Novel Biomaterials in Glaucoma Treatment.

Glaucoma is a significant cause of blindness worldwide, and its treatment remains challenging. The disease progressively leads to damage to the optic disc and thus loss of visual acuity and visual field. High intraocular pressure (IOP) is a common risk factor. There are three major methods to treat this disease: topical, laser, and surgical. None of these are completely satisfactory; therefore, alternatives using new biomaterials are being sought. Since biomaterial engineering has experienced significant growth in recent decades, its products are gradually being introduced to various branches of medicine, with the exception of ophthalmology. Biomaterials, such as glaucoma drainage implants, have been successfully used to treat glaucoma. There is significant ongoing research on biomaterials as drug delivery systems that could overcome the disadvantages of topical glaucoma treatment, such as poor intraocular penetration or frequent drug administration. This article summarizes the use of novel biomaterials for glaucoma treatment presented in the literature. The literature search was based on articles published in English on PubMed.gov, Cochranelibrary.com, and Scopus.com between 2018 and 2023 using the following term "biomaterials in glaucoma." A total of 103 published articles, including twenty-two reviews, were included. Fifty-nine articles were excluded on the basis of their titles and abstracts.

The Impacts of the Sterilization Method and the Electrospinning Conditions of Nanofibrous Biodegradable Layers on Their Degradation and Hemocompatibility Behavior.

The use of electrospun polymeric biodegradable materials for medical applications is becoming increasingly widespread. One of the most important parameters regarding the functionality of nanofiber scaffolds during implantation and the subsequent regeneration of damaged tissues concerns their stability and degradation behavior, both of which are influenced by a wide range of factors (the properties of the polymer and the polymer solution, the technological processing approach, the sterilization method, etc.). This study monitored the degradation of nanofibrous materials fabricated from degradable polyesters as a result of the sterilization method applied (ethylene oxide and gamma irradiation) and the solvent system used to prepare the spun polymer solution. Aliphatic polyesters PCL and PLCL were chosen for this study and selected with respect to the applicability and handling in the surgical setting of these nanofibrous materials for vascular bandaging. The results revealed that the choice of solvent system exerts a significant impact on degradation during sterilization, especially at higher gamma irradiation values. The subsequent enzyme-catalyzed degradation of the materials following sterilization indicated that the choice of the sterilization method influenced the degradation behavior of the materials. Whereas wave-like degradation was evident concerning ethylene oxide sterilization, no such behavior was observed following gamma-irradiation sterilization. With concern for some of the tested materials, the results also indicated the potential for influencing the development of degradation within the bulk versus degradation from the surface of the material. Both the sterilization method and the choice of the spinning solvent system were found to impact degradation, which was observed to be most accelerated in the case of PLCL (L-lactide-co-caprolactone copolymer) electrospun from organic acids and subsequently sterilized using gamma irradiation. Since we planned to use these materials in cardiovascular applications, it was decided that their hemocompatibility would also be tested. The results of these tests revealed that changes in the structures of the materials initiated by sterilization may exert thrombogenic and anticoagulant impacts. Moreover, the microscopic analysis suggested that the solvent system used in the preparation of the materials potentially affects the behavior of erythrocytes; however, no indication of the occurrence of hemolysis was detected.

Large-Scale Development of Antibacterial Scaffolds: Gentamicin Sulfate-Loaded Biodegradable Nanofibers for Gastrointestinal Applications.

