Colloidal Engineering of Microplastic Capture with Biodegradable Soft Dendritic "Microcleaners".

The introduction of colloidal principles that enable efficient microplastic collection from aquatic environments is a goal of great environmental importance. Here, we present a novel method of microplastic (MP) collection using biodegradable hydrogel soft dendritic colloids (hSDCs). These dendritic colloids have abundant nanofibrils and a large surface area, which provide an abundance of interfacial interactions and excellent networking capabilities, allowing for the capture of plastic particles and other contaminants. Here, we show how the polymer composition and morphology of the hSDCs can impact the capture of microplastics modeled by latex microbeads. Additionally, we use colloidal DLVO theory to interpret the capture efficiencies of microbeads of different sizes and surface functional groups. The results demonstrate the microplastic remediation efficiency of hydrogel dendricolloids and highlight the primary factors involved in the microbead interactions and adsorption. On a practical level, the results show that the development of environmentally benign microcleaners based on naturally sourced materials could present a sustainable solution for microplastic cleanup.

Solvent-Assisted Filling of Liquid Metal and Its Selective Dewetting for the Multilayered 3D Interconnect in Stretchable Electronics.

As stretchable electronics are rapidly developing and becoming complex, the requirement for stretchable, multilayered, and large-area printed circuit boards (PCBs) is emerging. This demands a stretchable electrode and its vertical interconnect access (via) for 3-dimensional (3D) connectivity between layers. Here, we demonstrate solvent-assisted liquid metal (LM) filling into the submicrometer channel (∼400 nm), including via-hole filling and selective dewetting of LM. We provide the theoretical background of solvent-assisted LM filling and selective dewetting and reveal the osmotic pressure arising from anomalous mass transport phenomena, case II diffusion, which drives negative pressure, the spontaneous pulling of LM into the open channel. Also, we suggest design criteria for the geometry and dimension of LM interconnects to obtain structural stability without dewetting, based on the theoretical and computational background. We demonstrate a simple stretchable near-field communication (NFC) device including transferred micrometer-size light-emitting diodes (LEDs) with only 230 µm to the stretchable liquid metal PCB, without any soldering process. The device operates stably under repetitive stretching and releasing (∼50% uniaxial strain) due to the stable connection through the LM via between the upper and lower layers. Finally, we propose a concept for modular-type stretchable electronics, based on the cohesive liquid nature of LM. As a building block, the functional module can be easily removed from a mainframe, and replaced by another functional module, to suit user demand.

A Liquid Metal Mediated Metallic Coating for Antimicrobial and Antiviral Fabrics.

Fabrics are widely used in hospitals and many other settings for bedding, clothing, and face masks; however, microbial pathogens can survive on surfaces for a long time, leading to microbial transmission. Coatings of metallic particles on fabrics have been widely used to eradicate pathogens. However, current metal particle coating technologies encounter numerous issues such as nonuniformity, processing complexity, and poor adhesion. To overcome these issues, an easy-to-control and straightforward method is reported to coat a wide range of fabrics by using gallium liquid metal (LM) particles to facilitate the deposition of liquid metal copper alloy (LMCu) particles. Gallium particles coated on the fabric provide nucleation sites for forming LMCu particles at room temperature via galvanic replacement of Cu2+ ions. The LM helps promote strong adhesion of the particles to the fabric. The presence of the LMCu particles can eradicate over 99% of pathogens (including bacteria, fungi, and viruses) within 5 min, which is significantly more effective than control samples coated with only Cu. The coating remains effective over multiple usages and against contaminated droplets and aerosols, such as those encountered in facemasks. This facile coating method is promising for generating robust antibacterial, antifungal, and antiviral fabrics and surfaces.

On-Demand Drug Release from Gold Nanoturf for a Thermo- and Chemotherapeutic Esophageal Stent.

Stimuli-responsive delivery systems for cancer therapy have been increasingly used to promote the on-demand therapeutic efficacy of anticancer drugs and, in some cases, simultaneously generate heat in response to a stimulus, resulting in hyperthermia. However, their application is still limited due to the systemic drawbacks of intravenous delivery, such as rapid clearance from the bloodstream and the repeat injections required for sustained safe dosage, which can cause overdosing. Here, we propose a gold (Au)-coated nanoturf structure as an implantable therapeutic interface for near-infrared (NIR)-mediated on-demand hyperthermia chemotherapy. The Au nanoturf possessed long-lasting doxorubicin (DOX) duration, which helps facilitate drug release in a sustained and prolonged manner. Moreover, the Au-coated nanoturf provides reproducible hyperthermia induced by localized surface plasmon resonances under NIR irradiation. Simultaneously, the NIR-mediated temperature increase can promote on-demand drug release at desired time points. For in vivo analysis, the Au nanoturf structure was applied on an esophageal stent, which needs sustained anticancer treatment to prevent tumor recurrence on the implanted surface. This thermo- and chemo-esophageal stent induced significant cancer cell death with released drug and hyperthermia. These phenomena were also confirmed by theoretical analysis. The proposed strategy provides a solution to achieve enhanced thermo-/chemotherapy and has broad applications in sustained cancer treatments.

A semi-permanent and durable nanoscale-crack-based sensor by on-demand healing.

Although sensitivity and durability are desirable in a sensor, both of them cannot be easily achieved. Site-specific and effective signal acquisition on the limited area of a sensor inevitably allows fatigue accumulation and contamination. For example, an ultrasensitive nanoscale-crack-based sensor for detecting a mechanical stimulus with tremendous sensitivity (a gauge factor greater than 2000 under 2% strain), yet limited durability (up to a few thousand stretching cycles in tensile tests) has been presented previously. Herein, we suggest a simple yet robust nanoscale-crack-based sensor that achieves remarkable durability through the use of a self-healable polymer. The self-healable polymer helps the crack gap recover and maintain high stability for 1 million cycles under 2% strain. Moreover, site-specific recovery with infrared light irradiation was demonstrated with monolithic arrayed sensors. The proposed strategy provides a unique solution to achieving highly enhanced durability and high mechanosensitivity, which are typically incompatible.

Effective Assembly of Nano-Ceramic Materials for High and Anisotropic Thermal Conductivity in a Polymer Composite.

Recently, anisotropic heat dissipation and its management have drawn attention as a promising technique for highly integrated electrical devices. Among many potentially challenging materials such as carbon nanotube, graphene, metal particles, and inorganic ceramics commonly used for high thermally conductive fillers in a composite form, nanoscale ceramic fillers are considered ideal candidates due to their thermal conductivity, electrical insulation, and low thermal expansion coefficient. However, enhancing the thermal conductivity of a randomly dispersed ceramic-polymer composite is limited by its discontinuous filler contact and thermal expansion coefficient mismatch. Thus, recent research has focused on how to assemble and generate highly networked filler contacts to make effective pathways for heat flow, with minimized concentration of the filler in the composite. In this review, we will introduce several essential strategies to assemble fillers with a two- or three-dimensional networked composite for highly enhanced anisotropic heat dissipation. Moreover, this review elucidates filler alignment effects compared to randomly dispersed ceramic composites.