Autoantibodies against amyloid and glial-derived antigens are increased in serum and cerebrospinal fluid of Lewy body-associated dementias.

There is increasing evidence that in Lewy body-associated dementias (encompassing Parkinson's disease with dementia (PDD) and dementia with Lewy bodies (DLB)), the adaptive immune system is altered and the degenerative process includes glial cells in addition to neuronal structures. We therefore aimed to determine levels of autoantibodies against amyloid and glial-derived structures in these dementia types. Using a newly developed Enzyme-linked immunosorbent assay (ELISA), we measured levels of IgG autoantibodies against neuronal and glial structures in serum and cerebrospinal fluid of a total of 91 subjects (13 PDD, 14 DLB, 11 Alzheimer's disease (AD), 11 frontotemporal dementia (FTD), 11 vascular dementia patients (VaD), and 31 healthy controls). Autoantibody levels against α-synuclein, amyloid-ß42 (Aß42), myelin oligodendrocyte glycoprotein (MOG), myelin basic protein (MBP), and S100B were determined. In all groups, autoantibody levels were about three magnitudes higher in serum than in CSF. Serum autoantibody levels against α-synuclein, Aß42, MOG, MBP, and S100B were higher in PDD/DLB compared to tau-associated dementias (AD, FTD), VaD, and controls, respectively, with most of them reaching highly significant p-values. In cerebrospinal fluid (CSF), levels of antibodies against oligodendrocyte-derived antigens (MOG, MBP) were significantly increased in PDD/DLB. Increased levels of autoantibodies against both neuronal- and glial-derived antigens in serum and CSF of Lewy body-associated dementias indicate an altered activity of the adaptive immune system in these dementia types. The potential of neural-derived IgG autoantibodies as part of a biomarker panel for the diagnosis of Lewy body-associated dementias should be further evaluated.

Multifunctional Poly(2-oxazoline) Nanoparticles for Biological Applications.

New multifunctional copoly(2-oxazoline) nanoparticles were prepared for cell studies. The polymer contains double-bond side chains as potential reaction sites for "thio"-click reactions as well as a fluorescein label covalently bound to the polymer backbone. Using the nanoprecipitation technique, spherical nanoparticles of 200-800 nm were obtained. Confocal laser scanning microscopy measurements revealed the cellular uptake of the nanoparticles.

Complexation of terpyridine-containing dextrans: toward water-soluble supramolecular structures.

Dextran was functionalized with 6-(2,2':6',2″-terpyridin-4'-yloxy)-hexanoic acid using two different ratios of terpyridine to dextran, leading to terpyridine-functionalized dextran esters possessing different degrees of substitution (DS = 0.23-0.41). The intra- and intermolecular complexation behavior of both functionalized biopolymers was studied using Fe(II) metal ions as well as activated Ru(III) complexes. The complexation behavior in the first case was studied by UV-visible and viscosity titration experiments. In the latter case, a water soluble comb-polymer could be obtained when using a PEG- functionalized terpyridine Ru(II) moiety for complexation. Moreover, nanoprecipitation was applied to self-assemble the functionalized dextrans into nanoparticles.

Detection of myelin autoantibodies: evaluation of an assay system for diagnosis of multiple sclerosis in differentiation from other central nervous system diseases.

BACKGROUND: Multiple sclerosis (MS) is a frequent and often severe autoimmune disease of the central nervous system. We describe a newly developed enzyme-linked immunosorbent assay (ELISA)-based test system for the assessment of neuronal autoantibodies in serum and cerebrospinal fluid (CSF). This tool could help define autoimmune status and thus be a potential means of therapeutic surveillance. METHODS: We used an assay system (ELISA, E100, Mediagnost) based on purified bovine antigens [myelin-oligodendrocyte glycoprotein (MOG), myelin basic protein (MBP), myelin-associated glycoprotein (MAG), proteolipid protein (PLP) and alpha-B-crystalline (CRY)] antibodies for the measurement of specific immunoglobulin G (IgG) and immunoglobulin M (IgM) antibodies. Assay characteristics and preliminary validation were conducted by measurement of serum and CSF samples from 41 MS patients and 128 patients with other neurological diseases (OND). RESULTS: We measured the inter- (17.8/10.1%) and intra-assay variability (5.5/6.7%); linearity (1:250- 1:16,000), and specificity of IgG and IgM. We demonstrate that by the results of this test system MS patients can be differentiated from patients with OND. CONCLUSIONS: The ELISA kit we evaluated is suitable for the measurement of neuronal autoantibodies. The initial validation demonstrates its potential use in the differential diagnosis of central neuronal system diseases.

Preparation and characterization of nanoparticles based on dextran-drug conjugates.

The presented concept combines the widely-established use of macromolecular prodrugs with nanoparticulate drug delivery devices. For this purpose, the water-soluble biopolymer dextran was functionalized with poorly water-soluble drugs (ibuprofen, naproxen) via in situ activation of the carboxylic groups with N,N(')-carbonyldiimidazole (CDI). The resulting hydrophobic derivatives self-assemble into nanoparticles with high loading efficiency during nanoprecipitation. The degree of substitution (DS) and the preparation technique strongly influence the size and the size distribution of the resulting nanoparticles. The particle suspensions remained stable over months in a pH value range between 4 and 11. Derivatives with high DS values are more stable against hydrolysis and after the addition of electrolytes than lowly substituted ones. Therefore, a defined tuning of the DS value may allow the adjustment of the pH-dependent hydrolysis rate and, hence, the release of the drugs.

