Control of drug release kinetics from hot-melt extruded drug-loaded polycaprolactone matrices.

Sustained local delivery of meloxicam by polymeric structures is desirable for preventing subacute inflammation and biofilm formation following tissue incision or injury. Our previous study demonstrated that meloxicam release from hot-melt extruded (HME) poly(ε-caprolactone) (PCL) matrices could be controlled by adjusting the drug content. Increasing drug content accelerated the drug release as the initial drug release generated a pore network to facilitate subsequent drug dissolution and diffusion. In this study, high-resolution micro-computed tomography (HR µCT) and artificial intelligence (AI) image analysis were used to visualize the microstructure of matrices and simulate the drug release process. The image analysis indicated that meloxicam release from the PCL matrix was primarily driven by diffusion but limited by the amount of infiltrating fluid when drug content was low (i.e., the connectivity of the drug/pore network was poor). Since the drug content is not easy to change when a product has a fixed dose and dimension/geometry, we sought an alternative approach to control the meloxicam release from the PCL matrices. Here, magnesium hydroxide (Mg(OH)2) was employed as a solid porogen in the drug-PCL matrix so that Mg(OH)2 dissolved with time in the aqueous environment creating additional pore networks to facilitate local dissolution and diffusion of meloxicam. PCL matrices were produced with a fixed 30 wt% meloxicam loading and variable Mg(OH)2 loadings from 20 wt% to 50 wt%. The meloxicam release increased in proportion to the Mg(OH)2 content, resulting in almost complete drug release in 14 d from the matrix with 50 wt% Mg(OH)2. The porogen addition is a simple strategy to tune drug release kinetics, applicable to other drug-eluting matrices with similar constraints.

Development of poly(lactide-co-glycolide) microparticles for sustained delivery of meloxicam.

Poly(lactide-co-glycolide) (PLGA) polymers have been widely used for drug delivery due to their biodegradability and biocompatibility. One of the objectives of encapsulating a drug in PLGA microparticles (MPs) is to achieve an extended supply of the drug through sustained release, which can range from weeks to months. Focusing on the applications needing a relatively short-term delivery, we investigated formulation strategies to achieve a drug release from PLGA MPs for two weeks, using meloxicam as a model compound. PLGA MPs produced by the traditional oil/water (O/W) single emulsion method showed only an initial burst release with minimal increase in later-phase drug release. Alternatively, encapsulating meloxicam as solid helped reduce the initial burst release. The inclusion of magnesium hydroxide [Mg(OH)2] enhanced later-phase drug release by neutralizing the developing acidity that limited the drug dissolution. The variation of solid meloxicam and Mg(OH)2 quantities allowed for flexible control of meloxicam release, yielding MPs with distinct in vitro release kinetics. When subcutaneously injected into rats, the MPs with relatively slow in vitro drug release kinetics showed in vivo drug absorption profiles consistent with in vitro trend. However, the MPs that rapidly released meloxicam showed an attenuated in vivo absorption, suggesting premature precipitation of fast-released meloxicam. In summary, this study demonstrated the feasibility of controlling drug release from the PLGA MPs over weeks based on the physical state of the encapsulated drug and the inclusion of Mg(OH)2 to neutralize the microenvironmental pH of the MPs.

Development of hot-melt extruded drug/polymer matrices for sustained delivery of meloxicam.

For effective resolution of regional subacute inflammation and prevention of biofouling formation, we have developed a polymeric implant that can release meloxicam, a selective cyclooxygenase (COX)-2 inhibitor, in a sustained manner. Meloxicam-loaded polymer matrices were produced by hot-melt extrusion, with commercially available biocompatible polymers, poly(ε-caprolactone) (PCL), poly(lactide-co-glycolide) (PLGA), and poly(ethylene vinyl acetate) (EVA). PLGA and EVA had a limited control over the drug release rate partly due to the acidic microenvironment and hydrophobicity, respectively. PCL allowed for sustained release of meloxicam over two weeks and was used as a carrier of meloxicam. Solid-state and image analyses indicated that the PCL matrices encapsulated meloxicam in crystalline clusters, which dissolved in aqueous medium and generated pores for subsequent drug release. The subcutaneously implanted meloxicam-loaded PCL matrices in rats showed pharmacokinetic profiles consistent with their in vitro release kinetics, where higher drug loading led to faster drug release. This study finds that the choice of polymer platform is crucial to continuous release of meloxicam and the drug release rate can be controlled by the amount of drug loaded in the polymer matrices.

Recent advances in hemophilia B therapy.