The ever-increasing demands of modern medicine drive the development of novel drug delivery materials. In particular, nanofibers are promising for such materials due to their favorable properties. However, most development is still carried out through laboratory techniques that do not allow extensive and reproducible characterization of materials, which slows medical research. In this work, we focus on the large-scale fabrication and testing of specific antibacterial nanofibrous materials to prevent the postoperative complications associated with the occurrence of bacterial infection. Poly-ε-caprolactone with gentamicin sulfate (antibiotic) in different concentrations was electrospun via a needleless device. The amount of antibiotics was proven by elemental analysis, UV spectrophotometry, and HPLC. The cytocompatibility of the materials was verified in vitro according to ISO 10993-5. The cell adhesion and proliferation were assessed after 2, 7, 14, and 21 days using the CCK-8 metabolic assay, fluorescence, and scanning electron microscopy. The tested nanofiber materials supported cell growth. Antibacterial tests were performed to confirm the release of gentamicin sulfate, and its antibacterial properties were proven toward Staphylococcus gallinarum and Escherichia coli bacteria. The effect of ethylene oxide sterilization was also studied. The sterilized nanofibrous layers are cytocompatible while antibacterial and therefore suitable for medical applications.

Antiadhesive Nanofibrous Materials for Medicine: Preventing Undesirable Tissue Adhesions.

Undesirable postoperative tissue adhesions remain among the most common complications after surgery. Apart from pharmacological antiadhesive agents, various physical barriers have been developed in order to prevent postoperative tissue adhesions. Nevertheless, many introduced materials suffer from shortcomings during in vivo application. Thus, there is an increasing need to develop a novel barrier material. However, various challenging criteria have to be met, so this issue pushes the research in materials to its current limits. Nanofibers play a major role in breaking the wall of this issue. Due to their properties, such as a large surface area for functionalization, tunable degradation rate, or the possibility of layering individual nanofibrous materials, it is feasible to create an antiadhesive surface while maintaining biocompatibility. There are many ways to produce nanofibrous material; electrospinning is the most used and versatile technique. This review reveals the different approaches and puts them into context.

An Assessment of Blood Vessel Remodeling of Nanofibrous Poly(ε-Caprolactone) Vascular Grafts in a Rat Animal Model.

The development of an ideal vascular prosthesis represents an important challenge in terms of the treatment of cardiovascular diseases with respect to which new materials are being considered that have produced promising results following testing in animal models. This study focuses on nanofibrous polycaprolactone-based grafts assessed by means of histological techniques 10 days and 6 months following suturing as a replacement for the rat aorta. A novel stereological approach for the assessment of cellular distribution within the graft thickness was developed. The cellularization of the thickness of the graft was found to be homogeneous after 10 days and to have changed after 6 months, at which time the majority of cells was discovered in the inner layer where the regeneration of the vessel wall was found to have occurred. Six months following implantation, the endothelialization of the graft lumen was complete, and no vasa vasorum were found to be present. Newly formed tissue resembling native elastic arteries with concentric layers composed of smooth muscle cells, collagen, and elastin was found in the implanted polycaprolactone-based grafts. Moreover, the inner layer of the graft was seen to have developed structural similarities to the regular aortic wall. The grafts appeared to be well tolerated, and no severe adverse reaction was recorded with the exception of one case of cartilaginous metaplasia close to the junctional suture.

Cerebrospinal fluid neurofilament light chains and CXCL13 as predictive factors for clinical course of multiple sclerosis.

AIM: The aim of this study was to identify whether NfL and CXCL13 cerebrospinal fluid (CSF) concentrations at diagnostic lumbar puncture can predict the course of multiple sclerosis (MS) in terms of relapses, higher expanded disability status scale (EDSS) and magnetic resonance imaging (MRI) activity. METHODS: We conducted a single-centre prospective observational cohort study at the MS center, University Hospital Ostrava, Czech Republic. CSF NfL (cNfL) and CXCL13 concentrations were examined (ELISA method) in patients with clinically isolated syndrome (CIS) and relapsing-remitting MS (RRMS) at the time of diagnostic lumbar puncture. RESULTS: A total of 44 patients with CIS or early RRMS were enrolled, 31 (70.5%) of whom were women. The median age at the time of CSF sampling was 31.21 years (IQR 25.43-39.32), and the follow-up period was 54.6 months (IQR 44.03-59.48). In the simple and multiple logistic regression models, CXCL13 levels did not predict relapses, MRI activity or EDSS > 2.5. Similarly, cNfL concentrations did not predict relapses or MRI activity in either model. In the multiple regression, higher cNfL levels were associated with reaching EDSS > 2.5 (odds ratio [OR] 1.002, 95% confidence interval [CI] 1.000 to 1.003). CONCLUSIONS: Our data did not confirm cNfL and/or CXCL13 CSF levels were predictive factors for disease activity such as relapses and MRI activity at the time of diagnostic lumbar puncture in patients with RRMS. While cNfL CSF levels predicted higher disability only after adjustment for other known risk factors, elevated CSF CXCL13 did not predict higher disability at all.

