Preparation and characterization of cellulose nanofiber cryogels as oil absorbents and enzymatic lipolysis scaffolds.

Cellulose nanofiber (CNF) materials have received much attention as sustainable "green" materials with high mechanical properties. Their application in oil absorption and enzymatic lipolysis makes them further attractive from the perspective of environmental issues including marine pollution preservation. Herein, we prepared CNF cryogels with various surface properties, evaluated their capacities as oil absorbents and applied them as lipase-lipolysis scaffolds. Their obtained cryogels consisted of various modified CNFs and their structure and properties were investigated. Moreover, lipase-supported CNF cryogels were prepared for enzymatic lipolysis. The cryogels of protonated TEMPO-oxidized CNF showed the highest absorption capacity for olive oil, while all the CNF cryogels possessed similar absorption abilities towards water. In enzymatic lipolysis with lipase, the TEMPO-oxidized CNF (TOCN-Na+) cryogel showed the highest specific activity. The specific activities of lipase in TOCN-Na+ cryogels remained unchanged after being stored at 40 °C for 3 days.

Surface Modification of Poly(ether ether ketone) through Friedel-Crafts Reaction for High Adhesion Strength.

Poly(ether ether ketone) (PEEK) possesses attractive mechanical and thermal properties but demonstrates poor adhesion. To overcome this disadvantage, in this study, the surface modification of PEEK or PEEK-based carbon-fiber-reinforced thermoplastics (CFRTP) was performed through the Friedel-Crafts reaction and successive epoxidation. Under optimized reaction conditions, surface modification was achieved without surface deterioration, and epoxy groups were introduced. The progress of the Friedel-Crafts reaction and epoxidation was demonstrated by X-ray photoelectron spectroscopy measurements after fluorine labeling through thiol-en reaction and amine addition, respectively. The adhesive strength between CFRTP and epoxy adhesives was increased to 23.5 MPa, and cohesive fracture of epoxy adhesives, rather than interfacial peeling, occurred. In addition, compared with conventional plasma treatment, the durability of the modified surface and thickness of the modified surface layer increased. Therefore, we succeeded in modifying the surface properties through the epoxidation of the PEEK surface.

Collagen/Cellulose Nanofiber Blend Scaffolds Prepared at Various pH Conditions.

Living tissues modules consist of highly organized cells and extracellular matrices (ECMs) in a hierarchical manner. Among these ECMs, type I collagen (COL), which is the most abundant protein, is widely accepted in the tissue engineering field due to its biocompatibility. However, improvement of mechanical properties of COL scaffolds still remains a challenge. We prepared the scaffold sheets with blends of COL and 2,2,6,6-tetramethylpiperidine-1-oxil(TEMPO)-oxidized cellulose nanofiber (TOCN). TOCNs with high mechanical properties reinforced COL scaffolds. Moreover, we prepared their blends under various pH conditions and investigated their mechanical properties and biocompatibilities. Sheets prepared at a higher pH possess a better mechanical performance. From Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy measurements, it is proved that the higher mechanical properties were attributed to COL triple inter helix structure, hydrogen interaction, and electrostatic interaction with TOCN. The biocompatibilities of COL/TOCN prepared at a higher pH were increased. We successfully demonstrated COL/TOCN blend materials with a high mechanical strength and high biocompatibility for scaffold materials.

Effect of ultrasonic pretreatment on emulsion polymerization of styrene.

This study investigated the effect of pretreatment of ultrasonic irradiation on emulsion polymerization of styrene to propose a process intensification method which gives high conversion, high reaction rate, and high energy efficiency. The solution containing styrene monomer was irradiated by a horn mounted on the ultrasonic transducer with the diameter of 5mm diameter and the frequency of 28 kHz before starting polymerization. The pretreatment of ultrasound irradiation as short as 1 min drastically improved monomer dispersion and increased reaction rate even under the agitation condition with low rotational speed of impeller. Furthermore, the ultrasonic pretreatment resulted in higher monomer concentration in polymer particles and produced larger polymer particles than conventional polymerization without ultrasonic pretreatment.

Effects of heating on the mechanical and chemical properties of human dentin.

