ABSTRACT
The purpose of this study was to recycle red mud, an industrial byproduct that generates 300,000 tons per year, into the construction industry. Red mud was prepared as a liquid, neutralized with sulfuric acid, and replaced with cement mortar. The properties of liquefied red mud (LRM) neutralized with sulfuric acid (LRM + S) were investigated as well as its effect on cement mortar's mechanical and hydration characteristics. The pH of LRM + S stabilized at 7.6; its SO3 content was ~4.19% higher than that of LRM. Sulfites were contributed by calcium and sodium sulfate. The flows and setting times of the mortars containing LRM and LRM + S decreased as the substitution rate increased. The compressive strength of mortar that replaced 5% of cement with LRM + S was similar to that of the plain cement mortar. Scanning electron microscopy and X-ray diffraction revealed that the hydration products of LRM + S-containing cement mortar were similar to those of the plain cement mortar. Thus, LRM + S can be used as a cement substitute.
ABSTRACT
Nanoparticles have been attracting attention because they can significantly improve the performance of membranes when added in small amounts. In this study, the effect of polyamide membranes incorporating hydrophilic nitrogen/phosphorus-doped carbon dots (NP-CDs) to enhance water vapor/N2 separation has been investigated. NP-CD nanoparticles with many hydrophilic functional groups are synthesized from chitosan by a one-pot green method and introduced to the surface of the polysulfone (PSf) substrates by interfacial polymerization reaction. The mean particle diameter of NP-CDs, estimated from transmission electron microscopy images, is 2.6 nm. By adding NP-CDs (0-1.5 wt%) to the polyamide layer, the contact angles of the membranes dramatically decreased from 65° (PSf) to <9° (thin film nanocomposite (TFN)), which means that the TFN membranes become significantly hydrophilic. From the water vapor separation results, the addition of NP-CDs in the polyamide layer improves the water vapor permeance from 1511 (thin film composite (TFC) without nanoparticles) to 2448 GPU (TFN with 1.0 wt% NP-CD loading, CD-TFN(1.0)) and the water vapor/N2 selectivity from 73 (TFC) to 854 (CD-TFN(1.0)). To our knowledge, this is the first study of highly functionalized NP-CD-incorporated polyamide membranes to enhance water vapor separation.
ABSTRACT
Mass-producible superhydrophobic surfaces with remarkably identical appearance and efficiency through a mold fabrication and hot embossing process are reported.
ABSTRACT
Remarkably increased permeabilities for the separation of an important binary gas pair (CO2/N2) by polymer-ionic liquid gel membranes are reported.
ABSTRACT
Nanofiltration (NF) is an attractive technique for reducing F- concentrations to acceptable levels in drinking water, but commercial NF membranes such as NF 270 and NF 90 show minimal Cl-/F- selectivity. In contrast, simple layer-by-layer deposition of 4.5-bilayer poly(styrene sulfonate) (PSS)/poly(diallyldimethylammonium chloride) (PDADMAC) films on porous alumina supports yields NF membranes that exhibit Cl-/F- and Br-/F- selectivities>3 along with solution fluxes that are >3-fold higher than those of the commercial membranes. Fluoride rejection by (PSS/PDADMAC)4PSS membranes, which is >70%, is independent of pressure over a range of 3.6 to 6.0 bar, suggesting that the primary transport mechanism in these films is convection. Moreover, the fact that Br-/F- selectivity is 12% higher than Cl-/F- selectivity suggests that discrimination among the monovalent ions is based on size (Stokes radius). Chloride/fluoride selectivities are essentially constant over Cl-/F- feed ratios from 1 to 60, so these separations will be viable over a range of conditions. Interestingly, PSS/protonated poly(allylamine) films show little Cl-/F- selectivity, and the selectivity of PSS/PDADMAC membranes is a strong function of the number of deposited layers, indicating that NF properties are very sensitive to film structure.