Double-layered Nanofibrous Patch for Prevention of Anastomotic Leakage and Peritoneal Adhesions, Experimental Study.

BACKGROUND/AIM: Anastomotic leakage is a feared complication in colorectal surgery. Postoperative peritoneal adhesions can also cause life-threatening conditions. Nanofibrous materials showed their pro-healing properties in various studies. The aim of the study was to evaluate the impact of double-layered nanofibrous materials on anastomotic healing and peritoneal adhesions formation. MATERIALS AND METHODS: Two versions of double-layered materials from polycaprolactone and polyvinyl alcohol were applied on defective anastomosis on the small intestine of healthy pigs. The control group remained with uncovered defect. Tissue specimens were subjected to histological analysis and adhesion scoring after 3 weeks of observation. RESULTS: The wound healing was inferior in the experimental groups, however, no anastomotic leakage was observed and the applied material always kept covering the defect. The extent of adhesions was larger in the experimental groups. CONCLUSION: Nanofibrous materials may prevent anastomotic leakage but delay healing.

Reinforcement of Colonic Anastomosis with Improved Ultrafine Nanofibrous Patch: Experiment on Pig.

Anastomotic leakage is a dreadful complication in colorectal surgery. It has a negative impact on postoperative mortality, long term life quality and oncological results. Nanofibrous polycaprolactone materials have shown pro-healing properties in various applications before. Our team developed several versions of these for healing support of colorectal anastomoses with promising results in previous years. In this study, we developed highly porous biocompatible polycaprolactone nanofibrous patches. We constructed a defective anastomosis on the large intestine of 16 pigs, covered the anastomoses with the patch in 8 animals (Experimental group) and left the rest uncovered (Control group). After 21 days of observation we evaluated postoperative changes, signs of leakage and other complications. The samples were assessed histologically according to standardized protocols. The material was easy to work with. All animals survived with no major complication. There were no differences in intestinal wall integrity between the groups and there were no signs of anastomotic leakage in any animal. The levels of collagen were significantly higher in the Experimental group, which we consider to be an indirect sign of higher mechanical strength. The material shall be further perfected in the future and possibly combined with active molecules to specifically influence the healing process.

A PVDF electrospun antifibrotic composite for use as a glaucoma drainage implant.

Glaucoma disease therapy frequently involves the application of a glaucoma implant. This approach is effective in terms of reducing the intraocular pressure via the filtering of intraocular fluid from the anterior chamber into the drainage pathways. The basic properties of such implants comprise of long-term stability and the filtering of fluids without the occurrence of undesirable blockages. This study describes the design and production of a novel material for the treatment of glaucoma disease that is based on electrospinning technology. Non-toxic, biocompatible and non-degradable polyvinylidenefluoride (PVDF) was selected as the implant material. The research investigated the resistance of this material to the growth of a fibroblast cell line without the use of antifibrotic agents such as mitomycin C. Three different types of PVDF were electrospun separately and mixed with polyethyleneoxide (PEO), following which the degree of cell growth resistance was evaluated. It was discovered that the fiber layers that contained PVDF blended with PEO evinced a statistically significant difference in metabolic activity compared to the PURE PVDF layers. Only small cell clusters formed on the layers that were resistant to cell fibrotization. As a result of the observed clustering, a new program was developed in MATLAB software for the determination of the number of cells involved in cluster formation, which then allowed for the determination of the spatial dependence between the cells in the form of a point pattern. The study describes a simple technique for the production of composite PVDF+PEO structures suitable for use in the field of glaucoma treatment.