OBJECTIVES: We had previously discovered that the flexural and tensile strengths of human dentin were 2-2.4 times greater after being heated to 140°C, and deduced that the generation of higher-density structures and therefore dehydration probably promoted the increased strength. Our test hypotheses were that intertubular dentin, which constitutes a major part of organic components, was selectively affected by heating, and such changes could happen without critical damages to the basic structure of dentin type I collagen. METHODS: Micro-mechanical changes of human dentin by heating at 140°C were investigated by nano-indentation. Chemical changes in dentin collagen after heating were also investigated by X-ray diffraction study, a microscopic Fourier transform infrared (micro-FTIR) and a laser Raman spectroscopic analyses, and a cross-linking analysis by high-performance liquid chromatography. RESULTS: The results of nano-indentation showed that the micro-hardness of intertubular dentin increased after heating at 140°C to 1.8 times more than unheated dentin; on the other hand, peritubular dentin was unchanged. Results of X-ray diffraction showed that the lateral packing of collagen molecules shrank from 13.6±0.3 to 10.6±0.1Å after heating, but the shrinkage reversed to the original after rehydration for seven days. After heating, no substantial chemical changes in the collagen molecules were detected in tests by micro-FTIR or Raman analyses, or by cross-linking analysis. SIGNIFICANCE: These results suggest that intertubular dentin, which contains most of the type I collagen, was selectively affected by heating at 140°C without critical damage to its collagen.

Temperature-dependent higher order structures of the (Pro-Pro-Gly)10-modified dendrimer.

Collagen is the most abundant protein in mammals and is widely used as a biomaterial for tissue engineering and drug delivery. We previously reported that dendrimers and linear polymers, modified with collagen model peptides (Pro-Pro-Gly)5, form a collagen-like triple-helical structure; however, its triple helicity needs improvement. In this study, a collagen-mimic dendrimer modified with the longer collagen model peptides, (Pro-Pro-Gly)10, was synthesized and named PPG10-den. Circular dichroism analysis shows that the efficiency of the triple helix formation in PPG10-den was much improved over the original. The X-ray diffraction analysis suggests that the higher order structure was similar to the collagen triple helix. The thermal stability of the triple helix in PPG10-den was higher than in the PPG10 peptide itself and our previous collagen-mimic polymers using (Pro-Pro-Gly)5. Interestingly, PPG10-den also assembled at low temperatures. Self-assembled structures with spherical and rod-like shapes were observed by transmission electron microscopy. Furthermore, a hydrogel of PPG10-den was successfully prepared which exhibited the sol-gel transition around 45°C. Therefore, the collagen-mimic dendrimer is a potential temperature-dependent biomaterial.

High-resolution structures of collagen-like peptides [(Pro-Pro-Gly)4-Xaa-Yaa-Gly-(Pro-Pro-Gly)4]: implications for triple-helix hydration and Hyp(X) puckering.

Structures of (Pro-Pro-Gly)4-Xaa-Yaa-Gly-(Pro-Pro-Gly)4 (ppg9-XYG) where (Xaa, Yaa)=(Pro, Hyp), (Hyp, Pro) or (Hyp, Hyp) were analyzed at high resolution using synchrotron radiation. Molecular and crystal structures of these peptides are very similar to those of the (Pro-Pro-Gly)9 peptide. The results obtained in this study, together with those obtained from related compounds, indicated the puckering propensity of the Hyp in the X position: (1) Hyp(X) residues involved in the Hyp(X):Pro(Y) stacking pairs prefer the down-puckering conformation, as in ppg9-OPG, and ppg9-OOG; (2) Hyp(X) residues involved in the Hyp(X):Hyp(Y) stacking pairs prefer the up-puckering conformation if there is no specific reason to adopt the down-puckering conformation. Water molecules in these peptide crystals are classified into two groups, the 1st and 2nd hydration waters. Water molecules in the 1st hydration group have direct hydrogen bonds with peptide oxygen atoms, whereas those in the 2nd hydration group do not. Compared with globular proteins, the number of water molecules in the 2nd hydration shell of the ppg9-XYG peptides is very large, likely due to the unique rod-like molecular structure of collagen model peptides. In the collagen helix, the amino acid residues in the X and Y positions must protrude outside of the triple helix, which forces even the hydrophobic side chains, such as Pro, to be exposed to the surrounding water molecules. Therefore, most of the waters in the 2nd hydration shell are covering hydrophobic Pro side chains by forming clathrate structures.

Solvent effects on isotactic poly(methyl methacrylate) crystallization and syndiotactic poly(methacrylic acid) incorporation in porous thin films prepared by stepwise stereocomplex assembly.