Hemophilia B is a hereditary bleeding disorder caused by the deficiency in coagulation factor IX. Understanding coagulation and the role of factor IX as well as patient population and diagnosis are all critical factors in developing treatment strategies and regimens for hemophilia B patients. Current treatment options rely on protein replacement therapy by intravenous injection, which have markedly improved patient lifespan and quality of life. However, issues with current options include lack of patient compliance due to needle-based administration, high expenses, and potential other complications (e.g., surgical procedures, inhibitor formation). As a result, these treatment options are also limited to developed countries. Recent advantages in hemophilia B treatment have focused on addressing these pain points. Emerging commercial products based on modified factor IX aim to reduce injection frequency. Exploratory research efforts have focused on novel drug delivery systems for orally administered treatment and gene therapy as a potential cure. Such alternative treatment methods are promising options for hemophilia B patients worldwide.

Biodegradable hydrophilic carriers for the oral delivery of hematological factor IX for hemophilia B treatment.

Current protein replacement therapies for hemophilia B, a genetic bleeding disorder caused by a deficiency in coagulation factor IX, rely on IV injections and infusions. Oral delivery of factor IX is a desirable needle-free option, especially for prophylaxis. We have developed a biodegradable, pH-responsive hydrogel microcarrier system based on the poly(methacrylic acid)-grafted-poly(ethylene glycol) [P(MAA-g-EG)]. Incorporation of an enzymatically degradable peptide crosslinking agent allows for site-specific degradation by trypsin in the small intestine. P(MAA-g-EG) polymer was synthesized by UV polymerization, and then subsequently crosslinked with peptide crosslinking agent using EDC-NHS chemistry. Physical characterization included FTIR for determining the composition of the peptide crosslinked polymer and SEM for microparticle morphology. The pH-responsive swelling and enzyme-specific degradation were confirmed by bright-field microscopy and the corresponding kinetics were determined by turbidimetric measurements. Evaluating the drug delivery application of this degradable system, factor IX release studies showed site-specific release, and in vitro transport studies resulted in improved factor IX absorption. Incorporation of the degradable crosslinking agent significantly improved the delivery potential as compared to previously reported non-degradable drug delivery systems. Using this degradable P(MAA-g-EG) system as a delivery vehicle for factor IX can possibly lead to an orally administered prophylactic treatment for hemophilia B patients.

Design of pH-Responsive Biomaterials to Enable the Oral Route of Hematological Factor IX.

The oral administration of hematological factor IX (FIX) can offer a convenient prophylactic treatment for hemophilia B patients. pH-Responsive hydrogels based on poly(methacrylic acid)-grafted-poly(ethylene glycol) (P(MAA-g-EG)) have been engineered as delivery vehicles for FIX. In oral delivery, such hydrogel carriers protected FIX from the gastric environment and released it under intestinal conditions as demonstrated by evaluation of the loading and release of FIX. Tailoring of the hydrogel networks improved the loading of FIX within the microcarriers, which is critical for minimizing protein degradation. Optimizing the loading conditions by increasing the incubation time and using a reduced ionic strength buffer further improved the delivery potential of the microcarriers. The presence of the microcarriers significantly enhanced the oral absorption of FIX in vitro. As shown in this work, P(MAA-g-EG) microcarriers are promising candidates for the oral delivery of FIX.

Therapeutic applications of hydrogels in oral drug delivery.

INTRODUCTION: Oral delivery of therapeutics, particularly protein-based pharmaceutics, is of great interest for safe and controlled drug delivery for patients. Hydrogels offer excellent potential as oral therapeutic systems due to inherent biocompatibility, diversity of both natural and synthetic material options and tunable properties. In particular, stimuli-responsive hydrogels exploit physiological changes along the intestinal tract to achieve site-specific, controlled release of protein, peptide and chemotherapeutic molecules for both local and systemic treatment applications. AREAS COVERED: This review provides a wide perspective on the therapeutic use of hydrogels in oral delivery systems. General features and advantages of hydrogels are addressed, with more considerable focus on stimuli-responsive systems that respond to pH or enzymatic changes in the gastrointestinal environment to achieve controlled drug release. Specific examples of therapeutics are given. Last, in vitro and in vivo methods to evaluate hydrogel performance are discussed. EXPERT OPINION: Hydrogels are excellent candidates for oral drug delivery, due to the number of adaptable parameters that enable controlled delivery of diverse therapeutic molecules. However, further work is required to more accurately simulate physiological conditions and enhance performance, which is important to achieve improved bioavailability and increase commercial interest.

Terminal sterilization of alginate hydrogels: efficacy and impact on mechanical properties.