Impact of Various Sterilization and Disinfection Techniques on Electrospun Poly-ε-caprolactone.

Electrospun materials made from biodegradable polycaprolactone are used widely in various tissue engineering and regenerative medicine applications because of their morphological similarity to the extracellular matrix. However, the main prerequisite for the use of such materials in clinical practice consists of the selection of the appropriate sterilization technique. This study is devoted to the study of the impact of traditional sterilization and disinfection methods on a nanofibrous polycaprolactone layer constructed by means of the needleless electrospinning technique. It was determined that hydrogen peroxide plasma treatment led to the loss of fibrous morphology and the creation of a foil. However, certain sterilization (ethylene oxide, gamma irradiation, and peracetic acid) and disinfection techniques (ethanol and UV irradiation) were found not to lead to a change in morphology; thus, the study investigates their impact on thermal properties, molecular weight, and interactions with a fibroblast cell line. It was determined that the surface properties that guide cell adhesion and proliferation were affected more than the bulk properties. The highest proliferation rate of fibroblasts seeded on nanofibrous scaffolds was observed with respect to gamma-irradiated polycaprolactone, while the lowest proliferation rate was observed following ethylene oxide sterilization.

Experimental fortification of intestinal anastomoses with nanofibrous materials in a large animal model.

Anastomotic leakage is a severe complication in gastrointestinal surgery. It is often a reason for reoperation together with intestinal passage blockage due to formation of peritoneal adhesions. Different materials as local prevention of these complications have been studied, none of which are nowadays routinely used in clinical practice. Nanofabrics created proved to promote healing with their structure similar to extracellular matrix. We decided to study their impact on anastomotic healing and formation of peritoneal adhesions. We performed an experiment on 24 piglets. We constructed 3 hand sutured end-to-end anastomoses on the small intestine of each pig. We covered the anastomoses with a sheet of polycaprolactone nanomaterial in the first experimental group, with a sheet of copolymer of polylactic acid with polycaprolactone in the second one and no fortifying material was used in the Control group. The animals were sacrificed after 3 weeks of observation. Clinical, biochemical and macroscopic signs of anastomotic leakage or intestinal obstruction were monitored, the quality of the scar tissue was assessed histologically, and a newly developed scoring system was employed to evaluate the presence of adhesions. The material is easy to manipulate with. There was no mortality or major morbidity in our groups. No statistical difference was found inbetween the groups in the matter of level of peritoneal adhesions or the quality of the anastomoses. We created a new adhesion scoring system. The material appears to be safe however needs to be studied further to prove its' positive effects.

The assessment of electrospun scaffolds fabricated from polycaprolactone with the addition of L-arginine.

Polycaprolactone (PCL) was electrospun with the addition of arginine (Arg), an α-amino acid that accelerates the healing process. The efficient needleless electrospinning technique was used for the fabrication of the nanofibrous layers. The materials produced consisted mainly of fibers with diameters of between 200 and 400 nm. Moreover, both microfibers and beads were present within the layers. Higher bead sizes were observed with the increased addition of arginine. The arginine content within the layers as well as the weight of the resultant electrospun materials were enhanced with the increased addition of arginine to the electrospinning solution (1, 5 and 10 wt%). The PCL + 1% Arg nanofibrous layer contained 5.67 ± 0.04% of arginine, the PCL + 5% Arg layer 22.66 ± 0.24% of arginine and the PCL + 10% Arg layer 37.33 ± 0.39% of arginine according to the results of the elemental analysis. A high burst release within 5 h of soaking was recorded for the PCL + 5% and PCL + 10% nanofibrous layers. However, the release rate of arginine from the PCL + 1% Arg was significantly slower, reaching a maximum level after 72 h of soaking. The resulting materials were hydrophobic. Hemocompatibility testing under static conditions revealed no effect on hemolysis following the addition of arginine and the prolongation of the prothrombin time with the increased addition of arginine, thus exerting an influence on the extrinsic and common pathway of coagulation activation. The results of the dynamic hemocompatibility assessment revealed that the numbers of blood cells and platelets were not affected significantly by the various electrospun samples during incubation. The TAT, ß-thromboglobulin and SC5-b9 concentrations were characterized by a moderate increase in the PCL group compared to those of the control group. The presence of arginine resulted in a decrease in the investigated hemocompatibility markers. The PMN elastase levels were comparable with respect to all the groups.