Evaluation of fluorescent polysaccharide nanoparticles for pH-sensing.

The comprehensive characterization of novel dextran nanoparticles with regard to their suitability as pH-sensors for analytical applications (e.g. in physiology) is described. The nanoparticles are labeled with both a pH-indicator dye (fluorescein isothiocyanate, FITC) and a reference dye (sulforhodamine B acid chloride) as an internal standard. The fluorescence intensity of FITC increases with increasing pH, whereas the signal of the reference dye remains constant. Plotting the ratio of both signals against the pH gives a pK(a) of 6.45, which is appropriate for most of the measurement purposes. Furthermore, the influence of temperature, ionic strength and oxidizing substances on the performance of the fluorophores inside the dextran nanoparticles is examined. These results are compared to the dissolved dyes in order to evaluate if the dextran matrix affects the fluorescence properties of the sensor and the reference dye, and whether or not these nanosensors are suitable for pH-sensing in biological samples.

Determination of the surface coverage of adsorbed dextran and beta-cyclodextrin derivatives on gold by surface titration.

The self-assembly of thiophene-containing dextran and cyclodextrin derivatives on gold surfaces was investigated. Morphological studies (AFM) and the elemental characterization (XPS) of the surfaces show that the carbohydrate derivatives form either aggregates or uniform films depending on the structure and the solvent used. The real coverage of the surface, and hence the amount of unmodified free gold, was examined by a "titration" of the surface with a carboxyl-terminated SAM (11-mercaptoundecanoic acid, MUA) and with Mn-12, a manganese oxocluster. Each carboxyl group reacts with one acetate ligand of the manganese cluster, with each Mn-12 cluster capable of binding multiple MUAs, leading to defined manganese-functionalized surfaces. The weight percentage of manganese and consequently the coverage area of the carboxyl-terminated SAM is examined by XPS.

Efficient approach to design stable water-dispersible nanoparticles of hydrophobic cellulose esters.

Commercially prepared cellulose acetate, cellulose acetate propionate, -butyrate, and -phthalate as well as cellulose acetates prepared in the laboratory scale with varying degree of substitution (DS) self-assemble into regular nanoparticles, ranging in size from 86 to 368 nm, by using two different techniques of nanoprecipitation. Dialysis of polymers dissolved in N,N-dimethylacetamide results in the formation of regular nanospheres whereas the preparation in acetone by successive adding of water leads to bean-shaped particles in the nanoscale. One criterion for nanoprecipitation is the existence of dilute polymer solutions. Furthermore, the formation of nanoparticles strongly depends on DS and distribution of the substituents. Concerning this issue, quantitative (13)C NMR spectroscopy was applied for detailed structure characterization of selected cellulose acetates. The stability of the nanoparticle suspensions in the physiological pH range was observed by zeta potential measurements.

Biocompatible fluorescent nanoparticles for pH-sensoring.

Dialysis of a mixture of fluorescein and sulforhodamine B marked dextran derivatives yields biocompatible and tuneable nanosensors that can be used for ratiometric pH measurements.

Structure design of multifunctional furoate and pyroglutamate esters of dextran by polymer-analogous reactions.

Well-defined multifunctionalized dextran esters bearing photo-crosslinkable and chiral groups as well as small alkyl moieties for the adjustment of the solubility were prepared from two dextran samples with different origin and molecular weight. The examination of side structures of the starting dextran was carried out by different one- and two-dimensional NMR techniques. The main synthesis path via in situ activation of furan-2-carboxylic- and pyroglutamic acid with CDI under mild conditions gives highly functionalized dextran derivatives possessing a degree of polymerization in the range of the starting polysaccharide. The subsequent reaction with propionic anhydride leads to completely substituted, CHCl(3) soluble derivatives useful for the determination of the particular degree of substitution. By variation of the molar ratios of polymer to reagent with photo-crosslinkable- and chiral moieties during the reaction and even by subsequent peracylation, multifunctional dextran derivatives with adjustable properties like the hydrophilic/hydrophobic balance were obtained that may form biocompatible spherical nanoparticles.

Nanoparticles on the basis of highly functionalized dextrans.

New nanoparticles based on well-defined dextran esters were prepared by a dialysis process. Dextran was converted into a propionate with a degree of substitution of 1.70 and, subsequently, acylated under homogeneous reaction conditions with a pyroglutamic acid imidazolide, which is prepared in situ by conversion of pyroglutamic acid with N,N-carbonyldiimidazole. The synthesis path allows perfect control of the amphiphilicity and solubility. The highly functionalized polysaccharide derivative avoids the collapse of the nanostructure due to the prevention of hydrogen bond formation. The major fraction of the dextran propionate pyroglutamate nanoparticles investigated by SEM and AFM exhibits narrow size distribution with 370 nm as mean diameter and uniform spherical shape. The SEM image verifies that polymeric nanoparticles in the suspensions did not undergo any morphological changes within 3 weeks.