ABSTRACT
BaSO4 fibres with morphological complexity were formed in aqueous solution with polyacrylate and partially monophosphonated poly(ethyleneoxide)-block-poly(methacrylic acid) additives by a simple precipitation reaction. For polyacrylate, formation of the fibrous deposits was strongly dependent on the level of supersaturation (S) and Ba2+:polymer molar ratio (R). At S = 60 to 80, and R = 3 to 14, highly anisotropic crystalline fibres consisting of bundles of BaSO4 nanofilaments were formed after several weeks, although the yield was low. The nanofilaments were also organized into cone-shaped aggregates at S = 80, and at lower R values these formed higher-order structures that consisted of multiple cone-on-cone assemblies with remarkable self-similarity. Increasing the supersaturation produced ovoid or cross-shaped dendritic particles for the range of molar ratios studied. In contrast, BaSO4 crystallisation in the presence of a partially phosphonated block copolymer gave a high yield of BaSO4 fibres up to 100 microm in length, and consisting of co-aligned bundles of 30 nm-diameter defect-free single-crystal nanofilaments with a uniform growth tip. A model for the defect-free growth of BaSO4 nanofilaments in aqueous polymer solutions based on amorphous precursor particles, vectorially directing forces and van der Waals attraction is proposed.
ABSTRACT
The chemical construction of organized architectures is an important aspect of innovative materials synthesis. Bicontinuous water-filled microemulsions can be used as preorganized systems for the fabrication of crystalline calcium phosphate materials with extended reticulated microstructures. These macroporous materials are formed by mineralization reactions located within the interconnecting water channels of the bicontinuous network. The resulting materials represent replicas of the microemulsion architecture, but the pore sizes are incommensurate, suggesting that secondary modifications in the bicontinuous microstructure occur during crystal growth. Synthetic macroporous calcium phosphates could have uses in biomaterial implants.