Atomically dispersed asymmetric cobalt electrocatalyst for efficient hydrogen peroxide production in neutral media.

Electrochemical hydrogen peroxide (H2O2) production (EHPP) via a two-electron oxygen reduction reaction (2e- ORR) provides a promising alternative to replace the energy-intensive anthraquinone process. M-N-C electrocatalysts, which consist of atomically dispersed transition metals and nitrogen-doped carbon, have demonstrated considerable EHPP efficiency. However, their full potential, particularly regarding the correlation between structural configurations and performances in neutral media, remains underexplored. Herein, a series of ultralow metal-loading M-N-C electrocatalysts are synthesized and investigated for the EHPP process in the neutral electrolyte. CoNCB material with the asymmetric Co-C/N/O configuration exhibits the highest EHPP activity and selectivity among various as-prepared M-N-C electrocatalyst, with an outstanding mass activity (6.1 × 105 A gCo-1 at 0.5 V vs. RHE), and a high practical H2O2 production rate (4.72 mol gcatalyst-1 h-1 cm-2). Compared with the popularly recognized square-planar symmetric Co-N4 configuration, the superiority of asymmetric Co-C/N/O configurations is elucidated by X-ray absorption fine structure spectroscopy analysis and computational studies.

Spectroscopic Identification of Active Sites of Oxygen-Doped Carbon for Selective Oxygen Reduction to Hydrogen Peroxide.

The electrochemical synthesis of hydrogen peroxide (H2 O2 ) via a two-electron (2 e- ) oxygen reduction reaction (ORR) process provides a promising alternative to replace the energy-intensive anthraquinone process. Herein, we develop a facile template-protected strategy to synthesize a highly active quinone-rich porous carbon catalyst for H2 O2 electrochemical production. The optimized PCC900 material exhibits remarkable activity and selectivity, of which the onset potential reaches 0.83 V vs. reversible hydrogen electrode in 0.1 M KOH and the H2 O2 selectivity is over 95 % in a wide potential range. Comprehensive synchrotron-based near-edge X-ray absorption fine structure (NEXAFS) spectroscopy combined with electrocatalytic characterizations reveals the positive correlation between quinone content and 2 e- ORR performance. The effectiveness of chair-form quinone groups as the most efficient active sites is highlighted by the molecule-mimic strategy and theoretical analysis.

Tracking single adatoms in liquid in a transmission electron microscope.

Single atoms or ions on surfaces affect processes from nucleation1 to electrochemical reactions2 and heterogeneous catalysis3. Transmission electron microscopy is a leading approach for visualizing single atoms on a variety of substrates4,5. It conventionally requires high vacuum conditions, but has been developed for in situ imaging in liquid and gaseous environments6,7 with a combined spatial and temporal resolution that is unmatched by any other method-notwithstanding concerns about electron-beam effects on samples. When imaging in liquid using commercial technologies, electron scattering in the windows enclosing the sample and in the liquid generally limits the achievable resolution to a few nanometres6,8,9. Graphene liquid cells, on the other hand, have enabled atomic-resolution imaging of metal nanoparticles in liquids10. Here we show that a double graphene liquid cell, consisting of a central molybdenum disulfide monolayer separated by hexagonal boron nitride spacers from the two enclosing graphene windows, makes it possible to monitor, with atomic resolution, the dynamics of platinum adatoms on the monolayer in an aqueous salt solution. By imaging more than 70,000 single adatom adsorption sites, we compare the site preference and dynamic motion of the adatoms in both a fully hydrated and a vacuum state. We find a modified adsorption site distribution and higher diffusivities for the adatoms in the liquid phase compared with those in vacuum. This approach paves the way for in situ liquid-phase imaging of chemical processes with single-atom precision.

Ion exchange in atomically thin clays and micas.

The physical properties of clays and micas can be controlled by exchanging ions in the crystal lattice. Atomically thin materials can have superior properties in a range of membrane applications, yet the ion-exchange process itself remains largely unexplored in few-layer crystals. Here we use atomic-resolution scanning transmission electron microscopy to study the dynamics of ion exchange and reveal individual ion binding sites in atomically thin and artificially restacked clays and micas. We find that the ion diffusion coefficient for the interlayer space of atomically thin samples is up to 104 times larger than in bulk crystals and approaches its value in free water. Samples where no bulk exchange is expected display fast exchange at restacked interfaces, where the exchanged ions arrange in islands with dimensions controlled by the moiré superlattice dimensions. We attribute the fast ion diffusion to enhanced interlayer expandability resulting from weaker interlayer binding forces in both atomically thin and restacked materials. This work provides atomic scale insights into ion diffusion in highly confined spaces and suggests strategies to design exfoliated clay membranes with enhanced performance.

Nanometre imaging of Fe3GeTe2 ferromagnetic domain walls.