Histological mapping of porcine carotid arteries - An animal model for the assessment of artificial conduits suitable for coronary bypass grafting in humans.

BACKGROUND: Using animal models in experimental medicine requires mapping of their anatomical variability. Porcine common carotid arteries (CCA) are often preferred for the preclinical testing of vascular grafts due to their anatomical and physiological similarity to human small-diameter arteries. Comparing the microscopic structure of animal model organs to their human counterparts reveals the benefits and limitations of translational medicine. METHODS: Using quantitative histology and stereology, we performed an extensive mapping of the regional proximodistal differences in the fractions of elastin, collagen, and smooth muscle actin as well as the intima-media and wall thicknesses among 404 segments (every 1 cm) of porcine CCAs collected from male and female pigs (n = 21). We also compared the microscopic structure of porcine CCAs with segments of human coronary arteries and one of the preferred arterial conduits used for the coronary artery bypass grafting (CABG), namely, the internal thoracic artery (ITA) (n = 21 human cadavers). RESULTS: The results showed that the histological structure of left and right porcine CCA can be considered equivalent, provided that gross anatomical variations of the regular branching patterns are excluded. The proximal elastic carotid (51.2% elastin, 4.2% collagen, and 37.2% actin) transitioned to more muscular middle segments (23.5% elastin, 4.9% collagen, 54.3% actin) at the range of 2-3 centimeters and then to even more muscular distal segments (17.2% elastin, 4.9% collagen, 64.0% actin). The resulting morphometric data set shows the biological variability of the artery and is made available for biomechanical modeling and for performing a power analysis and calculating the minimum number of samples per group when planning further experiments with this widely used large animal model. CONCLUSIONS: Comparison of porcine carotids with human coronary arteries and ITA revealed the benefits and the limitations of using porcine CCAs as a valid model for testing bioengineered small-diameter CABG vascular conduits. Morphometry of human coronary arteries and ITA provided more realistic data for tailoring multilayered artificial vascular prostheses and the ranges of values within which the conduits should be tested in the future. Despite their limitations, porcine CCAs remain a widely used and well-characterized large animal model that is available for a variety of experiments in vascular surgery.

Electrospun vascular grafts fabricated from poly(L-lactide-co-ε-caprolactone) used as a bypass for the rabbit carotid artery.

The study involved the electrospinning of the copolymer poly(L-lactide-co-ε-caprolactone) (PLCL) into tubular grafts. The subsequent material characterization, including micro-computed tomography analysis, revealed a level of porosity of around 70%, with pore sizes of 9.34 ± 0.19 µm and fiber diameters of 5.58 ± 0.10 µm. Unlike fibrous polycaprolactone, the electrospun PLCL copolymer promoted fibroblast and endothelial cell adhesion and proliferation in vitro. Moreover, the regeneration of the vessel wall was detected following implantation and, after six months, the endothelialization of the lumen and the infiltration of arranged smooth muscle cells producing collagen was observed. However, the degradation rate was found to be accelerated in the rabbit animal model. The study was conducted under conditions that reflected the clinical requirements-the prostheses were sutured in the end-to-side fashion and the long-term end point of prosthesis healing was assessed. The regeneration of the vessel wall in terms of endothelialization, smooth cell infiltration and the presence of collagen fibers was observed after six months in vivo. A part of the grafts failed due to the rapid degradation rate of the PLCL copolymer.