Terminal, or postprocessing, sterilization of composite biomaterials is crucial for their use in wound healing and tissue-engineered devices. Recent research has focused on optimizing traditional biomaterial formulations to create better products for commercial and academic use which incorporate hydrophobic compounds or secondary gel networks. To use a hydrogel in a clinical setting, terminal sterilization is necessary to ensure patient safety. Lyophilization, gamma-irradiation, and ethylene oxide treatment all have negative consequences when applied to alginate scaffolds for clinical use. Here, we aim to find alternative terminal sterilization methods for alginate and alginate-based composite hydrogels which maintain the structure of composite alginate networks for use in biomedical applications. A thorough investigation of the effect of common sterilization methods on swollen alginate-based hydrogels has not been reported and therefore, this work examines autoclaving, ethanol washing, and ultraviolet light as sterilization techniques for alginate and alginate/Pluronic® F68 composite hydrogels. Preservation of structural integrity is evaluated using shear rheology and analysis of water retention, and efficacy of sterilization is determined via bacterial persistence within the hydrogel. Results indicate that ethanol sterilization is the best method of those investigated because ethanol washing results in minimal effects on mechanical properties and water retention and eliminates bacterial persistence. Furthermore, this study suggests that ethanol treatment is an efficacious method for terminally sterilizing interpenetrating networks or other composite hydrogel systems.

Nucleus pulposus cells synthesize a functional extracellular matrix and respond to inflammatory cytokine challenge following long-term agarose culture.

Intervertebral disc degeneration is characterized by a cascade of cellular, biochemical and structural changes that may lead to functional impairment and low back pain. Interleukin-1 beta (IL-1ß) is strongly implicated in the etiology of disc degeneration, however there is currently no direct evidence linking IL-1ß upregulation to downstream biomechanical changes. The objective of this study was to evaluate long-term agarose culture of nucleus pulposus (NP) cells as a potential in vitro model system to investigate this. Bovine NP cells were cultured in agarose for 49 days in a defined medium containing transforming growth factor-beta 3, after which both mechanical properties and composition were evaluated and compared to native NP. The mRNA levels of NP cell markers were compared to those of freshly isolated NP cells. Glycosaminoglycan (GAG) content, aggregate modulus and hydraulic permeability of mature constructs were similar to native NP, and aggrecan and SOX9 mRNA levels were not significantly different from freshly isolated cells. To investigate direct links between IL-1ß and biomechanical changes, mature agarose constructs were treated with IL-1ß, and effects on biomechanical properties, extracellular matrix composition and mRNA levels were quantified. IL-1ß treatment resulted in upregulation of a disintegrin and metalloproteinase with thrombospondin motifs 4, matrix metalloproteinase-13 and inducible nitric oxide sythase, decreased GAG and modulus, and increased permeability. To evaluate the model as a test platform for therapeutic intervention, co-treatment with IL-1ß and IL-1 receptor antagonist (IL-1ra) was evaluated. IL-1ra significantly attenuated degradative changes induced by IL-1ß. These results suggest that this in vitro model represents a reliable and cost-effective platform for evaluating new therapies for disc degeneration.

Transport of biological molecules in surfactant-alginate composite hydrogels.

Obstructed transport of biological molecules can result in improper release of pharmaceuticals or biologics from biomedical devices. Recent studies have shown that nonionic surfactants, such as Pluronic® F68 (F68), positively alter biomaterial properties such as mesh size and microcapsule diameter. To further understand the effect of F68 (incorporated at concentrations well above the critical micelle concentration (CMC)) in traditional biomaterials, the transport properties of BSA and riboflavin were investigated in F68-alginate composite hydrogels, formed by both internal and external cross-linking with divalent cations. Results indicate that small molecule transport (represented by riboflavin) was not significantly hindered by F68 in homogeneously (internally) cross-linked hydrogels (up to an 11% decrease in loading capacity and 14% increase in effective diffusion coefficient, D(eff)), while protein transport in homogeneously cross-linked hydrogels (represented by BSA) was significantly affected (up to a 43% decrease in loading capacity and 40% increase in D(eff)). For inhomogeneously cross-linked hydrogels (externally cross-linked by CaCl(2) or BaCl(2)), the D(eff) increased up to 50 and 83% for small molecules and proteins, respectively. Variation in the alginate gelation method was shown to affect transport through measurable changes in swelling ratio (30% decrease) and observable changes in cross-linking structure as well as up to a 3.6- and 11.8-fold difference in D(eff) for riboflavin and BSA, respectively. Aside from the expected significant changes due to the cross-linking method utilized, protein transport properties were altered due to mesh size restrictions (10-25 nm estimated by mechanical properties) and BSA-F68 interaction (DLS). Taken as a whole, these results show that incorporation of a nonionic surfactant at concentrations above the CMC can affect device functionality by impeding the transport of large biological molecules.