Fe3GeTe2 is a layered crystal which has recently been shown to maintain its itinerant ferromagnetic properties even when atomically thin. Here, differential phase contrast scanning transmission electron microscopy is used to investigate the domain structure in a Fe3GeTe2 cross-sectional lamella at temperatures ranging from 95 to 250 K and at nanometre spatial resolution. Below the experimentally determined Curie temperature (T C) of 191 K, stripe domains magnetised along 〈0001〉, bounded with 180◦ Bloch type domain walls, are observed, transitioning to mixed Bloch-Néel type where the cross-sectional thickness is reduced below 50 nm. When warming towards T C, these domains undergo slight restructuring towards uniform size, before abruptly fading at T C. Localised loss of ferromagnetic order is seen over time, hypothesised to be a frustration of ferromagnetic order from ambient oxidation and basal cracking, which could enable selective modification of the magnetic properties for device applications.

Atomic Resolution Imaging of CrBr3 Using Adhesion-Enhanced Grids.

Suspended specimens of 2D crystals and their heterostructures are required for a range of studies including transmission electron microscopy (TEM), optical transmission experiments, and nanomechanical testing. However, investigating the properties of laterally small 2D crystal specimens, including twisted bilayers and air-sensitive materials, has been held back by the difficulty of fabricating the necessary clean suspended samples. Here we present a scalable solution that allows clean free-standing specimens to be realized with 100% yield by dry-stamping atomically thin 2D stacks onto a specially developed adhesion-enhanced support grid. Using this new capability, we demonstrate atomic resolution imaging of defect structures in atomically thin CrBr3, a novel magnetic material that degrades in ambient conditions.

Enhanced Superconductivity in Few-Layer TaS2 due to Healing by Oxygenation.

When approaching the atomically thin limit, defects and disorder play an increasingly important role in the properties of two-dimensional (2D) materials. While defects are generally thought to negatively affect superconductivity in 2D materials, here we demonstrate the contrary in the case of oxygenation of ultrathin tantalum disulfide (TaS2). Our first-principles calculations show that incorporation of oxygen into the TaS2 crystal lattice is energetically favorable and effectively heals sulfur vacancies typically present in these crystals, thus restoring the electronic band structure and the carrier density to the intrinsic characteristics of TaS2. Strikingly, this leads to a strong enhancement of the electron-phonon coupling, by up to 80% in the highly oxygenated limit. Using transport measurements on fresh and aged (oxygenated) few-layer TaS2, we found a marked increase of the superconducting critical temperature (Tc) upon aging, in agreement with our theory, while concurrent electron microscopy and electron-energy loss spectroscopy confirmed the presence of sulfur vacancies in freshly prepared TaS2 and incorporation of oxygen into the crystal lattice with time. Our work thus reveals the mechanism by which certain atomic-scale defects can be beneficial to superconductivity and opens a new route to engineer Tc in ultrathin materials.

Formation and Healing of Defects in Atomically Thin GaSe and InSe.

Two dimensional III-VI metal monochalcogenide materials, such as GaSe and InSe, are attracting considerable attention due to their promising electronic and optoelectronic properties. Here, an investigation of point and extended atomic defects formed in mono-, bi-, and few-layer GaSe and InSe crystals is presented. Using state-of-the-art scanning transmission electron microscopy, it is observed that these materials can form both metal and selenium vacancies under the action of the electron beam. Selenium vacancies are observed to be healable: recovering the perfect lattice structure in the presence of selenium or enabling incorporation of dopant atoms in the presence of impurities. Under prolonged imaging, multiple point defects are observed to coalesce to form extended defect structures, with GaSe generally developing trigonal defects and InSe primarily forming line defects. These insights into atomic behavior could be harnessed to synthesize and tune the properties of 2D post-transition-metal monochalcogenide materials for optoelectronic applications.

Room-Temperature Production of Nanocrystalline Molybdenum Disulfide (MoS2) at the Liquid-Liquid Interface.

Scalable synthesis of 2D materials is a prerequisite for their commercial exploitation. Here, a novel method of producing nanocrystalline molybdenum disulfide (MoS2) at the liquid-liquid interface is demonstrated by decomposing a molecular precursor (tetrakis(N,N-diethyldithiocarbamato) molybdenum(IV)) in an organic solvent. The decomposition occurs over a few hours at room temperature without stirring or the addition of any surfactants, producing MoS2 which can be isolated onto substrates of choice. The formation of MoS2 at the liquid-liquid interface can be accelerated by the inclusion of hydroxide ions in the aqueous phase, which we propose to act as a catalyst. The precursor concentration was varied to minimize MoS2 thickness, and the organic solvent was chosen to optimize the speed and quality of formation. The kinetics of the MoS2 formation has been investigated, and a reaction mechanism has been proposed. The synthesis method is, to the best of our knowledge, the first reported room-temperature synthesis of transition-metal dichalcogenides, offering a potential solution to scalable 2D material production.

Direct synthesis of MoS2 or MoO3via thermolysis of a dialkyl dithiocarbamato molybdenum(iv) complex.

Direct synthesis of either 2H-MoS2 or α-MoO3 is made possible by thermolysis of the same single source precursor in either argon or air at moderate temperatures.