How does the surface treatment change the cytocompatibility of implants made by selective laser melting?

INTRODUCTION: The study investigates the potential for producing medical components via Selective Laser Melting technology (SLM). The material tested consisted of the biocompatible titanium alloy Ti6Al4V. The research involved the testing of laboratory specimens produced using SLM technology both in vitro and for surface roughness. The aim of the research was to clarify whether SLM technology affects the cytocompatibility of implants and, thus, whether SLM implants provide suitable candidates for medical use following zero or minimum post-fabrication treatment. Areas covered: The specimens were tested with an osteoblast cell line and, subsequently, two post-treatment processes were compared: non-treated (as-fabricated) and glass-blasted. Interactions with MG-63 cells were evaluated by means of metabolic MTT assay and microscope techniques (scanning electron microscopy, fluorescence microscopy). Surface roughness was observed on both the non-treated and glass-blasted SLM specimens. Expert Commentary: The research concluded that the glass-blasting of SLM Ti6Al4V significantly reduces surface roughness. The arithmetic mean roughness Ra was calculated at 3.4 µm for the glass-blasted and 13.3 µm for the non-treated surfaces. However, the results of in vitro testing revealed that the non-treated surface was better suited to cell growth.

Generating standardized image data for testing and calibrating quantification of volumes, surfaces, lengths, and object counts in fibrous and porous materials using X-ray microtomography.

Quantification of the structure and composition of biomaterials using micro-CT requires image segmentation due to the low contrast and overlapping radioopacity of biological materials. The amount of bias introduced by segmentation procedures is generally unknown. We aim to develop software that generates three-dimensional models of fibrous and porous structures with known volumes, surfaces, lengths, and object counts in fibrous materials and to provide a software tool that calibrates quantitative micro-CT assessments. Virtual image stacks were generated using the newly developed software TeIGen, enabling the simulation of micro-CT scans of unconnected tubes, connected tubes, and porosities. A realistic noise generator was incorporated. Forty image stacks were evaluated using micro-CT, and the error between the true known and estimated data was quantified. Starting with geometric primitives, the error of the numerical estimation of surfaces and volumes was eliminated, thereby enabling the quantification of volumes and surfaces of colliding objects. Analysis of the sensitivity of the thresholding upon parameters of generated testing image sets revealed the effects of decreasing resolution and increasing noise on the accuracy of the micro-CT quantification. The size of the error increased with decreasing resolution when the voxel size exceeded 1/10 of the typical object size, which simulated the effect of the smallest details that could still be reliably quantified. Open-source software for calibrating quantitative micro-CT assessments by producing and saving virtually generated image data sets with known morphometric data was made freely available to researchers involved in morphometry of three-dimensional fibrillar and porous structures in micro-CT scans.

Comprehensive assessment of electrospun scaffolds hemocompatibility.

Biodegradable polyesters, namely polycaprolactone (PCL) and copolymer of polylactide and polycaprolactone (PLCL) were electrospun into various fibrous structures and their hemocompatibility was evaluated in vitro. Firstly, hemolytic effect was evaluated upon incubation with diluted whole blood. The results showed that the degree of hemolysis depended on chemical composition and fibrous morphology. Electrospun polycaprolactone induced slight degree of hemolysis depending on its molecular weight and fibrous morphology; copolymer PLCL did not cause detectable hemolysis. The influence of coagulation pathways was examined by measurement of coagulation times. It was showed that intrinsic coagulation pathway assessed by activated partial thromboplastin time (APTT) was moderately accelerated after incubation with PCL and prolonged after incubation with copolymer PLCL. Extrinsic activation of coagulation tested by prothrombin time (PT) was slightly accelerated after incubation with all tested electrospun samples. Thrombogenicity assessment of fibrous samples revealed high thrombogenic properties of fibrous materials that was comparable to high degree of collagen thrombogenicity. The level of platelet activation was dependent on chemical composition and surface morphology of tested materials.