The solvent effects on the crystallization of porous isotactic (it) poly(methyl methacrylate) (PMMA) thin films as well as the incorporation behavior of syndiotactic (st) poly(methacrylic acid) (PMAA) into the porous films were investigated. The porous it-PMMA thin films were prepared by the extraction of st-PMAA from a stepwise layer-by-layer (LbL) assembly composed of it-PMMA and st-PMAA. The X-ray diffraction pattern of the it-PMMA thin films after immersion in acetonitrile/water (4/6, v/v) showed two characteristic peaks of a crystalline it-PMMA double-stranded helix (2theta = 9 degrees and 14 degrees , d = 0.96 and 0.62 nm). This suggested that acetonitrile promoted the crystallization of the thin films, because water is a nonsolvent for PMMA. The surface structural change of the it-PMMA films was also analyzed by atomic force microscopy. The it-PMMA conformation was maintained after crystallization as observed by infrared spectroscopy. The incorporation percentages of st-PMAA into the porous it-PMMA thin films under various solvent conditions were estimated using a quartz crystal microbalance. The incorporation of st-PMAA decreased as the it-PMMA films crystallized or with growing thickness of the porous it-PMMA films. This suggested that the polymer-polymer interactions and the entanglement of the it-PMMA chains played an important role. The incorporation was promoted as the acetonitrile content in the st-PMAA solution increased, indicating that it was necessary for st-PMAA incorporation to solvate it-PMMA.

Helical twists of collagen model peptides.

Average helical twists were calculated by the method of Sugeta and Miyazawa (Biopolymers 1967, 5, 673-679) for all of the collagen model peptides analyzed to date. Calculation of the helical twists of all triplets in each peptide strand provided novel insights for several model peptides. In the (Pro-Pro-Gly)n (n = 9 and 10), the helical twists showed cyclic fluctuations between 40 and 65 degrees with a 20 A period, suggesting that their molecular conformations were close enough to the ideal 7/2-helix to show the helical repeat of 20 A. Rather small helical twists in the guest regions of IBP in complex and T3-785 were attributed to the interaction with Integrin I domain and a relaxed conformation caused by three consecutive triplets lacking imino acid residues, respectively. Although most of the triplets used in this study were imino acid-rich triplets, helical twists were scattered in a wide range from 30 to 70 degrees with an overall average of 52.6 degrees . This distribution of helical twists indicated a strong preference for the 7/2-helical conformation (51.4 degrees ) rather than the 10/3-helical model (36 degrees ).

Repetitive interactions observed in the crystal structure of a collagen-model peptide, [(Pro-Pro-Gly)9]3.

The crystal structure of a collagen-model peptide [(Pro-Pro-Gly)(9)](3) has been determined at 1.33 A resolution. Diffraction data were collected at 100 K using synchrotron radiation, which led to the first structural study of [(Pro-Pro-Gly)(n)](3) under cryogenic conditions. The crystals belong to the P2(1) space group with cell parameters of a = 25.95, b = 26.56, c = 80.14 Angstroms and beta = 90.0 degrees. The overall molecular conformation was consistent with the left-handed 7/2-helical model with an axial repeat of 20 A for native collagen. A total of 332 water molecules were found in an asymmetric unit. Proline residues in adjacent triple-helices exhibited three types of hydrophobic interactions. Furthermore, three types of hydrogen-bonding networks mediated by water molecules were observed between adjacent triple-helices. These hydrophobic interactions and hydrogen-bonding networks occurred at intervals of 20 Angstroms along the c-axis based on the previous sub-cell structures [(Pro-Pro-Gly)(n)](3) (n = 9, 10), which were also seen in the full-cell structure of [(Pro-Pro-Gly)(10)](3). Five proline residues at the Y position in the X-Y-Gly triplet were found in a down-puckering conformation, this being inconsistent with the recently proposed propensity-based hypothesis. These proline residues were forced to adopt opposing puckering because of the prevailing hydrophobic interaction between triple-helices compared with the Pro:Pro stacking interaction within a triple-helix.

Crystal structures of collagen model peptides with Pro-Hyp-Gly repeating sequence at 1.26 A resolution: implications for proline ring puckering.

Triple-helical structures of (Pro-Hyp-Gly)n (n = 10, 11) at 100 K and room temperature (RT) were analyzed at 1.26 A resolution by using synchrotron radiation data. Totals of 49 and 42 water molecules per seven triplets in an asymmetric unit were found for the structures at 100 K and RT, respectively. These water molecules were classified into two groups, those in the first and second hydration shells. Although there was no significant difference between water molecules in the first shell at 100 K and those at RT, a significant difference between those in the second shell was observed. That is, the number of water molecules at RT decreased to one half and the average distance from peptide chains at RT became longer by about 0.3 A. On the other hand, of seven triplets in an asymmetric unit, three proline residues at the X position at 100 K clearly showed an up-puckering conformation, as opposed to the recent propensity-based hypothesis for the stabilization and destabilization of triple-helical structures by proline hydroxylation. This puckering was attributed to the interaction between proline rings and the surrounding water molecules at 100 K, which is much weaker at RT, as shown by longer average distance from peptide chains.