 1, 2 (p<0.05), and the specimens in group 1 showed significantly less amount of microleakage than samples in group 2, 3 (p<0.05). CONCLUSION: The presence of the precipitate that is formed due to interaction between NaOCl and CHX has negative effect on the sealing ability of gutta-percha and AH26 sealer.