Reprint of: Cytotoxicity, cell uptake and microscopic analysis of titanium dioxide and silver nanoparticles in vitro.

Commercially manufactured nanomaterials are used massively for modification of products of everyday use, including products intended for children. Therefore their potential risks have to be ultimately studied. Aside from toxicity of nanomaterials with known specific parameters, the end-consumer is potentially endangered by materials with unknown specification. Commercially available products are not usually accompanied by parameter/specification sheet providing the consumer with sufficient chemico-physical parameters allowing the evaluation of possible toxic effects. The aim of this work was to evaluate the declared parameters of commercially available TiO2 and Ag NPs employing chemico-physical methods and consequently in vitro cytotoxicity and genotoxicity tests performed on non-cancer cell lines. Based on the results of our complex study we can conclude that the data provided by the producers are not in good agreement with the performed measurements. Furthermore, all tested NPs penetrated into the SVK14 cells and all NPs had significant effect on the kinetics of ROS production in all cell lines (note: the ROS production has not been established as the major mechanism of cell damage elicited by Ag NPs). The study revealed greater cytotoxic potential of Ag NPs in comparison with TiO2 NPs and all of the studied NPs caused significant DNA damage.

Cytotoxicity, cell uptake and microscopic analysis of titanium dioxide and silver nanoparticles in vitro.

Commercially manufactured nanomaterials are used massively for modification of products of everyday use, including products intended for children. Therefore their potential risks have to be ultimately studied. Aside from toxicity of nanomaterials with known specific parameters, the end-consumer is potentially endangered by materials with unknown specification. Commercially available products are not usually accompanied by parameter/specification sheet providing the consumer with sufficient chemico-physical parameters allowing the evaluation of possible toxic effects. The aim of this work was to evaluate the declared parameters of commercially available TiO2 and Ag NPs employing chemico-physical methods and consequently in vitro cytotoxicity and genotoxicity tests performed on non-cancer cell lines. Based on the results of our complex study we can conclude that the data provided by the producers are not in good agreement with the performed measurements. Furthermore, all tested NPs penetrated into the SVK14 cells and all NPs had significant effect on the kinetics of ROS production in all cell lines (note: the ROS production has not been established as the major mechanism of cell damage elicited by Ag NPs). The study revealed greater cytotoxic potential of Ag NPs in comparison with TiO2 NPs and all of the studied NPs caused significant DNA damage.

In vitro cytotoxicity analysis of doxorubicin-loaded/superparamagnetic iron oxide colloidal nanoassemblies on MCF7 and NIH3T3 cell lines.

One of the promising strategies for improvement of cancer treatment is based on magnetic drug delivery systems, thus avoiding side effects of standard chemotherapies. Superparamagnetic iron oxide (SPIO) nanoparticles have ideal properties to become a targeted magnetic drug delivery contrast probes, named theranostics. We worked with SPIO condensed colloidal nanocrystal clusters (MagAlg) prepared through a new soft biomineralization route in the presence of alginate as the polymeric shell and loaded with doxorubicin (DOX). The aim of this work was to study the in vitro cytotoxicity of these new MagAlg-DOX systems on mouse fibroblast and breast carcinoma cell lines. For proper analysis and understanding of cell behavior after administration of MagAlg-DOX compared with free DOX, a complex set of in vitro tests, including production of reactive oxygen species, comet assay, cell cycle determination, gene expression, and cellular uptake, were utilized. It was found that the cytotoxic effect of MagAlg-DOX system is delayed compared to free DOX in both cell lines. This was attributed to the different mechanism of internalization of DOX and MagAlg-DOX into the cells, together with the fact that the drug is strongly bound on the drug nanocarriers. We discovered that nanoparticles can attenuate or even inhibit the effect of DOX, particularly in the tumor MCF7 cell line. This is a first comprehensive study on the cytotoxic effect of DOX-loaded SPIO compared with free DOX on healthy and cancer cell lines, as well as on the induced changes in gene expression.